Product Similar To:
Inserts for Fix-Perfect™ • Aluminium • BGHX15L5... • -GG • Roughing
Indexable Inserts for Fix-Perfect • BGHX15L5...
Material Number1795485
ISO Catalog IDBGHX15L5PCERGGTANSI Catalog IDBGHX15L5PCERGGT
- N Non-Ferrous
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Material Number | 1795485 |
ISO Catalog ID | BGHX15L5PCERGGT |
ANSI Catalog ID | BGHX15L5PCERGGT |
Grade | KD1410 |
[L10] Insert Cutting Edge Length | 5.2 mm |
[L10] Insert Cutting Edge Length | .2047 in |
[S] Insert Thickness | 5 mm |
[S] Insert Thickness | .1969 in |
[BS] Corner Facet Length | 0.9 mm |
[BS] Corner Facet Length | .0354 in |
Average Chip Thickness [HM] | 0.02 mm |
Average Chip Thickness [HM] | .0008 in |
Cutting Edges per Insert | 1 |
Workpiece Materials
- Non-Ferrous
Grades
KD1410
A PCD-tip brazed to carbide for machining aluminum with a very high silicon content, abrasive non-ferrous materials, and fiber-reinforced plastics. KD1410 can be used at very high cutting speeds, even where good surface finishes are required. This grade can be used both wet or dry but is suggested to use coolant where good surface finishes are required.
Features and benefits
- Roughing Fix-Perfect inserts for aluminum and non-ferrous materials.
- 0.374″ (9,5mm) max depth of cut.
- Two cutting edges.
Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
Insert Selection
Material Group | Light | General | Heavy | |||
– | (Light geometry) | (Strong geometry) | ||||
– | wear | toughness | ||||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | – | – | – | – | – | – |
P3–P4 | – | – | – | – | – | – |
P5–P6 | – | – | – | – | – | – |
M1–M2 | – | – | – | – | – | – |
M3 | – | – | – | – | – | – |
K1–K2 | – | – | – | – | – | – |
K3 | – | – | – | – | – | – |
N1–N2 | BGHX… | K110M | BGHX… | KC510M | BGHX… | KD1415 |
N3 | BGHX… | K110M | BGHX… | KD1410 | BGHX… | KD1410 |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | – | – | – | – | – | – |
H1 | – | – | – | – | – | – |
Feeds
Recommended Starting Feeds [IPT]
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40 | ||||||||||||
BGHX… | .005 | .014 | .023 | .003 | .010 | .017 | .003 | .008 | .013 | .002 | .007 | .011 | .002 | .006 | .010 | BGHX… |
Light | General | Heavy |
Speeds
Recommended Starting Speeds [SFM]
Material Group | K110M | KC510M | KD1410 | KD1415 | |||||||||
P | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | – | – | – | – | – | – | |
5 | – | – | – | – | – | – | – | – | – | – | – | – | |
6 | – | – | – | – | – | – | – | – | – | – | – | – | |
M | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
K | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
N | 1–2 | 1650 | 1550 | 1475 | 2100 | 1870 | 1720 | 13150 | 11500 | 9800 | 13150 | 11500 | 9800 |
3 | 1350 | 1200 | 1050 | 1900 | 1750 | 1600 | 5250 | 4900 | 4600 | 5250 | 4900 | 4600 | |
S | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | – | – | – | – | – | – | |
H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use