Drill Fix • DFT

Selecionar filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (371)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(371)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(371)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(371)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(371)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(371)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(365)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(365)
    • M Stainless Steel (369)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(369)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(369)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(369)
    • K Cast Iron (365)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(365)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(365)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(365)
    • N Non-Ferrous Materials (366)
      • N1
        Wrought Aluminum (366)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(366)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(362)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (360)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (366)
      • N6
        Carbon, Graphite Composites, CFRP (360)
      • N7
        MMC's (343)
    • S High-Temp Alloys (366)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(360)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(360)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(366)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(366)
    • H Hardened Materials (264)
      • H1
        Hardened Materials 44-48 HRC(264)
      • H2
        Hardened Materials 48-55 HRC(264)
      • H3
        Hardened Materials 56-60 HRC(264)
      • H4
        Hardened Materials >60 HRC(264)
    Selecione First Choice
    • BR (17)
    • CN (28)
    • DE (28)
    • GB (27)
    • IN (30)
    • SG (24)
    • US (125)
    Applications
    Applications
    • Convex DrillingConvex Drilling (254)
    • DrillingDrilling (256)
    • Inclined Entry DrillingInclined Entry Drilling (254)
    • Inclined Exit DrillingInclined Exit Drilling (254)
    • X-Offset DrillingX-Offset Drilling (256)
    Cutting Diameter
    Cutting Diameter
    • 0.625 in(3)
    • 0.63 in(2)
    • 0.656 in(3)
    • 0.669 in(2)
    • 0.687 in(2)
    • 0.689 in(1)
    • 0.704 in(3)
    • 0.709 in(2)
    • 0.734 in(3)
    • 0.748 in(3)
    • 0.75 in(5)
    • 0.781 in(2)
    • 0.787 in(3)
    • 0.814 in(3)
    • 0.828 in(3)
    • 0.845 in(2)
    • 0.866 in(3)
    • 0.875 in(5)
    • 0.906 in(6)
    • 0.937 in(2)
    • 0.939 in(1)
    • 0.946 in(2)
    • 0.969 in(3)
    • 0.984 in(7)
    • 1.0 in(7)
    • 1.024 in(4)
    • 1.031 in(1)
    • 1.032 in(1)
    • 1.063 in(7)
    • 1.094 in(2)
    • 1.102 in(4)
    • 1.125 in(4)
    • 1.143 in(5)
    • 1.156 in(2)
    • 1.181 in(4)
    • 1.187 in(1)
    • 1.188 in(1)
    • 1.219 in(3)
    • 1.22 in(5)
    • 1.25 in(5)
    • 1.26 in(4)
    • 1.281 in(1)
    • 1.282 in(1)
    • 1.299 in(3)
    • 1.313 in(3)
    • 1.339 in(3)
    • 1.375 in(4)
    • 1.379 in(3)
    • 1.407 in(2)
    • 1.417 in(3)
    • 1.437 in(2)
    • 1.438 in(2)
    • 1.457 in(3)
    • 1.469 in(3)
    • 1.496 in(3)
    • 1.5 in(5)
    • 1.532 in(4)
    • 1.536 in(3)
    • 1.563 in(4)
    • 1.575 in(3)
    • 1.614 in(3)
    • 1.625 in(4)
    • 1.655 in(3)
    • 1.687 in(2)
    • 1.688 in(2)
    • 1.693 in(3)
    • 1.732 in(3)
    • 1.75 in(2)
    • 1.772 in(3)
    • 1.811 in(3)
    • 1.813 in(2)
    • 1.85 in(2)
    • 1.875 in(2)
    • 1.891 in(3)
    • 1.929 in(2)
    • 1.937 in(1)
    • 1.938 in(1)
    • 1.969 in(2)
    • 2.0 in(4)
    • 2.008 in(2)
    • 2.047 in(2)
    • 2.087 in(2)
    • 2.125 in(4)
    • 2.126 in(2)
    • 2.165 in(1)
    • 2.205 in(1)
    • 2.244 in(1)
    • 2.25 in(1)
    • 2.283 in(1)
    • 2.323 in(1)
    • 2.362 in(1)
    • 2.375 in(1)
    • 2.402 in(1)
    • 2.441 in(1)
    • 2.48 in(1)
    • 2.5 in(1)
    • 2.52 in(1)
    • 2.559 in(1)
    • 2.598 in(1)
    • 2.638 in(1)
    • 2.677 in(1)
    • 2.717 in(1)
    • 2.75 in(1)
    • 2.757 in(1)
    • 2.795 in(1)
    • 2.835 in(1)
    • 2.874 in(1)
    • 2.914 in(1)
    • 2.953 in(1)
    • 2.992 in(1)
    • 3.0 in(1)
    • 3.031 in(1)
    • 3.071 in(1)
    • 3.11 in(1)
    • 3.15 in(1)
    • 3.189 in(1)
    • 3.228 in(1)
    • 3.25 in(1)
    Cutting Diameter MinaCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 15.875 mm(3)
    • 16.0 mm(2)
    • 16.651 mm(3)
    • 17.0 mm(2)
    • 17.45 mm(2)
    • 17.475 mm(1)
    • 17.85 mm(3)
    • 18.0 mm(2)
    • 18.651 mm(3)
    • 19.0 mm(3)
    • 19.05 mm(5)
    • 19.826 mm(1)
    • 19.85 mm(1)
    • 20.0 mm(3)
    • 20.651 mm(3)
    • 21.0 mm(3)
    • 21.451 mm(2)
    • 22.0 mm(3)
    • 22.225 mm(5)
    • 23.0 mm(6)
    • 23.8 mm(2)
    • 23.826 mm(1)
    • 24.0 mm(2)
    • 24.625 mm(3)
    • 25.0 mm(7)
    • 25.401 mm(7)
    • 26.0 mm(4)
    • 26.175 mm(1)
    • 26.201 mm(1)
    • 27.0 mm(7)
    • 27.8 mm(2)
    • 28.0 mm(4)
    • 28.576 mm(4)
    • 29.0 mm(5)
    • 29.35 mm(2)
    • 30.0 mm(4)
    • 30.151 mm(1)
    • 30.175 mm(1)
    • 30.951 mm(2)
    • 30.975 mm(1)
    • 31.0 mm(5)
    • 31.75 mm(5)
    • 32.0 mm(4)
    • 32.525 mm(1)
    • 32.551 mm(1)
    • 33.0 mm(3)
    • 33.35 mm(3)
    • 34.0 mm(3)
    • 34.926 mm(4)
    • 35.0 mm(3)
    • 35.7 mm(2)
    • 36.0 mm(3)
    • 36.5 mm(2)
    • 36.525 mm(2)
    • 37.0 mm(3)
    • 37.301 mm(2)
    • 37.325 mm(1)
    • 38.0 mm(3)
    • 38.1 mm(5)
    • 38.875 mm(4)
    • 39.0 mm(3)
    • 39.7 mm(4)
    • 40.0 mm(3)
    • 41.0 mm(3)
    • 41.276 mm(4)
    • 42.0 mm(3)
    • 42.85 mm(2)
    • 42.875 mm(2)
    • 43.0 mm(3)
    • 44.0 mm(3)
    • 44.45 mm(2)
    • 45.0 mm(3)
    • 46.0 mm(3)
    • 46.051 mm(2)
    • 47.0 mm(2)
    • 47.625 mm(2)
    • 48.0 mm(3)
    • 49.0 mm(2)
    • 49.2 mm(1)
    • 49.225 mm(1)
    • 50.0 mm(2)
    • 50.801 mm(4)
    • 51.0 mm(2)
    • 52.0 mm(2)
    • 53.0 mm(2)
    • 53.975 mm(4)
    • 54.0 mm(2)
    • 55.0 mm(1)
    • 56.0 mm(1)
    • 57.0 mm(1)
    • 57.151 mm(1)
    • 58.0 mm(1)
    • 59.0 mm(1)
    • 60.0 mm(1)
    • 60.325 mm(1)
    • 61.0 mm(1)
    • 62.0 mm(1)
    • 63.0 mm(1)
    • 63.5 mm(1)
    • 64.0 mm(1)
    • 65.0 mm(1)
    • 66.0 mm(1)
    • 67.0 mm(1)
    • 68.0 mm(1)
    • 69.0 mm(1)
    • 69.851 mm(1)
    • 70.0 mm(1)
    • 71.0 mm(1)
    • 72.0 mm(1)
    • 73.0 mm(1)
    • 74.0 mm(1)
    • 75.0 mm(1)
    • 76.0 mm(1)
    • 76.2 mm(1)
    • 77.0 mm(1)
    • 78.0 mm(1)
    • 79.0 mm(1)
    • 80.0 mm(1)
    • 81.0 mm(1)
    • 82.0 mm(1)
    • 82.551 mm(1)
    Cutting Diameter MinaCutting Diameter Max
    Cutting Condition
    Cutting Condition
    • Interrupted (72)
    • Stable (91)
    • Unstable (84)
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 38.401 mm(6)
    • 40.651 mm(2)
    • 41.651 mm(2)
    • 44.45 mm(2)
    • 44.7 mm(2)
    • 46.6 mm(2)
    • 47.625 mm(2)
    • 48.5 mm(3)
    • 48.7 mm(3)
    • 48.901 mm(6)
    • 49.0 mm(2)
    • 49.776 mm(1)
    • 51.551 mm(2)
    • 53.6 mm(1)
    • 55.575 mm(3)
    • 57.526 mm(2)
    • 58.901 mm(2)
    • 59.1 mm(4)
    • 59.7 mm(2)
    • 60.95 mm(2)
    • 63.5 mm(6)
    • 66.05 mm(1)
    • 66.101 mm(2)
    • 66.3 mm(4)
    • 66.675 mm(1)
    • 67.3 mm(1)
    • 68.575 mm(1)
    • 69.851 mm(1)
    • 71.425 mm(1)
    • 72.4 mm(1)
    • 73.4 mm(1)
    • 74.625 mm(1)
    • 76.2 mm(5)
    • 76.4 mm(6)
    • 76.5 mm(4)
    • 76.601 mm(2)
    • 76.801 mm(2)
    • 77.476 mm(2)
    • 79.375 mm(1)
    • 79.5 mm(2)
    • 81.0 mm(1)
    • 81.275 mm(1)
    • 82.551 mm(1)
    • 83.825 mm(2)
    • 85.726 mm(2)
    • 87.0 mm(1)
    • 87.625 mm(2)
    • 88.0 mm(1)
    • 88.9 mm(4)
    • 91.45 mm(2)
    • 92.075 mm(1)
    • 93.0 mm(1)
    • 93.976 mm(2)
    • 95.25 mm(4)
    • 96.7 mm(2)
    • 96.801 mm(2)
    • 96.9 mm(6)
    • 97.0 mm(2)
    • 97.801 mm(2)
    • 98.426 mm(1)
    • 99.051 mm(2)
    • 100.0 mm(2)
    • 100.025 mm(1)
    • 101.601 mm(3)
    • 104.0 mm(2)
    • 104.15 mm(2)
    • 104.775 mm(1)
    • 107.95 mm(3)
    • 108.0 mm(2)
    • 111.0 mm(2)
    • 111.125 mm(1)
    • 111.25 mm(1)
    • 111.5 mm(1)
    • 112.0 mm(4)
    • 112.101 mm(4)
    • 112.2 mm(2)
    • 114.301 mm(3)
    • 115.575 mm(1)
    • 116.0 mm(2)
    • 117.2 mm(4)
    • 117.4 mm(2)
    • 117.476 mm(1)
    • 117.5 mm(2)
    • 117.601 mm(2)
    • 117.7 mm(2)
    • 119.375 mm(1)
    • 120.0 mm(2)
    • 120.65 mm(1)
    • 123.2 mm(1)
    • 123.825 mm(1)
    • 124.0 mm(2)
    • 125.0 mm(14)
    • 127.0 mm(4)
    • 128.0 mm(2)
    • 130.175 mm(1)
    • 132.0 mm(1)
    • 133.35 mm(1)
    • 135.9 mm(2)
    • 136.0 mm(1)
    • 139.701 mm(2)
    • 140.0 mm(15)
    • 143.0 mm(1)
    • 144.0 mm(1)
    • 146.05 mm(2)
    • 148.0 mm(1)
    • 149.225 mm(1)
    • 151.125 mm(1)
    • 152.0 mm(1)
    • 152.4 mm(2)
    • 155.576 mm(2)
    • 156.0 mm(1)
    • 158.75 mm(3)
    • 160.0 mm(1)
    • 164.0 mm(1)
    • 165.101 mm(2)
    • 168.0 mm(1)
    • 171.451 mm(2)
    • 172.0 mm(1)
    • 174.625 mm(1)
    • 176.0 mm(1)
    • 177.8 mm(1)
    • 180.0 mm(1)
    • 184.0 mm(1)
    • 184.15 mm(1)
    • 188.0 mm(1)
    • 190.5 mm(2)
    • 192.0 mm(1)
    • 196.851 mm(1)
    • 203.201 mm(2)
    • 206.5 mm(1)
    • 215.9 mm(2)
    Maximum Hole Depth [L4] MinaMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 1.512 in(6)
    • 1.6 in(2)
    • 1.641 in(2)
    • 1.75 in(2)
    • 1.76 in(2)
    • 1.835 in(2)
    • 1.875 in(2)
    • 1.909 in(3)
    • 1.917 in(3)
    • 1.925 in(6)
    • 1.929 in(2)
    • 1.96 in(1)
    • 2.031 in(2)
    • 2.11 in(1)
    • 2.188 in(3)
    • 2.265 in(2)
    • 2.319 in(2)
    • 2.327 in(4)
    • 2.35 in(2)
    • 2.4 in(2)
    • 2.5 in(6)
    • 2.6 in(1)
    • 2.602 in(2)
    • 2.61 in(4)
    • 2.625 in(1)
    • 2.65 in(1)
    • 2.7 in(1)
    • 2.75 in(1)
    • 2.813 in(1)
    • 2.85 in(1)
    • 2.89 in(1)
    • 2.938 in(1)
    • 3.0 in(5)
    • 3.008 in(6)
    • 3.012 in(4)
    • 3.016 in(2)
    • 3.024 in(2)
    • 3.051 in(2)
    • 3.125 in(1)
    • 3.13 in(2)
    • 3.189 in(1)
    • 3.2 in(1)
    • 3.25 in(1)
    • 3.301 in(2)
    • 3.375 in(2)
    • 3.426 in(1)
    • 3.45 in(2)
    • 3.465 in(1)
    • 3.5 in(4)
    • 3.6 in(2)
    • 3.625 in(1)
    • 3.661 in(1)
    • 3.7 in(2)
    • 3.75 in(4)
    • 3.807 in(2)
    • 3.811 in(2)
    • 3.815 in(6)
    • 3.819 in(2)
    • 3.85 in(2)
    • 3.875 in(1)
    • 3.9 in(2)
    • 3.938 in(3)
    • 4.0 in(3)
    • 4.094 in(2)
    • 4.1 in(2)
    • 4.125 in(1)
    • 4.25 in(3)
    • 4.252 in(2)
    • 4.37 in(2)
    • 4.375 in(1)
    • 4.38 in(1)
    • 4.39 in(1)
    • 4.409 in(4)
    • 4.413 in(4)
    • 4.417 in(2)
    • 4.5 in(3)
    • 4.55 in(1)
    • 4.567 in(2)
    • 4.614 in(4)
    • 4.622 in(2)
    • 4.625 in(1)
    • 4.626 in(2)
    • 4.63 in(2)
    • 4.634 in(2)
    • 4.7 in(1)
    • 4.724 in(2)
    • 4.75 in(1)
    • 4.851 in(1)
    • 4.875 in(1)
    • 4.882 in(2)
    • 4.921 in(14)
    • 5.0 in(4)
    • 5.039 in(2)
    • 5.125 in(1)
    • 5.197 in(1)
    • 5.25 in(1)
    • 5.351 in(2)
    • 5.354 in(1)
    • 5.5 in(2)
    • 5.513 in(15)
    • 5.63 in(1)
    • 5.67 in(1)
    • 5.75 in(2)
    • 5.827 in(1)
    • 5.875 in(1)
    • 5.95 in(1)
    • 5.984 in(1)
    • 6.0 in(2)
    • 6.125 in(2)
    • 6.142 in(1)
    • 6.25 in(3)
    • 6.299 in(1)
    • 6.457 in(1)
    • 6.5 in(2)
    • 6.614 in(1)
    • 6.75 in(2)
    • 6.772 in(1)
    • 6.875 in(1)
    • 6.929 in(1)
    • 7.0 in(1)
    • 7.087 in(1)
    • 7.244 in(1)
    • 7.25 in(1)
    • 7.402 in(1)
    • 7.5 in(2)
    • 7.559 in(1)
    • 7.75 in(1)
    • 8.0 in(2)
    • 8.13 in(1)
    • 8.5 in(2)
    Maximum Hole Depth [L4] MinaMaximum Hole Depth [L4] Max
    Reach
    Reach
    • 0.787 in(1)
    • 0.828 in(1)
    • 1.85 in(5)
    • 1.891 in(1)
    • 2.126 in(8)
    • 2.244 in(14)
    • 2.362 in(3)
    • 2.48 in(3)
    • 2.717 in(5)
    • 2.835 in(6)
    • 2.874 in(4)
    • 2.992 in(2)
    • 3.031 in(2)
    • 3.11 in(4)
    • 3.228 in(8)
    • 3.386 in(3)
    • 3.465 in(2)
    • 3.622 in(1)
    • 3.661 in(2)
    • 3.74 in(3)
    • 3.781 in(1)
    • 3.819 in(14)
    • 3.858 in(3)
    • 3.976 in(2)
    • 4.016 in(1)
    • 4.055 in(1)
    • 4.134 in(2)
    • 4.173 in(1)
    • 4.213 in(5)
    • 4.291 in(2)
    • 4.331 in(1)
    • 4.37 in(2)
    • 4.488 in(2)
    • 4.529 in(2)
    • 4.606 in(19)
    • 4.724 in(2)
    • 4.764 in(4)
    • 4.882 in(1)
    • 4.921 in(4)
    • 5.0 in(2)
    • 5.039 in(3)
    • 5.118 in(2)
    • 5.157 in(1)
    • 5.197 in(11)
    • 5.236 in(2)
    • 5.276 in(3)
    • 5.354 in(1)
    • 5.433 in(2)
    • 5.472 in(2)
    • 5.591 in(2)
    • 5.63 in(1)
    • 5.748 in(2)
    • 5.787 in(14)
    • 5.867 in(1)
    • 5.906 in(3)
    • 5.945 in(1)
    • 6.024 in(1)
    • 6.102 in(2)
    • 6.142 in(1)
    • 6.26 in(1)
    • 6.378 in(12)
    • 6.417 in(3)
    • 6.457 in(2)
    • 6.496 in(2)
    • 6.614 in(1)
    • 6.732 in(1)
    • 6.772 in(2)
    • 6.851 in(1)
    • 6.891 in(1)
    • 7.008 in(4)
    • 7.087 in(1)
    • 7.244 in(2)
    • 7.283 in(2)
    • 7.362 in(11)
    • 7.402 in(3)
    • 7.441 in(1)
    • 7.521 in(2)
    • 7.559 in(1)
    • 7.598 in(1)
    • 7.718 in(1)
    • 7.913 in(2)
    • 8.071 in(1)
    • 8.15 in(1)
    • 8.228 in(2)
    • 8.387 in(2)
    • 8.661 in(1)
    • 8.74 in(1)
    • 8.898 in(1)
    • 9.016 in(1)
    • 9.055 in(1)
    • 9.094 in(1)
    • 9.214 in(1)
    • 9.252 in(1)
    • 9.371 in(1)
    • 9.528 in(1)
    • 9.764 in(1)
    • 10.039 in(1)
    Reach MinaReach Max
    Reach
    Reach
    • 20.0 mm(1)
    • 21.0 mm(1)
    • 47.0 mm(5)
    • 48.0 mm(1)
    • 54.0 mm(8)
    • 57.0 mm(14)
    • 60.0 mm(3)
    • 63.0 mm(3)
    • 69.0 mm(5)
    • 72.0 mm(6)
    • 73.0 mm(4)
    • 76.0 mm(2)
    • 77.0 mm(2)
    • 79.0 mm(4)
    • 82.0 mm(8)
    • 86.0 mm(3)
    • 88.0 mm(2)
    • 92.0 mm(1)
    • 93.0 mm(2)
    • 95.0 mm(3)
    • 96.0 mm(1)
    • 97.0 mm(14)
    • 98.0 mm(3)
    • 101.0 mm(2)
    • 102.0 mm(1)
    • 103.0 mm(1)
    • 105.0 mm(2)
    • 106.0 mm(1)
    • 107.0 mm(5)
    • 109.0 mm(2)
    • 110.0 mm(1)
    • 111.0 mm(2)
    • 114.0 mm(2)
    • 115.0 mm(2)
    • 117.0 mm(19)
    • 120.0 mm(2)
    • 121.0 mm(4)
    • 124.0 mm(1)
    • 125.0 mm(4)
    • 127.0 mm(2)
    • 128.0 mm(3)
    • 130.0 mm(2)
    • 131.0 mm(1)
    • 132.0 mm(11)
    • 133.0 mm(2)
    • 134.0 mm(3)
    • 136.0 mm(1)
    • 138.0 mm(2)
    • 139.0 mm(2)
    • 142.0 mm(2)
    • 143.0 mm(1)
    • 146.0 mm(2)
    • 147.0 mm(14)
    • 149.0 mm(1)
    • 150.0 mm(3)
    • 151.0 mm(1)
    • 153.0 mm(1)
    • 155.0 mm(2)
    • 156.0 mm(1)
    • 159.0 mm(1)
    • 162.0 mm(12)
    • 163.0 mm(3)
    • 164.0 mm(2)
    • 165.0 mm(2)
    • 168.0 mm(1)
    • 171.0 mm(1)
    • 172.0 mm(2)
    • 174.0 mm(1)
    • 175.0 mm(1)
    • 178.0 mm(4)
    • 180.0 mm(1)
    • 184.0 mm(2)
    • 185.0 mm(2)
    • 187.0 mm(11)
    • 188.0 mm(3)
    • 189.0 mm(1)
    • 191.0 mm(2)
    • 192.0 mm(1)
    • 193.0 mm(1)
    • 196.0 mm(1)
    • 201.0 mm(2)
    • 205.0 mm(1)
    • 207.0 mm(1)
    • 209.0 mm(2)
    • 213.0 mm(2)
    • 220.0 mm(1)
    • 222.0 mm(1)
    • 226.0 mm(1)
    • 229.0 mm(1)
    • 230.0 mm(1)
    • 231.0 mm(1)
    • 234.0 mm(1)
    • 235.0 mm(1)
    • 238.0 mm(1)
    • 242.0 mm(1)
    • 248.0 mm(1)
    • 255.0 mm(1)
    Reach MinaReach Max
    Connection Style
    Connection Style
    • Cylindrical Shank 2 Flats (130)
    • KM (7)
    • Whistle Drive 2 (134)
    • Whistle Notch 2 CylindricalEnd (8)
    Number of Flutes
    Number of Flutes
    • 1 (1)
    • 2 (278)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (203)
    • 3.0 (385)
    Cutting Edges Per Insert MinaCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 4.331 in(3)
    • 4.724 in(5)
    • 4.843 in(3)
    • 4.875 in(1)
    • 5.0 in(4)
    • 5.236 in(5)
    • 5.25 in(1)
    • 5.375 in(1)
    • 5.625 in(1)
    • 5.63 in(4)
    • 5.827 in(3)
    • 5.875 in(3)
    • 5.944 in(1)
    • 6.0 in(4)
    • 6.008 in(1)
    • 6.219 in(1)
    • 6.22 in(6)
    • 6.25 in(5)
    • 6.375 in(2)
    • 6.494 in(1)
    • 6.5 in(1)
    • 6.508 in(1)
    • 6.614 in(3)
    • 6.625 in(2)
    • 6.75 in(2)
    • 6.811 in(7)
    • 6.875 in(3)
    • 6.883 in(1)
    • 7.0 in(3)
    • 7.125 in(1)
    • 7.126 in(1)
    • 7.205 in(7)
    • 7.25 in(2)
    • 7.375 in(2)
    • 7.5 in(1)
    • 7.598 in(7)
    • 7.625 in(3)
    • 7.75 in(5)
    • 7.756 in(1)
    • 7.758 in(1)
    • 7.875 in(1)
    • 7.913 in(1)
    • 7.992 in(7)
    • 8.0 in(4)
    • 8.125 in(1)
    • 8.15 in(1)
    • 8.189 in(2)
    • 8.228 in(1)
    • 8.25 in(1)
    • 8.307 in(1)
    • 8.375 in(5)
    • 8.425 in(1)
    • 8.5 in(3)
    • 8.583 in(10)
    • 8.622 in(1)
    • 8.625 in(3)
    • 8.74 in(1)
    • 8.75 in(2)
    • 8.819 in(1)
    • 8.875 in(4)
    • 8.898 in(1)
    • 8.976 in(1)
    • 9.0 in(2)
    • 9.125 in(4)
    • 9.134 in(1)
    • 9.173 in(12)
    • 9.25 in(3)
    • 9.291 in(1)
    • 9.375 in(4)
    • 9.625 in(1)
    • 9.646 in(1)
    • 9.75 in(2)
    • 9.764 in(14)
    • 9.803 in(1)
    • 9.875 in(2)
    • 9.961 in(1)
    • 10.0 in(2)
    • 10.118 in(1)
    • 10.125 in(2)
    • 10.25 in(1)
    • 10.375 in(1)
    • 10.472 in(1)
    • 10.5 in(3)
    • 10.63 in(1)
    • 10.749 in(14)
    • 10.75 in(1)
    • 10.787 in(1)
    • 10.875 in(1)
    • 10.945 in(1)
    • 11.0 in(3)
    • 11.102 in(1)
    • 11.125 in(3)
    • 11.375 in(3)
    • 11.457 in(1)
    • 11.614 in(1)
    • 11.625 in(3)
    • 11.75 in(1)
    • 11.772 in(1)
    • 11.875 in(1)
    • 12.0 in(1)
    • 12.125 in(2)
    • 12.126 in(1)
    • 12.283 in(1)
    • 12.441 in(1)
    • 12.5 in(2)
    • 12.598 in(1)
    • 12.75 in(1)
    • 13.0 in(1)
    • 13.125 in(1)
    • 13.25 in(1)
    • 13.625 in(1)
    • 13.875 in(1)
    • 14.0 in(1)
    • 14.125 in(1)
    • 14.26 in(1)
    • 14.375 in(1)
    • 14.625 in(1)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 110.0 mm(3)
    • 120.0 mm(5)
    • 123.0 mm(3)
    • 123.825 mm(1)
    • 127.0 mm(4)
    • 133.0 mm(5)
    • 133.35 mm(1)
    • 136.525 mm(1)
    • 142.875 mm(1)
    • 143.0 mm(4)
    • 148.0 mm(3)
    • 149.225 mm(3)
    • 150.951 mm(1)
    • 152.4 mm(4)
    • 152.6 mm(1)
    • 157.951 mm(1)
    • 158.0 mm(6)
    • 158.75 mm(5)
    • 161.925 mm(2)
    • 164.951 mm(1)
    • 165.101 mm(1)
    • 165.3 mm(1)
    • 168.0 mm(3)
    • 168.275 mm(2)
    • 171.451 mm(2)
    • 173.0 mm(7)
    • 174.625 mm(3)
    • 174.826 mm(1)
    • 177.8 mm(3)
    • 180.976 mm(1)
    • 181.0 mm(1)
    • 183.0 mm(7)
    • 184.15 mm(2)
    • 187.326 mm(2)
    • 190.5 mm(1)
    • 193.0 mm(7)
    • 193.675 mm(3)
    • 196.851 mm(5)
    • 197.0 mm(1)
    • 197.05 mm(1)
    • 200.025 mm(1)
    • 201.0 mm(1)
    • 203.0 mm(7)
    • 203.201 mm(4)
    • 206.375 mm(1)
    • 207.0 mm(1)
    • 208.0 mm(2)
    • 209.0 mm(1)
    • 209.55 mm(1)
    • 211.0 mm(1)
    • 212.726 mm(5)
    • 214.0 mm(1)
    • 215.9 mm(3)
    • 218.0 mm(10)
    • 219.0 mm(1)
    • 219.076 mm(3)
    • 222.0 mm(1)
    • 222.25 mm(2)
    • 224.0 mm(1)
    • 225.425 mm(4)
    • 226.0 mm(1)
    • 228.0 mm(1)
    • 228.601 mm(2)
    • 231.775 mm(4)
    • 232.0 mm(1)
    • 233.0 mm(12)
    • 234.951 mm(3)
    • 236.0 mm(1)
    • 238.125 mm(4)
    • 244.476 mm(1)
    • 245.0 mm(1)
    • 247.65 mm(2)
    • 248.0 mm(14)
    • 249.0 mm(1)
    • 250.826 mm(2)
    • 253.0 mm(1)
    • 254.0 mm(2)
    • 257.0 mm(1)
    • 257.175 mm(2)
    • 260.35 mm(1)
    • 263.526 mm(1)
    • 266.0 mm(1)
    • 266.7 mm(3)
    • 270.0 mm(1)
    • 273.0 mm(14)
    • 273.05 mm(1)
    • 274.0 mm(1)
    • 276.225 mm(1)
    • 278.0 mm(1)
    • 279.401 mm(3)
    • 282.0 mm(1)
    • 282.575 mm(3)
    • 288.925 mm(3)
    • 291.0 mm(1)
    • 295.0 mm(1)
    • 295.276 mm(3)
    • 298.45 mm(1)
    • 299.0 mm(1)
    • 301.625 mm(1)
    • 304.8 mm(1)
    • 307.975 mm(2)
    • 308.0 mm(1)
    • 312.0 mm(1)
    • 316.0 mm(1)
    • 317.5 mm(2)
    • 320.0 mm(1)
    • 323.85 mm(1)
    • 330.201 mm(1)
    • 333.375 mm(1)
    • 336.55 mm(1)
    • 346.076 mm(1)
    • 352.425 mm(1)
    • 355.6 mm(1)
    • 358.776 mm(1)
    • 362.201 mm(1)
    • 365.125 mm(1)
    • 371.475 mm(1)
    Over All Length [L] MinaOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(35)
    • 0.024 in(2)
    • 0.031 in(65)
    • 0.034 in(9)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(35)
    • 0.601 mm(2)
    • 0.8 mm(65)
    • 0.851 mm(9)
    Corner Radius MinaCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(111)
    Corner Chamfer MinaCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(111)
    Corner Chamfer MinaCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • CS5 (262)
    • K6 (82)
    • KC7140 (284)
    • KC720 (287)
    • KC7215 (281)
    • KC7225 (262)
    • KC7815 (262)
    • KC7820 (198)
    • KC7845 (64)
    • KC7935 (279)
    • KC810 (241)
    • KC990 (262)
    • KCMS35 (210)
    • KCPK10 (274)
    • KCU25 (283)
    • KCU40 (289)
    • KD1425 (246)
    • KMF (268)
    • KU40D (262)
    Hand Of Tool
    Hand Of Tool
    • R (279)
    Wiper Insert
    Wiper Insert
    • N (111)
    Drill Type
    Drill Type
    • 86-01 (279)
    insertGeometry
    Shape
    Shape
    • X-TRIGON 84 (111)
    Insert IC Size
    Insert IC Size
    • 5.0 mm(7)
    • 6.0 mm(28)
    • 8.0 mm(17)
    • 10.0 mm(18)
    • 12.0 mm(17)
    • 15.0 mm(15)
    • 17.6 mm(9)
    Insert IC Size MinaInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.197 in(7)
    • 0.237 in(28)
    • 0.315 in(17)
    • 0.394 in(18)
    • 0.473 in(17)
    • 0.591 in(15)
    • 0.694 in(9)
    Insert IC Size MinaInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 3.301 mm(7)
    • 3.975 mm(28)
    • 5.2 mm(1)
    • 5.301 mm(16)
    • 6.525 mm(1)
    • 6.625 mm(17)
    • 7.851 mm(1)
    • 7.95 mm(16)
    • 9.826 mm(1)
    • 9.925 mm(14)
    • 11.525 mm(1)
    • 11.625 mm(4)
    • 11.65 mm(4)
    Cutting Edge Length MinaCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.13 in(7)
    • 0.156 in(28)
    • 0.206 in(1)
    • 0.209 in(16)
    • 0.257 in(1)
    • 0.261 in(17)
    • 0.309 in(1)
    • 0.313 in(16)
    • 0.387 in(1)
    • 0.391 in(14)
    • 0.454 in(1)
    • 0.458 in(4)
    • 0.459 in(4)
    Cutting Edge Length MinaCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • DS (6)
    • GD (23)
    • HD (4)
    • HP (40)
    • LD (6)
    • MD (27)
    Cutting Tool Material
    Cutting Tool Material
    • D P (5)
    • H W (106)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (272)
    • TAPER SHANK (7)
    System Size
    System Size
    • KM40TS (3)
    • KM50TS (4)
    Back-End Diameter
    Back-End Diameter
    • 19.05 mm(14)
    • 20.0 mm(8)
    • 25.401 mm(25)
    • 31.75 mm(46)
    • 32.0 mm(38)
    • 38.1 mm(35)
    • 40.0 mm(62)
    • 50.0 mm(41)
    • 50.801 mm(10)
    Back-End Diameter MinaBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.75 in(14)
    • 0.787 in(8)
    • 1.0 in(25)
    • 1.25 in(46)
    • 1.26 in(38)
    • 1.5 in(35)
    • 1.575 in(62)
    • 1.969 in(41)
    • 2.0 in(10)
    Back-End Diameter MinaBack-End Diameter Max
    No filters matching ""
    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberCódigo de catálogo ISOClasse  

    You are about to leave the Solution building process.

    Are you sure you want to leave?