KM Micro™ OD Applications • A4™ Grooving and Cut-Off
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (14)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(14)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(14)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(14)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(14)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(14)
- M Stainless Steel (14)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(14)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(14)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(14)
- K Cast Iron (14)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(14)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(14)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(14)
- N Non-Ferrous Materials (14)
- N1Wrought Aluminum (14)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(14)
- N3High-Silicon Aluminum Alloys Si >12.2%(4)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (14)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (14)
- N6Carbon, Graphite Composites, CFRP (14)
- N7MMC's (4)
- S High-Temp Alloys (14)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(14)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(14)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(14)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(14)
- H Hardened Materials (10)
- H1Hardened Materials 44-48 HRC(10)
- H2Hardened Materials 48-55 HRC(10)
- H3Hardened Materials 56-60 HRC(4)
- H4Hardened Materials >60 HRC(4)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (14)
- Lightly Interrupted Cut (14)
- Smooth Cut (14)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (4)
- 2.0 (14)
to
Corner Radius
Corner Radius
- 0.006 in(4)
- 0.008 in(10)
- 0.016 in(4)
- 0.039 in(4)
- 0.041 in(4)
- 0.06 in(4)
- 0.063 in(4)
to
Corner Radius
Corner Radius
- 0.151 mm(4)
- 0.2 mm(10)
- 0.4 mm(4)
- 1.0 mm(4)
- 1.05 mm(4)
- 1.5 mm(4)
- 1.526 mm(4)
- 1.6 mm(4)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (10)
- KB1630 (4)
- KB5625 (4)
- KBH20 (4)
- KC5010 (10)
- KC5025 (14)
- KC9110 (10)
- KC9125 (10)
- KCK20 (4)
- KCP10 (8)
- KCP25 (10)
- KCU10 (10)
- KCU10B (10)
- KCU25 (14)
- KD1405 (4)
- KMS (4)
- KT315 (10)
- KU10 (8)
- KU30T (4)
- KY3500 (4)
Hand Of Tool
Hand Of Tool
- L (7)
- R (7)
F Dimension
F Dimension
- 8.0 mm(6)
- 10.0 mm(8)
to
F Dimension
F Dimension
- 0.315 in(6)
- 0.394 in(8)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 1.024 in(2)
- 1.063 in(2)
- 1.26 in(10)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 26.0 mm(2)
- 27.0 mm(2)
- 32.0 mm(10)
to
Front-End
Cutting Width
Cutting Width
- 0.06 in(4)
- 0.079 in(4)
- 0.084 in(4)
- 0.094 in(2)
- 0.095 in(2)
- 0.097 in(2)
- 0.098 in(2)
- 0.104 in(2)
- 0.119 in(4)
- 0.12 in(4)
- 0.122 in(4)
- 0.123 in(4)
- 0.125 in(4)
- 0.13 in(4)
to
Cutting Width
Cutting Width
- 1.5 mm(4)
- 2.0 mm(4)
- 2.125 mm(4)
- 2.375 mm(2)
- 2.401 mm(2)
- 2.475 mm(2)
- 2.5 mm(2)
- 2.625 mm(2)
- 3.0 mm(4)
- 3.051 mm(4)
- 3.1 mm(4)
- 3.125 mm(4)
- 3.176 mm(4)
- 3.301 mm(4)
to
Insert Size
Insert Size
- 1 (4)
- 2 (4)
- 2B (2)
- 3 (4)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.531 in(2)
- 0.572 in(2)
- 0.63 in(10)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 13.5 mm(2)
- 14.5 mm(2)
- 16.0 mm(10)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (4)
- B L (4)
- C N (4)
- D P (4)
- H T (10)
- H W (14)
Back-End
System Size
System Size
- KM12 (6)
- KM16 (8)
Back-End Diameter
Back-End Diameter
- 12.0 mm(6)
- 16.0 mm(8)
to
Back-End Diameter
Back-End Diameter
- 0.473 in(6)
- 0.63 in(8)
to
No filters matching ""