Welcome
Please confirm your preferences
Update Preferences
Product Suggestions
Product Family suggestions
Hi, Sign In
Your Selected Account:
There is an issue with your account. Please contact customer support.
Sold To Account Change Account
Ship To Account Change Account
Take advantage of these exclusive deals before it is too late! See Promotions
V-Bottom
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
- P Steel (13)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(13)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(13)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(13)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(13)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(13)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(13)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(13)
- M Stainless Steel (13)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(13)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(13)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(13)
- K Cast Iron (13)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(13)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(13)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(13)
- N Non-Ferrous Materials (13)
- N1Wrought Aluminum (13)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(13)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (13)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (13)
- N6Carbon, Graphite Composites, CFRP (13)
- S High-Temp Alloys (13)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(13)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(13)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(13)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(13)
- H Hardened Materials (13)
- H1Hardened Materials 44-48 HRC(13)
Applications
Applications
Facing (17)
Multiple Direction Cutting (17)
Profiling (14)
Turning (17)
Cutting Condition
Cutting Condition
- Lightly Interrupted Cut (13)
- Smooth Cut (13)
- Varying Depth of Cut (13)
=
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (6)
- 90.0 (11)
Tool Cutting Edge Angle MinEnter ValuetoTool Cutting Edge Angle MaxTool Cutting Edge Angle
=
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (13)
Cutting Edges Per Insert MinEnter ValuetoCutting Edges Per Insert MaxCutting Edges Per Insert
=
Over All Length [L]
Over All Length [L]
- 5.955 in(3)
- 6.0 in(10)
- 6.742 in(4)
Over All Length [L] MinEnter ValuetoOver All Length [L] MaxOver All Length [L]
=
Over All Length [L]
Over All Length [L]
- 151.25 mm(3)
- 152.4 mm(10)
- 171.25 mm(4)
Over All Length [L] MinEnter ValuetoOver All Length [L] MaxOver All Length [L]
Corner configuration
≈
Corner Radius
Corner Radius
- 0.125 in(4)
- 0.188 in(4)
- 0.25 in(5)
Corner Radius MinEnter ValuetoCorner Radius MaxCorner Radius
≈
Corner Radius
Corner Radius
- 3.176 mm(4)
- 4.775 mm(4)
- 6.351 mm(5)
Corner Radius MinEnter ValuetoCorner Radius MaxCorner Radius
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC5010 (13)
- KCS10 (13)
- KCS10B (13)
- KY1540 (9)
- KY4300 (13)
- KYS25 (9)
- KYS30 (9)
Hand Of Tool
Hand Of Tool
- L (3)
- N (8)
- R (6)
Wiper Insert
Wiper Insert
- N (13)
=
F Dimension
F Dimension
- 12.5 mm(2)
- 12.601 mm(2)
- 15.775 mm(2)
- 16.0 mm(2)
- 25.401 mm(1)
- 31.75 mm(2)
- 32.0 mm(1)
- 38.1 mm(3)
- 40.0 mm(2)
F Dimension MinEnter ValuetoF Dimension MaxF Dimension
=
F Dimension
F Dimension
- 0.492 in(2)
- 0.496 in(2)
- 0.621 in(2)
- 0.63 in(2)
- 1.0 in(1)
- 1.25 in(2)
- 1.26 in(1)
- 1.5 in(3)
- 1.575 in(2)
F Dimension MinEnter ValuetoF Dimension MaxF Dimension
Cutting Direction
Cutting Direction
- B (6)
- E (8)
- S (3)
Front-End
=
Maximum Cutting Depth
Maximum Cutting Depth
- 0.25 in(3)
- 0.276 in(1)
- 0.315 in(2)
- 0.748 in(1)
- 0.75 in(2)
- 1.131 in(1)
- 1.143 in(1)
- 1.496 in(2)
- 1.5 in(4)
Maximum Cutting Depth MinEnter ValuetoMaximum Cutting Depth MaxMaximum Cutting Depth
=
Maximum Cutting Depth
Maximum Cutting Depth
- 6.351 mm(3)
- 7.0 mm(1)
- 8.0 mm(2)
- 19.0 mm(1)
- 19.05 mm(2)
- 28.701 mm(1)
- 29.0 mm(1)
- 38.0 mm(2)
- 38.1 mm(4)
Maximum Cutting Depth MinEnter ValuetoMaximum Cutting Depth MaxMaximum Cutting Depth
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- C A (13)
- C N (9)
- H W (13)
Back-End
=
Shank Height
Shank Height
- 0.984 in(3)
- 1.0 in(5)
- 1.25 in(5)
- 1.26 in(4)
Shank Height MinEnter ValuetoShank Height MaxShank Height
=
Shank Height
Shank Height
- 25.0 mm(3)
- 25.401 mm(5)
- 31.75 mm(5)
- 32.0 mm(4)
Shank Height MinEnter ValuetoShank Height MaxShank Height
=
Shank Width
Shank Width
- 0.984 in(3)
- 1.0 in(5)
- 1.25 in(5)
- 1.26 in(4)
Shank Width MinEnter ValuetoShank Width MaxShank Width
=
Shank Width
Shank Width
- 25.0 mm(3)
- 25.401 mm(5)
- 31.75 mm(5)
- 32.0 mm(4)
Shank Width MinEnter ValuetoShank Width MaxShank Width
No filters matching ""
