Tube Sheet Groover
Tube sheet groover tools feature a unique approach for manufacturing two grooves simultaneously -- especially in heat exchanger manufacturing. All tubes need a finish operation to connect them, and our grooving KCU45™ inserts are a special grade for machining a wide variety of materials including low-carbon steel, stainless steel, and nickel alloys. The geometry leads to a burr-free cut, flexibility in hole diameter, and an interrupted cut for effective chip control. The minimal amount of tungsten carbide used in the insert eliminates the need for refurbishment enabling the tool to work faster with a lower cost per hole.
Filters
Filters
View filters in
MetricInch
Applications
Applications
Grooving (1)
Slot Milling (5)
Slot Side (5)
Slot Square End (5)
Cutting Diameter
Cutting Diameter
- 0.623 in(1)
- 0.743 in(4)
to
Cutting Diameter
Cutting Diameter
- 15.82 mm(1)
- 18.87 mm(4)
to
Reach
Reach
- 0.968 in(1)
- 1.009 in(1)
- 1.045 in(1)
- 1.968 in(1)
- 2.045 in(1)
to
Reach
Reach
- 24.58 mm(1)
- 25.63 mm(1)
- 26.55 mm(1)
- 49.99 mm(1)
- 51.95 mm(1)
to
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (5)
to
Connection Style
Connection Style
- Straight-Cylindrical (2)
- Whistle Notch 2 (3)
Number of Flutes
Number of Flutes
- 3 (1)
- 4 (4)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 3.875 in(2)
- 3.976 in(1)
- 4.875 in(2)
to
Over All Length [L]
Over All Length [L]
- 98.42 mm(2)
- 101.0 mm(1)
- 123.82 mm(2)
to
Application
Hand Of Tool
Hand Of Tool
- R (5)
Wiper Insert
Wiper Insert
- N (2)
Front-End
Cutting Width
Cutting Width
- 0.118 in(1)
- 0.125 in(1)
to
Cutting Width
Cutting Width
- 3.0 mm(1)
- 3.18 mm(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 0.039 in(5)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 1.0 mm(5)
to
Center Cutting
Center Cutting
Insert Geometry
Shape
Shape
- GROOVING/CUTOFF MISC (2)
Cutting Tool Material
Cutting Tool Material
- H W (2)
Back-End
Connection Type
Connection Type
- CYLINDRICAL (5)
Back-End Diameter
Back-End Diameter
- 19.05 mm(2)
- 20.0 mm(3)
to
Back-End Diameter
Back-End Diameter
- 0.75 in(2)
- 0.787 in(1)
- 0.7874 in(2)
to
No filters matching ""
