Willkommen
Bestätigen Sie bitte Ihre Präferenzen
Einstellungen aktualisieren

Produktvorschläge

Product Family suggestions

Kennametal steht Ihnen zur Diensten

Kundendienstv

Hier finden Sie die Kontaktdaten von unseren Kundendienstzentren rund um den Globus.

Schnellbestellung
Artikel erfolgreich zum Warenkorb hinzugefügt
Warenkorb anzeigen
Mehr bekommen, weniger zahlen mit unseren zeitlich begrenzten angeboten. Jetzt bestellen

Kennametal steht Ihnen zur Diensten

Kundendienst

Hier finden Sie die Kontaktdaten von unseren Kundendienstzentren rund um den Globus.

Artikel erfolgreich zum Warenkorb hinzugefügt
Warenkorb anzeigen
Exit Search Zurück zur Lösung

Lösung bearbeiten

Lösung hinzufügen

Lösungsname:{{SolutionName}}

    Produkt ähnlich wie:

    Zurück zu | Ändern ähnlich zu

    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric

    Drill Fix™ DFR™ Werkzeugkörper

    Material Nummer100003979

    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    Open expanded view
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    Allgemeine Darstellung
    Kontaktieren Sie unser Verkaufsteam, um alle Ihre Preisoptionen zu erfahren.

    Features and benefits

    • Drill Fix DFR with rectangular-shaped inserts offer highest stability and feed rates at smaller sizes.
    • X-offset design to adjust diameter size on turning machines and optimize tolerances on machining centers.
    • Benefit from the KM-TS™ coupling as most precise and most stable tooling system allowing fully automated tool changing.
    • Drill shipped with insert screws and Torx wrench.
    • BohrenBohren
    • Bohren: Schräge EintrittsflächeBohren: Schräge Eintrittsfläche
    • Bohren: Schräge AustrittsflächeBohren: Schräge Austrittsfläche
    • Bohren: X-VerstellungBohren: X-Verstellung
    • Bohren: Konvexe EintrittsflächeBohren: Konvexe Eintrittsfläche
    • Shank: KM-TS™ ISO 26622Shank: KM-TS™ ISO 26622
    • Innere Kühlmittelzuführung: Radial: Bohren mit WendeschneidplattenInnere Kühlmittelzuführung: Radial: Bohren mit Wendeschneidplatten
    • Bohren: SacklochbohrungBohren: Sacklochbohrung
    • Chain DrillingChain Drilling
    • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
    • Drilling: Half-Cylindrical DrillingDrilling: Half-Cylindrical Drilling
    • Drilling: Corner Drilling 45°Drilling: Corner Drilling 45°

    WARNUNG • Drill Fix DFR

    WARNUNG! Beim Austritt des Bohrers aus dem Werkstück entsteht eine Federscheibe. Bei drehendem Werkstück wird die Scheibe vom Werkstück weggeschleudert! Entsprechende Sicherheitsvorkehrungen sind erforderlich!

    Dimensions • DFR Whistle Notch (WD)-Schaft

    DLS
    2045
    2545
    3258

    Dimensions • DFR Weldon®-Schaft • DIN 1835-1 Form B

    DLS
    2050
    Metrisch
    WerkstoffgruppeSchnitt- bedingungPlattensitzGeometrieSorteSchnittgeschwindigkeit vcEmpfohlene Vorschubrate (fz) pro Durchmesser
    Bereich m/min
    Min.StartwertMax.ØDFR02... 12,50–16,00 mmDFR03... 16,50–20,00 mmDFR04... 20,50–24,00 mm
    P1SOMDKCU25310325360mm/U0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    UOMDKCU40200215230mm/U0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    IOMDKC7140130135150mm/U0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    2SOGDKCPK10310325360mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40200215230mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOMDKC7140130135150mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    3SOGDKCPK10260285320mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40180195220mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC7140110120140mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    4SOGDKCU25220250300mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40150180220mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC714090110140mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    5SOGDKCU25180200220mm/U0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150mm/U0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100mm/U0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    6SOGDKCU25180200220mm/U0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150mm/U0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100mm/U0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    M1SOMDKC7140150190230mm/U0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC7140100130160mm/U0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC71406080100mm/U0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    2SOMDKC7140150180210mm/U0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC7140100130160mm/U0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC71406080100mm/U0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    3SOMDKC7140100130160mm/U0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC714080110140mm/U0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC7140507090mm/U0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    Metrisch
    Schnittgeschwindigkeit vc
    Bereich m/minEmpfohlene Vorschubrate (fz) pro Durchmesser
    WerkstoffgruppeSchnitt– bedingungPlattensitzGeometrieSorteMin.StartwertMax.ØDFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    P1SOMDKCU25310325360mm/r0,09–0,150,11–0,180,15–0,25
    1SIMDKC7140310325360mm/r0,09–0,150,11–0,180,15–0,25
    1UOMDKCU40200215230mm/r0,09–0,150,11–0,180,15–0,25
    1UIMDKC7140200215230mm/r0,09–0,150,11–0,180,15–0,25
    1IOMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    1IIMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    2SOGDKCPK10310325360mm/r0,09–0,150,11–0,180,15–0,25
    2SILDKC7140310325360mm/r0,09–0,150,11–0,180,15–0,25
    2UOGDKCU40200215230mm/r0,09–0,150,11–0,180,15–0,25
    2UILDKC7140200215230mm/r0,09–0,150,11–0,180,15–0,25
    2IOMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    2IILDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    3SOGDKCPK10260285320mm/r0,09–0,150,11–0,180,15–0,25
    3SILDKC7140260285320mm/r0,09–0,150,11–0,180,15–0,25
    3UOGDKCU40180195220mm/r0,09–0,150,11–0,180,15–0,25
    3UILDKC7140180195220mm/r0,09–0,150,11–0,180,15–0,25
    3IOGDKC7140110120140mm/r0,09–0,150,11–0,180,15–0,25
    3IILDKC7140110120140mm/r0,09–0,150,11–0,180,15–0,25
    4SOGDKCU25220250300mm/r0,09–0,150,11–0,180,15–0,25
    4SILDKC7140220250300mm/r0,09–0,150,11–0,180,15–0,25
    4UOGDKCU40150180220mm/r0,09–0,150,11–0,180,15–0,25
    4UILDKC7140150180220mm/r0,09–0,150,11–0,180,15–0,25
    4IOGDKC714090110140mm/r0,09–0,150,11–0,180,15–0,25
    4IILDKC714090110140mm/r0,09–0,150,11–0,180,15–0,25
    5SOGDKCU25180200220mm/r0,07–0,130,09–0,150,11–0,18
    5SILDKC7140180200220mm/r0,07–0,130,09–0,150,11–0,18
    5UOGDKCU40120135150mm/r0,07–0,130,09–0,150,11–0,18
    5UILDKC7140120135150mm/r0,07–0,130,09–0,150,11–0,18
    5IOGDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    5IILDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    6SOGDKCU25180200220mm/r0,07–0,130,09–0,150,11–0,18
    6SILDKC7140180200220mm/r0,07–0,130,09–0,150,11–0,18
    6UOGDKCU40120135150mm/r0,07–0,130,09–0,150,11–0,18
    6UILDKC7140120135150mm/r0,07–0,130,09–0,150,11–0,18
    6IOGDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    6IILDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    Metrisch
    WerkstoffgruppeSchnitt- bedingungPlattensitzGeometrieSorteSchnittgeschwindigkeit vcEmpfohlene Vorschubrate (fz) pro Durchmesser
    Bereich m/min
    Min.StartwertMax.ØDFR02... 12,50–16,00 mmDFR03... 16,50–20,00 mmDFR04... 20,50–24,00 mm
    P1SOMDKCU25310325360mm/U0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    UOMDKCU40200215230mm/U0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    IOMDKC7140130135150mm/U0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    2SOGDKCPK10310325360mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40200215230mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOMDKC7140130135150mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    3SOGDKCPK10260285320mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40180195220mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC7140110120140mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    4SOGDKCU25220250300mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40150180220mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC714090110140mm/U0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    5SOGDKCU25180200220mm/U0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150mm/U0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100mm/U0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    6SOGDKCU25180200220mm/U0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150mm/U0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100mm/U0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    M1SOMDKC7140150190230mm/U0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    UOMDKC7140100130160mm/U0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC71406080100mm/U0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    2SOMDKC7140150180210mm/U0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC7140100130160mm/U0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    IOMDKC71406080100mm/U0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    3SOMDKC7140100130160mm/U0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    UOMDKC714080110140mm/U0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC7140507090mm/U0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    Metrisch
    Schnittgeschwindigkeit vc
    Bereich m/minEmpfohlene Vorschubrate (fz) pro Durchmesser
    WerkstoffgruppeSchnitt– bedingungPlattensitzGeometrieSorteMin.StartwertMax. Ø DFR02... 12,50–16,00DFR03... 16,50–20,00DFR04... 20,50–24,00
    M1SOMDKC7140150190230mm/r0,07–0,130,08–0,160,10–0,18
    1SIMDKC7140150190230mm/r0,07–0,130,08–0,160,10–0,18
    1UOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    1UIMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    1IOMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    1IIMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    2SOMDKC7140150180210mm/r0,07–0,130,08–0,160,10–0,18
    2SIMDKC7140150180210mm/r0,07–0,130,08–0,160,10–0,18
    2UOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    2UIMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    2IOMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    2IIMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    3SOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    3SIMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    3UOMDKC714080110140mm/r0,07–0,130,08–0,160,10–0,18
    3UIMDKC714080110140mm/r0,07–0,130,08–0,160,10–0,18
    3IOMDKC7140507090mm/r0,07–0,130,08–0,160,10–0,18
    3IIMDKC7140507090mm/r0,07–0,130,08–0,160,10–0,18
    Metrisch
    WerkstoffgruppeSchnitt- bedingungPlattensitzGeometrieSorteSchnittgeschwindigkeit vcEmpfohlene Vorschubrate (fz) pro Durchmesser
    Bereich m/min
    Min.StartwertMax.ØDFR02... 12,50–16,00 mmDFR03... 16,50–20,00 mmDFR04... 20,50–24,00 mm
    K1SOGDKCPK10200240300mm/U0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25120155200mm/U0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100125mm/U0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    2SOGDKCPK10180220260mm/U0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170mm/U0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120mm/U0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    3SOGDKCPK10180220260mm/U0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170mm/U0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120mm/U0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    N1SOSTKD1425400600800mm/U0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40300400500mm/U0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/U0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    2SOSTKD1425375550775mm/U0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/U0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40175250325mm/U0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    3SOSTKD1425350500650mm/U0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/U0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40150250350mm/U0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    4SOSTKD1425400600800mm/U0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/U0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/U0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    5SOSTKD1425400600800mm/U0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/U0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/U0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    6SOSTKD1425400600800mm/U0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOGDKCU40250350450mm/U0,07–0,090,10–0,140,12–0,16
    IGDKCU40
    IOGDKMF200300400mm/U0,07–0,090,10–0,140,12–0,16
    IGDKMF
    Metrisch
    Schnittgeschwindigkeit vc
    Bereich m/minEmpfohlene Vorschubrate (fz) pro Durchmesser
    WerkstoffgruppeSchnitt– bedingungPlattensitzGeometrieSorteMin.StartwertMax. Ø DFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    K1SOGDKCPK10200240300mm/tr0,10–0,180,12–0,200,14–0,24
    1SILDKCU40200240300mm/tr0,10–0,180,12–0,200,14–0,24
    1UOGDKCU25120155200mm/tr0,10–0,180,12–0,200,14–0,24
    1UILDKC7140120155200mm/tr0,10–0,180,12–0,200,14–0,24
    1IOGDKCU4080100125mm/tr0,10–0,180,12–0,200,14–0,24
    1IILDKC714080100125mm/tr0,10–0,180,12–0,200,14–0,24
    2SOGDKCPK10180220260mm/tr0,10–0,180,12–0,200,14–0,24
    2SILDKCU40180220260mm/tr0,10–0,180,12–0,200,14–0,24
    2UOGDKCU25110140170mm/tr0,10–0,180,12–0,200,14–0,24
    2UILDKC7140110140170mm/tr0,10–0,180,12–0,200,14–0,24
    2IOGDKCU4080100120mm/tr0,10–0,180,12–0,200,14–0,24
    2IILDKC714080100120mm/tr0,10–0,180,12–0,200,14–0,24
    3SOGDKCPK10180220260mm/tr0,10–0,180,12–0,200,14–0,24
    3SILDKCU40180220260mm/tr0,10–0,180,12–0,200,14–0,24
    3UOGDKCU25110140170mm/tr0,10–0,180,12–0,200,14–0,24
    3UILDKC7140110140170mm/tr0,10–0,180,12–0,200,14–0,24
    3IOGDKCU4080100120mm/tr0,10–0,180,12–0,200,14–0,24
    3IILDKC714080100120mm/tr0,10–0,180,12–0,200,14–0,24
    Metrisch
    WerkstoffgruppeSchnitt- bedingungPlattensitzGeometrieSorteSchnittgeschwindigkeit vcEmpfohlene Vorschubrate (fz) pro Durchmesser
    Bereich m/min
    Min.StartwertMax.ØDFR02... 12,50–16,00 mmDFR03... 16,50–20,00 mmDFR04... 20,50–24,00 mm
    K1SOGDKCPK10200240300mm/U0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25120155200mm/U0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100125mm/U0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    2SOGDKCPK10180220260mm/U0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170mm/U0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120mm/U0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    3SOGDKCPK10180220260mm/U0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170mm/U0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120mm/U0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    N1SOSTKD1425400600800mm/U0,07-0,090,10-0,140,12-0,16
    ISTKD1425
    UOLDKCU40300400500mm/U0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/U0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    2SOSTKD1425375550775mm/U0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/U0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    IOLDKCU40175250325mm/U0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    3SOSTKD1425350500650mm/U0,07-0,090,10-0,140,12-0,16
    ISTKD1425
    UOLDKCU40250350450mm/U0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40150250350mm/U0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    4SOSTKD1425400600800mm/U0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/U0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    IOLDKCU40200300400mm/U0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    6SOSTKD1425400600800mm/U0,07-0,090,10-0,140,12-0,16
    ISTKD1425
    UOHPKCU40250350450mm/U0,07–0,090,10–0,140,12–0,16
    IHPKCU40
    IOHPKMF200300400mm/U0,07-0,090,10-0,140,12-0,16
    IHPKMF
    Metrisch
    Schnittgeschwindigkeit vc
    Bereich m/minEmpfohlene Vorschubrate (fz) pro Durchmesser
    WerkstoffgruppeSchnitt– bedingungPlattensitzGeometrieSorteMin.StartwertMax. Ø DFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    N1SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    1SISTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    1UOLDKCU40300400500mm/r0,07–0,090,10–0,140,12–0,16
    1UILDKCU40300400500mm/r0,07–0,090,10–0,140,12–0,16
    1IOLDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    1IILDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    2SOSTKD1425375550775mm/r0,07–0,090,10–0,140,12–0,16
    2SISTKD1425375550775mm/r0,07–0,090,10–0,140,12–0,16
    2UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    2UILDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    2IOLDKCU40175250325mm/r0,07–0,090,10–0,140,12–0,16
    2IILDKCU40175250325mm/r0,07–0,090,10–0,140,12–0,16
    3SOSTKD1425350500650mm/r0,07–0,090,10–0,140,12–0,16
    3SISTKD1425350500650mm/r0,07–0,090,10–0,140,12–0,16
    3UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    3UILDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    3IOLDKCU40150250350mm/r0,07–0,090,10–0,140,12–0,16
    3IILDKCU40150250350mm/r0,07–0,090,10–0,140,12–0,16
    4SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    4SISTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    4UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    4UILDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    4IOLDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    4IILDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    6SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    6SISTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    6UOHPKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    6UIHPKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    6IOHPKMF200300400mm/r0,07–0,090,10–0,140,12–0,16
    6IIHPKMF200300400mm/r0,07–0,090,10–0,140,12–0,16
    Metrisch
    WerkstoffgruppeSchnitt- bedingungPlattensitzGeometrieSorteSchnittgeschwindigkeit vcEmpfohlene Vorschubrate (fz) pro Durchmesser
    Bereich m/min
    Min.StartwertMax.ØDFR02... 12,50 16,00 mmDFR03... 16,50 20,00 mmDFR04... 20,50 24,00 mm
    S1SOGDKCU40607075mm/U0,04–0,060,05–0,080,06–0,10
    ILDKCU40
    UOGDKCU40405060mm/U0,04–0,060,05–0,080,06–0,10
    ILDKC7140
    IOMDKC7140253040mm/U0,04–0,060,05–0,080,06–0,10
    IMDKC7140
    2SOGDKCU40506070mm/U0,04–0,060,05–0,080,06–0,10
    ILDKCU40
    UOGDKCU40304050mm/U0,04–0,060,05–0,080,06–0,10
    ILDKC7140
    IOMDKC7140253040mm/U0,04–0,060,05–0,080,06–0,10
    IMDKC7140
    3SOGDKCU40708090mm/U0,05–0,080,06–0,100,06–0,10
    ILDKCU40
    UOGDKCU40506070mm/U0,05–0,080,06–0,100,06–0,10
    ILDKC7140
    IOMDKC7140304050mm/U0,05–0,080,06–0,100,06–0,10
    IMDKC7140
    4SOGDKCU40708090mm/U0,05–0,080,06–0,100,06–0,10
    ILDKCU40
    UOGDKCU40506070mm/U0,05–0,080,06–0,100,06–0,10
    ILDKC7140
    IOMDKC7140304050mm/U0,05–0,080,06–0,100,06–0,10
    IMDKC7140
    Metrisch
    Schnittgeschwindigkeit vc
    Bereich m/minEmpfohlene Vorschubrate (fz) pro Durchmesser
    WerkstoffgruppeSchnitt- bedingungPlattensitzGeometrieSorteMin.StartwertMax. Ø DFR02... 12,50-16,00 mmDFR03... 16,50-20,00 mmDFR04... 20,50-24,00 mm
    S1SOGDKCU40607075mm/r0,04–0,060,05–0,080,06–0,10
    1SILDKCU40607075mm/r0,04–0,060,05–0,080,06–0,10
    1UOGDKCU40405060mm/r0,04–0,060,05–0,080,06–0,10
    1UILDKC7140405060mm/r0,04–0,060,05–0,080,06–0,10
    1IOMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    1IIMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    2SOGDKCU40506070mm/r0,04–0,060,05–0,080,06–0,10
    2SILDKCU40506070mm/r0,04–0,060,05–0,080,06–0,10
    2UOGDKCU40304050mm/r0,04–0,060,05–0,080,06–0,10
    2UILDKC7140304050mm/r0,04–0,060,05–0,080,06–0,10
    2IOMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    2IIMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    3SOGDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    3SILDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    3UOGDKCU40506070mm/r0,05–0,080,06–0,100,06–0,10
    3UILDKC7140506070mm/r0,05–0,080,06–0,100,06–0,10
    3IOMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10
    3IIMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10
    4SOGDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    4SILDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    4UOGDKCU40506070mm/r0,05–0,080,06–0,100,06–0,10
    4UILDKC7140506070mm/r0,05–0,080,06–0,100,06–0,10
    4IOMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10
    4IIMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10

    DFR™ • PKD • Metrisch

    Metrisch
    WerkstoffgruppeSchnitt- bedingungPlattensitzGeometrieSorteSchnittgeschwindigkeit vcEmpfohlene Vorschubrate (fz) pro Durchmesser
    Bereich m/min
    Min.StartwertMax.ØDFR04 20,50–24,00 mm
    N1SOSTKD1425396720841mm/U0,06–0,08
    ISTKD1425
    2SOSTKD1425369670782mm/U0,12–0,18
    ISTKD1425
    3SOSTKD1425341619723mm/U0,12–0,18
    ISTKD1425
    4SOSTKD1425475720841mm/U0,12–0,18
    ISTKD1425
    5SOSTKD1425480720864mm/U0,06–0,08
    ISTKD1425
    Zoll
    WerkstoffgruppeSchnitt- bedingungPlattensitzGeometrieSorteSchnittgeschwindigkeit vcEmpfohlene Vorschubrate (fz) pro Durchmesser
    Bereich SFM
    Min.StartwertMax.ØDFR04 .813"–1.00"
    N1SOSTKD1425130023622760IPR.002–.003
    ISTKD1425
    2SOSTKD1425120921972567IPR.005–.007
    ISTKD1425
    3SOSTKD1425111820322374IPR.005–.007
    ISTKD1425
    4SOSTKD1425156023622760IPR.005–.007
    ISTKD1425
    5SOSTKD1425157523622834IPR.002–.003
    ISTKD1425
    Metrisch
    Schnittgeschwindigkeit vc
    Bereich m/minEmpfohlene Vorschubrate (fz) pro Durchmesser
    WerkstoffgruppeSchnitt– bedingungPlattensitzGeometrieSorteMin.StartwertMax.ØDFR04 20,50–24,00 mm
    N1SOSTKD1425396720841mm/r0,06–0,08
    1SISTKD1425396720841mm/r0,06–0,08
    2SOSTKD1425369670782mm/r0,12–0,18
    2SISTKD1425369670782mm/r0,12–0,18
    3SOSTKD1425341619723mm/r0,12–0,18
    3SISTKD1425341619723mm/r0,12–0,18
    4SOSTKD1425475720841mm/r0,12–0,18
    4SISTKD1425475720841mm/r0,12–0,18
    5SOSTKD1425480720864mm/r0,06–0,08
    5SISTKD1425480720864mm/r0,06–0,08
    Sie sind im Begriff, zu Ihrer MySolutions-Seite hinzuzufügen.. Möchten Sie fortfahren?
    Select the destination where you want to move bis.
    Neu Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Geben Sie einen gültigen Namen ein.
    product-image
    Please adjust the following properties from

    ISO Katalog

    ANSI Katalog

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Sie sollten angemeldet sein, um Ihre Dashboard-Informationen zu sehen
    Session expired due to inactivity, please login again
    Das/die Produkt/e (), das/die Sie dem Warenkorb hinzufügen wollten, ist/sind nicht verfügbar. Bitte wenden Sie sich an den Kundendienst.
    Artikel erfolgreich zum Warenkorb hinzugefügt
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Katalog Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk