Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho

Cutters Mill 1-10™ • Inch

Selecionar filtros
Filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (62)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(62)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(62)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(62)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(62)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(62)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(62)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(62)
    • M Stainless Steel (62)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(62)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(62)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(62)
    • K Cast Iron (62)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(62)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(62)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(62)
    • N Non-Ferrous Materials (62)
      • N1
        Wrought Aluminum (62)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(62)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(62)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (57)
    • S High-Temp Alloys (62)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(62)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(62)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(62)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(62)
    • H Hardened Materials (62)
      • H1
        Hardened Materials 44-48 HRC(62)
    Selecione First Choice
    • US (42)
    Applications
    Applications
    • Face MillingFace Milling (62)
    • PocketPocket (62)
    • Pocket HelicalPocket Helical (62)
    • Pocket MillingPocket Milling (62)
    • RampingRamping (62)
    • Shoulder MillingShoulder Milling (62)
    • Shoulder RoughingShoulder Roughing (62)
    • Shoulder Square EndShoulder Square End (62)
    • Slot MillingSlot Milling (36)
    • Slot Square EndSlot Square End (36)
    Cutting Diameter
    Cutting Diameter
    • 0.5 in(1)
    • 0.625 in(5)
    • 0.75 in(11)
    • 0.875 in(1)
    • 1.0 in(16)
    • 1.1 in(1)
    • 1.25 in(13)
    • 1.5 in(5)
    • 2.0 in(4)
    • 2.5 in(2)
    • 3.0 in(2)
    • 4.0 in(1)
    Cutting Diameter MinaCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 12.701 mm(1)
    • 15.875 mm(5)
    • 19.05 mm(11)
    • 22.225 mm(1)
    • 25.401 mm(16)
    • 27.951 mm(1)
    • 31.75 mm(13)
    • 38.1 mm(5)
    • 50.801 mm(4)
    • 63.5 mm(2)
    • 76.2 mm(2)
    • 101.601 mm(1)
    Cutting Diameter MinaCutting Diameter Max
    Cutting Length
    Cutting Length
    • 9.701 mm(1)
    • 9.75 mm(2)
    • 9.775 mm(1)
    • 9.826 mm(1)
    • 9.875 mm(7)
    • 9.9 mm(1)
    • 9.951 mm(10)
    • 10.0 mm(1)
    • 10.025 mm(12)
    • 10.05 mm(4)
    • 10.076 mm(1)
    • 10.101 mm(8)
    • 10.25 mm(1)
    • 18.675 mm(2)
    • 18.8 mm(1)
    • 18.925 mm(1)
    • 27.776 mm(1)
    • 36.0 mm(2)
    • 36.375 mm(1)
    • 44.325 mm(2)
    • 44.801 mm(2)
    Cutting Length MinaCutting Length Max
    Cutting Length
    Cutting Length
    • 0.382 in(1)
    • 0.384 in(2)
    • 0.385 in(1)
    • 0.387 in(1)
    • 0.389 in(7)
    • 0.39 in(1)
    • 0.392 in(10)
    • 0.394 in(1)
    • 0.395 in(12)
    • 0.396 in(4)
    • 0.397 in(1)
    • 0.398 in(8)
    • 0.404 in(1)
    • 0.735 in(2)
    • 0.74 in(1)
    • 0.745 in(1)
    • 1.094 in(1)
    • 1.417 in(2)
    • 1.432 in(1)
    • 1.745 in(2)
    • 1.764 in(2)
    Cutting Length MinaCutting Length Max
    Reach
    Reach
    • 0.8 in(1)
    • 0.987 in(1)
    • 0.999 in(1)
    • 1.0 in(3)
    • 1.053 in(2)
    • 1.1 in(6)
    • 1.239 in(1)
    • 1.25 in(13)
    • 1.393 in(1)
    • 1.5 in(3)
    • 1.575 in(6)
    • 1.589 in(2)
    • 1.6 in(7)
    • 1.614 in(2)
    • 1.75 in(2)
    • 1.79 in(1)
    • 1.889 in(1)
    • 1.901 in(2)
    • 2.0 in(3)
    • 2.091 in(2)
    • 2.4 in(2)
    Reach MinaReach Max
    Reach
    Reach
    • 20.326 mm(1)
    • 25.076 mm(1)
    • 25.375 mm(1)
    • 25.401 mm(3)
    • 26.75 mm(2)
    • 27.951 mm(6)
    • 31.475 mm(1)
    • 31.75 mm(13)
    • 35.35 mm(1)
    • 38.1 mm(3)
    • 40.0 mm(6)
    • 40.35 mm(2)
    • 40.651 mm(7)
    • 41.0 mm(2)
    • 44.45 mm(2)
    • 45.475 mm(1)
    • 47.975 mm(1)
    • 48.25 mm(2)
    • 50.801 mm(3)
    • 53.1 mm(2)
    • 60.95 mm(2)
    Reach MinaReach Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (13)
    • Screw-On Connection (10)
    • Straight-Cylindrical (26)
    • Weldon (13)
    Number of Flutes
    Number of Flutes
    • 1 (1)
    • 10 (1)
    • 2 (15)
    • 3 (17)
    • 4 (13)
    • 5 (8)
    • 6 (3)
    • 8 (3)
    • 9 (1)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (57)
    • 2.0 (62)
    Cutting Edges Per Insert MinaCutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(6)
    • 1.669 in(1)
    • 1.75 in(2)
    • 1.848 in(2)
    • 2.0 in(3)
    • 2.116 in(2)
    • 2.4 in(2)
    • 2.406 in(3)
    • 2.52 in(2)
    • 3.031 in(1)
    • 3.13 in(2)
    • 3.281 in(2)
    • 3.422 in(1)
    • 3.5 in(1)
    • 3.531 in(2)
    • 3.88 in(2)
    • 4.0 in(1)
    • 4.071 in(1)
    • 4.37 in(2)
    • 4.407 in(1)
    • 4.5 in(2)
    • 4.8 in(5)
    • 5.2 in(2)
    • 6.688 in(1)
    • 6.689 in(1)
    • 6.7 in(4)
    • 7.989 in(3)
    • 8.0 in(5)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(6)
    • 42.401 mm(1)
    • 44.45 mm(2)
    • 46.95 mm(2)
    • 50.801 mm(3)
    • 53.75 mm(2)
    • 60.95 mm(2)
    • 61.1 mm(3)
    • 64.0 mm(2)
    • 76.95 mm(1)
    • 79.5 mm(2)
    • 83.325 mm(2)
    • 86.926 mm(1)
    • 88.9 mm(1)
    • 89.676 mm(2)
    • 98.551 mm(2)
    • 101.601 mm(1)
    • 103.4 mm(1)
    • 111.0 mm(2)
    • 111.926 mm(1)
    • 114.301 mm(2)
    • 121.926 mm(5)
    • 132.076 mm(2)
    • 169.875 mm(1)
    • 169.9 mm(1)
    • 170.175 mm(4)
    • 202.925 mm(3)
    • 203.201 mm(5)
    Over All Length [L] MinaOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(57)
    • 0.016 in(57)
    • 0.031 in(57)
    • 0.039 in(57)
    • 0.047 in(57)
    • 0.063 in(57)
    • 0.079 in(57)
    • 0.094 in(57)
    • 0.122 in(62)
    • 0.157 in(62)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(57)
    • 0.4 mm(57)
    • 0.8 mm(57)
    • 1.0 mm(57)
    • 1.201 mm(57)
    • 1.6 mm(57)
    • 2.0 mm(57)
    • 2.375 mm(57)
    • 3.1 mm(62)
    • 4.0 mm(62)
    Corner Radius MinaCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (62)
    • KC410M (62)
    • KC422M (62)
    • KC510M (57)
    • KC520M (62)
    • KC522M (62)
    • KC725M (62)
    • KCK15 (57)
    • KCK20B (57)
    • KCKP10 (57)
    • KCPK30 (62)
    • KCPM20 (62)
    • KCPM40 (62)
    • KCSM30 (62)
    • KCSM40 (62)
    • KD1410 (57)
    Hand Of Tool
    Hand Of Tool
    • R (61)
    • R - Right Hand Helix/Flute (1)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.5 (1)
    • 0.75 (2)
    • 1.0 (2)
    • 1.5 (4)
    • 2.0 (6)
    • 2.5 (12)
    • 3.0 (2)
    • 3.25 (1)
    • 4.0 (14)
    • 5.0 (1)
    • 5.25 (1)
    • 6.5 (10)
    • 8.0 (1)
    • 9.5 (4)
    • 11.5 (1)
    Maximum Ramp Angle MinaMaximum Ramp Angle Max
    frontEnd
    Insert Shape
    Insert Shape
    • E-PARALLELOGRAM 70 (62)
    • X-PARALLELOGRAM 70 (62)
    • X-PARALLELOGRAM 75 (62)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (39)
    • SCREW-ON (10)
    • SHELL MILL (13)
    Back-End Diameter
    Back-End Diameter
    • 13.0 mm(1)
    • 15.875 mm(3)
    • 18.0 mm(2)
    • 19.0 mm(5)
    • 19.05 mm(21)
    • 21.0 mm(2)
    • 25.401 mm(13)
    • 29.0 mm(5)
    • 31.75 mm(9)
    • 38.1 mm(1)
    Back-End Diameter MinaBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.512 in(1)
    • 0.625 in(3)
    • 0.709 in(2)
    • 0.748 in(5)
    • 0.75 in(21)
    • 0.828 in(2)
    • 1.0 in(13)
    • 1.143 in(5)
    • 1.25 in(9)
    • 1.5 in(1)
    Back-End Diameter MinaBack-End Diameter Max
    No filters matching ""
    Mill 1-10™ • End Mill • Screw-On • Inch
    (8)

    Mill 1-10™ • End Mill • Screw-On • Inch

    Mill 1-10™ • End Mill • Cylindrical Shank • Inch
    (10)

    Mill 1-10™ • End Mill • Cylindrical Shank • Inch

    Mill 1-10™ • Helical End Mill • Weldon Shank • Inch
    (4)

    Mill 1-10™ • Helical End Mill • Weldon Shank • Inch

    Mill 1-10™ • End Mill • Long • Cylindrical Shank • For Corner Radius .122" (3.1mm) • Inch
    (5)

    Mill 1-10™ • End Mill • Long • Cylindrical Shank • For Corner Radius .122" (3.1mm) • Inch

    Mill 1-10™ • End Mill • Long • Cylindrical Shank • Inch
    (9)

    Mill 1-10™ • End Mill • Long • Cylindrical Shank • Inch

    Mill 1-10™ • Helical Shell Mill • Inch
    (4)

    Mill 1-10™ • Helical Shell Mill • Inch

    Mill 1-10™ • Shell Mill • Inch
    (9)

    Mill 1-10™ • Shell Mill • Inch

    Mill 1-10™ • Helical End Mill • Cylindrical Shank • Inch
    (2)

    Mill 1-10™ • Helical End Mill • Cylindrical Shank • Inch

    Mill 1-10™ • End Mill • Weldon Shank • Inch
    (9)

    Mill 1-10™ • End Mill • Weldon Shank • Inch

    Mill 1-10™ • Helical End Mill • Screw-On • Inch
    (2)

    Mill 1-10™ • Helical End Mill • Screw-On • Inch

    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    Select the destination where you want to move a.
    Novo Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Digite um nome válido
    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberCódigo de catálogo ISOClasse  

    You are about to leave the Solution building process.

    Are you sure you want to leave?