BF Bodies

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (46)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(46)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(46)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(46)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(46)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(46)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(46)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(46)
    • M Stainless Steel (46)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(46)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(46)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(46)
    • K Cast Iron (46)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(46)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(46)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(46)
    • N Non-Ferrous Materials (46)
      • N1
        Wrought Aluminum (46)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(46)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(46)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (46)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (46)
      • N6
        Carbon, Graphite Composites, CFRP (46)
      • N7
        MMC's (46)
    • S High-Temp Alloys (46)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(46)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(46)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(46)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(46)
    Applications
    Applications
    • CountersinkingCountersinking (46)
    • DrillingDrilling (46)
    • Inclined Exit DrillingInclined Exit Drilling (46)
    • Stacked Plates DrillingStacked Plates Drilling (46)
    Cutting Diameter
    Cutting Diameter
    • 0.125 in(1)
    • 0.134 in(1)
    • 0.161 in(2)
    • 0.181 in(2)
    • 0.182 in(1)
    • 0.201 in(2)
    • 0.213 in(1)
    • 0.219 in(2)
    • 0.24 in(2)
    • 0.25 in(1)
    • 0.281 in(1)
    • 0.288 in(2)
    • 0.319 in(3)
    • 0.328 in(1)
    • 0.358 in(2)
    • 0.359 in(1)
    • 0.398 in(2)
    • 0.408 in(1)
    • 0.437 in(3)
    • 0.48 in(2)
    • 0.484 in(1)
    • 0.516 in(3)
    • 0.555 in(2)
    • 0.564 in(1)
    • 0.61 in(2)
    • 0.625 in(1)
    • 0.65 in(1)
    • 0.69 in(2)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 3.176 mm(1)
    • 3.401 mm(1)
    • 4.101 mm(2)
    • 4.601 mm(2)
    • 4.625 mm(1)
    • 5.101 mm(2)
    • 5.4 mm(1)
    • 5.551 mm(2)
    • 6.101 mm(2)
    • 6.351 mm(1)
    • 7.15 mm(1)
    • 7.301 mm(2)
    • 8.1 mm(3)
    • 8.326 mm(1)
    • 9.1 mm(2)
    • 9.125 mm(1)
    • 10.101 mm(2)
    • 10.326 mm(1)
    • 11.101 mm(3)
    • 12.201 mm(2)
    • 12.3 mm(1)
    • 13.101 mm(3)
    • 14.101 mm(2)
    • 14.3 mm(1)
    • 15.5 mm(2)
    • 15.875 mm(1)
    • 16.5 mm(1)
    • 17.5 mm(2)
    Cutting Diameter MintoCutting Diameter Max
    Connection Style
    Connection Style
    • Straight-Cylindrical (29)
    • Whistle Notch 2 (17)
    Number of Flutes
    Number of Flutes
    • 1 (21)
    • 2 (25)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (31)
    • 1.0 (46)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 3.446 in(12)
    • 3.831 in(9)
    • 4.311 in(1)
    • 4.622 in(6)
    • 5.005 in(9)
    • 5.016 in(8)
    • 5.142 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 87.5 mm(12)
    • 97.301 mm(9)
    • 109.5 mm(1)
    • 117.4 mm(6)
    • 127.101 mm(9)
    • 127.4 mm(8)
    • 130.6 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • CD3 (46)
    • CS5 (46)
    • KC7315 (46)
    • KC7320 (9)
    • KC7410 (31)
    • KCP15 (31)
    • KCPM45 (31)
    • KM1 (46)
    • KMF (46)
    • P30 (46)
    Countersunk Angle
    Countersunk Angle
    • 30.0 (46)
    • 41.0 (46)
    • 45.0 (46)
    • 50.0 (22)
    Countersunk Angle MintoCountersunk Angle Max
    Front-End
    Insert Shape
    Insert Shape
    • COUNTERBORE/COUNTERSINK MISC (46)
    • KENTIP DRILL (31)
    Back-End
    Back-End Diameter
    Back-End Diameter
    • 19.05 mm(5)
    • 20.0 mm(16)
    • 25.401 mm(5)
    • 31.75 mm(3)
    • 32.0 mm(17)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.75 in(5)
    • 0.787 in(16)
    • 1.0 in(5)
    • 1.25 in(3)
    • 1.26 in(17)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?