KOR6<sup>DT</sup> • 6 Schneiden • 5 x D • SAFE-λOCK® Schaft • Zoll
Produkt ähnlich wie:
KOR6DT • 6 Schneiden • 5 x D • SAFE-λOCK® Schaft • Zoll
KOR6™ DT • 6 Schneiden • 5 x D • SAFE-λOCK® Schaft
Material Nummer100159670
Kontaktieren Sie unser Verkaufsteam, um alle Ihre Preisoptionen zu erfahren.
Features and benefits
- Designed for trochoidal milling with low radial engagement and full length of cut.
- With chip splitters for ideal chip evacuation.
- Proprietary flute form reduces vibrations and improves tool life.
- Helix angle tailored to minimize vibration and optimize tool life.
- Front end geometry designed for maximum tool life in helical and ramping operations.
- Safe-Lock for pull out protection.
- Centre cutting for plunging and ramping operations.
Trochoidal Milling
Schräg-Eintauchfräsen Ins Volle
Umfangfräsen/Schulterfräsen: Ebene Stirnfläche
Werkzeugabmessungen: Schneidreihen: 6
Spiralwinkel: 38°
Schneideckenausführung: Eckenradius
SAFE-LOCK Shank
KOR6™ DT • 6 Flutes • 5 x D • Adjustment factor table for feed calculation • Inch
| Ae/D1 | 0.50% | 1.00% | 1.50% | 2.00% | 4.00% | 5.00% | |
| Speed factor | Kv | 2.00 | 1.97 | 1.93 | 1.38 | 1.03 | 1.00 |
| Feed factor | KFz | 1.27 | 1.18 | 1.14 | 1.09 | 1.05 | 1.00 |
KOR6™ DT • 6 Flutes • 5 x D • Application Data
| Werkstoffgruppe |  |  | ||||||||||
| Schulterfräsen (A) | Recommended feed per tooth (IPT = inch/th) for side milling (A). | |||||||||||
| A | KCSM15 | D1 | ||||||||||
| Schnittgeschwindigkeit | frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | ||||||
| ap | ae | Min. | Max. | dec. | .3750 | .5000 | .6250 | .7500 | 1.0000 | |||
| P | 0 | 5 x D | 0.05 x D | 500 | – | 1770 | IPT | .0029 | .0037 | .0044 | .0054 | .0078 |
| 1 | 5 x D | 0.05 x D | 500 | – | 1770 | IPT | .0029 | .0037 | .0044 | .0054 | .0078 | |
| 2 | 5 x D | 0.05 x D | 460 | – | 1680 | IPT | .0029 | .0037 | .0044 | .0054 | .0078 | |
| 3 | 5 x D | 0.05 x D | 400 | – | 1420 | IPT | .0024 | .0031 | .0037 | .0046 | .0072 | |
| 4 | 5 x D | 0.05 x D | 300 | – | 1330 | IPT | .0022 | .0028 | .0033 | .0041 | .0062 | |
| 5 | 5 x D | 0.05 x D | 200 | – | 890 | IPT | .0020 | .0025 | .0029 | .0037 | .0058 | |
| 6 | 5 x D | 0.05 x D | 170 | – | 660 | IPT | .0017 | .0021 | .0024 | .0031 | .0045 | |
| M | 1 | 5 x D | 0.05 x D | 300 | – | 1020 | IPT | .0024 | .0031 | .0037 | .0046 | .0072 |
| 2 | 5 x D | 0.05 x D | 200 | – | 710 | IPT | .0020 | .0025 | .0029 | .0037 | .0058 | |
| 3 | 5 x D | 0.05 x D | 200 | – | 620 | IPT | .0017 | .0021 | .0024 | .0031 | .0045 | |
| K | 1 | 5 x D | 0.05 x D | 400 | – | 1330 | IPT | .0029 | .0037 | .0044 | .0054 | .0078 |
| 2 | 5 x D | 0.05 x D | 370 | – | 1240 | IPT | .0024 | .0031 | .0037 | .0046 | .0072 | |
| 3 | 5 x D | 0.05 x D | 370 | – | 1150 | IPT | .0020 | .0025 | .0029 | .0037 | .0058 | |
| S | 1 | 5 x D | 0.05 x D | 170 | – | 800 | IPT | .0024 | .0031 | .0037 | .0046 | .0072 |
| 2 | 5 x D | 0.05 x D | 80 | – | 710 | IPT | .0020 | .0025 | .0029 | .0037 | .0058 | |
| 3 | 5 x D | 0.05 x D | 80 | – | 350 | IPT | .0013 | .0016 | .0019 | .0025 | .0039 | |
| 4 | 5 x D | 0.05 x D | 170 | – | 530 | IPT | .0017 | .0023 | .0027 | .0034 | .0053 | |
| H | 1 | 5 x D | 0.05 x D | 270 | – | 1240 | IPT | .0022 | .0028 | .0033 | .0041 | .0062 |
| 2 | 5 x D | 0.05 x D | 230 | – | 1060 | IPT | .0017 | .0021 | .0024 | .0031 | .0045 | |