Surfaçage
Ramping : Ébauche
Fraisage de côté/avec épaulement : Léger chanfrein
Fraisage — Arrosage interne
Fraisage — 3 taillesDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 2487015 |
| Ref. ISO Catalogue | 50A06RS45OF06A |
| Ref. ANSI Catalogue | 50A06RS45OF06A |
| [D1] Diamètre effectif de coupe | 50 mm |
| [D1] Diamètre effectif de coupe | 1.968 in |
| [D1MAX] Diamètre de coupe maximal | 58.9 mm |
| [D1MAX] Diamètre de coupe maximal | 2.318 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 22 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | .8661 in |
| [D6] Diamètre du moyeu | 42 mm |
| [D6] Diamètre du moyeu | 1.654 in |
| [L] Longueur totale | 43 mm |
| [L] Longueur totale | 1.692 in |
| [AP1MAX] 1re profondeur de coupe maximale | 3.5 mm |
| [AP1MAX] 1re profondeur de coupe maximale | .138 in |
| Nombre de plaquettes | 6 |
| Angle de ramping maximum | 5 |
| Poids en kilogrammes | 0.36 |
| T/Min max | 12730 |
SurfaçageRamping : ÉbaucheFraisage de côté/avec épaulement : Léger chanfreinFraisage — Arrosage interneFraisage — 3 taillesCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Groupe Matières | Travaux légers | Applications générales | Travaux lourds | |||
| (géomètrie légère) | – | (géomètrie solide) | ||||
| résistance à l’usure |  | ténacité | ||||
| Géométrie | Nuance | Géométrie | Nuance | Géométrie | Nuance | |
| P1–P2 | .E..LB | KCPK30 | .E..GB | KCPM40 | .S..HB | KCPK30 |
| P3–P4 | .E..LB | KCPK30 | .E..GB | KCPK30 | .S..HB | KCPK30 |
| P5–P6 | .E..LB | KC725M | .E..GB | KC725M | .S..HB | KC725M |
| M1–M2 | .E..LB | KCSM40 | .E..GB | KCSM40 | .S..HB | KCSM40 |
| M3 | .E..LB | KCSM40 | .E..GB | KCSM40 | .S..HB | KCSM40 |
| K1–K2 | .E..LB | KCK15 | .E..GB | KC520M | .E..GB | KCK15 |
| K3 | .E..LB | KCPK30 | .E..GB | KC520M | .S..HB | KCPK30 |
| N1–N2 | .F..LBJ | KC410M | .E..LBJ | KC422M | .E..LBJ | KC422M |
| N3 | .F..LBJ | KC410M | .F..LNJ | KC410M | .F..LNJ | KC410M |
| S1–S2 | .E..LB | KC725M | .E..GB | KC725M | .S..HB | KC725M |
| S3 | .E..LB | KCSM40 | .E..GB | KCSM40 | .S..HB | KCSM40 |
| S4 | .E..LB | KCSM40 | .E..GB | KCSM40 | .S..HB | KCSM40 |
| H1 | – | – | – | – | – | – |
| Géométrie de plaquette | Avance par dent de départ recommandée (Fz) en relation avec le % de l'Engagement Radial (ae) | Géométrie de plaquette | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .F..LBJ | 0,17 | 0,61 | 1,03 | 0,12 | 0,44 | 0,74 | 0,09 | 0,33 | 0,55 | 0,08 | 0,29 | 0,48 | 0,07 | 0,26 | 0,44 | .F..LBJ |
| .F..LNJ | 0,17 | 0,61 | 1,03 | 0,12 | 0,44 | 0,74 | 0,09 | 0,33 | 0,55 | 0,08 | 0,29 | 0,48 | 0,07 | 0,26 | 0,44 | .F..LNJ |
| .E..LBJ | 0,17 | 0,61 | 1,13 | 0,12 | 0,44 | 0,81 | 0,09 | 0,33 | 0,61 | 0,08 | 0,29 | 0,53 | 0,07 | 0,26 | 0,48 | .E..LBJ |
| .E..LB | 0,34 | 0,75 | 1,20 | 0,25 | 0,54 | 0,86 | 0,19 | 0,40 | 0,64 | 0,16 | 0,35 | 0,56 | 0,15 | 0,32 | 0,51 | .E..LB |
| .S..LB | 0,34 | 0,73 | 1,30 | 0,25 | 0,53 | 0,93 | 0,19 | 0,39 | 0,69 | 0,16 | 0,34 | 0,60 | 0,15 | 0,32 | 0,55 | .S..LB |
| .E..GB | 0,34 | 0,87 | 1,39 | 0,25 | 0,62 | 1,00 | 0,19 | 0,47 | 0,74 | 0,16 | 0,41 | 0,65 | 0,15 | 0,37 | 0,59 | .E..GB |
| .S..HB | 0,34 | 0,87 | 1,49 | 0,25 | 0,62 | 1,07 | 0,19 | 0,47 | 0,79 | 0,16 | 0,41 | 0,69 | 0,15 | 0,37 | 0,63 | .S..HB |
| Travaux légers | Applications générales | Travaux lourds |
| Géométrie de plaquette | Avance par dent de départ recommandée (Fz) en relation avec le % de l'Engagement Radial (ae) | Géométrie de plaquette | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .F..LBJ | .007 | .025 | .041 | .005 | .018 | .030 | .004 | .013 | .022 | .003 | .012 | .019 | .003 | .011 | .018 | .F..LBJ |
| .F..LNJ | .007 | .025 | .041 | .005 | .018 | .030 | .004 | .013 | .022 | .003 | .012 | .019 | .003 | .011 | .018 | .F..LNJ |
| .E..LBJ | .007 | .025 | .045 | .005 | .018 | .033 | .004 | .013 | .024 | .003 | .012 | .021 | .003 | .011 | .019 | .E..LBJ |
| .E..LB | .014 | .029 | .047 | .010 | .021 | .034 | .007 | .016 | .025 | .006 | .014 | .022 | .006 | .013 | .020 | .E..LB |
| .S..LB | .014 | .029 | .051 | .010 | .021 | .037 | .007 | .016 | .027 | .006 | .014 | .024 | .006 | .012 | .022 | .S..LB |
| .E..GB | .014 | .034 | .055 | .010 | .025 | .039 | .007 | .018 | .029 | .006 | .016 | .025 | .006 | .015 | .023 | .E..GB |
| .S..HB | .014 | .034 | .059 | .010 | .025 | .042 | .007 | .018 | .031 | .006 | .016 | .027 | .006 | .015 | .025 | .S..HB |
| Travaux légers | Applications générales | Travaux lourds |
| Groupe Matières | KC410M | KC422M | KC520M | KC522M | KC725M | KCK15 | KCPM20 | KCPK30 | |||||||||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | 395 | 345 | 325 | 315 | 275 | 255 | – | – | – | 660 | 580 | 535 | 545 | 475 | 440 |
| 2 | – | – | – | – | – | – | – | – | – | 330 | 290 | 240 | 260 | 230 | 195 | – | – | – | 410 | 370 | 330 | 335 | 305 | 275 | |
| 3 | – | – | – | – | – | – | – | – | – | 305 | 255 | 215 | 240 | 205 | 170 | – | – | – | 370 | 330 | 305 | 305 | 275 | 250 | |
| 4 | – | – | – | – | – | – | – | – | – | 270 | 225 | 180 | 215 | 180 | 145 | – | – | – | 275 | 255 | 230 | 225 | 210 | 190 | |
| 5 | – | – | – | – | – | – | – | – | – | 225 | 200 | 180 | 180 | 160 | 145 | – | – | – | 330 | 300 | 275 | 310 | 275 | 255 | |
| 6 | – | – | – | – | – | – | – | – | – | 200 | 150 | 120 | 160 | 120 | 95 | – | – | – | 230 | 200 | 175 | 190 | 165 | – | |
| M | 1 | – | – | – | – | – | – | – | – | – | 245 | 215 | 200 | 205 | 180 | 165 | – | – | – | 270 | 240 | 205 | 250 | 220 | 190 |
| 2 | – | – | – | – | – | – | – | – | – | 225 | 190 | 160 | 185 | 160 | 130 | – | – | – | 245 | 215 | 190 | 225 | 195 | 170 | |
| 3 | – | – | – | – | – | – | – | – | – | 170 | 145 | 115 | 140 | 120 | 95 | – | – | – | 195 | 175 | 150 | 175 | 160 | 140 | |
| K | 1 | – | – | – | – | – | – | 325 | 295 | 260 | 275 | 250 | 220 | – | – | – | 505 | 460 | 410 | 435 | 390 | 350 | 355 | 320 | 285 |
| 2 | – | – | – | – | – | – | 255 | 225 | 215 | 215 | 195 | 180 | – | – | – | 400 | 355 | 330 | 345 | 310 | 280 | 280 | 255 | 230 | |
| 3 | – | – | – | – | – | – | 215 | 190 | 170 | 180 | 160 | 145 | – | – | – | 335 | 300 | 275 | 290 | 255 | 240 | 235 | 210 | 195 | |
| N | 1–2 | 1460 | 1300 | 1195 | 1285 | 1135 | 1050 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 1300 | 1195 | 1100 | 1135 | 1050 | 915 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 60 | 50 | 35 | 55 | 45 | 30 | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 85 | 60 | 45 | 75 | 55 | 35 | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| Groupe Matières | KC410M | KC422M | KC520M | KC522M | KC725M | KCK15 | KCPM20 | KCPK30 | |||||||||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | 1300 | 1130 | 1060 | 1030 | 900 | 840 | – | – | – | 2170 | 1910 | 1760 | 1780 | 1560 | 1450 |
| 2 | – | – | – | – | – | – | – | – | – | 1080 | 950 | 790 | 860 | 760 | 640 | – | – | – | 1340 | 1210 | 1090 | 1100 | 1000 | 900 | |
| 3 | – | – | – | – | – | – | – | – | – | 1000 | 840 | 700 | 790 | 670 | 550 | – | – | – | 1210 | 1090 | 1000 | 1000 | 900 | 820 | |
| 4 | – | – | – | – | – | – | – | – | – | 890 | 730 | 590 | 710 | 590 | 470 | – | – | – | 910 | 840 | 760 | 740 | 690 | 620 | |
| 5 | – | – | – | – | – | – | – | – | – | 730 | 660 | 590 | 590 | 530 | 470 | – | – | – | 1090 | 980 | 900 | 1020 | 910 | 830 | |
| 6 | – | – | – | – | – | – | – | – | – | 650 | 490 | 400 | 520 | 400 | 310 | – | – | – | 760 | 660 | 570 | 620 | 540 | – | |
| M | 1 | – | – | – | – | – | – | – | – | – | 800 | 710 | 650 | 670 | 590 | 540 | – | – | – | 880 | 790 | 680 | 820 | 720 | 620 |
| 2 | – | – | – | – | – | – | – | – | – | 730 | 620 | 520 | 610 | 520 | 430 | – | – | – | 800 | 700 | 620 | 730 | 640 | 550 | |
| 3 | – | – | – | – | – | – | – | – | – | 550 | 480 | 370 | 460 | 400 | 310 | – | – | – | 640 | 570 | 490 | 570 | 520 | 460 | |
| K | 1 | – | – | – | – | – | – | 1060 | 960 | 850 | 900 | 820 | 720 | – | – | – | 1660 | 1510 | 1340 | 1420 | 1280 | 1150 | 1160 | 1050 | 940 |
| 2 | – | – | – | – | – | – | 830 | 740 | 700 | 710 | 640 | 590 | – | – | – | 1310 | 1170 | 1090 | 1130 | 1010 | 920 | 920 | 830 | 760 | |
| 3 | – | – | – | – | – | – | 700 | 620 | 560 | 590 | 530 | 480 | – | – | – | 1100 | 980 | 900 | 950 | 840 | 780 | 770 | 690 | 640 | |
| N | 1–2 | 4790 | 4260 | 3920 | 4220 | 3720 | 3440 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 4260 | 3920 | 3600 | 3720 | 3440 | 3000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| D1 mm | D1 maxi mm | maxi ap mm | Angle de coupe (°) | longueur de plongée en mm |
| 32 | 41,1 | 9 | 11,0 | 46,3 |
| 40 | 49,0 | 9 | 7,5 | 68,4 |
| 50 | 58,9 | 9 | 5,0 | 102,9 |
| 63 | 71,8 | 9 | 3,9 | 132,0 |
| 80 | 88,7 | 9 | 2,9 | 177,7 |
| 100 | 108,6 | 9 | 2,2 | 234,3 |
| 125 | 133,6 | 9 | 1,7 | 303,2 |
| 160 | 168,5 | 9 | 1,3 | 396,6 |
| Profondeur de coupe maxi AP | mm | Section de coupe (fz) |
| Ap1 maxi | 3,5 | 1 x fz |
| Ap2 maxi | 9,0 | 0,6 x fz |
| Diamètre d'alésage | ||||
| D1 mm | D1 maxi mm | mini (mm) | maxi mm | Ap/tr. mm |
| 32 | 41,1 | 61,7 | 81,7 | 4,7 |
| 40 | 49,0 | 77,5 | 97,6 | 4,7 |
| 50 | 58,9 | 97,4 | 117,4 | 4,7 |
| 63 | 71,8 | 123,3 | 143,3 | 4,7 |
| 80 | 88,7 | 157,2 | 177,2 | 4,7 |
| 100 | 108,6 | 197,2 | 217,1 | 4,7 |
| 125 | 133,6 | 247,1 | 267,0 | 4,7 |
| 160 | 168,5 | 317,1 | 377,0 | 4,7 |
| Profondeur de plongée maxi | mm |
| Ap1 maxi | 3,2 |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?