Country

Language

Unit of Measure

Product Suggestions

Product Similar To: [Product Name]

Back To [Product] | Modify Similar To

Contact our sales team to discover your pricing options

Round Inserts for KDM • RDHX-LN

Name: Round Inserts for KDM • RDHX-LN
SKU: 100000220
Rating: 0 (0 reviews)

Indexable Inserts • RD.X07...

Features and benefits

LN geometry is the first choice for high-strength steel and hard machining up to 55 HRC.

Malzeme grubu	Hafif işleme		Genel amaçlı kullanım		Ağır işleme
–	(Hafif geometri)		–		(Sert geometri)
–	Aşınma direnci				Tokluk
–	Geometri	Kalite	Geometri	Kalite	Geometri	Kalite
P1–P2	.F..LP	KC522M	.F..LP	KC725M	.S..LN	KC725M
P3–P4	.S..LN	KCPM20	.S..LN	KC522M	.S..LN	KC725M
P5–P6	.S..LN	KC510M	.S..LN	KCPM20	.S..LN	KCPM20
M1–M2	.F..LP	KC522M	.F..LP	KC725M	–	–
M3	.F..LP	KC725M	–	–	–	–
K1–K2	.F..LP	KC510M	.S..LN	KC510M	.S..LN	KC510M
K3	.S..LN	KC510M	.S..LN	KC510M	.S..LN	KC510M
N1–N2	.F..LP	KC510M	.F..LP	KC510M	.F..LP	KC510M
N3	.F..LP	KC510M	.F..LP	KC510M	.F..LP	KC510M
S1–S2	.F..LP	KC522M	.F..LP	KC725M	–	–
S3	.F..LP	KC725M	–	–	–	–
S4	.F..LP	KC725M	–	–	–	–
H1	.S..LN	KC510M	.S..LN	KC510M	.S..LN	KCPM20

At 3,50 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.F..LP	0,08	0,13	0,33	0,06	0,10	0,25	0,06	0,09	0,22	0,05	0,08	0,20	0,05	0,08	0,20	.F..LP
.S..LN	0,14	0,41	0,68	0,11	0,31	0,51	0,09	0,27	0,44	0,09	0,25	0,41	0,09	0,24	0,41	.S..LN
.T..LN	0,17	0,43	0,68	0,13	0,32	0,51	0,11	0,28	0,44	0,10	0,26	0,41	0,10	0,25	0,41	.T..LN

At 1,75 Axial Depth of Cut (ap)

Hafif işleme

Genel amaçlı kullanım

Ağır işleme

At 1,00 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.F..LP	0,10	0,15	0,39	0,07	0,12	0,29	0,06	0,10	0,25	0,06	0,09	0,24	0,06	0,09	0,23	.F..LP
.S..LN	0,17	0,47	0,79	0,12	0,35	0,59	0,11	0,31	0,51	0,10	0,29	0,48	0,10	0,28	0,47	.S..LN
.T..LN	0,20	0,49	0,79	0,15	0,37	0,59	0,13	0,32	0,51	0,12	0,30	0,48	0,12	0,29	0,47	.T..LN

At 0,50 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.F..LP	0,16	0,26	0,65	0,12	0,19	0,49	0,11	0,17	0,42	0,10	0,16	0,40	0,10	0,16	0,39	.F..LP
.S..LN	0,28	0,80	1,33	0,21	0,59	0,99	0,18	0,52	0,86	0,17	0,48	0,81	0,17	0,47	0,79	.S..LN
.T..LN	0,33	0,83	1,33	0,25	0,62	0,99	0,22	0,54	0,86	0,20	0,50	0,81	0,20	0,49	0,79	.T..LN

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.F..LP	0,12	0,19	0,48	0,09	0,14	0,36	0,08	0,12	0,31	0,07	0,12	0,29	0,07	0,11	0,29	.F..LP
.S..LN	0,21	0,58	0,98	0,15	0,44	0,73	0,13	0,38	0,63	0,13	0,36	0,59	0,12	0,35	0,58	.S..LN
.T..LN	0,24	0,61	0,98	0,18	0,45	0,73	0,16	0,40	0,63	0,15	0,37	0,59	0,15	0,36	0,58	.T..LN

At .138 Axial Depth of Cut (ap)

Hafif işleme

Genel amaçlı kullanım

Ağır işleme

At .069 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.F..LP	.003	.005	.014	.003	.004	.010	.002	.003	.009	.002	.003	.008	.002	.003	.008	.F..LP
.S..LN	.006	.016	.028	.004	.012	.020	.004	.010	.018	.003	.010	.016	.003	.010	.016	.S..LN
.T..LN	.007	.017	.028	.005	.013	.020	.004	.011	.018	.004	.010	.016	.004	.010	.016	.T..LN

At .034 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.F..LP	.004	.006	.016	.003	.005	.012	.003	.004	.010	.002	.004	.009	.002	.004	.009	.F..LP
.S..LN	.007	.019	.032	.005	.014	.023	.004	.012	.020	.004	.011	.019	.004	.011	.018	.S..LN
.T..LN	.008	.020	.032	.006	.015	.023	.005	.013	.020	.005	.012	.019	.005	.012	.018	.T..LN

At .017 Axial Depth of Cut (ap)

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.F..LP	.007	.011	.028	.005	.008	.021	.005	.007	.018	.004	.007	.017	.004	.007	.017	.F..LP
.S..LN	.012	.034	.059	.009	.025	.042	.008	.022	.036	.007	.020	.034	.007	.020	.033	.S..LN
.T..LN	.014	.036	.059	.010	.026	.042	.009	.023	.036	.008	.021	.034	.008	.021	.033	.T..LN

Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.															Kesici uç geometrisi
	10%			20%			30%			40%			50–100%
.F..LP	.005	.008	.021	.004	.006	.015	.003	.005	.013	.003	.005	.012	.003	.005	.012	.F..LP
.S..LN	.009	.025	.042	.006	.018	.031	.006	.016	.027	.005	.015	.025	.005	.015	.024	.S..LN
.T..LN	.010	.026	.042	.008	.019	.031	.007	.017	.027	.006	.015	.025	.006	.015	.024	.T..LN

Recommended Starting Speeds [m/min]

Malzeme grubu		KC510M			KC522M			KC725M			KCPM20			KTPK20
P	1	–	–	–	395	345	325	315	275	255	660	580	535	440	360	310
	2	–	–	–	330	290	240	260	230	195	410	370	330	270	225	190
	3	–	–	–	305	255	215	240	205	170	370	330	305	245	205	170
	4	295	240	200	270	225	180	215	180	145	275	255	230	185	160	130
	5	–	–	–	225	200	180	180	160	145	330	300	275	255	205	175
	6	–	–	–	200	150	120	160	120	95	230	200	175	150	125	–
M	1	–	–	–	245	215	200	205	180	165	270	240	205	285	235	200
	2	–	–	–	225	190	160	185	160	130	245	215	190	260	220	185
	3	–	–	–	170	145	115	140	120	95	195	175	150	195	160	–
K	1	350	315	285	275	250	220	–	–	–	435	390	350	275	235	195
	2	275	250	230	215	195	180	–	–	–	345	310	280	220	180	160
	3	235	205	190	180	160	145	–	–	–	290	255	240	185	150	130
N	1–2	770	685	630	–	–	–	–	–	–	–	–	–	–	–	–
	3	695	640	585	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	50	45	35	45	35	30	–	–	–	–	–	–
	2	–	–	–	50	45	35	45	35	30	–	–	–	–	–	–
	3	–	–	–	60	50	35	55	45	30	–	–	–	–	–	–
	4	–	–	–	85	60	45	75	55	35	–	–	–	–	–	–
H	1	190	155	110	145	110	85	–	–	–	170	140	115	–	–	–

Recommended Starting Speeds [SFM]

Malzeme grubu		KC510M			KC522M			KC725M			KCPM20			KTPK20
P	1	–	–	–	1300	1130	1060	1030	900	840	2170	1910	1760	1440	1180	1010
	2	–	–	–	1080	950	790	860	760	640	1340	1210	1090	890	740	620
	3	–	–	–	1000	840	700	790	670	550	1210	1090	1000	800	670	560
	4	960	780	660	890	730	590	710	590	470	910	840	760	600	520	430
	5	–	–	–	730	660	590	590	530	470	1090	980	900	830	680	580
	6	–	–	–	650	490	400	520	400	310	760	660	570	500	410	–
M	1	–	–	–	800	710	650	670	590	540	880	790	680	940	770	650
	2	–	–	–	730	620	520	610	520	430	800	700	620	850	720	600
	3	–	–	–	550	480	370	460	400	310	640	570	490	640	530	–
K	1	1150	1040	940	900	820	720	–	–	–	1420	1280	1150	910	770	640
	2	910	820	760	710	640	590	–	–	–	1130	1010	920	720	590	520
	3	770	680	620	590	530	480	–	–	–	950	840	780	600	500	420
N	1–2	2520	2240	2060	–	–	–	–	–	–	–	–	–	–	–	–
	3	2280	2100	1920	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	160	140	110	140	120	100	–	–	–	–	–	–
	2	–	–	–	160	140	110	140	120	100	–	–	–	–	–	–
	3	–	–	–	200	160	110	180	140	100	–	–	–	–	–	–
	4	–	–	–	280	200	140	240	180	120	–	–	–	–	–	–
H	1	630	510	360	470	360	280	–	–	–	550	460	370	–	–	–

Welcome

Please confirm your preferences

Update Preferences

Product Suggestions

Product Family suggestions

Contact the Sales Team

Contact the Sales Team

Editing Solution

Adding Solution

Product Similar To: [Product Name]

Round Inserts for KDM • RDHX-LN

Indexable Inserts • RD.X07...

Features and benefits

At 3,50 Axial Depth of Cut (ap)

At 1,75 Axial Depth of Cut (ap)

At 1,00 Axial Depth of Cut (ap)

At 0,50 Axial Depth of Cut (ap)

At .138 Axial Depth of Cut (ap)

At .069 Axial Depth of Cut (ap)

At .034 Axial Depth of Cut (ap)

At .017 Axial Depth of Cut (ap)

Recommended Starting Speeds [m/min]

Recommended Starting Speeds [SFM]

Product Suggestions

Product Family suggestions

Contact the Sales Team

Notifications

Contact the Sales Team

Product Similar To: [Product Name]

Sending to {{cadTool}} in progress...

Round Inserts for KDM • RDHX-LN

Indexable Inserts • RD.X07...

Features and benefits

At 3,50 Axial Depth of Cut (ap)

At 1,75 Axial Depth of Cut (ap)

At 1,00 Axial Depth of Cut (ap)

At 0,50 Axial Depth of Cut (ap)

At .138 Axial Depth of Cut (ap)

At .069 Axial Depth of Cut (ap)

At .034 Axial Depth of Cut (ap)

At .017 Axial Depth of Cut (ap)

Recommended Starting Speeds [m/min]

Recommended Starting Speeds [SFM]

The following files are available