TF Drills • High Metal Removal Rates

Kennametal's KenDrill™ 3F (Three Fluted) solid carbide drills are engineered to perform at high metal removal rates across a diverse range of materials including cast iron, non-ferrous metals, and titanium alloys. With three cutting edges, these drills offer superior Metal Removal Rates (MRR). The drill’s open flute design ensures optimal chip evacuation, preventing interruption - and delivering better hole quality over two flute drills. Additionally, the 3F solid carbide drills feature three-margin lands for maintaining a stable position throughout the entire drilling process. Kennametal’s full line of KenDrill™ 3F is available in 5XD with straight shanks and with or without internal through coolant options. 

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • K Cast Iron (185)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(185)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(185)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(185)
    • N Non-Ferrous Materials (185)
      • N1
        Wrought Aluminum (165)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(185)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(185)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (165)
    • S High-Temp Alloys (178)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(178)
    Applications
    Applications
    • Convex DrillingConvex Drilling (197)
    • CornerStyle Chamfer DrillingCornerStyle Chamfer Drilling (13)
    • Cross Hole DrillingCross Hole Drilling (198)
    • DrillingDrilling (198)
    • Inclined Exit DrillingInclined Exit Drilling (198)
    • Stacked Plates DrillingStacked Plates Drilling (197)
    Cutting Diameter
    Cutting Diameter
    • 0.113 in(1)
    • 0.119 in(1)
    • 0.122 in(1)
    • 0.125 in(2)
    • 0.126 in(1)
    • 0.129 in(1)
    • 0.13 in(1)
    • 0.134 in(1)
    • 0.136 in(1)
    • 0.137 in(1)
    • 0.138 in(1)
    • 0.14 in(1)
    • 0.142 in(1)
    • 0.143 in(1)
    • 0.145 in(1)
    • 0.146 in(1)
    • 0.15 in(1)
    • 0.151 in(1)
    • 0.152 in(1)
    • 0.154 in(2)
    • 0.156 in(1)
    • 0.157 in(1)
    • 0.159 in(1)
    • 0.161 in(1)
    • 0.162 in(1)
    • 0.165 in(1)
    • 0.166 in(1)
    • 0.169 in(2)
    • 0.173 in(1)
    • 0.174 in(1)
    • 0.176 in(1)
    • 0.177 in(1)
    • 0.178 in(1)
    • 0.181 in(1)
    • 0.182 in(1)
    • 0.183 in(2)
    • 0.185 in(1)
    • 0.188 in(1)
    • 0.189 in(2)
    • 0.191 in(1)
    • 0.193 in(1)
    • 0.194 in(1)
    • 0.197 in(2)
    • 0.198 in(1)
    • 0.2 in(1)
    • 0.201 in(1)
    • 0.206 in(2)
    • 0.213 in(2)
    • 0.217 in(1)
    • 0.219 in(2)
    • 0.221 in(1)
    • 0.224 in(1)
    • 0.228 in(3)
    • 0.234 in(1)
    • 0.237 in(1)
    • 0.24 in(1)
    • 0.244 in(1)
    • 0.248 in(1)
    • 0.25 in(3)
    • 0.252 in(1)
    • 0.253 in(1)
    • 0.256 in(1)
    • 0.257 in(1)
    • 0.26 in(2)
    • 0.262 in(1)
    • 0.264 in(1)
    • 0.266 in(2)
    • 0.268 in(3)
    • 0.276 in(2)
    • 0.28 in(1)
    • 0.281 in(2)
    • 0.288 in(1)
    • 0.289 in(1)
    • 0.291 in(1)
    • 0.295 in(1)
    • 0.297 in(1)
    • 0.299 in(1)
    • 0.307 in(1)
    • 0.313 in(2)
    • 0.315 in(3)
    • 0.319 in(1)
    • 0.323 in(1)
    • 0.327 in(1)
    • 0.328 in(1)
    • 0.331 in(1)
    • 0.335 in(3)
    • 0.337 in(1)
    • 0.339 in(1)
    • 0.343 in(1)
    • 0.345 in(1)
    • 0.347 in(1)
    • 0.348 in(1)
    • 0.354 in(2)
    • 0.356 in(1)
    • 0.358 in(1)
    • 0.359 in(1)
    • 0.366 in(1)
    • 0.374 in(1)
    • 0.375 in(2)
    • 0.382 in(1)
    • 0.386 in(1)
    • 0.391 in(2)
    • 0.394 in(2)
    • 0.398 in(1)
    • 0.402 in(2)
    • 0.406 in(2)
    • 0.408 in(1)
    • 0.41 in(1)
    • 0.414 in(2)
    • 0.421 in(1)
    • 0.422 in(2)
    • 0.425 in(1)
    • 0.433 in(3)
    • 0.437 in(1)
    • 0.438 in(2)
    • 0.441 in(2)
    • 0.453 in(2)
    • 0.455 in(1)
    • 0.461 in(1)
    • 0.465 in(1)
    • 0.47 in(1)
    • 0.473 in(2)
    • 0.477 in(1)
    • 0.484 in(1)
    • 0.492 in(2)
    • 0.5 in(3)
    • 0.504 in(1)
    • 0.512 in(1)
    • 0.516 in(1)
    • 0.531 in(1)
    • 0.543 in(1)
    • 0.551 in(2)
    • 0.559 in(1)
    • 0.564 in(2)
    • 0.572 in(1)
    • 0.591 in(1)
    • 0.595 in(1)
    • 0.61 in(1)
    • 0.622 in(1)
    • 0.625 in(2)
    • 0.63 in(1)
    • 0.65 in(1)
    • 0.669 in(1)
    • 0.687 in(1)
    • 0.69 in(1)
    • 0.709 in(1)
    • 0.728 in(1)
    • 0.748 in(1)
    • 0.75 in(1)
    • 0.768 in(1)
    • 0.787 in(1)
    • 0.807 in(1)
    • 0.81 in(1)
    • 0.828 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 2.875 mm(1)
    • 3.0 mm(1)
    • 3.1 mm(1)
    • 3.176 mm(2)
    • 3.2 mm(1)
    • 3.276 mm(1)
    • 3.301 mm(1)
    • 3.401 mm(1)
    • 3.45 mm(1)
    • 3.475 mm(1)
    • 3.5 mm(1)
    • 3.551 mm(1)
    • 3.575 mm(1)
    • 3.6 mm(1)
    • 3.651 mm(1)
    • 3.7 mm(1)
    • 3.801 mm(1)
    • 3.825 mm(1)
    • 3.85 mm(1)
    • 3.901 mm(2)
    • 3.975 mm(1)
    • 4.0 mm(1)
    • 4.05 mm(1)
    • 4.101 mm(1)
    • 4.125 mm(1)
    • 4.2 mm(1)
    • 4.226 mm(1)
    • 4.3 mm(2)
    • 4.375 mm(1)
    • 4.4 mm(1)
    • 4.476 mm(1)
    • 4.5 mm(1)
    • 4.525 mm(1)
    • 4.601 mm(1)
    • 4.625 mm(1)
    • 4.65 mm(2)
    • 4.7 mm(1)
    • 4.775 mm(1)
    • 4.801 mm(2)
    • 4.851 mm(1)
    • 4.9 mm(1)
    • 4.926 mm(1)
    • 5.0 mm(2)
    • 5.025 mm(1)
    • 5.075 mm(1)
    • 5.101 mm(1)
    • 5.2 mm(2)
    • 5.4 mm(2)
    • 5.5 mm(1)
    • 5.551 mm(2)
    • 5.601 mm(1)
    • 5.7 mm(1)
    • 5.801 mm(3)
    • 5.95 mm(1)
    • 6.0 mm(1)
    • 6.101 mm(1)
    • 6.2 mm(1)
    • 6.301 mm(1)
    • 6.351 mm(3)
    • 6.4 mm(1)
    • 6.426 mm(1)
    • 6.5 mm(1)
    • 6.525 mm(1)
    • 6.601 mm(2)
    • 6.65 mm(1)
    • 6.7 mm(1)
    • 6.75 mm(2)
    • 6.801 mm(3)
    • 7.0 mm(2)
    • 7.101 mm(1)
    • 7.15 mm(2)
    • 7.301 mm(1)
    • 7.325 mm(1)
    • 7.4 mm(1)
    • 7.5 mm(1)
    • 7.551 mm(1)
    • 7.601 mm(1)
    • 7.801 mm(1)
    • 7.95 mm(2)
    • 8.0 mm(3)
    • 8.1 mm(1)
    • 8.201 mm(1)
    • 8.3 mm(1)
    • 8.326 mm(1)
    • 8.4 mm(1)
    • 8.5 mm(3)
    • 8.55 mm(1)
    • 8.6 mm(1)
    • 8.701 mm(1)
    • 8.725 mm(1)
    • 8.8 mm(1)
    • 8.826 mm(1)
    • 9.0 mm(2)
    • 9.05 mm(1)
    • 9.1 mm(1)
    • 9.125 mm(1)
    • 9.3 mm(1)
    • 9.5 mm(1)
    • 9.525 mm(2)
    • 9.701 mm(1)
    • 9.8 mm(1)
    • 9.925 mm(2)
    • 10.0 mm(2)
    • 10.101 mm(1)
    • 10.201 mm(2)
    • 10.3 mm(2)
    • 10.326 mm(1)
    • 10.4 mm(1)
    • 10.5 mm(2)
    • 10.701 mm(1)
    • 10.726 mm(2)
    • 10.8 mm(1)
    • 11.0 mm(3)
    • 11.101 mm(1)
    • 11.125 mm(2)
    • 11.201 mm(2)
    • 11.5 mm(2)
    • 11.55 mm(1)
    • 11.701 mm(1)
    • 11.8 mm(1)
    • 11.9 mm(1)
    • 12.0 mm(2)
    • 12.101 mm(1)
    • 12.3 mm(1)
    • 12.5 mm(2)
    • 12.701 mm(3)
    • 12.8 mm(1)
    • 13.0 mm(1)
    • 13.101 mm(1)
    • 13.5 mm(1)
    • 13.8 mm(1)
    • 14.0 mm(2)
    • 14.201 mm(1)
    • 14.3 mm(2)
    • 14.5 mm(1)
    • 15.0 mm(1)
    • 15.101 mm(1)
    • 15.5 mm(1)
    • 15.8 mm(1)
    • 15.875 mm(2)
    • 16.0 mm(1)
    • 16.5 mm(1)
    • 17.0 mm(1)
    • 17.45 mm(1)
    • 17.5 mm(1)
    • 18.0 mm(1)
    • 18.5 mm(1)
    • 19.0 mm(1)
    • 19.05 mm(1)
    • 19.5 mm(1)
    • 20.0 mm(1)
    • 20.5 mm(1)
    • 20.576 mm(1)
    • 21.0 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 21.401 mm(12)
    • 23.0 mm(9)
    • 28.6 mm(10)
    • 29.0 mm(11)
    • 34.9 mm(12)
    • 35.0 mm(14)
    • 40.301 mm(11)
    • 43.0 mm(23)
    • 48.7 mm(8)
    • 49.0 mm(20)
    • 53.1 mm(7)
    • 55.6 mm(6)
    • 56.0 mm(20)
    • 60.0 mm(13)
    • 63.0 mm(7)
    • 64.5 mm(2)
    • 71.0 mm(4)
    • 73.0 mm(1)
    • 74.5 mm(1)
    • 77.0 mm(4)
    • 78.0 mm(1)
    • 85.0 mm(2)
    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 0.843 in(12)
    • 0.906 in(9)
    • 1.127 in(10)
    • 1.143 in(11)
    • 1.374 in(12)
    • 1.379 in(14)
    • 1.587 in(11)
    • 1.693 in(23)
    • 1.917 in(8)
    • 1.929 in(20)
    • 2.091 in(7)
    • 2.189 in(6)
    • 2.205 in(20)
    • 2.362 in(13)
    • 2.48 in(7)
    • 2.539 in(2)
    • 2.795 in(4)
    • 2.874 in(1)
    • 2.934 in(1)
    • 3.031 in(4)
    • 3.071 in(1)
    • 3.346 in(2)
    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
    Reach
    Reach
    • 1.063 in(12)
    • 1.102 in(9)
    • 1.379 in(10)
    • 1.417 in(11)
    • 1.693 in(12)
    • 1.732 in(14)
    • 1.969 in(11)
    • 2.087 in(23)
    • 2.362 in(8)
    • 2.402 in(20)
    • 2.598 in(7)
    • 2.757 in(6)
    • 2.795 in(20)
    • 2.992 in(2)
    • 3.031 in(11)
    • 3.228 in(2)
    • 3.269 in(7)
    • 3.622 in(1)
    • 3.661 in(4)
    • 3.74 in(1)
    • 3.938 in(1)
    • 3.976 in(4)
    • 4.409 in(2)
    Reach MintoReach Max
    Reach
    Reach
    • 27.0 mm(12)
    • 28.0 mm(9)
    • 35.0 mm(10)
    • 36.0 mm(11)
    • 43.0 mm(12)
    • 44.0 mm(14)
    • 50.0 mm(11)
    • 53.0 mm(23)
    • 60.0 mm(8)
    • 61.0 mm(20)
    • 66.0 mm(7)
    • 70.0 mm(6)
    • 71.0 mm(20)
    • 76.0 mm(2)
    • 77.0 mm(11)
    • 82.0 mm(2)
    • 83.0 mm(7)
    • 92.0 mm(1)
    • 93.0 mm(4)
    • 95.0 mm(1)
    • 100.0 mm(1)
    • 101.0 mm(4)
    • 112.0 mm(2)
    Reach MintoReach Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.598 in(21)
    • 2.914 in(21)
    • 3.228 in(25)
    • 3.583 in(30)
    • 3.74 in(1)
    • 4.055 in(26)
    • 4.134 in(1)
    • 4.331 in(3)
    • 4.37 in(5)
    • 4.646 in(24)
    • 4.803 in(1)
    • 4.882 in(12)
    • 4.921 in(1)
    • 5.236 in(10)
    • 5.551 in(1)
    • 5.63 in(6)
    • 5.827 in(1)
    • 6.024 in(5)
    • 6.102 in(1)
    • 6.575 in(2)
    • 6.732 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 66.0 mm(21)
    • 74.0 mm(21)
    • 82.0 mm(25)
    • 91.0 mm(30)
    • 95.0 mm(1)
    • 103.0 mm(26)
    • 105.0 mm(1)
    • 110.0 mm(3)
    • 111.0 mm(5)
    • 118.0 mm(24)
    • 122.0 mm(1)
    • 124.0 mm(12)
    • 125.0 mm(1)
    • 133.0 mm(10)
    • 141.0 mm(1)
    • 143.0 mm(6)
    • 148.0 mm(1)
    • 153.0 mm(5)
    • 155.0 mm(1)
    • 167.0 mm(2)
    • 171.0 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    Application
    Coating
    Coating
    • TiAlN (20)
    • Uncoated (178)
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K10 (165)
    • K715 (13)
    • KC7210 (20)
    Back-End
    Back-End Diameter
    Back-End Diameter
    • 4.775 mm(24)
    • 6.0 mm(31)
    • 6.351 mm(13)
    • 7.95 mm(12)
    • 8.0 mm(22)
    • 9.525 mm(8)
    • 10.0 mm(19)
    • 11.125 mm(8)
    • 12.0 mm(20)
    • 12.701 mm(6)
    • 14.0 mm(11)
    • 14.3 mm(2)
    • 15.875 mm(2)
    • 16.0 mm(7)
    • 17.45 mm(1)
    • 18.0 mm(4)
    • 19.05 mm(1)
    • 20.0 mm(6)
    • 20.625 mm(1)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.188 in(24)
    • 0.237 in(31)
    • 0.25 in(13)
    • 0.313 in(12)
    • 0.315 in(22)
    • 0.375 in(8)
    • 0.394 in(19)
    • 0.438 in(8)
    • 0.473 in(20)
    • 0.5 in(6)
    • 0.551 in(11)
    • 0.564 in(2)
    • 0.625 in(2)
    • 0.63 in(7)
    • 0.687 in(1)
    • 0.709 in(4)
    • 0.75 in(1)
    • 0.787 in(6)
    • 0.812 in(1)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?