Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho

Mandrilar de rotação

Selecionar filtros
Filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (680)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(680)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(680)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(680)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(680)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(680)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(680)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(680)
    • M Stainless Steel (563)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(563)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(563)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(563)
    • K Cast Iron (547)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(546)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(545)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(545)
    • N Non-Ferrous Materials (420)
      • N1
        Wrought Aluminum (392)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(402)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(150)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (420)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (414)
      • N6
        Carbon, Graphite Composites, CFRP (394)
      • N7
        MMC's (159)
    • S High-Temp Alloys (534)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(533)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(533)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(533)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(502)
    • H Hardened Materials (279)
      • H1
        Hardened Materials 44-48 HRC(279)
      • H2
        Hardened Materials 48-55 HRC(231)
      • H3
        Hardened Materials 56-60 HRC(154)
      • H4
        Hardened Materials >60 HRC(154)
    • C CFRP Materials (237)
      • C1
        CFRP, CFRP / CFRP (229)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (158)
    Selecione First Choice
    • IN (25)
    • US (1)
    Applications
    Applications
    • Blind & Cross Hole FinishingBlind & Cross Hole Finishing (71)
    • Blind Hole FinishingBlind Hole Finishing (133)
    • BoringBoring (2)
    • FacingFacing (2)
    • ID FacingID Facing (2)
    • Multiple Direction CuttingMultiple Direction Cutting (12)
    • ProfilingProfiling (1)
    • Through & Cross Hole FinishingThrough & Cross Hole Finishing (71)
    • Through Hole FinishingThrough Hole Finishing (133)
    • TurningTurning (2)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (260)
    • Lightly Interrupted Cut (406)
    • Smooth Cut (605)
    • Varying Depth of Cut (409)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (64)
    • 91.0 (8)
    • 92.0 (23)
    • 93.0 (1)
    • 95.0 (4)
    Tool Cutting Edge Angle MinaTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • E-BORE Boring Bar (21)
    • Whistle Notch 2 Front (12)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (3)
    • 1.0 (53)
    • 2.0 (370)
    • 3.0 (234)
    • 4.0 (89)
    Cutting Edges Per Insert MinaCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 0.36 in(1)
    • 0.395 in(1)
    • 0.496 in(3)
    • 0.574 in(1)
    • 0.576 in(1)
    • 0.592 in(1)
    • 0.65 in(2)
    • 0.669 in(3)
    • 0.754 in(3)
    • 0.756 in(3)
    • 0.776 in(7)
    • 0.811 in(1)
    • 0.816 in(2)
    • 0.929 in(2)
    • 0.931 in(3)
    • 0.935 in(1)
    • 0.971 in(3)
    • 1.0 in(1)
    • 1.047 in(2)
    • 1.053 in(1)
    • 1.161 in(1)
    • 1.205 in(1)
    • 1.209 in(6)
    • 1.358 in(1)
    • 1.437 in(1)
    • 1.524 in(3)
    • 1.635 in(1)
    • 1.772 in(1)
    • 1.792 in(6)
    • 1.891 in(1)
    • 2.0 in(1)
    • 2.086 in(1)
    • 2.087 in(1)
    • 2.165 in(1)
    • 2.197 in(1)
    • 2.265 in(1)
    • 2.273 in(1)
    • 2.282 in(2)
    • 2.386 in(1)
    • 2.441 in(1)
    • 2.479 in(1)
    • 2.676 in(1)
    • 2.677 in(1)
    • 2.695 in(1)
    • 2.873 in(1)
    • 3.071 in(1)
    • 3.089 in(1)
    • 3.15 in(1)
    • 3.161 in(1)
    • 3.269 in(1)
    • 3.561 in(2)
    • 3.661 in(2)
    • 3.858 in(2)
    • 4.449 in(2)
    • 4.843 in(1)
    • 5.63 in(1)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 9.15 mm(1)
    • 10.025 mm(1)
    • 12.601 mm(3)
    • 14.55 mm(1)
    • 14.601 mm(1)
    • 15.025 mm(1)
    • 16.5 mm(2)
    • 17.0 mm(3)
    • 19.151 mm(3)
    • 19.201 mm(3)
    • 19.701 mm(7)
    • 20.6 mm(1)
    • 20.701 mm(2)
    • 23.6 mm(2)
    • 23.651 mm(3)
    • 23.75 mm(1)
    • 24.651 mm(3)
    • 25.401 mm(1)
    • 26.6 mm(2)
    • 26.75 mm(1)
    • 29.5 mm(1)
    • 30.6 mm(1)
    • 30.701 mm(6)
    • 34.5 mm(1)
    • 36.5 mm(1)
    • 38.7 mm(3)
    • 41.5 mm(1)
    • 45.0 mm(1)
    • 45.5 mm(6)
    • 48.0 mm(1)
    • 50.801 mm(1)
    • 52.975 mm(1)
    • 53.0 mm(1)
    • 55.0 mm(1)
    • 55.801 mm(1)
    • 57.5 mm(1)
    • 57.7 mm(1)
    • 57.975 mm(2)
    • 60.6 mm(1)
    • 62.0 mm(1)
    • 62.975 mm(1)
    • 67.976 mm(1)
    • 68.0 mm(1)
    • 68.45 mm(1)
    • 72.976 mm(1)
    • 78.0 mm(1)
    • 78.45 mm(1)
    • 80.0 mm(1)
    • 80.301 mm(1)
    • 83.0 mm(1)
    • 90.45 mm(2)
    • 93.0 mm(2)
    • 98.0 mm(2)
    • 113.0 mm(2)
    • 123.0 mm(1)
    • 143.0 mm(1)
    Over All Length [L] MinaOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(3)
    • 0.001 in(37)
    • 0.002 in(48)
    • 0.004 in(158)
    • 0.007 in(27)
    • 0.008 in(231)
    • 0.015 in(20)
    • 0.016 in(389)
    • 0.031 in(366)
    • 0.047 in(19)
    • 0.063 in(3)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(3)
    • 0.025 mm(37)
    • 0.05 mm(48)
    • 0.1 mm(158)
    • 0.176 mm(27)
    • 0.2 mm(231)
    • 0.375 mm(20)
    • 0.4 mm(389)
    • 0.8 mm(366)
    • 1.201 mm(19)
    • 1.6 mm(3)
    Corner Radius MinaCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(730)
    Corner Chamfer MinaCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(730)
    Corner Chamfer MinaCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • HCK10 (39)
    • HK1500 (32)
    • HK35 (36)
    • HT2 (45)
    • HTX (44)
    • HWK15 (39)
    • K00379 (3)
    • K10M (42)
    • K10P (42)
    • K10U (38)
    • K15U (38)
    • K20K (42)
    • K25M (35)
    • K313 (145)
    • K420 (2)
    • K68 (141)
    • KB1345 (21)
    • KB1610 (129)
    • KB1630 (55)
    • KB5610 (128)
    • KB5625 (48)
    • KB5630 (48)
    • KB9610 (48)
    • KBH10 (45)
    • KBH20 (141)
    • KC250 (90)
    • KC5010 (197)
    • KC5025 (176)
    • KC525M (1)
    • KC5410 (151)
    • KC710 (91)
    • KC720 (135)
    • KC725M (2)
    • KC730 (184)
    • KC7310 (89)
    • KC732 (135)
    • KC8050 (135)
    • KC810 (135)
    • KC850 (155)
    • KC9010 (128)
    • KC9025 (135)
    • KC910 (135)
    • KC9105 (135)
    • KC9110 (135)
    • KC9120 (128)
    • KC9125 (135)
    • KC9225 (135)
    • KC9240 (135)
    • KC9240NEW (135)
    • KC9315 (135)
    • KC9320 (135)
    • KC9325 (135)
    • KC935 (137)
    • KC950 (128)
    • KC990 (128)
    • KCD25 (135)
    • KCK05 (139)
    • KCK05B (38)
    • KCK15 (145)
    • KCK15B (141)
    • KCK20 (151)
    • KCK20B (142)
    • KCM15 (140)
    • KCM15B (139)
    • KCM25 (147)
    • KCM25B (143)
    • KCM25S (37)
    • KCM35 (46)
    • KCM35B (4)
    • KCP05 (138)
    • KCP05B (3)
    • KCP10 (144)
    • KCP10B (146)
    • KCP20S (37)
    • KCP25 (158)
    • KCP25B (156)
    • KCP25C (180)
    • KCP30 (136)
    • KCP30B (10)
    • KCPK05 (90)
    • KCPK30 (2)
    • KCS10 (150)
    • KCS10B (150)
    • KCS25S (37)
    • KCU10 (176)
    • KCU10B (199)
    • KCU25 (158)
    • KCU25B (190)
    • KD050 (127)
    • KD081 (40)
    • KD100 (91)
    • KD105 (89)
    • KD120 (89)
    • KD1400 (143)
    • KD1405 (90)
    • KD1425 (142)
    • KN10S (37)
    • KT125 (90)
    • KT150 (90)
    • KT175 (127)
    • KT315 (158)
    • KT325 (45)
    • KTP10 (132)
    • KTP25S (38)
    • KU10 (128)
    • KU10T (135)
    • KU30T (135)
    • NL300 (7)
    • NL920 (7)
    • PB100 (29)
    • PB170 (36)
    • PB250 (36)
    • PB300 (29)
    • PD100 (39)
    • PD50 (36)
    • SP0PW3 (7)
    • SP4019 (7)
    • SPM5F2 (2)
    • SPMQMA (10)
    • SPN3W1 (3)
    • THM (39)
    • THM-X (39)
    • TN1000 (29)
    • TN10P (39)
    • TN10U (39)
    • TN15M (39)
    • TN15U (32)
    • TN2000 (39)
    • TN20K (39)
    • TN20P (39)
    • TN30M (39)
    • TN4000 (32)
    • TN5015 (39)
    • TN5020 (39)
    • TN5105 (39)
    • TN5120 (39)
    • TN6010 (10)
    • TN6025 (3)
    • TN7005 (3)
    • TN7010 (39)
    • TN7015 (39)
    • TN7025 (39)
    • TN7035 (39)
    • TN7105 (39)
    • TN7110 (39)
    • TN7115 (39)
    • TN7125 (39)
    • TN7135 (39)
    • TN8025 (39)
    • TTI15 (32)
    • TTM (3)
    • TTR (39)
    • TTS (32)
    • TTX (3)
    • W00342 (7)
    • WBH10C (32)
    • WBH10P (32)
    • WBH10U (32)
    • WBH20P (10)
    • WBH25P (32)
    • WBH30P (3)
    • WBK45U (10)
    • WDN00U (32)
    • WDN25U (32)
    • WK05CT (39)
    • WK15CT (39)
    • WK20CT (39)
    • WM15CT (39)
    • WM25CT (39)
    • WP15CT (39)
    • WP20TT (29)
    • WP25CT (39)
    • WP35CT (10)
    • WS10PT (39)
    • WS25PT (32)
    • WU05PT (39)
    • WU10HT (39)
    • WU10PR (4)
    • WU10PT (39)
    • WU20HT (29)
    • WU25PT (39)
    • YY3A00 (1)
    Hand Of Tool
    Hand Of Tool
    • R (33)
    Wiper Insert
    Wiper Insert
    • N (661)
    • Y (31)
    F Dimension
    F Dimension
    • 0.151 mm(1)
    • 2.825 mm(2)
    • 3.825 mm(1)
    • 4.75 mm(1)
    • 4.775 mm(3)
    • 5.75 mm(2)
    • 5.775 mm(1)
    • 6.75 mm(2)
    • 6.775 mm(2)
    • 7.325 mm(1)
    • 7.75 mm(1)
    • 7.775 mm(2)
    • 9.775 mm(1)
    • 12.275 mm(1)
    F Dimension MinaF Dimension Max
    F Dimension
    F Dimension
    • 0.006 in(1)
    • 0.111 in(2)
    • 0.151 in(1)
    • 0.187 in(1)
    • 0.188 in(3)
    • 0.226 in(2)
    • 0.227 in(1)
    • 0.266 in(2)
    • 0.267 in(2)
    • 0.289 in(1)
    • 0.305 in(1)
    • 0.306 in(2)
    • 0.385 in(1)
    • 0.483 in(1)
    F Dimension MinaF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 2.0 mm(1)
    • 4.0 mm(1)
    • 6.0 mm(4)
    • 8.0 mm(2)
    • 8.5 mm(2)
    • 10.0 mm(4)
    • 11.0 mm(2)
    • 12.0 mm(3)
    • 13.5 mm(2)
    • 14.0 mm(4)
    • 15.0 mm(1)
    • 16.0 mm(4)
    • 19.0 mm(1)
    • 19.5 mm(1)
    • 20.0 mm(1)
    • 22.0 mm(1)
    • 22.5 mm(1)
    • 24.5 mm(1)
    • 25.0 mm(3)
    • 25.5 mm(2)
    • 29.0 mm(2)
    • 29.5 mm(2)
    • 33.5 mm(1)
    • 34.0 mm(2)
    • 36.0 mm(2)
    • 40.0 mm(1)
    • 40.5 mm(1)
    • 42.0 mm(1)
    • 43.0 mm(2)
    • 45.5 mm(1)
    • 47.0 mm(1)
    • 49.0 mm(1)
    • 50.0 mm(1)
    • 52.0 mm(2)
    • 53.0 mm(1)
    • 56.5 mm(1)
    • 60.0 mm(2)
    • 61.0 mm(1)
    • 65.0 mm(3)
    • 68.0 mm(1)
    • 76.0 mm(1)
    • 82.0 mm(1)
    • 97.0 mm(1)
    • 100.0 mm(2)
    • 103.5 mm(1)
    • 110.0 mm(1)
    • 125.0 mm(1)
    • 138.0 mm(3)
    • 200.0 mm(2)
    Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.079 in(1)
    • 0.157 in(1)
    • 0.237 in(4)
    • 0.315 in(2)
    • 0.335 in(2)
    • 0.394 in(4)
    • 0.433 in(2)
    • 0.473 in(3)
    • 0.531 in(2)
    • 0.551 in(4)
    • 0.591 in(1)
    • 0.63 in(4)
    • 0.748 in(1)
    • 0.768 in(1)
    • 0.787 in(1)
    • 0.866 in(1)
    • 0.886 in(1)
    • 0.965 in(1)
    • 0.984 in(3)
    • 1.004 in(2)
    • 1.143 in(2)
    • 1.161 in(2)
    • 1.319 in(1)
    • 1.339 in(2)
    • 1.417 in(2)
    • 1.575 in(1)
    • 1.594 in(1)
    • 1.655 in(1)
    • 1.693 in(2)
    • 1.792 in(1)
    • 1.85 in(1)
    • 1.929 in(1)
    • 1.969 in(1)
    • 2.047 in(2)
    • 2.087 in(1)
    • 2.224 in(1)
    • 2.362 in(2)
    • 2.402 in(1)
    • 2.559 in(3)
    • 2.677 in(1)
    • 2.992 in(1)
    • 3.228 in(1)
    • 3.819 in(1)
    • 3.938 in(2)
    • 4.075 in(1)
    • 4.331 in(1)
    • 4.921 in(1)
    • 5.433 in(3)
    • 7.875 in(2)
    Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 0.276 in(1)
    • 0.315 in(2)
    • 0.354 in(1)
    • 0.374 in(1)
    • 0.394 in(2)
    • 0.453 in(1)
    • 0.473 in(5)
    • 0.551 in(4)
    • 0.572 in(1)
    • 0.63 in(4)
    • 0.65 in(1)
    • 0.669 in(1)
    • 0.768 in(1)
    • 0.787 in(4)
    • 0.886 in(1)
    • 0.906 in(1)
    • 0.984 in(1)
    • 1.004 in(1)
    • 1.024 in(1)
    • 1.181 in(2)
    • 1.319 in(1)
    • 1.457 in(2)
    • 1.614 in(1)
    • 1.713 in(1)
    • 1.732 in(1)
    • 2.087 in(1)
    • 2.126 in(1)
    • 2.283 in(1)
    • 2.559 in(1)
    • 2.598 in(2)
    • 3.031 in(1)
    • 3.269 in(1)
    • 3.938 in(1)
    • 4.016 in(1)
    • 4.055 in(1)
    • 5.118 in(1)
    • 5.984 in(1)
    • 8.071 in(2)
    • 40.158 in(2)
    Maximum Axial Groove Diameter MinaMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 7.0 mm(1)
    • 8.0 mm(2)
    • 9.0 mm(1)
    • 9.5 mm(1)
    • 10.0 mm(2)
    • 11.5 mm(1)
    • 12.0 mm(5)
    • 14.0 mm(4)
    • 14.5 mm(1)
    • 16.0 mm(4)
    • 16.5 mm(1)
    • 17.0 mm(1)
    • 19.5 mm(1)
    • 20.0 mm(4)
    • 22.5 mm(1)
    • 23.0 mm(1)
    • 25.0 mm(1)
    • 25.5 mm(1)
    • 26.0 mm(1)
    • 30.0 mm(2)
    • 33.5 mm(1)
    • 37.0 mm(2)
    • 41.0 mm(1)
    • 43.5 mm(1)
    • 44.0 mm(1)
    • 53.0 mm(1)
    • 54.0 mm(1)
    • 58.0 mm(1)
    • 65.0 mm(1)
    • 66.0 mm(2)
    • 77.0 mm(1)
    • 83.0 mm(1)
    • 100.0 mm(1)
    • 102.0 mm(1)
    • 103.0 mm(1)
    • 130.0 mm(1)
    • 152.0 mm(1)
    • 205.0 mm(2)
    • 1020.0 mm(2)
    Maximum Axial Groove Diameter MinaMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (2)
    • E (31)
    Rake Angle Style
    Rake Angle Style
    • NEGATIVE-ZERO (21)
    • NEUTRAL (ZERO) (11)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.562 in(1)
    • 0.787 in(1)
    • 0.803 in(1)
    • 0.854 in(1)
    • 0.906 in(1)
    • 1.041 in(1)
    • 1.102 in(1)
    • 1.104 in(1)
    • 1.181 in(1)
    • 1.201 in(1)
    • 1.28 in(1)
    • 1.298 in(1)
    • 1.338 in(1)
    • 1.415 in(1)
    • 1.516 in(1)
    • 1.573 in(1)
    • 1.574 in(1)
    • 1.693 in(1)
    • 1.695 in(1)
    • 1.907 in(1)
    • 2.165 in(2)
    • 2.277 in(1)
    • 2.362 in(2)
    • 2.757 in(2)
    • 2.953 in(2)
    • 3.543 in(2)
    • 3.938 in(1)
    • 4.724 in(1)
    Maximum Bore Depth MinaMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 14.275 mm(1)
    • 20.0 mm(1)
    • 20.401 mm(1)
    • 21.701 mm(1)
    • 23.0 mm(1)
    • 26.451 mm(1)
    • 28.0 mm(1)
    • 28.05 mm(1)
    • 30.0 mm(1)
    • 30.5 mm(1)
    • 32.5 mm(1)
    • 32.975 mm(1)
    • 33.975 mm(1)
    • 35.95 mm(1)
    • 38.5 mm(1)
    • 39.95 mm(1)
    • 39.975 mm(1)
    • 43.0 mm(1)
    • 43.051 mm(1)
    • 48.426 mm(1)
    • 55.0 mm(2)
    • 57.825 mm(1)
    • 60.0 mm(2)
    • 70.0 mm(2)
    • 75.0 mm(2)
    • 90.0 mm(2)
    • 100.0 mm(1)
    • 120.0 mm(1)
    Maximum Bore Depth MinaMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (25)
    frontEnd
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (515)
    • T-TRIANGLE 60 (240)
    • W-TRIGON 80 (4)
    • X-TRIGON 82 (1)
    Cartridge Size
    Cartridge Size
    • 1A. (1)
    • 1B. (1)
    • 1C. (1)
    • 1D. (1)
    • 1E. (1)
    • 1F. (1)
    • 1L. (1)
    • 1W (1)
    • 1X (1)
    • 1Y (1)
    • 2A. (1)
    • 2B. (1)
    • 2C. (1)
    • 2D. (1)
    • 2E. (1)
    • 2F. (1)
    • 2L. (3)
    • 2W (1)
    • 2X (1)
    • 2Y (1)
    • 3A. (1)
    • 3B. (1)
    • 3C. (1)
    • 3D. (1)
    • 3E. (1)
    • 3F. (2)
    • 3L. (1)
    • 3W (1)
    • 3X (1)
    • 3Y (1)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.138 in(1)
    • 0.157 in(2)
    • 0.177 in(1)
    • 0.187 in(1)
    • 0.197 in(2)
    • 0.226 in(1)
    • 0.237 in(5)
    • 0.276 in(4)
    • 0.286 in(1)
    • 0.315 in(4)
    • 0.325 in(1)
    • 0.335 in(1)
    • 0.384 in(1)
    • 0.394 in(4)
    • 0.443 in(1)
    • 0.492 in(1)
    • 0.502 in(1)
    • 0.591 in(1)
    Maximum Cutting Depth MinaMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 3.5 mm(1)
    • 4.0 mm(2)
    • 4.5 mm(1)
    • 4.75 mm(1)
    • 5.0 mm(2)
    • 5.75 mm(1)
    • 6.0 mm(5)
    • 7.0 mm(4)
    • 7.25 mm(1)
    • 8.0 mm(4)
    • 8.25 mm(1)
    • 8.5 mm(1)
    • 9.75 mm(1)
    • 10.0 mm(4)
    • 11.25 mm(1)
    • 12.5 mm(1)
    • 12.75 mm(1)
    • 15.0 mm(1)
    Maximum Cutting Depth MinaMaximum Cutting Depth Max
    Gage Length
    Gage Length
    • 0.492 in(1)
    • 0.576 in(1)
    • 0.63 in(3)
    • 0.886 in(1)
    • 1.161 in(1)
    • 1.181 in(1)
    • 1.28 in(1)
    • 1.571 in(2)
    • 1.575 in(3)
    • 1.581 in(1)
    • 1.614 in(2)
    • 1.673 in(1)
    • 1.772 in(1)
    • 1.827 in(1)
    • 1.891 in(1)
    • 1.969 in(6)
    • 2.035 in(1)
    • 2.307 in(1)
    • 2.358 in(1)
    • 2.362 in(5)
    • 2.368 in(1)
    • 2.677 in(1)
    • 2.753 in(1)
    • 2.757 in(5)
    • 2.835 in(2)
    • 2.953 in(3)
    • 2.992 in(2)
    • 3.15 in(1)
    • 3.228 in(1)
    • 3.307 in(1)
    • 3.346 in(5)
    • 3.362 in(1)
    • 3.386 in(3)
    • 3.543 in(2)
    • 3.701 in(1)
    • 3.758 in(1)
    • 3.938 in(8)
    • 4.016 in(2)
    • 4.094 in(2)
    • 4.331 in(5)
    • 4.488 in(1)
    • 4.567 in(1)
    • 4.724 in(1)
    • 4.898 in(1)
    • 5.118 in(2)
    • 5.236 in(1)
    • 5.433 in(2)
    • 5.827 in(1)
    • 5.984 in(1)
    • 6.299 in(1)
    Gage Length
    Gage Length
    • 100 mm(8)
    • 50 mm(6)
    • 110 mm(5)
    • 60 mm(5)
    • 70 mm(5)
    • 85 mm(5)
    • 16 mm(3)
    • 40 mm(3)
    • 75 mm(3)
    • 86 mm(3)
    • 102 mm(2)
    • 104 mm(2)
    • 130 mm(2)
    • 138 mm(2)
    • 41 mm(2)
    • 72 mm(2)
    • 76 mm(2)
    • 90 mm(2)
    • 114 mm(1)
    • 116 mm(1)
    • 120 mm(1)
    • 133 mm(1)
    • 148 mm(1)
    • 152 mm(1)
    • 160 mm(1)
    • 30 mm(1)
    • 45 mm(1)
    • 48 mm(1)
    • 68 mm(1)
    • 80 mm(1)
    • 82 mm(1)
    • 84 mm(1)
    • 94 mm(1)
    • 12.5 mm(1)
    • 14.601 mm(1)
    • 22.5 mm(1)
    • 29.5 mm(1)
    • 32.5 mm(1)
    • 39.901 mm(2)
    • 40.151 mm(1)
    • 42.5 mm(1)
    • 46.401 mm(1)
    • 51.7 mm(1)
    • 58.6 mm(1)
    • 59.901 mm(1)
    • 60.151 mm(1)
    • 69.9 mm(1)
    • 85.4 mm(1)
    • 95.45 mm(1)
    • 124.4 mm(1)
    insertGeometry
    Shape
    Shape
    • C-DIAMOND/RHOMBIC 80 (424)
    • T-TRIANGLE 60 (238)
    • X-TRIGON 82 (1)
    Insert IC Size
    Insert IC Size
    • 3.975 mm(52)
    • 5.551 mm(46)
    • 6.351 mm(276)
    • 9.525 mm(279)
    • 12.701 mm(7)
    Insert IC Size MinaInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.156 in(52)
    • 0.219 in(46)
    • 0.25 in(276)
    • 0.375 in(279)
    • 0.5 in(7)
    Insert IC Size MinaInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 3.45 mm(1)
    • 4.025 mm(51)
    • 5.551 mm(5)
    • 5.65 mm(12)
    • 6.45 mm(165)
    • 9.625 mm(29)
    • 9.675 mm(189)
    • 11.0 mm(111)
    • 12.9 mm(2)
    • 16.5 mm(90)
    • 22.0 mm(5)
    Cutting Edge Length MinaCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.136 in(1)
    • 0.158 in(51)
    • 0.219 in(5)
    • 0.222 in(12)
    • 0.254 in(165)
    • 0.379 in(29)
    • 0.381 in(189)
    • 0.433 in(111)
    • 0.508 in(2)
    • 0.65 in(90)
    • 0.866 in(5)
    Cutting Edge Length MinaCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • FP (66)
    • FW (25)
    • HP (70)
    • K (18)
    • LF (263)
    • MF (46)
    • MP (21)
    • UF (15)
    Cutting Tool Material
    Cutting Tool Material
    • B H (99)
    • B L (109)
    • C N (32)
    • D P (121)
    • H T (120)
    • H W (688)
    Tolerance Class
    Tolerance Class
    • G (263)
    • H (51)
    • M (346)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (12)
    System Size
    System Size
    • BT40 (2)
    • BT50 (4)
    • CV40 (2)
    • CV50 (4)
    • DV40 (2)
    • DV50 (4)
    • HSK100A (5)
    • HSK63A (21)
    • KM32TS (4)
    • KM40TS (6)
    • KM50 (2)
    • KM50TS (11)
    • KM63 (2)
    • KM63TS (3)
    • KM63XMZ (1)
    • KM80 (1)
    • KM80TS (5)
    • KR32 (11)
    • KR50 (6)
    • KR63 (3)
    • KR80 (3)
    Back-End Diameter
    Back-End Diameter
    • 10.0 mm(5)
    • 16.0 mm(38)
    • 18.0 mm(1)
    • 20.0 mm(1)
    • 25.0 mm(1)
    • 25.401 mm(1)
    • 31.75 mm(2)
    • 32.0 mm(4)
    • 40.0 mm(6)
    • 44.45 mm(6)
    • 50.0 mm(13)
    • 60.0 mm(6)
    • 63.0 mm(27)
    • 69.851 mm(12)
    • 80.0 mm(6)
    • 100.0 mm(5)
    Back-End Diameter MinaBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.394 in(5)
    • 0.63 in(38)
    • 0.709 in(1)
    • 0.787 in(1)
    • 0.984 in(1)
    • 1.0 in(1)
    • 1.25 in(2)
    • 1.26 in(4)
    • 1.575 in(6)
    • 1.75 in(6)
    • 1.969 in(13)
    • 2.362 in(6)
    • 2.48 in(27)
    • 2.75 in(12)
    • 3.15 in(6)
    • 3.938 in(5)
    Back-End Diameter MinaBack-End Diameter Max
    No filters matching ""
    Romicron™
    (808)

    Romicron™

    eBore™
    (96)

    eBore™

    Cápsula de mandrilamento fino
    (6)

    Cápsula de mandrilamento fino

    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    Select the destination where you want to move a.
    Novo Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Digite um nome válido
    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberCódigo de catálogo ISOClasse  

    You are about to leave the Solution building process.

    Are you sure you want to leave?