Product Similar To:
DUO-LOCK™ • KenFeed™ • KSDB • Radiused • 6 Flutes • Inch
DUO-LOCK™ • KenFeed™ • 6 Flutes
Material Number6626761
ISO Catalog IDKSDB0500Y6BQXANSI Catalog IDKSDB0500Y6BQX
- P Steel
- M Stainless Steel
- S High-Temp Alloys
- Shank: Duo-Lock Coupling
- Ramping: Blank
- 3D Profiling
- Tool Dimensions: Flute Configuration: 6
- Corner Style: Torus
- Helix Angle: 20°
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Material Number | 6626761 |
ISO Catalog ID | KSDB0500Y6BQX |
ANSI Catalog ID | KSDB0500Y6BQX |
Grade | KC643M |
Adapter Style Machine Side | DUO-LOCK |
[D] Adapter / Shank / Bore Diameter | 12.2 mm |
[D] Adapter / Shank / Bore Diameter | .4803 in |
[AP1MAX] 1st Maximum Cutting Depth | 0.68 mm |
[AP1MAX] 1st Maximum Cutting Depth | .0268 in |
[L1] Gage Length | 22.25 mm |
[L1] Gage Length | 1.126 in |
[CSMS] System Size Machine Side | DL12 |
[WF] Width of Flat | 9.5 mm |
[WF] Width of Flat | .374 in |
[Re] Corner Radius | 0.794 mm |
[Re] Corner Radius | .0313 in |
[Z] Number of Flutes | 6 |
[D1] Effective Cutting Diameter | 12.7 mm |
[D1] Effective Cutting Diameter | .5 in |
Workpiece Materials
- Steel
- Stainless Steel
- High-Temp Alloys
Uses and application
- Shank: Duo-Lock Coupling
- Ramping: Blank
- 3D Profiling
- Tool Dimensions: Flute Configuration: 6
- Corner Style: Torus
- Helix Angle: 20°
Grades
KC643M
Coated fine-grain grade with PVD multilayer (AlTiN). KC643M™ is a very thin and hard PVD coating particularly suited for cutting steel, cast iron, stainless steel (wet), and titanium (wet). This grade can be used for materials with hardness up to 52 HRC.
Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
TechnicalInfo
Geometrical Parameters | ramping guide for circular and linear interpolation | |||||||||||||||
Circular Interpolation | linear interpolation | |||||||||||||||
allowed range of hole diameter | Calculated Length per Ramp Angle | |||||||||||||||
catalog number | D1 | Ap1 max | Rfm | Rt | Rc | Xfm | Yfm | YD | number | Smallest | Largest | 1º | 2º | 3º | 4º | 5º |
KSDB0375Y6BQX | 3/8 | .020 | 3/8 | .0399 | .0235 | .0200 | .0469 | .0788 | 6 | .5325 | .75 | 1.14 | .57 | .38 | .29 | .23 |
KSDB0500Y6BQX | 1/2 | .027 | 1/2 | .0538 | .0320 | .0266 | .0625 | .1050 | 6 | .7100 | 1.00 | 1.52 | .76 | .51 | .38 | .30 |
KSDB0625Y6BQX | 5/8 | .034 | 5/8 | .0672 | .0400 | .0333 | .0781 | .1313 | 6 | .8875 | 1.25 | 1.91 | .95 | .63 | .48 | .38 |
KSDB0750Y6BQX | 3/4 | .040 | 3/4 | .0798 | .0470 | .0399 | .0938 | .1575 | 6 | 1.0650 | 1.50 | 2.29 | 1.14 | .76 | .57 | .46 |
recommended degree of programmed feed rate to use while ramping | 100% | 70% | 50% | 30% | 10% |
I have read and accepted the Terms & Conditions of use