Bienvenue
Veuillez confirmer vos préférences
Mettre à jour les préférences

Suggestions de produit

Product Family suggestions

Kennametal à votre service

Support Clients

Trouver les coordonnées des supports clients dans le monde

Commande rapide
Article(s) ajoutées avec succès au panier
Voir le panier
Usinez plus pour moins cher avec nos promotions! Achetez maintenant

Kennametal à votre service

Support Clients

Trouver les coordonnées des supports clients dans le monde

Article(s) ajoutées avec succès au panier
Voir le panier
Exit Search Retour à la Solution

Édition de la Solution

Ajout de Solution

Nom de la Solution:{{SolutionName}}

    Produit similaire à:

    Retour | Modifier similaire à

    DFR KM40TS Shank • KM50TS Shank • 3 x D • Inch

    Corps d'outils Drill-Fix DFR

    Numéro de matériel100003976

    DFR KM40TS Shank • KM50TS Shank • 3 x D • Inch
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Inch
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Inch
    Open expanded view
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Inch
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Inch
    Représentation Générique
    Contactez notre équipe commerciale pour découvrir toutes vos options tarifaires

    Features and benefits

    • Drill Fix DFR with rectangular-shaped inserts offer highest stability and feed rates at smaller sizes.
    • X-offset design to adjust diameter size on turning machines and optimize tolerances on machining centers.
    • Benefit from the KM-TS™ coupling as most precise and most stable tooling system allowing fully automated tool changing.
    • Drill shipped with insert screws, side pipe plug, and Torx wrench.
    • PerçagePerçage
    • Perçage : Entrée inclinéePerçage : Entrée inclinée
    • Perçage : Sortie inclinéePerçage : Sortie inclinée
    • Perçage : Trou excentréPerçage : Trou excentré
    • Perçage : ConvexePerçage : Convexe
    • Queue KMQueue KM
    • Arrosage interne : Radial : Perçage indexable Arrosage interne : Radial : Perçage indexable
    • Perçage : trou borgnePerçage : trou borgne
    • Chain DrillingChain Drilling
    • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
    • Drilling: Half-Cylindrical DrillingDrilling: Half-Cylindrical Drilling
    • Drilling: Corner Drilling 45°Drilling: Corner Drilling 45°

    ATTENTION • Drill Fix DFR

    ATTENTION En perçage débouchant, une rondelle (ou débouchure) se forme au moment où l’outil débouche de la pièce. Lorsque le foret est fixe et que la pièce tourne, la rondelle risque d’être éjectée du mandrin sous l’effet de la force centrifuge. Prévoir une protection pour les personnes se trouvant à proximité.

    Dimensions • DFR Flanged Shank

    DLS
    2050
    Pouces
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage SFM
    MiniValeur initialeMaxiØDFR02... .500–.625"DFR03... .688–.750"DFR04... .813–1.00"
    P1SOMDKCU25101710661181SFM.004–.006.004–.007.006–.010
    IMDKC7140
    UOMDKCU40656705754SFM.004–.006.004–.007.006–.010
    IMDKC7140
    IOMDKC7140426443492SFM.004–.006.004–.007.006–.010
    IMDKC7140
    2SOGDKCPK10101710661181SFM.004–.006.004–.007.006–.010
    ILDKC7140
    UOGDKCU40656705754SFM.004–.006.004–.007.006–.010
    ILDKC7140
    IOMDKC7140426443492SFM.004–.006.004–.007.006–.010
    ILDKC7140
    3SOGDKCPK108539351050SFM.004–.006.004–.007.006–.010
    ILDKC7140
    UOGDKCU40590640722SFM.004–.006.004–.007.006–.010
    ILDKC7140
    IOGDKC7140361394459SFM.004–.006.004–.007.006–.010
    ILDKC7140
    4SOGDKCU25722820984SFM.004–.006.004–.007.006–.010
    ILDKC7140
    UOGDKCU40492590722SFM.004–.006.004–.007.006–.010
    ILDKC7140
    IOGDKC7140295361459SFM.004–.006.004–.007.006–.010
    ILDKC7140
    5SOGDKCU25590656722SFM.003–.005.004–.006.004–.007
    ILDKC7140
    UOGDKCU40394443492SFM.003–.005.004–.006.004–.007
    ILDKC7140
    IOGDKC7140230279328SFM.003–.005.004–.006.004–.007
    ILDKC7140
    6SOGDKCU25590656722SFM.004–.006.004–.007.006–.010
    ILDKC7140
    UOGDKCU40394443492SFM.004–.006.004–.007.006–.010
    ILDKC7140
    IOGDKC7140230279328SFM.004–.006.004–.007.006–.010
    ILDKC7140
    Pouces
    Vitesse de coupe vc
    Plage SFMPlage des avances (fz) par diamètre
    Groupe MatièresConditionLogementGéométrieNuanceMiniValeur initialeMaxi Ø DFR02... .500"–.625"DFR03... .688"–.750"DFR04... .813"–1.00"
    P1SOMDKCU25101710661181SFM.004–.006.004–.007.006–.010
    1SIMDKC7140101710661181SFM.004–.006.004–.007.006–.010
    1UOMDKCU40656705754SFM.004–.006.004–.007.006–.010
    1UIMDKC7140656705754SFM.004–.006.004–.007.006–.010
    1IOMDKC7140426443492SFM.004–.006.004–.007.006–.010
    1IIMDKC7140426443492SFM.004–.006.004–.007.006–.010
    2SOGDKCPK10101710661181SFM.004–.006.004–.007.006–.010
    2SILDKC7140101710661181SFM.004–.006.004–.007.006–.010
    2UOGDKCU40656705754SFM.004–.006.004–.007.006–.010
    2UILDKC7140656705754SFM.004–.006.004–.007.006–.010
    2IOMDKC7140426443492SFM.004–.006.004–.007.006–.010
    2IILDKC7140426443492SFM.004–.006.004–.007.006–.010
    3SOGDKCPK108539351050SFM.004–.006.004–.007.006–.010
    3SILDKC71408539351050SFM.004–.006.004–.007.006–.010
    3UOGDKCU40590640722SFM.004–.006.004–.007.006–.010
    3UILDKC7140590640722SFM.004–.006.004–.007.006–.010
    3IOGDKC7140361394459SFM.004–.006.004–.007.006–.010
    3IILDKC7140361394459SFM.004–.006.004–.007.006–.010
    4SOGDKCU25722820984SFM.004–.006.004–.007.006–.010
    4SILDKC7140722820984SFM.004–.006.004–.007.006–.010
    4UOGDKCU40492590722SFM.004–.006.004–.007.006–.010
    4UILDKC7140492590722SFM.004–.006.004–.007.006–.010
    4IOGDKC7140295361459SFM.004–.006.004–.007.006–.010
    4IILDKC7140295361459SFM.004–.006.004–.007.006–.010
    5SOGDKCU25590656722SFM.003–.005.004–.006.004–.007
    5SILDKC7140590656722SFM.003–.005.004–.006.004–.007
    5UOGDKCU40394443492SFM.003–.005.004–.006.004–.007
    5UILDKC7140394443492SFM.003–.005.004–.006.004–.007
    5IOGDKC7140230279328SFM.003–.005.004–.006.004–.007
    5IILDKC7140230279328SFM.003–.005.004–.006.004–.007
    6SOGDKCU25590656722SFM.004–.006.004–.007.006–.010
    6SILDKC7140590656722SFM.004–.006.004–.007.006–.010
    6UOGDKCU40394443492SFM.004–.006.004–.007.006–.010
    6UILDKC7140394443492SFM.004–.006.004–.007.006–.010
    6IOGDKC7140230279328SFM.004–.006.004–.007.006–.010
    6IILDKC7140230279328SFM.004–.006.004–.007.006–.010
    Pouces
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage SFM
    MiniValeur initialeMaxiØDFR02... .500–.625"DFR03... .688–.750"DFR04... .813–1.00"
    M1SOMDKC7140492623754SFM.003–.005.003–.006.004–.007
    IMDKC7140
    UOMDKC7140328426525SFM.003–.005.003–.006.004–.007
    IMDKC7140
    IOMDKC7140197262328SFM.003–.005.003–.006.004–.007
    IMDKC7140
    2SOMDKC7140492590689SFM.003–.005.003–.006.004–.007
    IMDKC7140
    UOMDKC7140328426525SFM.003–.005.003–.006.004–.007
    IMDKC7140
    IOMDKC7140197262328SFM.003–.005.003–.006.004–.007
    IMDKC7140
    3SOMDKC7140328426525SFM.003–.005.003–.006.004–.007
    IMDKC7140
    UOMDKC7140262361459SFM.003–.005.003–.006.004–.007
    IMDKC7140
    IOMDKC7140164230295SFM.003–.005.003–.006.004–.007
    IMDKC7140
    Pouces
    Vitesse de coupe vc
    Plage SFMPlage des avances (fz) par diamètre
    Groupe MatièresConditionLogementGéométrieNuanceMiniValeur initialeMaxi Ø DFR02... .500"–.625"DFR03... .688"–.750"DFR04... .813"–1.00"
    M1SOMDKC7140492623754SFM.003–.005.003–.006.004–.007
    1SIMDKC7140492623754SFM.003–.005.003–.006.004–.007
    1UOMDKC7140328426525SFM.003–.005.003–.006.004–.007
    1UIMDKC7140328426525SFM.003–.005.003–.006.004–.007
    1IOMDKC7140197262328SFM.003–.005.003–.006.004–.007
    1IIMDKC7140197262328SFM.003–.005.003–.006.004–.007
    2SOMDKC7140492590689SFM.003–.005.003–.006.004–.007
    2SIMDKC7140492590689SFM.003–.005.003–.006.004–.007
    2UOMDKC7140328426525SFM.003–.005.003–.006.004–.007
    2UIMDKC7140328426525SFM.003–.005.003–.006.004–.007
    2IOMDKC7140197262328SFM.003–.005.003–.006.004–.007
    2IIMDKC7140197262328SFM.003–.005.003–.006.004–.007
    3SOMDKC7140328426525SFM.003–.005.003–.006.004–.007
    3SIMDKC7140328426525SFM.003–.005.003–.006.004–.007
    3UOMDKC7140262361459SFM.003–.005.003–.006.004–.007
    3UIMDKC7140262361459SFM.003–.005.003–.006.004–.007
    3IOMDKC7140164230295SFM.003–.005.003–.006.004–.007
    3IIMDKC7140164230295SFM.003–.005.003–.006.004–.007
    Pouces
    Groupe MatièresLogementLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage SFM
    MiniValeur initialeMaxiØDFR02... .500–.625"DFR03... .688–.750"DFR04... .813–1.00"
    K1SOGDKCPK10656787984SFM.004–.007.005–.008.006–.009
    ILDKCU40
    UOGDKCU25394508656SFM.004–.007.005–.008.006–.009
    ILDKC7140
    IOGDKCU40262328410SFM.004–.007.005–.008.005–.009
    ILDKC7140
    2SOGDKCPK10590722853SFM.004–.007.005–.008.006–.009
    ILDKCU40
    UOGDKCU25361459558SFM.004–.007.005–.008.005–.009
    ILDKC7140
    IOGDKCU40262328394SFM.004–.007.005–.008.006–.009
    ILDKC7140
    3SOGDKCPK10590722853SFM.004–.007.005–.008.005–.009
    ILDKCU40
    UOGDKCU25361459558SFM.004–.007.005–.008.006–.009
    ILDKC7140
    IOGDKCU40262328394SFM.004–.007.005–.008.005–.009
    ILDKC7140
    Pouces
    Vitesse de coupe vc
    Plage SFMPlage des avances (fz) par diamètre
    Groupe MatièresConditionLogementGéométrieNuanceMiniValeur initialeMaxi Ø DFR02... .500"–.625"DFR03... .688"–.750"DFR04... .813"–1.00"
    K1SOGDKCPK10656787984SFM.004–.007.005–.008.006–.009
    1SILDKCU40656787984SFM.004–.007.005–.008.006–.009
    1UOGDKCU25394508656SFM.004–.007.005–.008.006–.009
    1UILDKC7140394508656SFM.004–.007.005–.008.006–.009
    1IOGDKCU40262328410SFM.004–.007.005–.008.005–.009
    1IILDKC7140262328410SFM.004–.007.005–.008.005–.009
    2SOGDKCPK10590722853SFM.004–.007.005–.008.006–.009
    2SILDKCU40590722853SFM.004–.007.005–.008.006–.009
    2UOGDKCU25361459558SFM.004–.007.005–.008.005–.009
    2UILDKC7140361459558SFM.004–.007.005–.008.005–.009
    2IOGDKCU40262328394SFM.004–.007.005–.008.006–.009
    2IILDKC7140262328394SFM.004–.007.005–.008.006–.009
    3SOGDKCPK10590722853SFM.004–.007.005–.008.005–.009
    3SILDKCU40590722853SFM.004–.007.005–.008.005–.009
    3UOGDKCU25361459558SFM.004–.007.005–.008.006–.009
    3UILDKC7140361459558SFM.004–.007.005–.008.006–.009
    3IOGDKCU40262328394SFM.004–.007.005–.008.005–.009
    3IILDKC7140262328394SFM.004–.007.005–.008.005–.009
    Pouces
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage SFM
    MiniValeur initialeMaxiØDFR02... .500"–.625"DFR03... .688"–.750"DFR04... .813"–1.00"
    N1SOSTKD1425131219682624SFM.003–.004.004–.006.005–.006
    ISTKD1425
    UOLDKCU4098413121640SFM.003–.004.004–.006.005–.006
    ILDKCU40
    IOLDKCU406569841312SFM.003–.004.004–.006.005–.006
    ILDKCU40
    2SOSTKD1425123018042542SFM.003–.004.004–.006.005–.006
    ISTKD1425
    UOLDKCU4082011481476SFM.003–.004.004–.006.005–.006
    ILDKCU40
    IOLDKCU405748201066SFM.003–.004.004–.006.005–.006
    ILDKCU40
    3SOSTKD1425114816402132SFM.003–.004.004–.006.005–.006
    ISTKD1425
    UOLDKCU4082011481476SFM.003–.004.004–.006.005–.006
    ILDKCU40
    IOLDKCU404928201148SFM.003–.004.004–.006.005–.006
    ILDKCU40
    4SOSTKD1425131219682624SFM.003–.004.004–.006.005–.006
    ISTKD1425
    UOLDKCU4082011481486SFM.003–.004.004–.006.005–.006
    ILDKCU40
    IOLDKCU406569841312SFM.003–.004.004–.006.005–.006
    ILDKCU40
    5SOHPKD1425131219682624SFM.003–.004.004–.006.005–.006
    IHPKD1425
    UOHPKCU4082011481476SFM.003–.004.004–.006.005–.006
    IHPKCU40
    IOHPKCU406569841312SFM.003–.004.004–.006.005–.006
    IHPKCU40
    6SOSTKD1425131219682624SFM.003–.004.004–.006.005–.006
    ISTKD1425
    UOGDKCU4082011481476SFM.003–.004.004–.006.005–.006
    IGDKCU40
    IOGDKMF6569841312SFM.003–.004.004–.006.005–.006
    IGDKMF
    Pouces
    Vitesse de coupe vc
    Plage SFMPlage des avances (fz) par diamètre
    Groupe MatièresConditionLogementGéométrieNuanceMiniValeur initialeMaxiØDFR02... .500"–.625"DFR03... .688"–.750"DFR04... .813"–1.00"
    N1SOSTKD1425131219682624SFM.003–.004.004–.006.005–.006
    1SISTKD1425131219682624SFM.003–.004.004–.006.005–.006
    1UOLDKCU4098413121640SFM.003–.004.004–.006.005–.006
    1UILDKCU4098413121640SFM.003–.004.004–.006.005–.006
    1IOLDKCU406569841312SFM.003–.004.004–.006.005–.006
    1IILDKCU406569841312SFM.003–.004.004–.006.005–.006
    2SOSTKD1425123018042542SFM.003–.004.004–.006.005–.006
    2SISTKD1425123018042542SFM.003–.004.004–.006.005–.006
    2UOLDKCU4082011481476SFM.003–.004.004–.006.005–.006
    2UILDKCU4082011481476SFM.003–.004.004–.006.005–.006
    2IOLDKCU405748201066SFM.003–.004.004–.006.005–.006
    2IILDKCU405748201066SFM.003–.004.004–.006.005–.006
    3SOSTKD1425114816402132SFM.003–.004.004–.006.005–.006
    3SISTKD1425114816402132SFM.003–.004.004–.006.005–.006
    3UOLDKCU4082011481476SFM.003–.004.004–.006.005–.006
    3UILDKCU4082011481476SFM.003–.004.004–.006.005–.006
    3IOLDKCU404928201148SFM.003–.004.004–.006.005–.006
    3IILDKCU404928201148SFM.003–.004.004–.006.005–.006
    4SOSTKD1425131219682624SFM.003–.004.004–.006.005–.006
    4SISTKD1425131219682624SFM.003–.004.004–.006.005–.006
    4UOLDKCU4082011481486SFM.003–.004.004–.006.005–.006
    4UILDKCU4082011481486SFM.003–.004.004–.006.005–.006
    4IOLDKCU406569841312SFM.003–.004.004–.006.005–.006
    4IILDKCU406569841312SFM.003–.004.004–.006.005–.006
    5SOHPKD1425131219682624SFM.003–.004.004–.006.005–.006
    5SIHPKD1425131219682624SFM.003–.004.004–.006.005–.006
    5UOHPKCU4082011481476SFM.003–.004.004–.006.005–.006
    5UIHPKCU4082011481476SFM.003–.004.004–.006.005–.006
    5IOHPKCU406569841312SFM.003–.004.004–.006.005–.006
    5IIHPKCU406569841312SFM.003–.004.004–.006.005–.006
    6SOSTKD1425131219682624SFM.003–.004.004–.006.005–.006
    6SISTKD1425131219682624SFM.003–.004.004–.006.005–.006
    6UOLDKCU4082011481476SFM.003–.004.004–.006.005–.006
    6UILDKCU4082011481476SFM.003–.004.004–.006.005–.006
    6IOLDKMF6569841312SFM.003–.004.004–.006.005–.006
    6IILDKMF6569841312SFM.003–.004.004–.006.005–.006
    Pouces
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage SFM
    MiniValeur initialeMaxiØDFR02... .500 .625"DFR03... .688 .750"DFR04... .813 1.00"
    S1SOGDKCU40197230246SFM.002–.002.002–.003.002–.004
    ILDKCU40
    UOGDKCU40131164197SFM.002–.002.002–.003.002–.004
    ILDKC7140
    IOMDKC71408298131SFM.002–.002.002–.003.002–.004
    IMDKC7140
    2SOGDKCU40164197230SFM.002–.002.002–.003.002–.004
    ILDKCU40
    UOGDKCU4098131164SFM.002–.002.002–.003.002–.004
    ILDKC7140
    IOMDKC71408298131SFM.002–.002.002–.003.002–.004
    IMDKC7140
    3SOGDKCU40230262295SFM.002–.004.002–.003.002–.004
    ILDKCU40
    UOGDKCU40164197230SFM.002–.003.002–.004.002–.004
    ILDKC7140
    IOMDKC714098131164SFM.002–.003.002–.004.002–.004
    IMDKC7140
    4SOGDKCU40230262295SFM.002–.003.002–.004.002–.004
    ILDKCU40
    UOGDKCU40164197230SFM.002–.003.002–.004.002–.004
    ILDKC7140
    IOMDKC714098131164SFM.002–.003.002–.004.002–.004
    IMDKC7140
    Pouces
    Vitesse de coupe vc
    Plage SFMPlage des avances (fz) par diamètre
    Groupe MatièresConditionLogementGéométrieNuanceMiniValeur initialeMaxiØDFR02... .500"-.625"DFR03... .688"-.750"DFR04... .813"-1.00"
    S1SOGDKCU40197230246SFM.002–.002.002–.003.002–.004
    1SILDKCU40197230246SFM.002–.002.002–.003.002–.004
    1UOGDKCU40131164197SFM.002–.002.002–.003.002–.004
    1UILDKC7140131164197SFM.002–.002.002–.003.002–.004
    1IOMDKC71408298131SFM.002–.002.002–.003.002–.004
    1IIMDKC71408298131SFM.002–.002.002–.003.002–.004
    2SOGDKCU40164197230SFM.002–.002.002–.003.002–.004
    2SILDKCU40164197230SFM.002–.002.002–.003.002–.004
    2UOGDKCU4098131164SFM.002–.002.002–.003.002–.004
    2UILDKC714098131164SFM.002–.002.002–.003.002–.004
    2IOMDKC71408298131SFM.002–.002.002–.003.002–.004
    2IIMDKC71408298131SFM.002–.002.002–.003.002–.004
    3SOGDKCU40230262295SFM.002–.004.002–.003.002–.004
    3SILDKCU40230262295SFM.002–.004.002–.003.002–.004
    3UOGDKCU40164197230SFM.002–.003.002–.004.002–.004
    3UILDKC7140164197230SFM.002–.003.002–.004.002–.004
    3IOMDKC714098131164SFM.002–.003.002–.004.002–.004
    3IIMDKC714098131164SFM.002–.003.002–.004.002–.004
    4SOGDKCU40230262295SFM.002–.003.002–.004.002–.004
    4SILDKCU40230262295SFM.002–.003.002–.004.002–.004
    4UOGDKCU40164197230SFM.002–.003.002–.004.002–.004
    4UILDKC7140164197230SFM.002–.003.002–.004.002–.004
    4IOMDKC714098131164SFM.002–.003.002–.004.002–.004
    4IIMDKC714098131164SFM.002–.003.002–.004.002–.004

    DFR™ • PCD • Inch

    Métrique
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage m/min
    MiniValeur initialeMaxiØDFR04 20,50–24,00mm
    N1SOSTKD1425396720841mm/tr0,06–0,08
    ISTKD1425
    2SOSTKD1425369670782mm/tr0,12–0,18
    ISTKD1425
    3SOSTKD1425341619723mm/tr0,12–0,18
    ISTKD1425
    4SOSTKD1425475720841mm/tr0,12–0,18
    ISTKD1425
    5SOSTKD1425480720864mm/tr0,06–0,08
    ISTKD1425
    Pouces
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage SFM
    MiniValeur initialeMaxiØDFR04 .813"–1.00"
    N1SOSTKD1425130023622760IPR.002–.003
    ISTKD1425
    2SOSTKD1425120921972567IPR.005–.007
    ISTKD1425
    3SOSTKD1425111820322374IPR.005–.007
    ISTKD1425
    4SOSTKD1425156023622760IPR.005–.007
    ISTKD1425
    5SOSTKD1425157523622834IPR.002–.003
    ISTKD1425
    Métrique
    Vitesse de coupe vc
    Plage m/minPlage des avances (fz) par diamètre
    Groupe MatièresConditionLogementGéométrieNuanceMiniValeur initialeMaxiØDFR04 20,50–24,00 mm
    N1SOSTKD1425396720841mm/r0,06–0,08
    1SISTKD1425396720841mm/r0,06–0,08
    2SOSTKD1425369670782mm/r0,12–0,18
    2SISTKD1425369670782mm/r0,12–0,18
    3SOSTKD1425341619723mm/r0,12–0,18
    3SISTKD1425341619723mm/r0,12–0,18
    4SOSTKD1425475720841mm/r0,12–0,18
    4SISTKD1425475720841mm/r0,12–0,18
    5SOSTKD1425480720864mm/r0,06–0,08
    5SISTKD1425480720864mm/r0,06–0,08
    Vous êtes sur le point d’ajouter à votre page mes solutions. Souhaitez-vous continuer ?
    Select the destination where you want to move à.
    Nouvelle Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Veuillez saisir un nom valide
    product-image
    Please adjust the following properties from

    catalogue ISO

    catalogue ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Vous devez être connecté pour voir les informations de votre tableau de bord
    Session expired due to inactivity, please login again
    Le(s) produit(s) () que vous essayez d’ajouter au panier est/sont indisponible(s), veuillez Contacter le service client.
    article(s) ajouté(s) avec succès au panier
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number catalogue ISO Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk