Produkt ähnlich wie:
KVNS™ A2™ • Drive Ring • Inch
Two drive rings per cutter required.
Material Nummer1247660
ISO Katalog NummerKAP1871004ANSI Katalog NummerKAP1871004
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Material Nummer | 1247660 |
ISO Katalog Nummer | KAP1871004 |
ANSI Katalog Nummer | KAP1871004 |
Gewicht Kilogramm | 0.09 |
Lösung erstellen, um Vorschübe und Geschwindigkeiten zu berechnen
Nachdem Sie eine Lösung erstellt haben, wählen Sie einfach das Symbol für Vorschübe und Geschwindigkeiten und unser System gibt Ihnen Empfehlungen. Sie können die Informationen anpassen, indem Sie Ihre Maschine und Spezifikationen hinzufügen oder Anpassungen mithilfe der Schieberegler vornehmen.
Insert Selection
Auswahlhilfe für Schneidkörper
KVNS™ A2™ Slotting Cutters • Insert Selection Guide | ||||||
Material Group | Light | General | Heavy | |||
– | (Light geometry) | (Strong geometry) | ||||
– | wear | toughness | ||||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1-P2 | .S..GD | KCPK30 | .S..GD | KCPK30 | .S..GB | KCPK30 |
P3-P4 | .S..GD | KCPK30 | .S..GD | KCPK30 | .S..GB | KCPK30 |
P5-P6 | .S..GD | KCPK30 | .S..GB | KCPK30 | .S..GB | KCPK30 |
M1-M2 | .S..GD | KCPK30 | .S..GD | KCPK30 | .S..GB | KCPK30 |
M3 | .S..GD | KCPK30 | .S..GB | KCPK30 | .S..GB | KCPK30 |
K1-K2 | .S..GD | KCPK30 | .S..GD | KCPK30 | .S..GB | KCPK30 |
K3 | .S..GD | KCPK30 | .S..GD | KCPK30 | .S..GB | KCPK30 |
N1-N2 | – | – | – | – | – | – |
N3 | – | – | – | – | – | – |
S1-S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | – | – | – | – | – | – |
H1 | – | – | – | – | – | – |
Feeds
Empfohlene Startwerte für Vorschübe [mm]
KVNS™ A2™ Series • Recommended Starting Feeds [mm/th] | |||||||||||||||
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | |||||||||||
L | M | H | L | M | H | L | M | H | L | M | H | L | M | H | |
.S..GD | 0,23 | 0,46 | 0,71 | 0,17 | 0,33 | 0,51 | 0,13 | 0,25 | 0,38 | 0,11 | 0,22 | 0,33 | 0,10 | 0,20 | 0,30 |
.S..GB | 0,23 | 0,46 | 0,74 | 0,17 | 0,33 | 0,54 | 0,13 | 0,25 | 0,40 | 0,11 | 0,22 | 0,35 | 0,10 | 0,20 | 0,32 |
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate. |
Recommended Starting Feeds [IPT]
KVNS™ A2™ Series • Recommended Starting Feeds [IPT] | |||||||||||||||
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | |||||||||||
L | M | H | L | M | H | L | M | H | L | M | H | L | M | H | |
.S..GD | 0.009 | 0.017 | 0.026 | 0.007 | 0.013 | 0.019 | 0.005 | 0.009 | 0.014 | 0.004 | 0.008 | 0.012 | 0.004 | 0.008 | 0.011 |
.S..GB | 0.009 | 0.017 | 0.028 | 0.007 | 0.013 | 0.020 | 0.005 | 0.009 | 0.015 | 0.004 | 0.008 | 0.013 | 0.004 | 0.008 | 0.012 |
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate. |
Speeds
Empfohlene Startwerte für Schnittgeschwindigkeit [m/min]
KVNS™ A2™ Series • Recommended Starting Speed [m/min] | |||||||
Grade | KCPK30 | KMF | |||||
Chip Thickness hex mm | Min | Max | Min | Max | |||
Material Group | Max | Start | Min | Max | Start | Min | |
P | 1 | 455 | 395 | 370 | – | – | – |
2 | 280 | 255 | 230 | – | – | – | |
3 | 255 | 230 | 205 | – | – | – | |
4 | 225 | 185 | 160 | – | – | – | |
5 | 190 | 170 | 150 | – | – | – | |
6 | 160 | 135 | 110 | – | – | – | |
M | 1 | 205 | 185 | 155 | – | – | – |
2 | 185 | 160 | 140 | – | – | – | |
3 | 145 | 130 | 115 | – | – | – | |
K | 1 | 295 | 265 | 240 | – | – | – |
2 | 235 | 210 | 190 | – | – | – | |
3 | 195 | 175 | 160 | – | – | – | |
N | 1 | – | – | – | 335 | 298 | 271 |
2 | – | – | – | 335 | 298 | 271 | |
3 | – | – | – | 219 | 198 | 170 | |
S | 1 | – | – | – | 30 | 24 | 20 |
2 | – | – | – | 30 | 24 | 20 | |
3 | – | – | – | 30 | 24 | 20 | |
4 | 50 | 45 | 35 | 24 | 24 | 24 | |
H | 1 | – | – | – | – | – | – |
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. |
Recommended Starting Speeds [SFM]
KVNS™ A2™ Series • Recommended Starting Speed [SFM] | |||||||
Grade | KCPK30 | KMF | |||||
Chip Thickness hex Inch | Min | Max | Min | Max | |||
Material Group | Max | Start | Min | Max | Start | Min | |
P | 1 | 1495 | 1295 | 1215 | – | – | – |
2 | 920 | 835 | 755 | – | – | – | |
3 | 835 | 755 | 675 | – | – | – | |
4 | 740 | 605 | 525 | – | – | – | |
5 | 625 | 560 | 490 | – | – | – | |
6 | 525 | 445 | 360 | – | – | – | |
M | 1 | 675 | 605 | 510 | – | – | – |
2 | 605 | 525 | 460 | – | – | – | |
3 | 475 | 425 | 375 | – | – | – | |
K | 1 | 970 | 870 | 785 | – | – | – |
2 | 770 | 690 | 625 | – | – | – | |
3 | 640 | 575 | 525 | – | – | – | |
N | 1 | – | – | – | 1100 | 980 | 890 |
2 | – | – | – | 1100 | 980 | 890 | |
3 | – | – | – | 720 | 650 | 560 | |
S | 1 | – | – | – | 100 | 80 | 65 |
2 | – | – | – | 100 | 80 | 65 | |
3 | – | – | – | 100 | 80 | 65 | |
4 | 165 | 150 | 115 | 80 | 80 | 80 | |
H | 1 | – | – | – | – | – | – |
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use