Downloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 2455819 |
| ISO Catalog ID | OFKT06L5AFENGB |
| ANSI Catalog ID | OFKT53AFEN4GB |
| Grade | KCPK30 |
| [D] Insert IC Size | 14.7 mm |
| [D] Insert IC Size | .5787 in |
| [S] Insert Thickness | 5 mm |
| [S] Insert Thickness | .1969 in |
| [L10] Insert Cutting Edge Length | 6 mm |
| [L10] Insert Cutting Edge Length | .236 in |
| [Rε] Corner Radius | 0.8 mm |
| [Rε] Corner Radius | .0312 in |
| Average Chip Thickness [HM] | 0.15 mm |
| Average Chip Thickness [HM] | .0059 in |
| Cutting Edges per Insert | 8 |
Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
| Material Group | Light | General | Heavy | |||
| – | (Light geometry) | (Strong geometry) | ||||
| – | wear |  | toughness | |||
| – | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .E..NLB | KC725M | .E..NGB | KC725M | .S..NHB | KC725M |
| P3–P4 | .E..NLB | KCPK30 | .E..NGB | KCPK30 | .S..NHB | KCPK30 |
| P5–P6 | .E..NLB | KCPK30 | .E..NLB | KCPK30 | .E..NGB | KCPK30 |
| M1–M2 | .E..NLB | KC725M | .E..NGB | KC725M | .S..NHB | KC725M |
| M3 | .E..NLB | KCPK30 | .E..NLB | KCPK30 | .S..NLB | KC522M |
| K1–K2 | — | — | .S..NHB | KCPM20 | .S..NHB | KCPK30 |
| K3 | .E..NLB | KCPK30 | .E..NGB | KCPK30 | .S..NHB | KCPK30 |
| N1–N2 | — | — | — | — | — | — |
| N3 | — | — | — | — | — | — |
| S1–S2 | .E..NLB | KC725M | .E..NGB | KC725M | .S..NHB | KC725M |
| S3 | .E..NLB | KC725M | .E..NGB | KC725M | .S..NHB | KC725M |
| S4 | .E..NGB | KC725M | .S..NHB | KC725M | — | — |
| H1 | — | — | — | — | — | — |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..NLB | 0,25 | 0,37 | 0,43 | 0,18 | 0,28 | 0,32 | 0,16 | 0,24 | 0,28 | 0,15 | 0,22 | 0,26 | 0,15 | 0,22 | 0,26 | .E..NLB |
| .S..NLB | 0,57 | 0,69 | 0,79 | 0,42 | 0,51 | 0,59 | 0,37 | 0,45 | 0,52 | 0,34 | 0,42 | 0,48 | 0,34 | 0,41 | 0,47 | .S..NLB |
| .E..NGB | 0,52 | 0,55 | 0,65 | 0,39 | 0,41 | 0,48 | 0,34 | 0,36 | 0,42 | 0,32 | 0,34 | 0,39 | 0,31 | 0,33 | 0,38 | .E..NGB |
| .S..NHB | 0,57 | 0,78 | 0,91 | 0,42 | 0,58 | 0,68 | 0,37 | 0,5 | 0,59 | 0,34 | 0,47 | 0,55 | 0,34 | 0,46 | 0,54 | .S..NHB |
| Light | General | Heavy |
| Material Group | KCK15 | KC520M | KCPM20 | KC522M | KC725M | KCPK30 | |||||||||||||
| P | 1 | – | – | – | – | – | – | 660 | 580 | 535 | 395 | 345 | 325 | 315 | 275 | 255 | 545 | 475 | 440 |
| 2 | – | – | – | – | – | – | 410 | 370 | 330 | 330 | 290 | 240 | 260 | 230 | 195 | 335 | 305 | 275 | |
| 3 | – | – | – | – | – | – | 370 | 330 | 305 | 305 | 255 | 215 | 240 | 205 | 170 | 305 | 275 | 250 | |
| 4 | – | – | – | – | – | – | 275 | 255 | 230 | 270 | 225 | 180 | 215 | 180 | 145 | 225 | 210 | 190 | |
| 5 | – | – | – | – | – | – | 330 | 300 | 275 | 225 | 200 | 180 | 180 | 160 | 145 | 310 | 275 | 255 | |
| 6 | – | – | – | – | – | – | 230 | 200 | 175 | 200 | 150 | 120 | 160 | 120 | 95 | 190 | 165 | – | |
| M | 1 | – | – | – | – | – | – | 270 | 240 | 205 | 245 | 215 | 200 | 205 | 180 | 165 | 250 | 220 | 190 |
| 2 | – | – | – | – | – | – | 245 | 215 | 190 | 225 | 190 | 160 | 185 | 160 | 130 | 225 | 195 | 170 | |
| 3 | – | – | – | – | – | – | 195 | 175 | 150 | 170 | 145 | 115 | 140 | 120 | 95 | 175 | 160 | 140 | |
| K | 1 | 505 | 460 | 410 | 325 | 295 | 260 | 435 | 390 | 350 | 275 | 250 | 220 | – | – | – | – | – | – |
| 2 | 400 | 355 | 330 | 255 | 225 | 215 | 345 | 310 | 280 | 215 | 195 | 180 | – | – | – | – | – | – | |
| 3 | 335 | 300 | 275 | 215 | 190 | 170 | 290 | 255 | 240 | 180 | 160 | 145 | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | 45 | 35 | 30 |
| 2 | – | – | – | – | – | – | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | 45 | 35 | 30 | |
| 3 | – | – | – | – | – | – | – | – | – | 60 | 50 | 35 | 55 | 45 | 30 | 55 | 45 | 30 | |
| 4 | – | – | – | – | – | – | – | – | – | 85 | 60 | 45 | 75 | 55 | 35 | 75 | 55 | 35 | |
| H | 1 | – | – | – | – | – | – | 170 | 140 | 115 | 145 | 110 | 85 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| max DOC Ap | mm | chipload (fz) |
| AP1 Max | 3,5 | 1 x fz |
| AP2 Max | 9,0 | 0,6 x fz |
| D1 mm | D1 max mm | max ap mm | ramping angle (°) | ramping length mm |
| 32 | 41,1 | 9 | 11,0 | 46,3 |
| 40 | 49,0 | 9 | 7,5 | 68,4 |
| 50 | 58,9 | 9 | 5,0 | 102,9 |
| 63 | 71,8 | 9 | 3,9 | 132,0 |
| 80 | 88,7 | 9 | 2,9 | 177,7 |
| max plunging depth | mm |
| AP1 max | 3,2 |
| hole diameter | ||||
| D1 mm | D1 max mm | min mm | max mm | Ap/rev mm |
| 32 | 41,1 | 61,7 | 81,7 | 4,7 |
| 40 | 49,0 | 77,5 | 97,6 | 4,7 |
| 50 | 58,9 | 97,4 | 117,4 | 4,7 |
| 63 | 71,8 | 123,3 | 143,3 | 4,7 |
| 80 | 88,7 | 157,2 | 177,2 | 4,7 |
I have read and accepted the Terms & Conditions of use
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
