KenCut™ ALR • SFRHEC • Chamfered • 3 Flutes • Weldon® Shank • Inch
Producto similar a:
KenCut™ ALR • SFRHEC • Chamfered • 3 Flutes • Weldon® Shank • Inch
Solid Carbide End Mill for Aluminum Roughing
Número de material100003805
Póngase en contacto con nuestro equipo de ventas para descubrir todas sus opciones de precios
Features and benefits
- Centre cutting for plunging and ramping operations.
- Solid carbide end mill with cord profile, for low cutting forces and low power consumption.
Rectificado en rampa: Material en bruto
Ranurado: Placa cuadrada
Fresado lateral/Fresado en escuadra: Placa cuadrada
Dimensiones de la herramienta: Configuración del canal: 3
Ángulo de la hélice: 30°
Estilo de esquina: Bisel en esquina
| Tolerancias de fresas de mango | |||
| D1 | Tolerancia d11 | D | Tolerancia h6 + / - |
| 1/8" | -.0008/-.0031" | 1/8" | +0/-.00024" |
| 1/8–7/32" | -.0012/-.0041" | 1/8–7/32" | +0/-.00031" |
| 1/4–3/8" | -.0016/-.0051" | 1/4–3/8" | +0/-.00035" |
| 13/32–11/16" | -.002/-.0063" | 13/32–11/16" | +0/-.00043" |
| 23/32–1-3/16" | -.0026/-.0077" | 23/32–1-3/16" | +0/-.00051" |
 |  |  | |||||||||||
| Fresado lateral (A) y ranurado (B) | |||||||||||||
| K600/KC625M | Feed per Tooth — fz information is for side milling (A). For slotting (B), reduce fz by 20%. | ||||||||||||
| A | B | Velocidad de corte | D1 | ||||||||||
| 1/4 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | ||||||||
| Grupo de materiales | ap | ae | ap | min | max | inch | 0.250 | 0.375 | 0.500 | 0.625 | 0.750 | 1.000 | |
| N | 1 | 1.25XD | 0.5XD | 1XD | 1650 | 6500 | fz | 0.0028 | 0.0041 | 0.0055 | 0.0070 | 0.0085 | 0.0110 |
| 2 | 1.25XD | 0.5XD | 1XD | 1650 | 5050 | fz | 0.0025 | 0.0037 | 0.0050 | 0.0060 | 0.0075 | 0.0010 | |