Trochoidal Milling
Schräg-Eintauchfräsen 5°
Umfangfräsen/Schulterfräsen: Ebene Stirnfläche
Werkzeugabmessungen: Schneidreihen: 5 
Zylinderschaft – Weldon
Spiralwinkel: 40°
Schneideckenausführung: EckenradiusDownloaded file will be available after import in the {{cadTool}} tool library.
| Material Nummer | 6769786 |
| ISO Katalog Nummer | KOR5RA0250R075HBR030 |
| ANSI Katalog Nummer | KOR5RA0250R075HBR030 |
| Sorte | KC643M |
| Aufnahmeart Maschinenseite | Weldon |
| [Re] Eckenradius | 0.762 mm |
| [Re] Eckenradius | .03 in |
| [Z] Anzahl der Spannuten | 5 |
| [D1] Effektiver Schneidendurchmesser | 6.35 mm |
| [D1] Effektiver Schneidendurchmesser | .25 in |
| [D] Adapter/Schaft/Bohrungsdurchmesser | 6.35 mm |
| [D] Adapter/Schaft/Bohrungsdurchmesser | .25 in |
| [AP1MAX] 1. maximale Schnitttiefe | 19.05 mm |
| [AP1MAX] 1. maximale Schnitttiefe | .75 in |
| [L] Gesamtlänge | 63.5 mm |
| [L] Gesamtlänge | 2.5 in |
Trochoidal MillingSchräg-Eintauchfräsen 5°Umfangfräsen/Schulterfräsen: Ebene StirnflächeWerkzeugabmessungen: Schneidreihen: 5 Zylinderschaft – WeldonSpiralwinkel: 40°Schneideckenausführung: EckenradiusGrades
KC643M
Feinkörnige Sorte mit mehrlagiger PVD-Beschichtung (AlTiN). Mit seiner sehr dünnen und harten PVD-Beschichtung eignet sich KC643M™ besonders zur Bearbeitung von Stahl, Gusseisen, nicht rostendem Stahl (nass) und Titan (nass). Diese Sorte kann für Werkstoffe mit einer Härte von bis zu 52 HRC verwendet werden.
Lösung erstellen, um Vorschübe und Geschwindigkeiten zu berechnen
Nachdem Sie eine Lösung erstellt haben, wählen Sie einfach das Symbol für Vorschübe und Geschwindigkeiten und unser System gibt Ihnen Empfehlungen. Sie können die Informationen anpassen, indem Sie Ihre Maschine und Spezifikationen hinzufügen oder Anpassungen mithilfe der Schieberegler vornehmen.
| Ae/D1 | 0.50% | 1.00% | 1.50% | 2.00% | 4.00% | 5.00% | 8.00% | 10.00% | |
| Speed factor | Kv | 2.15 | 2.11 | 2.07 | 1.48 | 1.11 | 1.07 | 1.04 | 1.00 |
| Feed factor | KFz | 1.65 | 1.53 | 1.47 | 1.41 | 1.35 | 1.29 | 1.18 | 1.00 |
| Werkstoffgruppe |  |  | |||||||||||
| Schulterfräsen (A) | Recommended feed per tooth (IPT = inch/th) for side milling (A). | ||||||||||||
| A | KC643M | D1 | |||||||||||
| Schnittgeschwindigkeit | frac. | 1/4 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | ||||||
| ap | ae | Min. | Max. | dec. | .2500 | .3750 | .5000 | .6250 | .7500 | 1.0000 | |||
| P | 0 | 3 x D | 0.1 x D | 500 | – | 1440 | IPT | .0022 | .0033 | .0041 | .0047 | .0053 | .0059 |
| 1 | 3 x D | 0.1 x D | 500 | – | 1440 | IPT | .0022 | .0033 | .0041 | .0047 | .0053 | .0059 | |
| 2 | 3 x D | 0.1 x D | 460 | – | 1370 | IPT | .0022 | .0033 | .0041 | .0047 | .0053 | .0059 | |
| 3 | 3 x D | 0.1 x D | 400 | – | 1150 | IPT | .0018 | .0027 | .0035 | .0041 | .0046 | .0054 | |
| 4 | 3 x D | 0.1 x D | 300 | – | 1080 | IPT | .0017 | .0025 | .0031 | .0036 | .0040 | .0046 | |
| 5 | 3 x D | 0.1 x D | 200 | – | 720 | IPT | .0015 | .0022 | .0028 | .0033 | .0037 | .0043 | |
| 6 | 3 x D | 0.1 x D | 170 | – | 540 | IPT | .0012 | .0018 | .0023 | .0027 | .0030 | .0034 | |
| M | 1 | 3 x D | 0.1 x D | 300 | – | 830 | IPT | .0018 | .0027 | .0035 | .0041 | .0046 | .0054 |
| 2 | 3 x D | 0.1 x D | 200 | – | 580 | IPT | .0015 | .0022 | .0028 | .0033 | .0037 | .0043 | |
| 3 | 3 x D | 0.1 x D | 200 | – | 510 | IPT | .0012 | .0018 | .0023 | .0027 | .0030 | .0034 | |
| K | 1 | 3 x D | 0.1 x D | 400 | – | 1080 | IPT | .0022 | .0033 | .0041 | .0047 | .0053 | .0059 |
| 2 | 3 x D | 0.1 x D | 370 | – | 1010 | IPT | .0018 | .0027 | .0035 | .0041 | .0046 | .0054 | |
| 3 | 3 x D | 0.1 x D | 370 | – | 940 | IPT | .0015 | .0022 | .0028 | .0033 | .0037 | .0043 | |
| S | 1 | 3 x D | 0.1 x D | 170 | – | 650 | IPT | .0018 | .0027 | .0035 | .0041 | .0046 | .0054 |
| 2 | 3 x D | 0.1 x D | 80 | – | 580 | IPT | .0015 | .0022 | .0028 | .0033 | .0037 | .0043 | |
| 3 | 3 x D | 0.1 x D | 80 | – | 290 | IPT | .0010 | .0015 | .0018 | .0022 | .0025 | .0029 | |
| 4 | 3 x D | 0.1 x D | 170 | – | 430 | IPT | .0013 | .0020 | .0026 | .0030 | .0034 | .0040 | |
| H | 1 | 3 x D | 0.1 x D | 270 | – | 1010 | IPT | .0017 | .0025 | .0031 | .0036 | .0040 | .0046 |
| 2 | 3 x D | 0.1 x D | 230 | – | 870 | IPT | .0012 | .0018 | .0023 | .0027 | .0030 | .0034 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO Katalog
ANSI Katalog
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Katalog | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?