Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho

Modular Blades

Selecionar filtros
Filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (24)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(24)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(24)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(24)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(24)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(24)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(24)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(24)
    • M Stainless Steel (24)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(24)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(24)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(24)
    • K Cast Iron (24)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(24)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(24)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(24)
    • N Non-Ferrous Materials (24)
      • N1
        Wrought Aluminum (24)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(24)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(10)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (24)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (24)
      • N6
        Carbon, Graphite Composites, CFRP (24)
      • N7
        MMC's (10)
    • S High-Temp Alloys (24)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(24)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(24)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(24)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(24)
    • H Hardened Materials (24)
      • H1
        Hardened Materials 44-48 HRC(24)
      • H2
        Hardened Materials 48-55 HRC(24)
      • H3
        Hardened Materials 56-60 HRC(15)
      • H4
        Hardened Materials >60 HRC(15)
    Selecione First Choice
    • IN (2)
    Applications
    Applications
    • GroovingGrooving (24)
    • ID GroovingID Grooving (18)
    • Multiple Direction CuttingMultiple Direction Cutting (24)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (24)
    • Lightly Interrupted Cut (24)
    • Smooth Cut (24)
    • Varying Depth of Cut (24)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (6)
    Tool Cutting Edge Angle MinaTool Cutting Edge Angle Max
    Over All Length [L]
    Over All Length [L]
    • 2.111 in(5)
    • 2.156 in(8)
    • 2.19 in(2)
    • 2.343 in(1)
    • 2.347 in(5)
    • 2.352 in(1)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 53.625 mm(5)
    • 54.75 mm(8)
    • 55.625 mm(2)
    • 59.5 mm(1)
    • 59.625 mm(5)
    • 59.75 mm(1)
    Over All Length [L] MinaOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(9)
    • 0.016 in(21)
    • 0.031 in(17)
    • 0.034 in(2)
    • 0.039 in(2)
    • 0.041 in(2)
    • 0.047 in(11)
    • 0.048 in(2)
    • 0.06 in(4)
    • 0.063 in(4)
    • 0.079 in(2)
    • 0.08 in(2)
    • 0.094 in(2)
    • 0.098 in(4)
    • 0.099 in(4)
    • 0.119 in(5)
    • 0.12 in(5)
    • 0.125 in(5)
    • 0.156 in(2)
    • 0.157 in(2)
    • 0.158 in(2)
    • 0.187 in(4)
    • 0.188 in(4)
    • 0.197 in(4)
    • 0.198 in(4)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(9)
    • 0.4 mm(21)
    • 0.8 mm(17)
    • 0.851 mm(2)
    • 1.0 mm(2)
    • 1.05 mm(2)
    • 1.201 mm(11)
    • 1.225 mm(2)
    • 1.5 mm(4)
    • 1.526 mm(4)
    • 1.6 mm(4)
    • 2.0 mm(2)
    • 2.025 mm(2)
    • 2.375 mm(2)
    • 2.5 mm(4)
    • 2.526 mm(4)
    • 3.0 mm(5)
    • 3.026 mm(5)
    • 3.176 mm(5)
    • 3.975 mm(2)
    • 4.0 mm(2)
    • 4.025 mm(2)
    • 4.75 mm(4)
    • 4.775 mm(4)
    • 5.0 mm(4)
    • 5.025 mm(4)
    Corner Radius MinaCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K1025 (9)
    • K313 (24)
    • KB1630 (15)
    • KB5625 (15)
    • KBH20 (15)
    • KC5010 (24)
    • KC5025 (24)
    • KC9110 (24)
    • KC9125 (24)
    • KCK20 (21)
    • KCP10 (23)
    • KCP25 (24)
    • KCU10 (24)
    • KCU10B (24)
    • KCU25 (24)
    • KD1405 (10)
    • KMS (8)
    • KT315 (18)
    • KU10 (23)
    • KU30T (15)
    • KY3500 (21)
    • KYS30 (11)
    • SP88F8 (5)
    frontEnd
    Clamp Style
    Clamp Style
    • Y (6)
    Cutting Width
    Cutting Width
    • 0.079 in(2)
    • 0.084 in(2)
    • 0.094 in(1)
    • 0.095 in(1)
    • 0.097 in(1)
    • 0.098 in(1)
    • 0.104 in(1)
    • 0.119 in(4)
    • 0.12 in(4)
    • 0.122 in(4)
    • 0.123 in(4)
    • 0.125 in(4)
    • 0.13 in(4)
    • 0.157 in(2)
    • 0.161 in(2)
    • 0.162 in(2)
    • 0.187 in(2)
    • 0.193 in(2)
    • 0.197 in(4)
    • 0.199 in(4)
    • 0.201 in(4)
    • 0.202 in(4)
    • 0.237 in(5)
    • 0.239 in(5)
    • 0.241 in(5)
    • 0.25 in(5)
    • 0.256 in(5)
    • 0.312 in(2)
    • 0.313 in(2)
    • 0.315 in(2)
    • 0.317 in(2)
    • 0.319 in(2)
    • 0.32 in(2)
    • 0.375 in(4)
    • 0.382 in(4)
    • 0.394 in(4)
    • 0.396 in(4)
    • 0.399 in(4)
    Cutting Width MinaCutting Width Max
    Cutting Width
    Cutting Width
    • 2.0 mm(2)
    • 2.125 mm(2)
    • 2.375 mm(1)
    • 2.401 mm(1)
    • 2.475 mm(1)
    • 2.5 mm(1)
    • 2.625 mm(1)
    • 3.0 mm(4)
    • 3.051 mm(4)
    • 3.1 mm(4)
    • 3.125 mm(4)
    • 3.176 mm(4)
    • 3.301 mm(4)
    • 4.0 mm(2)
    • 4.101 mm(2)
    • 4.125 mm(2)
    • 4.75 mm(2)
    • 4.9 mm(2)
    • 5.0 mm(4)
    • 5.051 mm(4)
    • 5.101 mm(4)
    • 5.125 mm(4)
    • 6.0 mm(5)
    • 6.051 mm(5)
    • 6.125 mm(5)
    • 6.351 mm(5)
    • 6.5 mm(5)
    • 7.926 mm(2)
    • 7.95 mm(2)
    • 8.0 mm(2)
    • 8.05 mm(2)
    • 8.1 mm(2)
    • 8.125 mm(2)
    • 9.525 mm(4)
    • 9.701 mm(4)
    • 10.0 mm(4)
    • 10.05 mm(4)
    • 10.125 mm(4)
    Cutting Width MinaCutting Width Max
    Cartridge Size
    Cartridge Size
    • 50 (11)
    • 65 (13)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.551 in(9)
    • 0.748 in(2)
    • 0.787 in(5)
    • 0.866 in(2)
    • 1.024 in(6)
    Maximum Cutting Depth MinaMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 14.0 mm(9)
    • 19.0 mm(2)
    • 20.0 mm(5)
    • 22.0 mm(2)
    • 26.0 mm(6)
    Maximum Cutting Depth MinaMaximum Cutting Depth Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (15)
    • B L (15)
    • C N (21)
    • D P (10)
    • H T (18)
    • H W (24)
    No filters matching ""
    A4M-S-C
    (18)

    A4M-S-C

    A4M-M
    (6)

    A4M-M

    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    Select the destination where you want to move a.
    Novo Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Digite um nome válido
    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberCódigo de catálogo ISOClasse  

    You are about to leave the Solution building process.

    Are you sure you want to leave?