Taladrado
Taladrado: Salida inclinada
Taladrado: Placas apiladas
Dimensiones de la herramienta: 2 canales/4 márgenes/refrigerante
Número DIN 6535
Taladrado — Con refrigeración interna
Con refrigeración interna: MQL (cantidad mínima de lubricante): Taladrado
Mango — Liso cilíndrico ≤h6
Ángulo de la hélice: 30°
Profundidad de taladrado: 12x
Drilling: Cross-Hole DrillingDownloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 4169243 |
| Referencia ISO | B269A04000HP |
| Referencia ANSI | B269A04000HP |
| Calidad | KCPK15 |
| Diámetro de broca M [D1] | 4 mm |
| Diámetro de broca M [D1] | .1575 in |
| Longitud total [L] | 107 mm |
| Longitud total [L] | 4.212 in |
| Longitud del canal [L3] | 66 mm |
| Longitud del canal [L3] | 2.598 in |
| Profundidad máxima de taladrado [L4] | 56 mm |
| Profundidad máxima de taladrado [L4] | 2.204 in |
| Longitud de punta de broca [L5] | 0.75 mm |
| Longitud de punta de broca [L5] | .0295 in |
| Longitud de mango [LS] | 36 mm |
| Longitud de mango [LS] | 1.417 in |
| Adaptador/Mango/Diá int [D] | 6 mm |
| Adaptador/Mango/Diá int [D] | .2362 in |
TaladradoTaladrado: Salida inclinadaTaladrado: Placas apiladasDimensiones de la herramienta: 2 canales/4 márgenes/refrigeranteNúmero DIN 6535Taladrado — Con refrigeración internaCon refrigeración interna: MQL (cantidad mínima de lubricante): TaladradoMango — Liso cilíndrico ≤h6Ángulo de la hélice: 30°Profundidad de taladrado: 12xDrilling: Cross-Hole DrillingGrades
KCPK15
Composición: Metal duro de grano fino con recubrimiento de PVD AlCrN multicapa con excelente acabado superficial.
Aplicación: Primera opción para aceros aleados y muy aleados así como fundición. Una condición superficial de última generación que permite una excelente evacuación de las virutas y ofrece el máximo nivel de resistencia al desgaste en tasas de evacuación de material mejoradas.
Crear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Tolerancia • Pulgadas | ||||
| gama de tamaños nominales | D1 tolerancia m7 | |||
| .0394–.1181 | .0000/-.0004 | .0000/-.0006 | ||
| .0002/.0006 | .0000/-.0003 | |||
| .0002/.0008 | .0000/-.0004 | |||
| .0003/.0010 | .0000/-.0004 | |||
| Grupo de materiales |  |  |  | ||||||||||
| Grupo de materiales | Velocidad de corte | Pulgadas | |||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Mín | Valor inicial | Máx. | 1/8 0.125 | 3/16 0.188 | 1/4 0.250 | 5/16 0.313 | 3/8 0.375 | 1/2 0.500 | 5/8 0.625 | 3/4 0.750 | |||
| P | 0 | 360 | 460 | 560 | IPR | 0.004–0.006 | 0.005–0.008 | 0.006–0.008 | 0.007–0.010 | 0.010–0.011 | 0.008–0.014 | 0.009–0.017 | 0.011–0.019 |
| 1 | 330 | 470 | 490 | IPR | 0.005–0.007 | 0.006–0.009 | 0.007–0.009 | 0.008–0.011 | 0.011–0.013 | 0.009–0.016 | 0.011–0.020 | 0.013–0.022 | |
| 2 | 230 | 330 | 360 | IPR | 0.005–0.007 | 0.005–0.008 | 0.006–0.010 | 0.009–0.013 | 0.009–0.015 | 0.011–0.020 | 0.013–0.025 | 0.015–0.030 | |
| 3 | 230 | 300 | 360 | IPR | 0.005–0.007 | 0.006–0.009 | 0.007–0.009 | 0.008–0.011 | 0.011–0.013 | 0.009–0.016 | 0.011–0.020 | 0.013–0.022 | |
| 4 | 200 | 230 | 300 | IPR | 0.004–0.006 | 0.004–0.008 | 0.006–0.008 | 0.007–0.009 | 0.007–0.010 | 0.008–0.013 | 0.009–0.016 | 0.010–0.018 | |
| 5 | 200 | 260 | 300 | IPR | 0.001–0.004 | 0.002–0.004 | 0.002–0.004 | 0.002–0.006 | 0.003–0.007 | 0.004–0.008 | 0.006–0.009 | 0.006–0.010 | |
| 6 | 260 | 490 | 520 | IPR | 0.003–0.005 | 0.004–0.004 | 0.005–0.008 | 0.006–0.011 | 0.007–0.013 | 0.008–0.015 | 0.009–0.017 | 0.010–0.019 | |
| M | 1 | 160 | 200 | 260 | IPR | 0.002–0.003 | 0.002–0.005 | 0.003–0.006 | 0.004–0.007 | 0.005–0.008 | 0.005–0.009 | 0.006–0.009 | 0.007–0.011 |
| 2 | 130 | 160 | 260 | IPR | 0.002–0.003 | 0.002–0.005 | 0.003–0.006 | 0.004–0.007 | 0.005–0.008 | 0.005–0.009 | 0.006–0.009 | 0.007–0.011 | |
| 3 | 130 | 160 | 230 | IPR | 0.001–0.003 | 0.002–0.004 | 0.002–0.006 | 0.003–0.006 | 0.004–0.007 | 0.005–0.008 | 0.006–0.009 | 0.006–0.010 | |
| K | 1 | 300 | 490 | 490 | IPR | 0.004–0.006 | 0.006–0.008 | 0.008–0.012 | 0.009–0.014 | 0.010–0.017 | 0.012–0.018 | 0.014–0.023 | 0.016–0.028 |
| 2 | 260 | 400 | 400 | IPR | 0.004–0.006 | 0.006–0.008 | 0.008–0.012 | 0.009–0.014 | 0.010–0.017 | 0.012–0.018 | 0.014–0.023 | 0.016–0.028 | |
| 3 | 260 | 260 | 460 | IPR | 0.004–0.006 | 0.006–0.008 | 0.009–0.013 | 0.009–0.015 | 0.010–0.018 | 0.011–0.020 | 0.012–0.024 | 0.013–0.028 | |
| Grupo de materiales | | | | ||||||||||
| Velocidad de corte | Sistema métrico | ||||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 0 | 110 | 140 | 170 | mm/r | 0,10–0,14 | 0,12–0,20 | 0,14–0,20 | 0,17–0,25 | 0,25–0,28 | 0,20–0,35 | 0,23–0,43 | 0,28–0,48 |
| 1 | 100 | 140 | 150 | mm/r | 0,12–0,17 | 0,14–0,23 | 0,17–0,23 | 0,20–0,29 | 0,29–0,33 | 0,23–0,41 | 0,27–0,50 | 0,33–0,56 | |
| 2 | 70 | 100 | 110 | mm/r | 0,12–0,17 | 0,12–0,20 | 0,14–0,26 | 0,23–0,32 | 0,24–0,38 | 0,27–0,50 | 0,33–0,63 | 0,39–0,75 | |
| 3 | 70 | 90 | 110 | mm/r | 0,12–0,17 | 0,14–0,23 | 0,17–0,23 | 0,20–0,29 | 0,29–0,33 | 0,23–0,41 | 0,27–0,50 | 0,33–0,56 | |
| 4 | 60 | 70 | 90 | mm/r | 0,09–0,14 | 0,11–0,20 | 0,14–0,20 | 0,17–0,23 | 0,17–0,26 | 0,20–0,33 | 0,23–0,41 | 0,26–0,45 | |
| 5 | 60 | 80 | 90 | mm/r | 0,03–0,11 | 0,04–0,11 | 0,05–0,11 | 0,05–0,14 | 0,08–0,18 | 0,11–0,21 | 0,14–0,24 | 0,16–0,26 | |
| 6 | 80 | 150 | 160 | mm/r | 0,07–0,13 | 0,11–0,11 | 0,12–0,20 | 0,15–0,28 | 0,17–0,33 | 0,19–0,37 | 0,22–0,43 | 0,25–0,48 | |
| M | 1 | 50 | 60 | 80 | mm/r | 0,04–0,08 | 0,06–0,13 | 0,08–0,16 | 0,10–0,18 | 0,12–0,20 | 0,13–0,22 | 0,15–0,24 | 0,18–0,28 |
| 2 | 40 | 50 | 80 | mm/r | 0,04–0,08 | 0,06–0,13 | 0,08–0,16 | 0,10–0,18 | 0,12–0,20 | 0,13–0,22 | 0,15–0,24 | 0,18–0,28 | |
| 3 | 40 | 50 | 70 | mm/r | 0,03–0,07 | 0,05–0,10 | 0,06–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,20 | 0,14–0,22 | 0,16–0,26 | |
| K | 1 | 90 | 150 | 150 | mm/r | 0,10–0,15 | 0,14–0,20 | 0,20–0,30 | 0,22–0,36 | 0,26–0,42 | 0,30–0,45 | 0,36–0,59 | 0,40–0,72 |
| 2 | 80 | 120 | 120 | mm/r | 0,10–0,15 | 0,14–0,20 | 0,20–0,30 | 0,22–0,36 | 0,26–0,42 | 0,30–0,45 | 0,36–0,59 | 0,40–0,72 | |
| 3 | 80 | 80 | 140 | mm/r | 0,11–0,15 | 0,15–0,21 | 0,22–0,32 | 0,22–0,39 | 0,26–0,45 | 0,28–0,50 | 0,30–0,60 | 0,34–0,72 | |
| | | |||||||||||
| Velocidad de corte | Sistema métrico | ||||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Grupo de materiales | Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 0 | 110 | 140 | 170 | mm/r | 0,10–0,14 | 0,12–0,20 | 0,14–0,20 | 0,17–0,25 | 0,25–0,28 | 0,20–0,35 | 0,23–0,43 | 0,28–0,48 |
| 1 | 100 | 140 | 150 | mm/r | 0,12–0,17 | 0,14–0,23 | 0,17–0,23 | 0,20–0,29 | 0,29–0,33 | 0,23–0,41 | 0,27–0,50 | 0,33–0,56 | |
| 2 | 70 | 100 | 110 | mm/r | 0,12–0,17 | 0,12–0,20 | 0,14–0,26 | 0,23–0,32 | 0,24–0,38 | 0,27–0,50 | 0,33–0,63 | 0,39–0,75 | |
| 3 | 70 | 90 | 110 | mm/r | 0,12–0,17 | 0,14–0,23 | 0,17–0,23 | 0,20–0,29 | 0,29–0,33 | 0,23–0,41 | 0,27–0,50 | 0,33–0,56 | |
| 4 | 60 | 70 | 90 | mm/r | 0,09–0,14 | 0,11–0,20 | 0,14–0,20 | 0,17–0,23 | 0,17–0,26 | 0,20–0,33 | 0,23–0,41 | 0,26–0,45 | |
| 5 | 60 | 80 | 100 | mm/r | 0,03–0,11 | 0,04–0,11 | 0,05–0,11 | 0,05–0,14 | 0,08–0,18 | 0,11–0,21 | 0,14–0,24 | 0,16–0,26 | |
| 6 | 60 | 70 | 80 | mm/r | 0,03–0,11 | 0,04–0,11 | 0,05–0,11 | 0,05–0,14 | 0,08–0,18 | 0,11–0,21 | 0,14–0,24 | 0,16–0,26 | |
| M | 1 | 50 | 60 | 80 | mm/r | 0,04–0,08 | 0,06–0,13 | 0,08–0,16 | 0,10–0,18 | 0,12–0,20 | 0,13–0,22 | 0,15–0,24 | 0,18–0,28 |
| 2 | 40 | 50 | 80 | mm/r | 0,04–0,08 | 0,06–0,13 | 0,08–0,16 | 0,10–0,18 | 0,12–0,20 | 0,13–0,22 | 0,15–0,24 | 0,18–0,28 | |
| 3 | 40 | 50 | 70 | mm/r | 0,03–0,07 | 0,05–0,10 | 0,06–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,20 | 0,14–0,22 | 0,16–0,26 | |
| K | 1 | 90 | 150 | 150 | mm/r | 0,10–0,15 | 0,14–0,20 | 0,20–0,30 | 0,22–0,36 | 0,26–0,42 | 0,30–0,45 | 0,36–0,59 | 0,40–0,72 |
| 2 | 80 | 120 | 120 | mm/r | 0,10–0,15 | 0,14–0,20 | 0,20–0,30 | 0,22–0,36 | 0,26–0,42 | 0,30–0,45 | 0,36–0,59 | 0,40–0,72 | |
| 3 | 80 | 80 | 140 | mm/r | 0,11–0,15 | 0,15–0,21 | 0,22–0,32 | 0,22–0,39 | 0,26–0,45 | 0,28–0,50 | 0,30–0,60 | 0,34–0,72 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?