KSSM™ 10 • Four Cutting Edges • Ap1 max 6mm

Selecionar filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (35)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(35)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(35)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(35)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(35)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(35)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(35)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(35)
    • M Stainless Steel (32)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(32)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(32)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(32)
    • K Cast Iron (35)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(35)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(35)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(35)
    • N Non-Ferrous Materials (18)
      • N1
        Wrought Aluminum (18)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(18)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(18)
    • S High-Temp Alloys (29)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(24)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(24)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(24)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(29)
    • H Hardened Materials (18)
      • H1
        Hardened Materials 44-48 HRC(18)
    Applications
    Applications
    • Face MillingFace Milling (16)
    • Shoulder MillingShoulder Milling (16)
    • Shoulder Square EndShoulder Square End (16)
    • Slot MillingSlot Milling (16)
    • Slot Square EndSlot Square End (16)
    Cutting Diameter
    Cutting Diameter
    • 0.75 in(1)
    • 0.984 in(1)
    • 1.0 in(1)
    • 1.25 in(1)
    • 1.26 in(1)
    • 1.5 in(2)
    • 1.575 in(1)
    • 1.969 in(1)
    • 2.0 in(1)
    • 2.48 in(1)
    • 2.5 in(1)
    • 3.0 in(1)
    • 3.15 in(1)
    • 3.938 in(1)
    • 4.0 in(1)
    Cutting Diameter MinaCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 19.05 mm(1)
    • 25.0 mm(1)
    • 25.401 mm(1)
    • 31.75 mm(1)
    • 32.0 mm(1)
    • 38.1 mm(2)
    • 40.0 mm(1)
    • 50.0 mm(1)
    • 50.801 mm(1)
    • 63.0 mm(1)
    • 63.5 mm(1)
    • 76.2 mm(1)
    • 80.0 mm(1)
    • 100.0 mm(1)
    • 101.601 mm(1)
    Cutting Diameter MinaCutting Diameter Max
    Cutting Length
    Cutting Length
    • 6.551 mm(4)
    • 6.575 mm(12)
    Cutting Length MinaCutting Length Max
    Cutting Length
    Cutting Length
    • 0.258 in(4)
    • 0.259 in(12)
    Cutting Length MinaCutting Length Max
    Reach
    Reach
    • 1.22 in(1)
    • 1.25 in(1)
    • 1.341 in(1)
    • 1.47 in(1)
    • 1.536 in(2)
    • 1.575 in(2)
    • 1.75 in(4)
    • 1.929 in(1)
    • 1.969 in(2)
    • 2.0 in(1)
    Reach MinaReach Max
    Reach
    Reach
    • 31.0 mm(1)
    • 31.75 mm(1)
    • 34.051 mm(1)
    • 37.35 mm(1)
    • 39.0 mm(2)
    • 40.0 mm(2)
    • 44.45 mm(4)
    • 49.0 mm(1)
    • 50.0 mm(2)
    • 50.801 mm(1)
    Reach MinaReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (16)
    Tool Cutting Edge Angle MinaTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (9)
    • Weldon (7)
    Number of Flutes
    Number of Flutes
    • 1 (1)
    • 10 (2)
    • 2 (2)
    • 3 (2)
    • 4 (3)
    • 5 (2)
    • 6 (2)
    • 8 (2)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.25 in(1)
    • 1.575 in(2)
    • 1.75 in(3)
    • 1.969 in(2)
    • 2.0 in(1)
    • 3.5 in(2)
    • 3.781 in(1)
    • 3.938 in(1)
    • 4.03 in(2)
    • 4.331 in(1)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 31.75 mm(1)
    • 40.0 mm(2)
    • 44.45 mm(3)
    • 50.0 mm(2)
    • 50.801 mm(1)
    • 88.9 mm(2)
    • 96.0 mm(1)
    • 100.0 mm(1)
    • 102.351 mm(2)
    • 110.0 mm(1)
    Over All Length [L] MinaOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(21)
    • 0.031 in(39)
    • 0.047 in(17)
    • 0.063 in(16)
    • 0.078 in(16)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(21)
    • 0.8 mm(39)
    • 1.201 mm(17)
    • 1.6 mm(16)
    • 1.975 mm(16)
    Corner Radius MinaCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC410M (18)
    • KC520M (19)
    • KC725M (22)
    • KCK15 (21)
    • KCK20B (19)
    • KCPK30 (21)
    • KCPM20 (18)
    • KCPM40 (18)
    • KCSM30 (16)
    • KTPK20 (17)
    Hand Of Tool
    Hand Of Tool
    • R (16)
    Wiper Insert
    Wiper Insert
    • N (29)
    frontEnd
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • S-SQUARE 90 (29)
    Insert IC Size
    Insert IC Size
    • 10.0 mm(29)
    Insert IC Size MinaInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.394 in(29)
    Insert IC Size MinaInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 10.0 mm(29)
    Cutting Edge Length MinaCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.394 in(29)
    Cutting Edge Length MinaCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GB2 (20)
    • LD2 (7)
    • LE (2)
    Cutting Tool Material
    Cutting Tool Material
    • H T (1)
    • H W (28)
    Tolerance Class
    Tolerance Class
    • C (9)
    • E (14)
    • P (6)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (7)
    • SHELL MILL (9)
    Back-End Diameter
    Back-End Diameter
    • 12.701 mm(1)
    • 19.05 mm(2)
    • 22.0 mm(2)
    • 25.0 mm(1)
    • 25.401 mm(3)
    • 27.0 mm(1)
    • 31.75 mm(2)
    • 32.0 mm(3)
    • 38.1 mm(1)
    Back-End Diameter MinaBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(1)
    • 0.75 in(2)
    • 0.866 in(2)
    • 0.984 in(1)
    • 1.0 in(3)
    • 1.063 in(1)
    • 1.25 in(2)
    • 1.26 in(3)
    • 1.5 in(1)
    Back-End Diameter MinaBack-End Diameter Max
    No filters matching ""
    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    Select the destination where you want to move a.
    Novo Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Código de catálogo ISO Classe  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)