Bohren
Bohren: Schräge Eintrittsfläche
Bohren: Schräge Austrittsfläche
Bohren: Flachbohren
Bohren: Konvexe Eintrittsfläche
Werkzeugabmessungen: 2 Schneidreihen/4 Führungsfasen/innere Kühlmittelzuführung
DIN 6535
DIN 6537
Drilling - Through Coolant
Innere Kühlmittelzuführung: MQL (Minimalmengenschmierung): Bohren
Zylinderschaft – ohne Spannfläche ≤h6
Spiralwinkel: 30°
Schneideckenausführung: Eckenfase
Schneideckenausführung: Ebene Stirnfläche
Bohrtiefe: 3x
Senken
Drilling: Cross-Hole DrillingDownloaded file will be available after import in the {{cadTool}} tool library.
| Material Nummer | 3885856 |
| ISO Katalog Nummer | B707A13500FBL |
| ANSI Katalog Nummer | B707A13500FBL |
| Sorte | KCMS15 |
| [D1] Bohrerdurchmesser M | 13.5 mm |
| [D1] Bohrerdurchmesser M | .5315 in |
| [L] Gesamtlänge | 107 mm |
| [L] Gesamtlänge | 4.212 in |
| [L3] Spannuten-Länge | 60 mm |
| [L3] Spannuten-Länge | 2.362 in |
| [L4] Maximale Bohrtiefe | 43 mm |
| [L4] Maximale Bohrtiefe | 1.692 in |
| [L5] Bohrerspitzenlänge | 0.44 mm |
| [L5] Bohrerspitzenlänge | .0173 in |
| [LS] Schaftlänge | 45 mm |
| [LS] Schaftlänge | 1.771 in |
| [D] Adapter/Schaft/Bohrungsdurchmesser | 14 mm |
| [D] Adapter/Schaft/Bohrungsdurchmesser | .5512 in |
BohrenBohren: Schräge EintrittsflächeBohren: Schräge AustrittsflächeBohren: FlachbohrenBohren: Konvexe EintrittsflächeWerkzeugabmessungen: 2 Schneidreihen/4 Führungsfasen/innere KühlmittelzuführungDIN 6535DIN 6537Drilling - Through CoolantInnere Kühlmittelzuführung: MQL (Minimalmengenschmierung): BohrenZylinderschaft – ohne Spannfläche ≤h6Spiralwinkel: 30°Schneideckenausführung: EckenfaseSchneideckenausführung: Ebene StirnflächeBohrtiefe: 3xSenkenDrilling: Cross-Hole DrillingLösung erstellen, um Vorschübe und Geschwindigkeiten zu berechnen
Nachdem Sie eine Lösung erstellt haben, wählen Sie einfach das Symbol für Vorschübe und Geschwindigkeiten und unser System gibt Ihnen Empfehlungen. Sie können die Informationen anpassen, indem Sie Ihre Maschine und Spezifikationen hinzufügen oder Anpassungen mithilfe der Schieberegler vornehmen.
| Tolerance • Inch | ||
| nominal size range | D1 tolerance m7 | D tolerance h6 |
| .0002/.0006 | .0000/-.0003 | |
| .0002/.0008 | .0000/-.0004 | |
| .0003/.0010 | .0000/-.0004 | |
| .0003/.0011 | .0000/-.0005 | |
| Tolerance • Metric | ||
| nominal size range | D1 tolerance m7 | D tolerance h6 |
| 0,004/0,016 | 0,000/-0,008 | |
| 0,006/0,021 | 0,000/-0,009 | |
| 0,007/0,025 | 0,000/-0,011 | |
| 0,008/0,029 | 0,000/-0,013 | |
| short | long | extra long | |||||||||
| Ø | DIN 6535 | ~3 x D | ~5 x D | ~8 x D | |||||||
| D1 | D | LS min | L | L3 | L4 | L | L3 | L4 | L | L3 | L4 |
| -1.40 | 4 | 28 | 58 | 7 | 5 | 58 | 9 | 6 | 58 | 12 | 10 |
| -1.90 | 4 | 28 | 58 | 9 | 6 | 58 | 12 | 9 | 58 | 18 | 15 |
| -2.30 | 4 | 28 | 58 | 13 | 9 | 58 | 18 | 14 | 66 | 26 | 22 |
| -2.99 | 4 | 28 | 58 | 17 | 12 | 58 | 22 | 17 | 66 | 30 | 25 |
| -3.75 | 6 | 36 | 62 | 20 | 14 | 66 | 28 | 23 | 78 | 40 | 33 |
| -4.75 | 6 | 36 | 66 | 24 | 17 | 74 | 36 | 29 | 87 | 49 | 41 |
| -6.00 | 6 | 36 | 66 | 28 | 20 | 82 | 44 | 35 | 94 | 56 | 48 |
| -7.00 | 8 | 36 | 79 | 34 | 24 | 91 | 53 | 43 | 105 | 67 | 57 |
| -8.00 | 8 | 36 | 79 | 41 | 29 | 91 | 53 | 43 | 110 | 72 | 61 |
| -10.00 | 10 | 40 | 89 | 47 | 35 | 103 | 61 | 49 | 122 | 80 | 68 |
| -12.00 | 12 | 45 | 102 | 55 | 40 | 118 | 71 | 56 | 141 | 94 | 79 |
| -14.00 | 14 | 45 | 107 | 60 | 43 | 124 | 77 | 60 | 155 | 108 | 91 |
| -16.00 | 16 | 48 | 115 | 65 | 45 | 133 | 83 | 63 | 171 | 121 | 101 |
| -18.00 | 18 | 48 | 123 | 73 | 51 | 143 | 93 | 71 | 185 | 135 | 113 |
| -20.00 | 20 | 50 | 131 | 79 | 55 | 153 | 101 | 77 | 200 | 148 | 124 |
| -22.00 | 20 | 50 | 141 | 86 | 60 | 167 | 112 | 85 | 217 | 162 | 136 |
| -25.00 | 25 | 56 | 153 | 95 | 65 | 184 | 126 | 98 | 238 | 180 | 150 |
| Material |  |  | |||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 5 | 45 | 50 | 60 | mm/r | 0,04–0,08 | 0,05–0,09 | 0,06–0,12 | 0,09–0,15 | 0,10–0,16 | 0,12–0,20 | 0,14–0,23 | 0,16–0,24 |
| 6 | 40 | 50 | 60 | mm/r | 0,03–0,06 | 0,04–0,07 | 0,04–0,10 | 0,08–0,12 | 0,09–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | |
| M | 1 | 40 | 50 | 60 | mm/r | 0,04–0,08 | 0,05–0,09 | 0,06–0,12 | 0,09–0,15 | 0,10–0,16 | 0,12–0,20 | 0,14–0,23 | 0,16–0,24 |
| 2 | 40 | 50 | 80 | mm/r | 0,06–0,11 | 0,07–0,11 | 0,08–0,16 | 0,12–0,20 | 0,13–0,21 | 0,16–0,22 | 0,18–0,24 | 0,21–0,26 | |
| 3 | 40 | 55 | 70 | mm/r | 0,03–0,04 | 0,03–0,05 | 0,04–0,06 | 0,04–0,07 | 0,05–0,08 | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | |
| S | 1 | 20 | 25 | 30 | mm/r | 0,06–0,08 | 0,06–0,08 | 0,07–0,10 | 0,10–0,13 | 0,10–0,14 | 0,12–0,16 | 0,14–0,19 | 0,17–0,22 |
| 2 | 10 | 20 | 30 | mm/r | 0,05–0,07 | 0,05–0,07 | 0,06–0,08 | 0,08–0,11 | 0,09–0,12 | 0,10–0,13 | 0,12–0,16 | 0,14–0,18 | |
| 3 | 30 | 35 | 50 | mm/r | 0,03–0,05 | 0,03–0,05 | 0,04–0,08 | 0,05–0,10 | 0,05–0,10 | 0,05–0,10 | 0,07–0,11 | 0,08–0,12 | |
| 4 | 30 | 35 | 50 | mm/r | 0,03–0,05 | 0,03–0,05 | 0,04–0,08 | 0,05–0,10 | 0,05–0,10 | 0,05–0,10 | 0,07–0,11 | 0,08–0,12 | |
| Material | | | |||||||||||
| Material | Cutting Speed | Inch | |||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Min | Starting Value | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| P | 5 | 150 | 160 | 200 | IPR | .002–.003 | .002–.004 | .002–.005 | .004–.006 | .004–.006 | .005–.008 | .006–.009 | .006–.009 |
| 6 | 130 | 160 | 200 | IPR | .001–.002 | .002–.003 | .002–.004 | .003–.005 | .004–.006 | .004–.006 | .005–.007 | .006–.008 | |
| M | 1 | 130 | 160 | 200 | IPR | .002–.003 | .002–.004 | .002–.005 | .004–.006 | .004–.006 | .005–.008 | .006–.009 | .006–.009 |
| 2 | 130 | 160 | 260 | IPR | .002–.004 | .003–.004 | .003–.006 | .005–.008 | .005–.008 | .006–.009 | .007–.009 | .008–.010 | |
| 3 | 130 | 180 | 230 | IPR | .001–.002 | .001–.002 | .002–.002 | .002–.003 | .002–.003 | .002–.004 | .003–.004 | .003–.005 | |
| S | 1 | 70 | 80 | 100 | IPR | .002–.003 | .002–.003 | .003–.004 | .004–.005 | .004–.006 | .005–.006 | .006–.008 | .007–.009 |
| 2 | 30 | 70 | 100 | IPR | .002–.003 | .002–.003 | .002–.003 | .003–.004 | .004–.005 | .004–.005 | .005–.006 | .006–.007 | |
| 3 | 100 | 110 | 160 | IPR | .001–.002 | .001–.002 | .002–.003 | .002–.004 | .002–.004 | .002–.004 | .003–.004 | .003–.005 | |
| 4 | 100 | 110 | 160 | IPR | .001–.002 | .001–.002 | .002–.003 | .002–.004 | .002–.004 | .002–.004 | .003–.004 | .003–.005 | |
| | ||||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Material | Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 5 | 45 | 50 | 60 | mm/r | 0,04–0,08 | 0,05–0,09 | 0,06–0,12 | 0,09–0,15 | 0,10–0,16 | 0,12–0,20 | 0,14–0,23 | 0,16–0,24 |
| 6 | 40 | 50 | 60 | mm/r | 0,03–0,06 | 0,04–0,07 | 0,04–0,10 | 0,08–0,12 | 0,09–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | |
| M | 1 | 40 | 50 | 60 | mm/r | 0,04–0,08 | 0,05–0,09 | 0,06–0,12 | 0,09–0,15 | 0,10–0,16 | 0,12–0,20 | 0,14–0,23 | 0,16–0,24 |
| 2 | 40 | 50 | 80 | mm/r | 0,06–0,11 | 0,07–0,11 | 0,08–0,16 | 0,12–0,20 | 0,13–0,21 | 0,16–0,22 | 0,18–0,24 | 0,21–0,26 | |
| 3 | 40 | 55 | 70 | mm/r | 0,03–0,04 | 0,03–0,05 | 0,04–0,06 | 0,04–0,07 | 0,05–0,08 | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | |
| S | 1 | 20 | 25 | 30 | mm/r | 0,06–0,08 | 0,06–0,08 | 0,07–0,10 | 0,10–0,13 | 0,10–0,14 | 0,12–0,16 | 0,14–0,19 | 0,17–0,22 |
| 2 | 10 | 20 | 30 | mm/r | 0,05–0,07 | 0,05–0,07 | 0,06–0,08 | 0,08–0,11 | 0,09–0,12 | 0,10–0,13 | 0,12–0,16 | 0,14–0,18 | |
| 3 | 30 | 35 | 50 | mm/r | 0,03–0,05 | 0,03–0,05 | 0,04–0,08 | 0,05–0,10 | 0,05–0,10 | 0,05–0,10 | 0,07–0,11 | 0,08–0,12 | |
| 4 | 30 | 35 | 50 | mm/r | 0,03–0,05 | 0,03–0,05 | 0,04–0,08 | 0,05–0,10 | 0,05–0,10 | 0,05–0,10 | 0,07–0,11 | 0,08–0,12 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO Katalog
ANSI Katalog
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Katalog | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?