Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho

5720 Series • Two Cutting Edges • Ap1 max 16mm

Selecionar filtros
Filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • K Cast Iron (46)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(46)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(46)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(46)
    • N Non-Ferrous Materials (46)
      • N1
        Wrought Aluminum (46)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(46)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(46)
    Applications
    Applications
    • Face MillingFace Milling (29)
    • PocketPocket (4)
    • Pocket HelicalPocket Helical (3)
    • Pocket MillingPocket Milling (29)
    • Profile MillingProfile Milling (29)
    • RampingRamping (29)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (29)
    • Shoulder MillingShoulder Milling (29)
    • Shoulder RoughingShoulder Roughing (29)
    • Shoulder Square EndShoulder Square End (29)
    • Slot MillingSlot Milling (25)
    • Slot SideSlot Side (25)
    • Slot Square EndSlot Square End (29)
    • Slot TSlot T (25)
    Cutting Diameter
    Cutting Diameter
    • 0.984 in(3)
    • 1.0 in(2)
    • 1.25 in(3)
    • 1.26 in(5)
    • 1.5 in(1)
    • 1.575 in(2)
    • 1.969 in(3)
    • 2.0 in(3)
    • 2.48 in(2)
    • 2.5 in(2)
    • 3.0 in(3)
    • 3.15 in(2)
    Cutting Diameter MinaCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 25.0 mm(3)
    • 25.401 mm(2)
    • 31.75 mm(3)
    • 32.0 mm(5)
    • 38.1 mm(1)
    • 40.0 mm(2)
    • 50.0 mm(3)
    • 50.801 mm(3)
    • 63.0 mm(2)
    • 63.5 mm(2)
    • 76.2 mm(3)
    • 80.0 mm(2)
    Cutting Diameter MinaCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 25.401 mm(1)
    • 38.1 mm(1)
    Maximum Cutting Diameter MinaMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 1.0 in(1)
    • 1.5 in(1)
    Maximum Cutting Diameter MinaMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 16.0 mm(31)
    Cutting Length MinaCutting Length Max
    Cutting Length
    Cutting Length
    • 0.63 in(31)
    Cutting Length MinaCutting Length Max
    Reach
    Reach
    • 1.575 in(3)
    • 1.772 in(5)
    • 1.967 in(1)
    • 1.969 in(11)
    • 2.0 in(2)
    • 2.75 in(1)
    • 2.953 in(7)
    • 3.0 in(1)
    Reach MinaReach Max
    Reach
    Reach
    • 40.0 mm(3)
    • 45.0 mm(5)
    • 49.95 mm(1)
    • 50.0 mm(11)
    • 50.801 mm(2)
    • 69.851 mm(1)
    • 75.0 mm(7)
    • 76.2 mm(1)
    Reach MinaReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (31)
    Tool Cutting Edge Angle MinaTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (16)
    • HSK (4)
    • Screw-On Connection (6)
    • Straight-Cylindrical (5)
    Number of Flutes
    Number of Flutes
    • 2 (8)
    • 3 (11)
    • 4 (8)
    • 5 (4)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(3)
    • 1.772 in(5)
    • 1.969 in(6)
    • 2.0 in(2)
    • 2.835 in(2)
    • 2.872 in(1)
    • 2.874 in(3)
    • 5.03 in(1)
    • 5.157 in(1)
    • 5.232 in(1)
    • 5.236 in(3)
    • 5.28 in(1)
    • 5.315 in(2)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(3)
    • 45.0 mm(5)
    • 50.0 mm(6)
    • 50.801 mm(2)
    • 72.0 mm(2)
    • 72.95 mm(1)
    • 73.0 mm(3)
    • 127.75 mm(1)
    • 131.0 mm(1)
    • 132.9 mm(1)
    • 133.0 mm(3)
    • 134.1 mm(1)
    • 135.0 mm(2)
    Over All Length [L] MinaOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.012 in(32)
    • 0.016 in(32)
    • 0.031 in(32)
    • 0.049 in(32)
    • 0.066 in(32)
    • 0.083 in(32)
    • 0.103 in(33)
    • 0.122 in(33)
    • 0.13 in(32)
    • 0.161 in(33)
    • 0.206 in(32)
    • 0.244 in(32)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.301 mm(32)
    • 0.4 mm(32)
    • 0.8 mm(32)
    • 1.25 mm(32)
    • 1.675 mm(32)
    • 2.1 mm(32)
    • 2.6 mm(33)
    • 3.1 mm(33)
    • 3.301 mm(32)
    • 4.101 mm(33)
    • 5.2 mm(32)
    • 6.2 mm(32)
    Corner Radius MinaCorner Radius Max
    application
    Hand Of Tool
    Hand Of Tool
    • R (31)
    Wiper Insert
    Wiper Insert
    • N (15)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 4.4 (2)
    • 4.6 (3)
    • 5.8 (2)
    • 5.9 (2)
    • 7.5 (2)
    • 7.6 (1)
    • 7.8 (4)
    • 7.9 (1)
    • 8.1 (1)
    • 11.4 (5)
    • 11.5 (3)
    • 14.5 (3)
    • 14.7 (2)
    Maximum Ramp Angle MinaMaximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.906 in(1)
    • 0.946 in(1)
    • 0.961 in(1)
    • 1.137 in(1)
    • 1.176 in(1)
    • 1.18 in(1)
    • 1.22 in(1)
    • 1.43 in(1)
    Neck Diameter MinaNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 23.0 mm(1)
    • 24.0 mm(1)
    • 24.401 mm(1)
    • 28.875 mm(1)
    • 29.875 mm(1)
    • 29.975 mm(1)
    • 31.0 mm(1)
    • 36.325 mm(1)
    Neck Diameter MinaNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • Z-PARALLELOGRAM 89.27 (15)
    Cutting Edge Length
    Cutting Edge Length
    • 16.25 mm(2)
    • 16.375 mm(7)
    • 16.401 mm(5)
    • 16.45 mm(1)
    Cutting Edge Length MinaCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.64 in(2)
    • 0.645 in(7)
    • 0.646 in(5)
    • 0.648 in(1)
    Cutting Edge Length MinaCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • 721 (15)
    Cutting Tool Material
    Cutting Tool Material
    • H W (15)
    Tolerance Class
    Tolerance Class
    • E (15)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (5)
    • SCREW-ON (6)
    • SHELL MILL (16)
    • TAPER SHANK (4)
    System Size
    System Size
    • HSK63A (4)
    Back-End Diameter
    Back-End Diameter
    • 12.701 mm(1)
    • 16.0 mm(1)
    • 19.05 mm(2)
    • 19.1 mm(1)
    • 21.0 mm(2)
    • 22.0 mm(4)
    • 25.0 mm(1)
    • 25.401 mm(6)
    • 27.0 mm(2)
    • 29.0 mm(4)
    • 31.75 mm(1)
    • 32.0 mm(2)
    • 63.0 mm(4)
    Back-End Diameter MinaBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(1)
    • 0.63 in(1)
    • 0.75 in(2)
    • 0.752 in(1)
    • 0.828 in(2)
    • 0.866 in(4)
    • 0.984 in(1)
    • 1.0 in(6)
    • 1.063 in(2)
    • 1.143 in(4)
    • 1.25 in(1)
    • 1.26 in(2)
    • 2.48 in(4)
    Back-End Diameter MinaBack-End Diameter Max
    No filters matching ""
    Cutters 5720 • Metric
    (17)

    Cutters 5720 • Metric

    Inserts 5720
    (15)

    Inserts 5720

    Cutters 5720 • Inch
    (14)

    Cutters 5720 • Inch

    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    Select the destination where you want to move a.
    Novo Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Digite um nome válido
    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberCódigo de catálogo ISOClasse  

    You are about to leave the Solution building process.

    Are you sure you want to leave?