Produkt ähnlich wie:
Round Inserts for Daisy KSRM™ • RCGT2006-LF
Wendeschneidplatten
Material Nummer5517479
ISO Katalog NummerRCGT190600ELFJANSI Katalog NummerRCGT64ELFJ
- P Stahl
- M Rostfreier Stahl
- S Hochwarmfeste Legierungen
- H Gehärtete Werkstoffe
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Material Nummer | 5517479 |
ISO Katalog Nummer | RCGT190600ELFJ |
ANSI Katalog Nummer | RCGT64ELFJ |
Sorte | KCSM30 |
[D] Wendeschneidplatten-Größe (Inkreis) | 19.05 mm |
[D] Wendeschneidplatten-Größe (Inkreis) | .75 in |
[S] Dicke der Wendeschneidplatte | 6.35 mm |
[S] Dicke der Wendeschneidplatte | .25 in |
Mittlere Spandicke [HM] | 0.051 mm |
Mittlere Spandicke [HM] | .002 in |
Wendeschneidplatte Anzahl der Schneidkanten | 6 |
Werkstoffe
- Stahl
- Rostfreier Stahl
- Hochwarmfeste Legierungen
- Gehärtete Werkstoffe
Features and benefits
- Die -ELF-Geometrie ist die erste Wahl, wenn niedrige Schnittkräfte benötigt werden, um Aufbauschneiden zu verhindern.
- SGF ist geeignet für allgemeine Schruppbearbeitungen.
- SJF ist die erste Wahl für schwere Schruppbearbeitungen.
Lösung erstellen, um Vorschübe und Geschwindigkeiten zu berechnen
Nachdem Sie eine Lösung erstellt haben, wählen Sie einfach das Symbol für Vorschübe und Geschwindigkeiten und unser System gibt Ihnen Empfehlungen. Sie können die Informationen anpassen, indem Sie Ihre Maschine und Spezifikationen hinzufügen oder Anpassungen mithilfe der Schieberegler vornehmen.
Insert Selection
Material Group | Light | General | Heavy | |||
– | (Light geometry) | – | (Strong geometry) | |||
– | wear | toughness | ||||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | .E..LF | KC725M | .S..GFJ | KCPM40 | .S..HFJ | KCPM40 |
P3–P4 | .E..LF | KC725M | .S..GFJ | KCPM40 | .S..HFJ | KCPM40 |
P5–P6 | .E..LF | KC725M | .S..GF | KC725M | .S..HF | KC725M |
M1–M2 | .E..LF | KCSM40 | .S..GF | KC522M | .S..HF | KCSM40 |
M3 | .E..LF | KCSM40 | .S..GFJ | KCPM40 | .S..HF | KCSM40 |
K1–K2 | – | – | – | – | – | – |
K3 | .S..HF | KCPK30 | .S..HF | KCPK30 | .S..HF | KCPK30 |
N1–N2 | – | – | – | – | – | – |
N3 | – | – | – | – | – | – |
S1–S2 | .E..LF | KCSM40 | .S..GF | KC725M | .S..HF | KCSM40 |
S3 | .E..LF | KCSM40 | .S..GFJ | KCPM40 | .S..HF | KCSM40 |
S4 | .E..LF | KCSM40 | .S..GF | KC522M | .S..HF | KCSM40 |
H1 | – | – | – | – | – | – |
Feeds
Bei einer axialen Schnitttiefe von 10,00 (ap)
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
.E..LFJ | 0,12 | 0,44 | 0,87 | 0,09 | 0,32 | 0,62 | 0,07 | 0,24 | 0,47 | 0,06 | 0,21 | 0,41 | 0,05 | 0,19 | 0,37 | .E..LFJ |
.E..LF | 0,12 | 0,44 | 0,87 | 0,09 | 0,32 | 0,62 | 0,07 | 0,24 | 0,47 | 0,06 | 0,21 | 0,41 | 0,05 | 0,19 | 0,37 | .E..LF |
.S..GFJ | 0,23 | 0,52 | 0,93 | 0,17 | 0,38 | 0,67 | 0,13 | 0,28 | 0,50 | 0,11 | 0,24 | 0,43 | 0,10 | 0,22 | 0,40 | .S..GFJ |
.S..GF | 0,23 | 0,52 | 0,93 | 0,17 | 0,38 | 0,67 | 0,13 | 0,28 | 0,50 | 0,11 | 0,24 | 0,43 | 0,10 | 0,22 | 0,40 | .S..GF |
.S..HFJ | 0,23 | 0,59 | 1,01 | 0,17 | 0,42 | 0,72 | 0,13 | 0,32 | 0,54 | 0,11 | 0,28 | 0,47 | 0,10 | 0,25 | 0,43 | .S..HFJ |
.S..HF | 0,23 | 0,59 | 1,01 | 0,17 | 0,42 | 0,72 | 0,13 | 0,32 | 0,54 | 0,11 | 0,28 | 0,47 | 0,10 | 0,25 | 0,43 | .S..HF |
Bei einer axialen Schnitttiefe von 3,80 (ap)
Light | General | Heavy |
Bei einer axialen Schnitttiefe von 2,00 (ap)
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
.E..LFJ | 0,16 | 0,56 | 1,11 | 0,11 | 0,40 | 0,80 | 0,09 | 0,30 | 0,59 | 0,07 | 0,26 | 0,52 | 0,07 | 0,24 | 0,47 | .E..LFJ |
.E..LF | 0,16 | 0,56 | 1,11 | 0,11 | 0,40 | 0,80 | 0,09 | 0,30 | 0,59 | 0,07 | 0,26 | 0,52 | 0,07 | 0,24 | 0,47 | .E..LF |
.S..GFJ | 0,30 | 0,66 | 1,18 | 0,22 | 0,48 | 0,85 | 0,16 | 0,36 | 0,64 | 0,14 | 0,31 | 0,55 | 0,13 | 0,29 | 0,51 | .S..GFJ |
.S..GF | 0,30 | 0,66 | 1,18 | 0,22 | 0,48 | 0,85 | 0,16 | 0,36 | 0,64 | 0,14 | 0,31 | 0,55 | 0,13 | 0,29 | 0,51 | .S..GF |
.S..HFJ | 0,30 | 0,75 | 1,29 | 0,22 | 0,54 | 0,92 | 0,16 | 0,41 | 0,69 | 0,14 | 0,35 | 0,60 | 0,13 | 0,32 | 0,55 | .S..HFJ |
.S..HF | 0,30 | 0,75 | 1,29 | 0,22 | 0,54 | 0,92 | 0,16 | 0,41 | 0,69 | 0,14 | 0,35 | 0,60 | 0,13 | 0,32 | 0,55 | .S..HF |
Bei einer axialen Schnitttiefe von 1,30 (ap)
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
.E..LFJ | 0,25 | 0,90 | 1,78 | 0,18 | 0,65 | 1,27 | 0,14 | 0,48 | 0,95 | 0,12 | 0,42 | 0,83 | 0,11 | 0,39 | 0,76 | .E..LFJ |
.E..LF | 0,25 | 0,90 | 1,78 | 0,18 | 0,65 | 1,27 | 0,14 | 0,48 | 0,95 | 0,12 | 0,42 | 0,83 | 0,11 | 0,39 | 0,76 | .E..LF |
.S..GFJ | 0,48 | 1,06 | 1,90 | 0,34 | 0,76 | 1,36 | 0,26 | 0,57 | 1,01 | 0,22 | 0,50 | 0,88 | 0,21 | 0,46 | 0,81 | .S..GFJ |
.S..GF | 0,48 | 1,06 | 1,90 | 0,34 | 0,76 | 1,36 | 0,26 | 0,57 | 1,01 | 0,22 | 0,50 | 0,88 | 0,21 | 0,46 | 0,81 | .S..GF |
.S..HFJ | 0,48 | 1,20 | 2,07 | 0,34 | 0,86 | 1,48 | 0,26 | 0,65 | 1,10 | 0,22 | 0,56 | 0,96 | 0,21 | 0,52 | 0,88 | .S..HFJ |
.S..HF | 0,48 | 1,20 | 2,07 | 0,34 | 0,86 | 1,48 | 0,26 | 0,65 | 1,10 | 0,22 | 0,56 | 0,96 | 0,21 | 0,52 | 0,88 | .S..HF |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
.E..LFJ | 0,21 | 0,73 | 1,46 | 0,15 | 0,53 | 1,04 | 0,11 | 0,40 | 0,78 | 0,10 | 0,35 | 0,68 | 0,09 | 0,32 | 0,62 | .E..LFJ |
.E..LF | 0,21 | 0,73 | 1,46 | 0,15 | 0,53 | 1,04 | 0,11 | 0,40 | 0,78 | 0,10 | 0,35 | 0,68 | 0,09 | 0,32 | 0,62 | .E..LF |
.S..GFJ | 0,39 | 0,87 | 1,56 | 0,28 | 0,63 | 1,12 | 0,21 | 0,47 | 0,83 | 0,18 | 0,41 | 0,72 | 0,17 | 0,37 | 0,66 | .S..GFJ |
.S..GF | 0,39 | 0,87 | 1,56 | 0,28 | 0,63 | 1,12 | 0,21 | 0,47 | 0,83 | 0,18 | 0,41 | 0,72 | 0,17 | 0,37 | 0,66 | .S..GF |
.S..HFJ | 0,39 | 0,99 | 1,69 | 0,28 | 0,71 | 1,21 | 0,21 | 0,53 | 0,90 | 0,18 | 0,46 | 0,79 | 0,17 | 0,42 | 0,72 | .S..HFJ |
.S..HF | 0,39 | 0,99 | 1,69 | 0,28 | 0,71 | 1,21 | 0,21 | 0,53 | 0,90 | 0,18 | 0,46 | 0,79 | 0,17 | 0,42 | 0,72 | .S..HF |
At .394 Axial Depth of Cut (ap)
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LF | .004 | .007 | .013 | .003 | .005 | .009 | .002 | .004 | .008 | .002 | .004 | .008 | .002 | .004 | .008 | .E..LF |
.S..GF | .007 | .017 | .028 | .005 | .013 | .020 | .004 | .011 | .018 | .004 | .010 | .016 | .004 | .010 | .016 | .S..GF |
.S..HF | .007 | .017 | .028 | .005 | .013 | .020 | .004 | .011 | .018 | .004 | .010 | .016 | .004 | .010 | .016 | .S..HF |
At .197 Axial Depth of Cut (ap)
Light | General | Heavy |
At .098 Axial Depth of Cut (ap)
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LF | .004 | .008 | .015 | .003 | .006 | .011 | .003 | .005 | .009 | .003 | .005 | .009 | .002 | .005 | .009 | .E..LF |
.S..GF | .008 | .020 | .032 | .006 | .015 | .023 | .005 | .013 | .020 | .005 | .012 | .019 | .005 | .012 | .018 | .S..GF |
.S..HF | .008 | .020 | .032 | .006 | .015 | .023 | .005 | .013 | .020 | .005 | .012 | .019 | .005 | .012 | .018 | .S..HF |
At .049 Axial Depth of Cut (ap)
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | Geometry | |||||||||||
.E..LF | .007 | .014 | .027 | .005 | .011 | .020 | .005 | .009 | .017 | .004 | .009 | .016 | .004 | .008 | .015 | .E..LF |
.S..GF | .014 | .036 | .059 | .010 | .026 | .042 | .009 | .023 | .036 | .008 | .021 | .034 | .008 | .021 | .033 | .S..GF |
.S..HF | .014 | .036 | .059 | .010 | .026 | .042 | .009 | .023 | .036 | .008 | .021 | .034 | .008 | .021 | .033 | .S..HF |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LF | .005 | .010 | .019 | .004 | .008 | .014 | .004 | .007 | .012 | .003 | .006 | .012 | .003 | .006 | .011 | .E..LF |
.S..GF | .010 | .026 | .042 | .008 | .019 | .031 | .007 | .017 | .027 | .006 | .015 | .025 | .006 | .015 | .024 | .S..GF |
.S..HF | .010 | .026 | .042 | .008 | .019 | .031 | .007 | .017 | .027 | .006 | .015 | .025 | .006 | .015 | .024 | .S..HF |
Speeds
Empfohlene Startwerte für Schnittgeschwindigkeit [m/min]
Material Group | KC522M | KC725M | KCPK30 | |||||||
P | 1 | 395 | 345 | 325 | 315 | 275 | 255 | 545 | 475 | 440 |
2 | 330 | 290 | 240 | 260 | 230 | 195 | 335 | 305 | 275 | |
3 | 305 | 255 | 215 | 240 | 205 | 170 | 305 | 275 | 250 | |
4 | 270 | 225 | 180 | 215 | 180 | 145 | 225 | 210 | 190 | |
5 | 225 | 200 | 180 | 180 | 160 | 145 | 310 | 275 | 255 | |
6 | 200 | 150 | 120 | 160 | 120 | 95 | 190 | 165 | – | |
M | 1 | 245 | 215 | 200 | 205 | 180 | 165 | 250 | 220 | 190 |
2 | 225 | 190 | 160 | 185 | 160 | 130 | 225 | 195 | 170 | |
3 | 170 | 145 | 115 | 140 | 120 | 95 | 175 | 160 | 140 | |
K | 1 | – | – | – | – | – | – | 355 | 320 | 285 |
2 | – | – | – | – | – | – | 280 | 255 | 230 | |
3 | – | – | – | – | – | – | 235 | 210 | 195 | |
N | 1–2 | – | – | – | – | – | – | – | – | – |
3 | – | – | – | – | – | – | – | – | – | |
S | 1 | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – |
2 | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | |
3 | 60 | 50 | 35 | 55 | 45 | 30 | – | – | – | |
4 | 85 | 60 | 45 | 75 | 55 | 35 | – | – | – | |
H | 1 | – | – | – | – | – | – | – | – | – |
Recommended Starting Speeds [SFM]
Material Group | KC522M | KC725M | KCPK30 | |||||||
P | 1 | 1300 | 1130 | 1060 | 1030 | 900 | 840 | 1780 | 1560 | 1450 |
2 | 1080 | 950 | 790 | 860 | 760 | 640 | 1100 | 1000 | 900 | |
3 | 1000 | 840 | 700 | 790 | 670 | 550 | 1000 | 900 | 820 | |
4 | 890 | 730 | 590 | 710 | 590 | 470 | 740 | 690 | 620 | |
5 | 730 | 660 | 590 | 590 | 530 | 470 | 1020 | 910 | 830 | |
6 | 650 | 490 | 400 | 520 | 400 | 310 | 620 | 540 | – | |
M | 1 | 800 | 710 | 650 | 670 | 590 | 540 | 820 | 720 | 620 |
2 | 730 | 620 | 520 | 610 | 520 | 430 | 730 | 640 | 550 | |
3 | 550 | 480 | 370 | 460 | 400 | 310 | 570 | 520 | 460 | |
K | 1 | 900 | 820 | 720 | – | – | – | 1160 | 1050 | 940 |
2 | 710 | 640 | 590 | – | – | – | 920 | 830 | 760 | |
3 | 590 | 530 | 480 | – | – | – | 770 | 690 | 640 | |
N | 1–2 | – | – | – | – | – | – | – | – | – |
3 | – | – | – | – | – | – | – | – | – | |
S | 1 | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – |
2 | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | |
3 | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | |
4 | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | |
H | 1 | – | – | – | – | – | – | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use