Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho

Kennametal ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Itens adicionado com sucesso ao carrinho
Ver o carrinho
Exit Search Voltar à solução

Editando solução

Adicionando solução

Nome da solução:{{SolutionName}}

    Produto semelhante ao:

    voltar a | Modificar semelhante a

    KenTIP™ FS • Corpo da broca • 1,5 x D • Haste SS • Métrico

    Furação modular • Haste reta (SS)

    Número de material100109841

    KenTIP™ FS • Corpo da broca • 1,5 x D • Haste SS • Métrico
    KenTIP™ FS • Corpo da broca • 1,5 x D • Haste SS • Métrico
    KenTIP™ FS • Corpo da broca • 1,5 x D • Haste SS • Métrico
    KenTIP™ FS • Corpo da broca • 1,5 x D • Haste SS • Métrico
    Open expanded view
    KenTIP™ FS • Corpo da broca • 1,5 x D • Haste SS • Métrico
    KenTIP™ FS • Corpo da broca • 1,5 x D • Haste SS • Métrico
    KenTIP™ FS • Corpo da broca • 1,5 x D • Haste SS • Métrico
    Representação genérica
    Entre em contacto com a nossa equipa Comercial  para saber todas as suas opções de preços

    Características e benefícios

    • Canais de cavacos grandes ultra-polidos garantem evacuação de cavacos sem complicações, aumentando a performance e a vida útil da ferramenta.
    • Fornecimento de refrigerante à ponta de furação e à face de inclinação para fornecimento garantido de refrigeração onde for necessário.
    • Cada corpo de broca vem com uma chave inteligente KenTIP FS. A troca de insertos na máquina se torna fácil, elimina tempo morto e gera economia.
    • DrillingDrilling
    • Drilling: Stacked PlatesDrilling: Stacked Plates
    • Furação — Refrigeração internaFuração — Refrigeração interna
    • Haste — Cilíndrica lisa ≤h6Haste — Cilíndrica lisa ≤h6
    Tolerância • Métrico
    D1 métricoTolerância k8
    60,000/+0,018
    6–100,000/+0,022
    10–180,000/+0,027
    18–260,000/+0,033
    Tolerância • Polegada
    D1 polegadaTolerância k8
    0.23620.0000/+0.0007
    0.2362–0.39370.0000/+0.0009
    0.3937–0.70870.0000/+0.0011
    0.7087–1.02360.0000/+0.0013
    Grupo de materialVelocidade de corte vcPolegada
    Faixa SFMAvanço recomendado por rotação
    Mín.Valor inicialMáx..236.315.394.472.551.630.787.9451.023
    P0315415575IPR.004 .007.004 .009.005 .012.006 .015.007 .016.007 .018.009 .020.011 .023.011 .024
    1300430560IPR.004 .007.004 .009.005 .012.006 .015.007 .016.007 .018.009 .020.011 .023.011 .024
    2330460590IPR.004 .009.004 .010.005 .013.006 .016.007 .018.007 .019.009 .022.011 .025.011 .026
    3200330430IPR.004 .011.004 .012.005 .014.006 .016.006 .017.007 .018.009 .020.012 .022.012 .023
    4200330430IPR.004 .011.004 .012.005 .014.006 .016.006 .017.007 .018.009 .020.010 .022.010 .023
    5200260330IPR.004 .007.004 .009.004 .011.005 .013.006 .015.006 .016.008 .018.009 .020.010 .021
    6200230260IPR.004 .007.004 .009.004 .011.005 .013.006 .015.006 .016.008 .018.009 .020.010 .021
    K1260400560IPR.005 .011.005 .013.006 .015.007 .017.009 .019.010 .022.012 .025.014 .030.015 .031
    2260360390IPR.005 .011.005 .013.006 .015.007 .017.009 .019.010 .022.012 .025.014 .030.015 .031
    3160260330IPR.004 .009.005 .010.005 .013.006 .014.007 .016.008 .018.011 .021.013 .025.013 .026
    Grupo de materialVelocidade de corte vcMétrico
    Faixa m/minAvanço recomendado por rotação
    Mín.Valor inicialMáx.6,08,010,012,014,016,020,024,026,0
    P095125175mm/r0,10 0,190,11 0,220,13 0,300,15 0,370,17 0,410,19 0,450,24 0,520,28 0,600,29 0,62
    190130170mm/r0,10 0,190,11 0,220,13 0,300,15 0,370,17 0,410,19 0,450,24 0,520,28 0,600,29 0,62
    2100140180mm/r0,10 0,190,11 0,260,13 0,340,15 0,410,17 0,450,19 0,490,24 0,560,28 0,640,29 0,62
    360100130mm/r0,10 0,170,11 0,310,12 0,360,14 0,410,16 0,440,18 0,460,23 0,510,30 0,560,31 0,58
    460100130mm/r0,10 0,170,11 0,310,12 0,360,14 0,410,16 0,440,18 0,460,23 0,510,25 0,560,26 0,58
    56080100mm/r0,09 0,160,10 0,220,11 0,280,12 0,340,14 0,370,16 0,400,20 0,460,24 0,520,25 0,54
    6607080mm/r0,09 0,160,10 0,220,11 0,280,12 0,340,14 0,370,16 0,400,20 0,460,24 0,520,25 0,54
    K180120170mm/r0,12 0,210,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    280110120mm/r0,12 0,210,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    35080100mm/r0,11 0,190,13 0,270,15 0,330,17 0,370,19 0,420,21 0,460,28 0,540,32 0,630,33 0,66
    Grupo de materialVelocidade de corte vcMétrico
    Faixa m/minAvanço recomendado por rotação
    Mín.Valor inicialMáx.6,08,010,012,014,016,020,024,026,0
    P095125175mm/r0,10 0,190,11 0,220,13 0,300,15 0,370,17 0,410,19 0,450,24 0,520,28 0,600,29 0,62
    190130170mm/r0,10 0,190,11 0,220,13 0,300,15 0,370,17 0,410,19 0,450,24 0,520,28 0,600,29 0,62
    2100140180mm/r0,10 0,190,11 0,260,13 0,340,15 0,410,17 0,450,19 0,490,24 0,560,28 0,640,29 0,62
    360100130mm/r0,10 0,170,11 0,310,12 0,360,14 0,410,16 0,440,18 0,460,23 0,510,30 0,560,31 0,58
    460100130mm/r0,10 0,170,11 0,310,12 0,360,14 0,410,16 0,440,18 0,460,23 0,510,25 0,560,26 0,58
    56080100mm/r0,09 0,160,10 0,220,11 0,280,12 0,340,14 0,370,16 0,400,20 0,460,24 0,520,25 0,54
    6607080mm/r0,09 0,160,10 0,220,11 0,280,12 0,340,14 0,370,16 0,400,20 0,460,24 0,520,25 0,54
    K180120170mm/r0,12 0,210,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    280110120mm/r0,12 0,210,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    35080100mm/r0,11 0,190,13 0,270,15 0,330,17 0,370,19 0,420,21 0,460,28 0,540,32 0,630,33 0,66
    Grupo de materialVelocidade de corte vcMétrico
    Faixa m/minAvanço recomendado por rotação
    Mín.Valor inicialMáx.6,08,010,012,014,016,020,024,026,0
    M1506090mm/r0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    2306090mm/r0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    3205060mm/r0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    Grupo de materialVelocidade de corte vcPolegada
    Faixa SFMAvanço recomendado por rotação
    Mín.Valor inicialMáx..236.315.394.472.551.630.787.9451.023
    M1160200300IPR.003 .005.003 .006.004 .007.004 .008.005 .009.005 .009.006 .011.007 .013.008 .013
    2100200300IPR.003 .005.003 .006.004 .007.004 .008.005 .009.005 .009.006 .011.007 .013.008 .013
    370160200IPR.003 .005.003 .006.004 .007.004 .008.005 .009.005 .009.006 .011.007 .013.008 .013
    Grupo de materialVelocidade de corte vcMétrico
    Faixa m/minAvanço recomendado por rotação
    Mín.Valor inicialMáx.6,08,010,012,014,016,020,024,026,0
    M1506090mm/r0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    2306090mm/r0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    3205060mm/r0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    Grupo de materialVelocidade de corte vcMétrico
    Faixa m/minAvanço recomendado por rotação
    Mín.Valor inicialMáx.6,08,010,012,014,016,020,024,026,0
    K1100175200mm/r0,12 0,290,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    2100160180mm/r0,12 0,290,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    37085120mm/r0,11 0,230,13 0,270,15 0,330,17 0,370,19 0,420,21 0,460,28 0,540,32 0,630,33 0,66
    Grupo de materialVelocidade de corte vcPolegada
    Faixa SFMAvanço recomendado por rotação
    Mín.Valor inicialMáx..236.315.394.472.551.630.787.9451.023
    K1330570660IPR.005 .011.005 .013.006 .015.007 .017.009 .019.010 .022.012 .025.014 .030.015 .031
    2330520590IPR.005 .011.005 .013.006 .015.007 .017.009 .019.010 .022.012 .025.014 .030.015 .031
    3230280390IPR.004 .009.005 .010.005 .013.006 .014.007 .016.008 .018.011 .021.013 .025.013 .026
    Grupo de materialVelocidade de corte vcMétrico
    Faixa m/minAvanço recomendado por rotação
    Mín.Valor inicialMáx.6,08,010,012,014,016,020,024,026,0
    K1100175200mm/r0,12 0,290,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    2100160180mm/r0,12 0,290,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    37085120mm/r0,11 0,230,13 0,270,15 0,330,17 0,370,19 – 0,420,21 0,460,28 0,540,32 0,630,33 0,66
    Grupo de materialVelocidade de corte vcMétrico
    Faixa m/minAvanço recomendado por rotação
    Mín.Valor inicialMáx.6,08,010,012,016,020,0
    S4101320mm/r0,02–0,080,03–0,100,04–0,120,05–0,160,05–0,180,06–0,20
    N1100230270mm/r0,13–0,220,16–0,240,20–0,280,24–0,320,28–0,400,32–0,48
    2100220270mm/r0,14–0,230,16–0,280,20–0,320,24–0,360,28–0,400,32–0,52
    390180230mm/r0,13–0,220,16–0,240,20–0,280,24–0,320,28–0,400,32–0,48
    490130200mm/r0,10–0,180,16–0,280,20–0,320,24–0,360,28–0,400,32–0,52
    C270110140mm/r0,03-0,100,04-0,120,05-0,150,05-0,180,06-0,210,07-0,23
    3101320mm/r0,02-0,080,03-0,100,04-0,120,05-0,160,05-0,180,06-0,20
    4102040mm/r0,02-0,080,03-0,100,04-0,120,05-0,160,05-0,180,06-0,20
    Grupo de materialVelocidade de corte vcPolegada
    Faixa SFMAvanço recomendado por rotação
    Mín.Valor inicialMáx.1/4 .2505/16 .3133/8 .3751/2 .5005/8 .6253/4 .750
    S4304070IPR.001–.003.001–.004.002–.005.002–.006.002–.007.002–.008
    N1330750890IPR.005–.009.006–.009.008–.011.009–.013.011–.016.013–.019
    2330720890IPR.006–.009.006–.011.008–.013.009–.014.011–.017.013–.021
    3300590750IPR.005–.009.006–.009.008–.011.009–.013.011–.016.013–.019
    4300430660IPR.004–.007.006–.011.008–.013.009–.014.011–.016.013–.019
    C4230360460IPR.001-.004.002-.005.002-.006.002-.007.002-.008.003-.009
    4304070IPR.001-.003.001-.004.002-.005.002-.006.002-.007.002-.008
    43070130IPR.001-.003.001-.004.002-.005.002-.006.002-.007.002-.008
    Grupo de materialVelocidade de corte vcMétrico
    Faixa m/minAvanço recomendado por rotação
    Mín.Valor inicialMáx.6.08.010.012.016.020.0
    S4101320mm/r0.02～0.080.03～0.100.04～0.120.05～0.160.05～0.180.06～0.20
    N1100230270mm/r0.13～0.220.16～0.240.20～0.280.24～0.320.28～0.400.32～0.48
    2100220270mm/r0.14～0.230.16～0.280.20～0.320.24～0.360.28～0.400.32～0.52
    390180230mm/r0.13～0.220.16～0.240.20～0.280.24～0.320.28～0.400.32～0.48
    490130200mm/r0.10～0.180.16～0.280.20～0.320.24～0.360.28～0.400.32～0.52
    C270110140mm/r0.03～0.100.04～0.120.05～0.150.05～0.180.06～0.210.07～0.23
    3101320mm/r0.02～0.080.03～0.100.04～0.120.05～0.160.05～0.180.06～0.20
    4102040mm/r0.02～0.080.03～0.100.04～0.120.05～0.160.05～0.180.06～0.20
    Grupo de materialVelocidade de corte vcPolegada
    Faixa SFMAvanço recomendado por rotação
    Mín.Valor inicialMáx.1/4 .2505/16 .3133/8 .3751/2 .5005/8 .6253/4 .750
    C1260330490IPR.002 .008.002 .008.002 .008.002 .008.002 .008.002 .008
    Grupo de materialVelocidade de corte vcMétrico
    Faixa m/minAvanço recomendado por rotação
    Mín.Valor inicialMáx.6,08,010,012,016,020,0
    C180100150mm/r0,05 0,200,05 0,200,05 0,200,05 0,200,05 0,200,05 0,20
    Grupo de materialVelocidade de corte vcMétrico
    Faixa m/minAvanço recomendado por rotação
    Mín.Valor inicialMáx.6,08.010.012.016.020.0
    C180100150mm/r0.05～0.200.05～0.200.05～0.200.05～0.200.05～0.200.05～0.20
    Grupo de materialVelocidade de corte vcMétrico
    Faixa m/minAvanço recomendado por rotação
    Mín.Valor inicialMáx.6,08,010,012,014,016,020,024,026,0
    P0110140170mm/r0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    1110140170mm/r0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    2100120140mm/r0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    380100120mm/r0,10–0,170,11–0,200,12–0,220,14–0,240,16–0,260,18–0,280,20–0,310,21–0,350,22–0,36
    47090110mm/r0,10–0,170,11–0,200,12–0,220,14–0,240,16–0,260,18–0,280,20–0,310,21–0,350,22–0,36
    56080100mm/r0,09–0,160,10–0,180,11–0,200,13–0,220,15–0,240,16–0,260,18–0,290,19–0,330,20–0,34
    66080100mm/r0,09–0,160,10–0,180,11–0,200,13–0,220,15–0,240,16–0,260,18–0,290,19–0,330,20–0,34
    M1406080mm/r0,07–0,120,08–0,140,09–0,160,11–0,180,12–0,200,13–0,220,14–0,240,15–0,260,16–0,27
    2355570mm/r0,07–0,120,08–0,140,09–0,160,11–0,180,12–0,200,13–0,220,14–0,240,15–0,260,16–0,27
    K190120175mm/r0,12-0,210,14-0,240,16-0,280,18-0,320,20-0,360,22-0,400,25-0,440,28-0,480,29-0,50
    280110140mm/r0,12–0,210,14–0,240,16–0,280,18–0,320,20–0,360,22–0,400,25–0,440,28–0,480,29–0,50
    37080100mm/r0,11-0,190,13-0,220,14-0,250,16-0,280,18-0,320,21-0,360,23-0,400,26-0,440,27-0,46
    Grupo de materialVelocidade de corte vcPolegada
    Faixa SFMAvanço recomendado por rotação
    Mín.Valor inicialMáx..236.315.394.472.551.630.787.9451.023
    P0360460560IPR0.004–0.0070.004–0.0090.005–0.0090.006–0.0100.007–0.0110.007–0.0120.008–0.0130.009–0.0150.009–0.016
    1360460560IPR0.004–0.0070.004–0.0090.005–0.0090.006–0.0100.007–0.0110.007–0.0120.008–0.0130.009–0.0150.009–0.016
    2330400460IPR0.004–0.0070.004–0.0090.005–0.0090.006–0.0100.007–0.0110.007–0.0120.008–0.0130.009–0.0150.009–0.016
    3260330400IPR0.004–0.0070.004–0.0080.005–0.0090.006–0.0090.006–0.0100.007–0.0110.008–0.0120.008–0.0140.009–0.014
    4230330360IPR0.004–0.0070.004–0.0080.005–0.0090.006–0.0090.006–0.0100.007–0.0110.008–0.0120.008–0.0140.009–0.014
    5200260330IPR0.004–0.0060.004–0.0070.004–0.0080.005–0.0090.006–0.0090.006–0.0100.007–0.0110.007–0.0130.008–0.013
    6200260330IPR0.004–0.0060.004–0.0070.004–0.0080.005–0.0090.006–0.0090.006–0.0100.007–0.0110.007–0.0130.008–0.013
    M1130200260IPR0.003–0.0050.003–0.0060.004–0.0060.004–0.0070.005–0.0080.005–0.0090.006–0.0090.006–0.0100.006–0.011
    2120180230IPR0.003–0.0050.003–0.0060.004–0.0060.004–0.0070.005–0.0080.005–0.0090.006–0.0090.006–0.0100.006–0.011
    K1300400580IPR0.005-0.0080.006-0.0090.006-0.0110.007-0.0130.008-0.0140.009-0.0160.010-0.0170.011-0.0190.011-0.020
    2260360460IPR0.005–0.0080.006–0.0090.006–0.0110.007–0.0130.008–0.0140.009–0.0160.010–0.0170.011–0.0190.011–0.020
    3230260330IPR0.004-0.0070.005-0.0090.006-0.0100.006-0.0110.007-0.0130.008-0.0140.009-0.0160.010-0.0170.011-0.018
    Grupo de materialVelocidade de corte vcMétrico
    Faixa m/minAvanço recomendado por rotação
    Mín.Valor inicialMáx.6,08,010,012,014,016,020,024,026,0
    P0110140170mm/r0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    1110140170mm/r0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    2100120140mm/r0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    380100120mm/r0,10–0,170,11–0,200,12–0,220,14–0,240,16–0,260,18–0,280,20–0,310,21–0,350,22–0,36
    47090110mm/r0,10–0,170,11–0,200,12–0,220,14–0,240,16–0,260,18–0,280,20–0,310,21–0,350,22–0,36
    56080100mm/r0,09–0,160,10–0,180,11–0,200,13–0,220,15–0,240,16–0,260,18–0,290,19–0,330,20–0,34
    66080100mm/r0,09–0,160,10–0,180,11–0,200,13–0,220,15–0,240,16–0,260,18–0,290,19–0,330,20–0,34
    M1406080mm/r0,07–0,120,08–0,140,09–0,160,11–0,180,12–0,200,13–0,220,14–0,240,15–0,260,16–0,27
    2355570mm/r0,07–0,120,08–0,140,09–0,160,11–0,180,12–0,200,13–0,220,14–0,240,15–0,260,16–0,27
    K190120175mm/r0,12-0,210,14-0,240,16-0,280,18-0,320,20-0,360,22-0,400,25-0,440,28-0,480,29-0,50
    280110140mm/r0,12–0,210,14–0,240,16–0,280,18–0,320,20–0,360,22–0,400,25–0,440,28–0,480,29–0,50
    37080100mm/r0,11-0,190,13-0,220,14-0,250,16-0,280,18-0,320,21-0,360,23-0,400,26-0,440,27-0,46
    Grupo de materialVelocidade de corte vcMétrico
    Faixa m/minAvanço recomendado por rotação
    Mín.Valor inicialMáx.6,08,010,012,016,020,024,026,0
    P070125175mm/r0,09–0,180,10–0,210,12–0,240,14–0,300,18–0,360,23–0,420,27–0,480,28–0,50
    170120170mm/r0,09–0,180,10–0,220,12–0,240,14–0,300,18–0,360,23–0,420,27–0,480,28–0,50
    290135180mm/r0,09–0,180,10–0,250,12–0,270,14–0,330,18–0,390,23–0,450,27–0,510,28–0,50
    36095130mm/r0,09–0,160,10–0,280,11–0,290,13–0,330,17–0,370,22–0,410,28–0,450,30–0,46
    45090130mm/r0,09–0,160,10–0,280,11–0,290,13–0,330,17–0,370,22–0,410,24–0,450,25–0,46
    53065100mm/r0,09–0,150,10–0,180,10–0,220,11–0,270,15–0,320,19–0,370,23–0,420,24–0,43
    6406080mm/r0,09–0,150,09–0,180,10–0,220,10–0,270,15–0,320,19–0,370,23–0,420,24–0,43
    M1205590mm/r0,07–0,120,08–0,130,08–0,140,10–0,180,12–0,220,15–0,260,18–0,270,19–0,28
    2306090mm/r0,07–0,120,08–0,130,08–0,160,10–0,180,12–0,220,15–0,260,18–0,270,19–0,28
    3204060mm/r0,07–0,120,08–0,120,08–0,140,10–0,160,12–0,220,15–0,260,18–0,270,19–0,28
    K180140200mm/r0,11–0,260,13–0,320,15–0,440,18–0,490,25–0,580,29–0,640,35–0,700,36–0,75
    280130180mm/r0,11–0,260,13–0,310,15–0,360,18–0,400,25–0,480,29–0,600,35–0,700,36–0,75
    37095120mm/r0,10-0,220,12-0,250,15-0,350,16-0,400,20-0,480,26-0,600,30-0,630,32-0,65
    S1102030mm/r0,05–0,090,06–0,100,07–0,120,08–0,130,10–0,150,11–0,170,12–0,190,13–0,21
    2102030mm/r0,05–0,090,06–0,100,07–0,120,08–0,130,10–0,150,11–0,170,12–0,190,13–0,21
    3152535mm/r0,05–0,090,06–0,100,07–0,120,08–0,130,10–0,150,11–0,170,12–0,190,13–0,21
    4203040mm/r0,04–0,070,05–0,090,05–0,100,07–0,120,08–0,130,08–0,130,09–0,150,10–0,17
    Grupo de materialVelocidade de corte vcPolegada
    Faixa SFMAvanço recomendado por rotação
    Mín.Valor inicialMáx..236.315.394.472.630.787.9451.023
    P0230410570IPR.004–.007.004–.008.005–.009.006–.012.007–.014.009–.016.011–.019.011–.020
    1230390560IPR.004–.007.004–.009.005–.009.006–.012.007–.014.009–.016.011–.019.011–.020
    2300440590IPR.004–.007.004–.010.005–.011.006–.013.007–.015.009–.018.011–.020.011–.020
    3200310430IPR.004–.006.004–.011.004–.011.005–.013.007–.015.009–.016.011–.018.012–.018
    4160300430IPR.004–.006.004–.011.004–.011.005–.013.007–.015.009–.016.009–.018.010–.018
    5100210330IPR.004–.006.004–.007.004–.009.004–.011.006–.013.008–.015.009–.016.009–.017
    6130200260IPR.004–.006.004–.007.004–.009.004–.011.006–.013.008–.015.009–.016.009–.017
    M170180300IPR.003–.005.003–.005.003–.006.004–.007.005–.009.006–.010.007–.011.008–.011
    2100200300IPR.003–.005.003–.005.003–.006.004–.007.005–.009.006–.010.007–.011.008–.011
    370130200IPR.003–.005.003–.005.003–.006.004–.006.005–.009.006–.010.007–.011.008–.011
    K1260460660IPR.004–.010.005–.013.006–.017.007–.019.010–.023.011–.025.014–.028.014–.030
    2260430590IPR.004–.010.005–.012.006–.014.007–.016.010–.019.011–.024.014–.028.014–.030
    3230310390IPR.004–.009.005–.010.006–.014.006–.016.008–.019.010–.024.012–.025.013–.026
    S13070100IPR.002–.004.002–.004.003–.005.003–.005.004–.006.004–.007.005–.008.005–.008
    23070100IPR.002–.004.002–.004.003–.005.003–.005.004–.006.004–.007.005–.008.005–.008
    35080110IPR.002–.004.002–.004.003–.005.003–.005.004–.006.004–.007.005–.008.005–.008
    470100130IPR.002–.003.002–.004.002–.004.003–.005.003–.005.003–.005.004–.006.004–.007
    Grupo de materialVelocidade de corte vcMétrico
    Faixa m/minAvanço recomendado por rotação
    Mín.Valor inicialMáx.6,08,010,012,016,020,024,026,0
    P070125175mm/r0,09–0,180,10–0,210,12–0,240,14–0,300,18–0,360,23–0,420,27–0,480,28–0,50
    170120170mm/r0,09–0,180,10–0,220,12–0,240,14–0,300,18–0,360,23–0,420,27–0,480,28–0,50
    290135180mm/r0,09–0,180,10–0,250,12–0,270,14–0,330,18–0,390,23–0,450,27–0,510,28–0,50
    36095130mm/r0,09–0,160,10–0,280,11–0,290,13–0,330,17–0,370,22–0,410,28–0,450,30–0,46
    45090130mm/r0,09–0,160,10–0,280,11–0,290,13–0,330,17–0,370,22–0,410,24–0,450,25–0,46
    53065100mm/r0,09–0,150,10–0,180,10–0,220,11–0,270,15–0,320,19–0,370,23–0,420,24–0,43
    6406080mm/r0,09–0,150,09–0,180,10–0,220,10–0,270,15–0,320,19–0,370,23–0,420,24–0,43
    M1205590mm/r0,07–0,120,08–0,130,08–0,140,10–0,180,12–0,220,15–0,260,18–0,270,19–0,28
    2306090mm/r0,07–0,120,08–0,130,08–0,160,10–0,180,12–0,220,15–0,260,18–0,270,19–0,28
    3204060mm/r0,07–0,120,08–0,120,08–0,140,10–0,160,12–0,220,15–0,260,18–0,270,19–0,28
    K180140200mm/r0,11–0,260,13–0,320,15–0,440,18–0,490,25–0,580,29–0,640,35–0,700,36–0,75
    280130180mm/r0,11–0,260,13–0,310,15–0,360,18–0,400,25–0,480,29–0,600,35–0,700,36–0,75
    37095120mm/r0,10-0,220,12-0,250,15-0,350,16-0,400,20-0,480,26-0,600,30-0,630,32-0,65
    S1102030mm/r0,05–0,090,06–0,100,07–0,120,08–0,130,10–0,150,11–0,170,12–0,190,13–0,21
    2102030mm/r0,05–0,090,06–0,100,07–0,120,08–0,130,10–0,150,11–0,170,12–0,190,13–0,21
    3152535mm/r0,05–0,090,06–0,100,07–0,120,08–0,130,10–0,150,11–0,170,12–0,190,13–0,21
    4203040mm/r0,04–0,070,05–0,090,05–0,100,07–0,120,08–0,130,08–0,130,09–0,150,10–0,17
    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    Select the destination where you want to move a.
    Novo Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Digite um nome válido
    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Código de catálogo ISO Classe  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk