Le damos la bienvenida
Confirme sus preferencias
Actualizar preferencias

Sugerencias de productos

Product Family suggestions

Kennametal a su servicio

Atención al cliente

Encuentre los datos de contacto de los centros de atención al cliente de todo el mundo

Pedido rápido
Artículo(s) añadido correctamente al carrito
Ver carrito

Kennametal a su servicio

Atención al cliente

Encuentre los datos de contacto de los centros de atención al cliente de todo el mundo

Artículo(s) añadido correctamente al carrito
Ver carrito
Exit Search Volver a la solución

Edición de la solución

Añadiendo solución

Nombre de la solución:{{SolutionName}}

    Producto similar a:

    Volver a | Modificación Similar a

    Plaquitas KenTIP™ FS • DAL

    Plaquitas KenTIP™ FS • DAL

    Número de material100160766

    Plaquitas KenTIP™ FS • DAL
    Plaquitas KenTIP™ FS • DAL
    Plaquitas KenTIP™ FS • DAL
    Plaquitas KenTIP™ FS • DAL
    Open expanded view
    Plaquitas KenTIP™ FS • DAL
    Plaquitas KenTIP™ FS • DAL
    Plaquitas KenTIP™ FS • DAL
    Representación general
    Póngase en contacto con nuestro equipo de ventas para descubrir todas sus opciones de precios

    Features and benefits

    • Geometría de punta DAL para pilas de CFRP con salida de metal (CFRP-Al y CFRP-Ti), aleaciones de alta temperatura y metales no ferrosos
    • Geometría de doble ángulo con ángulo de la punta de 128° y 155° para minimizar las rebabas de las salidas
    • KCC10 (recubrimiento de diamante) proporciona un equilibrio perfecto entre tenacidad y resistencia al desgaste abrasivo al taladrar pilas de CFRP
    • KN15 (sin recubrimiento) que permite un mecanizado rentable de materiales no ferrosos con canales ultrapulidos para reducir la acumulación de material
    • Plaquitas con orificios de refrigerante interno
    • DrillingDrilling
    • Drilling: Stacked PlatesDrilling: Stacked Plates
    • Avellanado/BiseladoAvellanado/Biselado
    • Dimensiones de la herramienta: 2 canales/2 márgenes/refrigeranteDimensiones de la herramienta: 2 canales/2 márgenes/refrigerante
    Tolerance • Metric
    D1 metrictolerance n8
    6+0,008/ +0,026
    6–10+0,010/ +0,032
    10–18+0,012/ +0,039
    18–26+0,015/ +0,048
    Tolerance • Inch
    D1 inchtolerance n8
    0.2362+0.00031/ +0.00102
    0.2362–0.3937+0.00039/ +0.00126
    0.3937–0.7087+0.00047/ +0.00154
    0.7087–1.0236+0.00059/ +0.00189
    Application Data B27_HPR Series Grade KCK10A • Through Coolant • Inch
    KCK10AFeed rate (f) = IPR by diameter
    Velocidad de corte vc SFM1/83/161/45/163/81/29/165/8
    Grupo de materialesMínValor inicialMáx..125.188.250.313.375.500.551.625
    P
    P03303304100.005 0.0060.006 0.0060.006 0.0080.008 0.010.008 0.0120.01 0.0140.012 0.0160.013 0.018
    P13003303600.006 0.0070.006 0.0080.007 0.010.009 0.0120.01 0.0150.012 0.0170.014 0.0190.016 0.021
    P23003303600.006 0.0070.006 0.0080.007 0.010.009 0.0120.01 0.0150.012 0.0170.014 0.0190.016 0.021
    P32603103600.006 0.0070.006 0.0080.007 0.010.009 0.0120.01 0.0150.012 0.0170.014 0.0190.016 0.021
    P42603003600.006 0.0070.006 0.0080.007 0.010.009 0.0120.01 0.0150.012 0.0170.014 0.0190.016 0.021
    P52002603000.001 0.0040.002 0.0040.002 0.0040.002 0.0060.003 0.0070.004 0.0080.005 0.0090.006 0.009
    P62002302600.001 0.0040.002 0.0040.002 0.0040.002 0.0060.003 0.0070.004 0.0080.005 0.0090.006 0.009
    K
    K1260330390.006 .008.007 .008.008 .010.009 .013.011 .016.013 .018.015 .021.018 .023
    K2260300330.006 .007.006 .008.007 .010.009 .012.010 .015.012 .017.014 .019.016 .021
    K3200300390.006 .007.006 .008.007 .010.009 .012.010 .015.012 .017.014 .019.016 .021
    For MQL applications in P1-P4: Vc: 50% of through coolant data; f: 120% of through hole coolant data
    Grupo de materialesVelocidad de corte vcPulgadas
    Rango SFMAvance recomendado por rev.
    MínValor inicialMáx..236.315.394.472.551.630.787.9451.023
    P0315415575IPR.004 .007.004 .009.005 .012.006 .015.007 .016.007 .018.009 .020.011 .023.011 .024
    1300430560IPR.004 .007.004 .009.005 .012.006 .015.007 .016.007 .018.009 .020.011 .023.011 .024
    2330460590IPR.004 .009.004 .010.005 .013.006 .016.007 .018.007 .019.009 .022.011 .025.011 .026
    3200330430IPR.004 .011.004 .012.005 .014.006 .016.006 .017.007 .018.009 .020.012 .022.012 .023
    4200330430IPR.004 .011.004 .012.005 .014.006 .016.006 .017.007 .018.009 .020.010 .022.010 .023
    5200260330IPR.004 .007.004 .009.004 .011.005 .013.006 .015.006 .016.008 .018.009 .020.010 .021
    6200230260IPR.004 .007.004 .009.004 .011.005 .013.006 .015.006 .016.008 .018.009 .020.010 .021
    K1260400560IPR.005 .011.005 .013.006 .015.007 .017.009 .019.010 .022.012 .025.014 .030.015 .031
    2260360390IPR.005 .011.005 .013.006 .015.007 .017.009 .019.010 .022.012 .025.014 .030.015 .031
    3160260330IPR.004 .009.005 .010.005 .013.006 .014.007 .016.008 .018.011 .021.013 .025.013 .026
    Grupo de materialesVelocidad de corte vcSistema métrico
    Rango m/minAvance recomendado por rev.
    MínValor inicialMáx.6,08,010,012,014,016,020,024,026,0
    P095125175mm/r0,10 0,190,11 0,220,13 0,300,15 0,370,17 0,410,19 0,450,24 0,520,28 0,600,29 0,62
    190130170mm/r0,10 0,190,11 0,220,13 0,300,15 0,370,17 0,410,19 0,450,24 0,520,28 0,600,29 0,62
    2100140180mm/r0,10 0,190,11 0,260,13 0,340,15 0,410,17 0,450,19 0,490,24 0,560,28 0,640,29 0,62
    360100130mm/r0,10 0,170,11 0,310,12 0,360,14 0,410,16 0,440,18 0,460,23 0,510,30 0,560,31 0,58
    460100130mm/r0,10 0,170,11 0,310,12 0,360,14 0,410,16 0,440,18 0,460,23 0,510,25 0,560,26 0,58
    56080100mm/r0,09 0,160,10 0,220,11 0,280,12 0,340,14 0,370,16 0,400,20 0,460,24 0,520,25 0,54
    6607080mm/r0,09 0,160,10 0,220,11 0,280,12 0,340,14 0,370,16 0,400,20 0,460,24 0,520,25 0,54
    K180120170mm/r0,12 0,210,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    280110120mm/r0,12 0,210,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    35080100mm/r0,11 0,190,13 0,270,15 0,330,17 0,370,19 0,420,21 0,460,28 0,540,32 0,630,33 0,66
    Grupo de materialesVelocidad de corte vcSistema métrico
    Rango m/minAvance recomendado por rev.
    MínValor inicialMáx.6,08,010,012,014,016,020,024,026,0
    P095125175mm/r0,10 0,190,11 0,220,13 0,300,15 0,370,17 0,410,19 0,450,24 0,520,28 0,600,29 0,62
    190130170mm/r0,10 0,190,11 0,220,13 0,300,15 0,370,17 0,410,19 0,450,24 0,520,28 0,600,29 0,62
    2100140180mm/r0,10 0,190,11 0,260,13 0,340,15 0,410,17 0,450,19 0,490,24 0,560,28 0,640,29 0,62
    360100130mm/r0,10 0,170,11 0,310,12 0,360,14 0,410,16 0,440,18 0,460,23 0,510,30 0,560,31 0,58
    460100130mm/r0,10 0,170,11 0,310,12 0,360,14 0,410,16 0,440,18 0,460,23 0,510,25 0,560,26 0,58
    56080100mm/r0,09 0,160,10 0,220,11 0,280,12 0,340,14 0,370,16 0,400,20 0,460,24 0,520,25 0,54
    6607080mm/r0,09 0,160,10 0,220,11 0,280,12 0,340,14 0,370,16 0,400,20 0,460,24 0,520,25 0,54
    K180120170mm/r0,12 0,210,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    280110120mm/r0,12 0,210,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    35080100mm/r0,11 0,190,13 0,270,15 0,330,17 0,370,19 0,420,21 0,460,28 0,540,32 0,630,33 0,66
    Grupo de materialesVelocidad de corte vcSistema métrico
    Rango m/minAvance recomendado por rev.
    MínValor inicialMáx.6,08,010,012,014,016,020,024,026,0
    M1506090mm/r0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    2306090mm/r0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    3205060mm/r0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    Grupo de materialesVelocidad de corte vcPulgadas
    Rango SFMAvance recomendado por rev.
    MínValor inicialMáx..236.315.394.472.551.630.787.9451.023
    M1160200300IPR.003 .005.003 .006.004 .007.004 .008.005 .009.005 .009.006 .011.007 .013.008 .013
    2100200300IPR.003 .005.003 .006.004 .007.004 .008.005 .009.005 .009.006 .011.007 .013.008 .013
    370160200IPR.003 .005.003 .006.004 .007.004 .008.005 .009.005 .009.006 .011.007 .013.008 .013
    Grupo de materialesVelocidad de corte vcSistema métrico
    Rango m/minAvance recomendado por rev.
    MínValor inicialMáx.6,08,010,012,014,016,020,024,026,0
    M1506090mm/r0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    2306090mm/r0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    3205060mm/r0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    Grupo de materialesVelocidad de corte vcSistema métrico
    Rango m/minAvance recomendado por rev.
    MínValor inicialMáx.6,08,010,012,014,016,020,024,026,0
    K1100175200mm/r0,12 0,290,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    2100160180mm/r0,12 0,290,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    37085120mm/r0,11 0,230,13 0,270,15 0,330,17 0,370,19 0,420,21 0,460,28 0,540,32 0,630,33 0,66
    Grupo de materialesVelocidad de corte vcPulgadas
    Rango SFMAvance recomendado por rev.
    MínValor inicialMáx..236.315.394.472.551.630.787.9451.023
    K1330570660IPR.005 .011.005 .013.006 .015.007 .017.009 .019.010 .022.012 .025.014 .030.015 .031
    2330520590IPR.005 .011.005 .013.006 .015.007 .017.009 .019.010 .022.012 .025.014 .030.015 .031
    3230280390IPR.004 .009.005 .010.005 .013.006 .014.007 .016.008 .018.011 .021.013 .025.013 .026
    Grupo de materialesVelocidad de corte vcSistema métrico
    Rango m/minAvance recomendado por rev.
    MínValor inicialMáx.6,08,010,012,014,016,020,024,026,0
    K1100175200mm/r0,12 0,290,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    2100160180mm/r0,12 0,290,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    37085120mm/r0,11 0,230,13 0,270,15 0,330,17 0,370,19 – 0,420,21 0,460,28 0,540,32 0,630,33 0,66
    Grupo de materialesVelocidad de corte vcSistema métrico
    Rango m/minAvance recomendado por rev.
    MínValor inicialMáx.6,08,010,012,016,020,0
    S4101320mm/r0,02–0,080,03–0,100,04–0,120,05–0,160,05–0,180,06–0,20
    N1100230270mm/r0,13–0,220,16–0,240,20–0,280,24–0,320,28–0,400,32–0,48
    2100220270mm/r0,14–0,230,16–0,280,20–0,320,24–0,360,28–0,400,32–0,52
    390180230mm/r0,13–0,220,16–0,240,20–0,280,24–0,320,28–0,400,32–0,48
    490130200mm/r0,10–0,180,16–0,280,20–0,320,24–0,360,28–0,400,32–0,52
    C270110140mm/r0,03-0,100,04-0,120,05-0,150,05-0,180,06-0,210,07-0,23
    3101320mm/r0,02-0,080,03-0,100,04-0,120,05-0,160,05-0,180,06-0,20
    4102040mm/r0,02-0,080,03-0,100,04-0,120,05-0,160,05-0,180,06-0,20
    Grupo de materialesVelocidad de corte vcPulgadas
    Rango SFMAvance recomendado por rev.
    MínValor inicialMáx.1/4 0,2505/16 0,3133/8 0,3751/2 0,5005/8 0,6253/4 0,750
    S4304070IPR0.001–0.0030.001–0.0040.002–0.0050.002–0.0060.002–0.0070.002–0.008
    N1330750890IPR0.005–0.0090.006–0.0090.008–0.0110.009–0.0130.011–0.0160.013–0.019
    2330720890IPR0.006–0.0090.006–0.0110.008–0.0130.009–0.0140.011–0.0170.013–0.021
    3300590750IPR0.005–0.0090.006–0.0090.008–0.0110.009–0.0130.011–0.0160.013–0.019
    4300430660IPR0.004–0.0070.006–0.0110.008–0.0130.009–0.0140.011–0.0160.013–0.019
    C4230360460IPR0.001-0.0040.002-0.0050.002-0.0060.002-0.0070.002-0.0080.003-0.009
    4304070IPR0.001-0.0030.001-0.0040.002-0.0050.002-0.0060.002-0.0070.002-0.008
    43070130IPR0.001-0.0030.001-0.0040.002-0.0050.002-0.0060.002-0.0070.002-0.008
    Grupo de materialesVelocidad de corte vcSistema métrico
    Rango m/minAvance recomendado por rev.
    MínValor inicialMáx.6.08.010.012.016.020.0
    S4101320mm/r0.02～0.080.03～0.100.04～0.120.05～0.160.05～0.180.06～0.20
    N1100230270mm/r0.13～0.220.16～0.240.20～0.280.24～0.320.28～0.400.32～0.48
    2100220270mm/r0.14～0.230.16～0.280.20～0.320.24～0.360.28～0.400.32～0.52
    390180230mm/r0.13～0.220.16～0.240.20～0.280.24～0.320.28～0.400.32～0.48
    490130200mm/r0.10～0.180.16～0.280.20～0.320.24～0.360.28～0.400.32～0.52
    C270110140mm/r0.03～0.100.04～0.120.05～0.150.05～0.180.06～0.210.07～0.23
    3101320mm/r0.02～0.080.03～0.100.04～0.120.05～0.160.05～0.180.06～0.20
    4102040mm/r0.02～0.080.03～0.100.04～0.120.05～0.160.05～0.180.06～0.20
    Grupo de materialesVelocidad de corte vcPulgadas
    Rango SFMAvance recomendado por rev.
    MínValor inicialMáx.1/4 0,2505/16 0,3133/8 0,3751/2 0,5005/8 0,6253/4 0,750
    C1260330490IPR0,002 0,0080,002 0,0080,002 0,0080,002 0,0080,002 0,0080,002 0,008
    Grupo de materialesVelocidad de corte vcSistema métrico
    Rango m/minAvance recomendado por rev.
    MínValor inicialMáx.6,08,010,012,016,020,0
    C180100150mm/r0,05 0,200,05 0,200,05 0,200,05 0,200,05 0,200,05 0,20
    Grupo de materialesVelocidad de corte vcSistema métrico
    Rango m/minAvance recomendado por rev.
    MínValor inicialMáx.6,08.010.012.016.020.0
    C180100150mm/r0.05～0.200.05～0.200.05～0.200.05～0.200.05～0.200.05～0.20
    Grupo de materialesVelocidad de corte vcSistema métrico
    Rango m/minAvance recomendado por rev.
    MínValor inicialMáx.6,08,010,012,014,016,020,024,026,0
    P0110140170mm/r0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    1110140170mm/r0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    2100120140mm/r0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    380100120mm/r0,10–0,170,11–0,200,12–0,220,14–0,240,16–0,260,18–0,280,20–0,310,21–0,350,22–0,36
    47090110mm/r0,10–0,170,11–0,200,12–0,220,14–0,240,16–0,260,18–0,280,20–0,310,21–0,350,22–0,36
    56080100mm/r0,09–0,160,10–0,180,11–0,200,13–0,220,15–0,240,16–0,260,18–0,290,19–0,330,20–0,34
    66080100mm/r0,09–0,160,10–0,180,11–0,200,13–0,220,15–0,240,16–0,260,18–0,290,19–0,330,20–0,34
    M1406080mm/r0,07–0,120,08–0,140,09–0,160,11–0,180,12–0,200,13–0,220,14–0,240,15–0,260,16–0,27
    2355570mm/r0,07–0,120,08–0,140,09–0,160,11–0,180,12–0,200,13–0,220,14–0,240,15–0,260,16–0,27
    K190120175mm/r0,12-0,210,14-0,240,16-0,280,18-0,320,20-0,360,22-0,400,25-0,440,28-0,480,29-0,50
    280110140mm/r0,12–0,210,14–0,240,16–0,280,18–0,320,20–0,360,22–0,400,25–0,440,28–0,480,29–0,50
    37080100mm/r0,11-0,190,13-0,220,14-0,250,16-0,280,18-0,320,21-0,360,23-0,400,26-0,440,27-0,46
    Grupo de materialesVelocidad de corte vcPulgadas
    Rango SFMAvance recomendado por rev.
    MínValor inicialMáx..236.315.394.472.551.630.787.9451.023
    P0360460560IPR0.004–0.0070.004–0.0090.005–0.0090.006–0.0100.007–0.0110.007–0.0120.008–0.0130.009–0.0150.009–0.016
    1360460560IPR0.004–0.0070.004–0.0090.005–0.0090.006–0.0100.007–0.0110.007–0.0120.008–0.0130.009–0.0150.009–0.016
    2330400460IPR0.004–0.0070.004–0.0090.005–0.0090.006–0.0100.007–0.0110.007–0.0120.008–0.0130.009–0.0150.009–0.016
    3260330400IPR0.004–0.0070.004–0.0080.005–0.0090.006–0.0090.006–0.0100.007–0.0110.008–0.0120.008–0.0140.009–0.014
    4230330360IPR0.004–0.0070.004–0.0080.005–0.0090.006–0.0090.006–0.0100.007–0.0110.008–0.0120.008–0.0140.009–0.014
    5200260330IPR0.004–0.0060.004–0.0070.004–0.0080.005–0.0090.006–0.0090.006–0.0100.007–0.0110.007–0.0130.008–0.013
    6200260330IPR0.004–0.0060.004–0.0070.004–0.0080.005–0.0090.006–0.0090.006–0.0100.007–0.0110.007–0.0130.008–0.013
    M1130200260IPR0.003–0.0050.003–0.0060.004–0.0060.004–0.0070.005–0.0080.005–0.0090.006–0.0090.006–0.0100.006–0.011
    2120180230IPR0.003–0.0050.003–0.0060.004–0.0060.004–0.0070.005–0.0080.005–0.0090.006–0.0090.006–0.0100.006–0.011
    K1300400580IPR0.005-0.0080.006-0.0090.006-0.0110.007-0.0130.008-0.0140.009-0.0160.010-0.0170.011-0.0190.011-0.020
    2260360460IPR0.005–0.0080.006–0.0090.006–0.0110.007–0.0130.008–0.0140.009–0.0160.010–0.0170.011–0.0190.011–0.020
    3230260330IPR0.004-0.0070.005-0.0090.006-0.0100.006-0.0110.007-0.0130.008-0.0140.009-0.0160.010-0.0170.011-0.018
    Grupo de materialesVelocidad de corte vcSistema métrico
    Rango m/minAvance recomendado por rev.
    MínValor inicialMáx.6,08,010,012,014,016,020,024,026,0
    P0110140170mm/r0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    1110140170mm/r0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    2100120140mm/r0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    380100120mm/r0,10–0,170,11–0,200,12–0,220,14–0,240,16–0,260,18–0,280,20–0,310,21–0,350,22–0,36
    47090110mm/r0,10–0,170,11–0,200,12–0,220,14–0,240,16–0,260,18–0,280,20–0,310,21–0,350,22–0,36
    56080100mm/r0,09–0,160,10–0,180,11–0,200,13–0,220,15–0,240,16–0,260,18–0,290,19–0,330,20–0,34
    66080100mm/r0,09–0,160,10–0,180,11–0,200,13–0,220,15–0,240,16–0,260,18–0,290,19–0,330,20–0,34
    M1406080mm/r0,07–0,120,08–0,140,09–0,160,11–0,180,12–0,200,13–0,220,14–0,240,15–0,260,16–0,27
    2355570mm/r0,07–0,120,08–0,140,09–0,160,11–0,180,12–0,200,13–0,220,14–0,240,15–0,260,16–0,27
    K190120175mm/r0,12-0,210,14-0,240,16-0,280,18-0,320,20-0,360,22-0,400,25-0,440,28-0,480,29-0,50
    280110140mm/r0,12–0,210,14–0,240,16–0,280,18–0,320,20–0,360,22–0,400,25–0,440,28–0,480,29–0,50
    37080100mm/r0,11-0,190,13-0,220,14-0,250,16-0,280,18-0,320,21-0,360,23-0,400,26-0,440,27-0,46
    Está a punto de añadir a su página Mis soluciones. ¿Desea continuar?
    Select the destination where you want to move a.
    Nuevo Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Introduzca un nombre válido
    product-image
    Please adjust the following properties from

    ISO catálogo

    ANSI catálogo

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Debe iniciar sesión para ver la información de su panel de control
    Session expired due to inactivity, please login again
    El/los producto/s () que estaba intentando añadir al carrito no está/están disponibles Contacto del servicio de atención al cliente.
    artículo(s) añadido(s) correctamente al carrito
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO catálogo Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk