Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (153)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(153)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(153)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(153)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(153)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(153)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(153)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(153)
- M Stainless Steel (98)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(98)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(98)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(98)
- K Cast Iron (92)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(92)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(92)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(92)
- N Non-Ferrous Materials (37)
- N1Wrought Aluminum (37)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(37)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (37)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (37)
- N6Carbon, Graphite Composites, CFRP (37)
- S High-Temp Alloys (79)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(79)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(79)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(79)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(79)
- C CFRP Materials (24)
- C1CFRP, CFRP / CFRP (24)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (81)
- Lightly Interrupted Cut (87)
- Smooth Cut (140)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 2.0 (82)
- 4.0 (14)
- 8.0 (57)
to
Corner Radius
Corner Radius
- 0.012 in(35)
- 0.016 in(17)
- 0.02 in(50)
- 0.031 in(35)
- 0.039 in(7)
- 0.047 in(9)
to
Corner Radius
Corner Radius
- 0.3 mm(35)
- 0.4 mm(17)
- 0.5 mm(50)
- 0.8 mm(35)
- 1.0 mm(7)
- 1.2 mm(9)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- KCP10 (10)
- KCP25 (45)
- KCP40 (19)
- KCU10 (24)
- KCU10B (24)
- KCU25 (18)
- KCU25B (13)
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (19)
- D-DIAMOND/RHOMBIC 55 (16)
- FIX-PERFECT 2 CUT EDGES (62)
- FIX-PERFECT 4 CUT EDGES (10)
- FIX-PERFECT 8 CUT EDGES (46)
Insert Geometry
Shape
Shape
- C-DIAMOND/RHOMBIC 80 (19)
- D-DIAMOND/RHOMBIC 55 (16)
- FIX-PERFECT 2 CUT EDGES (62)
- FIX-PERFECT 4 CUT EDGES (10)
- FIX-PERFECT 8 CUT EDGES (46)
Cutting Edge Length
Cutting Edge Length
- 6.7 mm(7)
- 6.9 mm(4)
- 7.0 mm(2)
- 7.1 mm(6)
- 7.2 mm(4)
- 7.3 mm(10)
- 7.8 mm(1)
- 8.6 mm(2)
- 8.8 mm(2)
- 8.9 mm(7)
- 9.3 mm(8)
- 10.0 mm(13)
- 10.1 mm(5)
- 10.5 mm(8)
- 10.6 mm(4)
- 10.7 mm(10)
- 10.9 mm(2)
- 11.1 mm(1)
- 13.6 mm(5)
- 13.9 mm(7)
- 14.0 mm(3)
- 14.1 mm(9)
- 14.2 mm(2)
- 14.5 mm(12)
- 14.6 mm(6)
- 14.7 mm(9)
- 17.5 mm(4)
to
Cutting Edge Length
Cutting Edge Length
- 0.264 in(7)
- 0.272 in(4)
- 0.276 in(2)
- 0.28 in(6)
- 0.283 in(4)
- 0.287 in(10)
- 0.306 in(1)
- 0.339 in(2)
- 0.345 in(2)
- 0.35 in(7)
- 0.366 in(8)
- 0.394 in(13)
- 0.396 in(5)
- 0.4134 in(8)
- 0.417 in(4)
- 0.419 in(1)
- 0.423 in(7)
- 0.429 in(2)
- 0.432 in(2)
- 0.437 in(1)
- 0.535 in(5)
- 0.549 in(7)
- 0.551 in(3)
- 0.554 in(9)
- 0.56 in(2)
- 0.571 in(11)
- 0.5716 in(1)
- 0.574 in(5)
- 0.575 in(1)
- 0.578 in(8)
- 0.579 in(1)
- 0.689 in(4)
to
Chip Breaker CBMD
Chip Breaker CBMD
- FN (3)
- HP (24)
- MN (57)
- MP (17)
- MS (8)
- RN (29)
- RP (14)
No filters matching ""
