Country

Idioma

Unidade de medida

Produto semelhante ao:

voltar a | Modificar semelhante a

KDMB • Ball Nose Finisher • Necked End Mills • Steel Shank • Inch

Name: KDMB • Ball Nose Finisher • Necked End Mills • Steel Shank • Inch
SKU: 2878438
Rating: 0 (0 reviews)

Indexable Ball Nose Finisher

Número de material2878438

ID do catálogo ISOKDMB0750R689A075SNID do catálogo ANSIKDMB0750R689A075SN

KDMB - Ball Nose Finisher - Necked End Mills - Steel Shank - Inch 2878438 - Kennametal

Open expanded view

Representação genérica

Preço de tabela

$415.22/cada

Desconto

Seu preço

/cada

Em stockEste artigo já não está disponívelEntrega demorada

Entre em contacto com a nossa equipa Comercial para saber todas as suas opções de preços

Este artigo já não está disponível

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Fresamento de rampa: blank
Abertura de canal: ponta esférica
Fresamento lateral/fresamento de canto: ponta esférica
Fresamento de perfil 3D
Haste — Cilíndrica lisa
Fresamento de cavidade

Visão geral
Dados de aplicação
Transferências
Lado da máquina de peças compatíveis
Lado da peça de peças compatíveis
Peças de substituição
Revisão
Q&A

Métrico

Polegada

Número de material	2878438
ID do catálogo ISO	KDMB0750R689A075SN
ID do catálogo ANSI	KDMB0750R689A075SN
[D1] Effective Cutting Diameter	19.05 mm
[D1] Effective Cutting Diameter	.75 in
[D] Adapter / Shank / Bore Diameter	19.05 mm
[D] Adapter / Shank / Bore Diameter	.75 in
[D3] Neck Diameter	18.01 mm
[D3] Neck Diameter	.709 in
[L] Overall Length	175 mm
[L] Overall Length	6.89 in
[L2] Head Length	60 mm
[L2] Head Length	2.362 in
[AP1MAX] 1st Maximum Cutting Depth	9.525 mm
[AP1MAX] 1st Maximum Cutting Depth	.375 in
Number of Inserts	1
[Z] Number of Flutes	2
Coolant Supply	N
Maximum Ramping Angle	3
Max RPM	40000
Gage Insert	KDMB0750.
Weight Pounds	0.88

See all Product Variants

Materiais das peças

Steel
Stainless Steel
Cast Iron
Non-Ferrous
High-Temp Alloys
Hardened Materials

Usos e aplicações

Fresamento de rampa: blank
Abertura de canal: ponta esférica
Fresamento lateral/fresamento de canto: ponta esférica
Fresamento de perfil 3D
Haste — Cilíndrica lisa
Fresamento de cavidade

Características e benefícios

Cutting diameter ranges from .375–1.250".
Ball nose finishers for 3D milling applications.
Suitable for roughing and fi nishing operations.
High precision and runout accuracy.
Can be used with heat shrink technology, h6 shank tolerance.

Criar solução para calcular avanços e velocidade

Após criar uma solução basta escolher o ícone Avanços & Velocidades e o nosso sistema irá fornecer recomendações. Pode personalizar as informações adicionando a sua máquina e especificações ou fazer ajustes utilizando os controlos deslizantes.

Seleção de insertos

KDMB Ball Nose Platform • .250"

Grupo de material	Usinagem leve		Usinagem geral		Usinagem pesada
–	(Geometria leve)		–		(Geometria reforçada)
–	resistência ao desgaste				tenacidade
–	Geometria	Classe	Geometria	Classe	Geometria	Classe
P1–P2	.E..GP	KC515M	.E..GP	KC515M	.E..GP	KC515M
P3–P4	.E..GP	KC515M	.E..GP	KC515M	.E..GP	KC515M
P5–P6	.E..GP	KC515M	.E..GP	KC515M	.E..GP	KC515M
M1–M2	.E..GP	KC515M	.E..GP	KC515M	–	–
M3	.E..GP	KC515M	.E..GP	KC515M	–	–
K1–K2	.E..GP	KC515M	.E..GP	KC515M	–	–
K3	.E..GP	KC515M	.E..GP	KC515M	–	–
N1–N2	.E..LD	K115M	.E..LD	K115M	–	–
N3	.E..LD	K115M	.E..LD	K115M	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	–	–	.E..GP	KC515M	–	–
H1	.E..GP	KC515M	.E..GP	KC515M	–	–

KDMB Ball Nose Platform • .312"

Grupo de material	Usinagem leve		Usinagem geral		Usinagem pesada
–	(Geometria leve)		–		(Geometria reforçada)
–	resistência ao desgaste				tenacidade
–	Geometria	Classe	Geometria	Classe	Geometria	Classe
P1–P2	.E..GP	KC515M	.E..GP	KC515M	.E..GP	KC515M
P3–P4	.E..GP	KC505M	.E..GP	KC515M	.E..GP	KC515M
P5–P6	.E..GP	KC505M	.E..GP	KC515M	.E..GP	KC515M
M1–M2	.E..GP	KC515M	.E..GP	KC515M	–	–
M3	.E..GP	KC515M	.E..GP	KC515M	–	–
K1–K2	.E..GP	KC515M	–	–	–	–
K3	.E..GP	KC515M	–	–	–	–
N1–N2	.E..LD	K115M	.E..LD	K115M	–	–
N3	.E..LD	K115M	.E..LD	K115M	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	.E..LD	K115M	.E..GP	KC515M	–	–
H1	.E..GP	KC505M	.E..GP	KC505M	.E..GP	KC515M

KDMB Ball Nose Platform • .375"

Grupo de material	Usinagem leve		Usinagem geral		Usinagem pesada
–	(Geometria leve)		–		(Geometria reforçada)
–	resistência ao desgaste				tenacidade
–	Geometria	Classe	Geometria	Classe	Geometria	Classe
P1–P2	.E..GP	KC515M	.E..GP	KC515M	.E..GP	KC515M
P3–P4	.E..GP	KC505M	.E..GP	KC515M	.E..GP	KC515M
P5–P6	.E..GP	KC505M	.E..GP	KC515M	.E..GP	KC515M
M1–M2	.E..GP	KC515M	.E..GP	KC515M	–	–
M3	.E..GP	KC515M	.E..GP	KC515M	–	–
K1–K2	.E..GP	KC515M	.E..GP	KC515M	–	–
K3	.E..GP	KC515M	.E..GP	KC515M	–	–
N1–N2	.E..LD	K115M	.E..LD	K115M	–	–
N3	.E..LD	K115M	.E..LD	K115M	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	.E..LD	K115M	.E..GP	KC515M	–	–
H1	.E..GP	KC505M	.E..GP	KC505M	.E..GP	KC515M

KDMB Ball Nose Platform • .500"

Grupo de material	Usinagem leve		Usinagem geral		Usinagem pesada
–	(Geometria leve)		–		(Geometria reforçada)
–	resistência ao desgaste				tenacidade
–	Geometria	Classe	Geometria	Classe	Geometria	Classe
P1–P2	.E..GP	KC515M	.E..GP	KC515M	.E..HC	KC530M
P3–P4	.E..GP	KC505M	.E..GP	KC515M	.E..HC	KC530M
P5–P6	.E..GP	KC505M	.E..GP	KC515M	.E..HC	KC530M
M1–M2	.E..GP	KC515M	.E..HC	KC530M	.E..HC	KC530M
M3	.E..GP	KC515M	.E..HC	KC530M	.E..HC	KC530M
K1–K2	.E..GP	KC515M	.E..GN	KC515M	.E..GN	KC515M
K3	.E..GP	KC515M	.E..GN	KC515M	.E..GN	KC515M
N1–N2	.E..LD	K115M	.E..LD	K115M	–	–
N3	.E..LD	K115M	.E..LD	K115M	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	.E..LD	K115M	.E..GP	KC515M	.E..HC	KC530M
H1	.E..GP	KC505M	.E..GP	KC505M	.E..GN	KC515M

KDMB Ball Nose Platform • .625"

Grupo de material	Usinagem leve		Usinagem geral		Usinagem pesada
–	(Geometria leve)		–		(Geometria reforçada)
–	resistência ao desgaste				tenacidade
–	Geometria	Classe	Geometria	Classe	Geometria	Classe
P1–P2	.E..GP	KC515M	.E..GP	KC515M	.E..HC	KC530M
P3–P4	.E..GP	KC505M	.E..GP	KC515M	.E..HC	KC530M
P5–P6	.E..GP	KC505M	.E..GP	KC515M	.E..HC	KC530M
M1–M2	.E..GP	KC515M	.E..HC	KC530M	.E..HC	KC530M
M3	.E..GP	KC515M	.E..HC	KC530M	.E..HC	KC530M
K1–K2	.E..GP	KC515M	.E..GP	KC515M	–	–
K3	.E..GP	KC515M	.E..GP	KC515M	–	–
N1–N2	.E..LD	K115M	.E..LD	K115M	–	–
N3	.E..LD	K115M	.E..LD	K115M	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	.E..LD	K115M	.E..GP	KC515M	.E..HC	KC530M
H1	.E..GP	KC505M	.E..GP	KC505M	.E..GP	KC515M

KDMB Ball Nose Platform • .750"

Grupo de material	Usinagem leve		Usinagem geral		Usinagem pesada
–	(Geometria leve)		–		(Geometria reforçada)
–	resistência ao desgaste				tenacidade
–	Geometria	Classe	Geometria	Classe	Geometria	Classe
P1–P2	.E..GP	KC515M	.E..GP	KC515M	.E..HC	KC530M
P3–P4	.E..GP	KC505M	.E..GP	KC515M	.E..HC	KC530M
P5–P6	.E..GP	KC505M	.E..GP	KC515M	.E..HC	KC530M
M1–M2	.E..GP	KC515M	.E..HC	KC530M	.E..HC	KC530M
M3	.E..GP	KC515M	.E..HC	KC530M	.E..HC	KC530M
K1–K2	.E..GP	KC515M	.E..GN	KC515M	.E..GN	KC515M
K3	.E..GP	KC515M	.E..GN	KC515M	.E..GN	KC515M
N1–N2	.E..LD	K115M	.E..LD	K115M	–	–
N3	.E..LD	K115M	.E..LD	K115M	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	.E..LD	K115M	.E..GP	KC515M	.E..HC	KC530M
H1	.E..GP	KC505M	.E..GP	KC505M	.E..GN	KC515M

KDMB Ball Nose Platform • 1.00"

Grupo de material	Usinagem leve		Usinagem geral		Usinagem pesada
–	(Geometria leve)		–		(Geometria reforçada)
–	resistência ao desgaste				tenacidade
–	Geometria	Classe	Geometria	Classe	Geometria	Classe
P1–P2	.E..GP	KC515M	.E..GP	KC515M	.E..HC	KC530M
P3–P4	.E..GP	KC505M	.E..GP	KC515M	.E..HC	KC530M
P5–P6	.E..GP	KC505M	.E..GP	KC515M	.E..HC	KC530M
M1–M2	.E..GP	KC515M	.E..HC	KC530M	.E..HC	KC530M
M3	.E..GP	KC515M	.E..HC	KC530M	.E..HC	KC530M
K1–K2	.E..GP	KC515M	.E..GN	KC515M	.E..GN	KC515M
K3	.E..GP	KC515M	.E..GN	KC515M	.E..GN	KC515M
N1–N2	.E..LD	K115M	.E..LD	K115M	–	–
N3	.E..LD	K115M	.E..LD	K115M	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	.E..LD	K115M	.E..GP	KC515M	.E..HC	KC530M
H1	.E..GP	KC505M	.E..GP	KC505M	.E..GN	KC515M

KDMB Ball Nose Platform • 1.25"

Grupo de material	Usinagem leve		Usinagem geral		Usinagem pesada
–	(Geometria leve)		–		(Geometria reforçada)
–	resistência ao desgaste				tenacidade
–	Geometria	Classe	Geometria	Classe	Geometria	Classe
P1–P2	.E..GP	KC515M	.E..GP	KC515M	.E..GP	KC515M
P3–P4	.E..GP	KC505M	.E..GP	KC515M	.E..GP	KC515M
P5–P6	.E..GP	KC505M	.E..GP	KC515M	.E..GP	KC515M
M1–M2	.E..GP	KC515M	.E..GP	KC515M	–	–
M3	.E..GP	KC515M	.E..GP	KC515M	–	–
K1–K2	.E..GP	KC515M	–	–	–	–
K3	.E..GP	KC515M	–	–	–	–
N1–N2	.E..LD	K115M	.E..LD	K115M	–	–
N3	.E..LD	K115M	.E..LD	K115M	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	.E..LD	K115M	.E..GP	KC515M
H1	.E..GP	KC505M	.E..GP	KC505M	.E..GP	KC515M

Leia maisView Less

Avanços

KDMB Ball Nose • .250"

	Diâmetro de trabalho (Dw) à Profundidade de corte axial (ap)
D1 máx	0.125	0.050	0.025	0.013
0.250	0.250	0.200	0.150	0.109

At .125 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..LD
.E..GP	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..GP

At .050 Axial Depth of Cut (ap)

Usinagem leve

Usinagem geral

Usinagem pesada

At .025 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..LD
.E..GP	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..GP

At .013 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..LD
.E..GP	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..GP

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.006	.008	.015	.004	.006	.011	.004	.005	.010	.004	.005	.009	.004	.005	.009	.E..LD
.E..GP	.006	.008	.015	.004	.006	.011	.004	.005	.010	.004	.005	.009	.004	.005	.009	.E..GP

KDMB Ball Nose • .312"

	Diâmetro de trabalho (Dw) à Profundidade de corte axial (ap)
D1 máx	0.156	0.047	0.031	0.016
0.313	0.313	0.223	0.188	0.136

At .156 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..LD
.E..GP	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..GP

At .047 Axial Depth of Cut (ap)

Usinagem leve

Usinagem geral

Usinagem pesada

At .031 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..LD
.E..GP	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..GP

At .016 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..LD
.E..GP	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..GP

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..LD
.E..GP	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..GP

KDMB Ball Nose • .375"

	Diâmetro de trabalho (Dw) à Profundidade de corte axial (ap)
D1 máx	0.188	0.056	0.038	0.019
0.375	0.375	0.268	0.225	0.163

At .188 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..LD
.E..GP	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..GP

At .056 Axial Depth of Cut (ap)

Usinagem leve

Usinagem geral

Usinagem pesada

At .038 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..LD
.E..GP	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..GP

At .019 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..LD
.E..GP	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..GP

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..LD
.E..GP	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..GP

KDMB Ball Nose • .500"

	Diâmetro de trabalho (Dw) à Profundidade de corte axial (ap)
D1 máx	0.250	0.075	0.050	0.025
0.500	0.500	0.357	0.300	0.218

At .250 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..LD
.E..GP	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..GP
.E..GN	.007	.010	.018	.005	.008	.013	.004	.007	.011	.004	.006	.011	.004	.006	.011	.E..GN
.E..HC	.007	.014	.024	.005	.010	.018	.004	.009	.015	.004	.008	.014	.004	.008	.014	.E..HC

At .075 Axial Depth of Cut (ap)

Usinagem leve

Usinagem geral

Usinagem pesada

At .050 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..LD
.E..GP	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..GP
.E..GN	.016	.024	.042	.012	.017	.031	.010	.015	.026	.009	.014	.025	.009	.014	.024	.E..GN
.E..HC	.016	.032	.057	.012	.023	.041	.010	.020	.035	.009	.019	.033	.009	.018	.032	.E..HC

At .025 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..LD
.E..GP	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..GP
.E..GN	.009	.014	.025	.007	.011	.019	.006	.009	.016	.006	.009	.015	.006	.008	.015	.E..GN
.E..HC	.009	.019	.034	.007	.014	.025	.006	.012	.021	.006	.011	.020	.006	.011	.020	.E..HC

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..LD
.E..GP	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..GP
.E..GN	.011	.017	.030	.008	.013	.022	.007	.011	.019	.007	.010	.018	.007	.010	.018	.E..GN
.E..HC	.011	.023	.041	.008	.017	.030	.007	.015	.026	.007	.014	.024	.007	.013	.023	.E..HC

KDMB Ball Nose • .625"

	Diâmetro de trabalho (Dw) à Profundidade de corte axial (ap)
D1 máx	0.313	0.094	0.063	0.031
0.625	0.625	0.446	0.375	0.272

At .313 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..LD
.E..GP	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..GP
.E..HC	.007	.014	.024	.005	.010	.018	.004	.009	.015	.004	.008	.014	.004	.008	.014	.E..HC

At .094 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..LD
.E..GP	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..GP
.E..HC	.009	.019	.034	.007	.014	.025	.006	.012	.021	.006	.011	.020	.006	.011	.020	.E..HC

At .063 Axial Depth of Cut (ap)

Usinagem leve

Usinagem geral

Usinagem pesada

At .031 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..LD
.E..GP	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..GP
.E..HC	.016	.032	.057	.012	.023	.041	.010	.020	.035	.009	.019	.033	.009	.018	.032	.E..HC

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..LD
.E..GP	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..GP
.E..HC	.011	.023	.041	.008	.017	.030	.007	.015	.026	.007	.014	.024	.007	.013	.023	.E..HC

KDMB Ball Nose • .750"

	Diâmetro de trabalho (Dw) à Profundidade de corte axial (ap)
D1 máx	0.375	0.113	0.075	0.038
0.750	0.750	0.536	0.450	0.327

At .375 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..LD
.E..GP	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..GP
.E..GN	.007	.010	.018	.005	.008	.013	.004	.007	.011	.004	.006	.011	.004	.006	.011	.E..GN
.E..HC	.007	.014	.024	.005	.010	.018	.004	.009	.015	.004	.008	.014	.004	.008	.014	.E..HC

At .113 Axial Depth of Cut (ap)

Usinagem leve

Usinagem geral

Usinagem pesada

At .075 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..LD
.E..GP	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..GP
.E..GN	.009	.014	.025	.007	.011	.019	.006	.009	.016	.006	.009	.015	.006	.008	.015	.E..GN
.E..HC	.009	.019	.034	.007	.014	.025	.006	.012	.021	.006	.011	.020	.006	.011	.020	.E..HC

At .038 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..LD
.E..GP	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..GP
.E..GN	.016	.024	.042	.012	.017	.031	.010	.015	.026	.009	.014	.025	.009	.014	.024	.E..GN
.E..HC	.016	.032	.057	.012	.023	.041	.010	.020	.035	.009	.019	.033	.009	.018	.032	.E..HC

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..LD
.E..GP	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..GP
.E..GN	.011	.017	.030	.008	.013	.022	.007	.011	.019	.007	.010	.018	.007	.010	.018	.E..GN
.E..HC	.011	.023	.041	.008	.017	.030	.007	.015	.026	.007	.014	.024	.007	.013	.023	.E..HC

KDMB Ball Nose • 1.00"

	Diâmetro de trabalho (Dw) à Profundidade de corte axial (ap)
D1 máx	0.500	0.150	0.100	0.050
1.000	1.000	0.714	0.600	0.436

At .500 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..LD
.E..GP	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..GP
.E..GN	.007	.010	.018	.005	.008	.013	.004	.007	.011	.004	.006	.011	.004	.006	.011	.E..GN
.E..HC	.007	.014	.024	.005	.010	.018	.004	.009	.015	.004	.008	.014	.004	.008	.014	.E..HC

At .150 Axial Depth of Cut (ap)

Usinagem leve

Usinagem geral

Usinagem pesada

At .100 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..LD
.E..GP	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..GP
.E..GN	.009	.014	.025	.007	.011	.019	.006	.009	.016	.006	.009	.015	.006	.008	.015	.E..GN
.E..HC	.009	.019	.034	.007	.014	.025	.006	.012	.021	.006	.011	.020	.006	.011	.020	.E..HC

At .050 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..LD
.E..GP	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..GP
.E..GN	.016	.024	.042	.012	.017	.031	.010	.015	.026	.009	.014	.025	.009	.014	.024	.E..GN
.E..HC	.016	.032	.057	.012	.023	.041	.010	.020	.035	.009	.019	.033	.009	.018	.032	.E..HC

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..LD
.E..GP	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..GP
.E..GN	.011	.017	.030	.008	.013	.022	.007	.011	.019	.007	.010	.018	.007	.010	.018	.E..GN
.E..HC	.011	.023	.041	.008	.017	.030	.007	.015	.026	.007	.014	.024	.007	.013	.023	.E..HC

KDMB Ball Nose • 1.25"

	Diâmetro de trabalho (Dw) à Profundidade de corte axial (ap)
D1 máx	0.625	0.188	0.125	0.063
1.250	1.250	0.893	0.750	0.545

At .625 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..LD
.E..GP	.005	.007	.012	.004	.005	.009	.003	.004	.008	.003	.004	.007	.003	.004	.007	.E..GP

At .188 Axial Depth of Cut (ap)

Usinagem leve

Usinagem geral

Usinagem pesada

At .125 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..LD
.E..GP	.011	.016	.028	.008	.012	.020	.007	.010	.018	.007	.009	.016	.006	.009	.016	.E..GP

At .063 Axial Depth of Cut (ap)

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..LD
.E..GP	.008	.011	.020	.006	.008	.015	.005	.007	.013	.005	.007	.012	.005	.007	.012	.E..GP

Geometria do Inserto	Avanço por faca inicial recomendado (fz = mm/faca) em relação à % de engajamento radial (ae)															Geometria do Inserto
	10%			20%			30%			40%			50–100%
.E..LD	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..LD
.E..GP	.007	.009	.017	.005	.007	.012	.004	.006	.011	.004	.006	.010	.004	.006	.010	.E..GP

Leia maisView Less

Velocidades

Recommended Starting Speeds [SFM]

Grupo de material		K115M			KC505M			KC515M			KC530M
P	1	–	–	–	–	–	–	1080	960	840	900	780	660
	2	–	–	–	–	–	–	1020	900	780	780	660	540
	3	–	–	–	–	–	–	900	780	660	660	600	540
	4	–	–	–	1180	860	710	780	660	540	600	540	480
	5	–	–	–	1180	860	710	660	540	420	540	480	420
	6	–	–	–	1140	780	620	540	420	360	420	360	300
M	1	–	–	–	–	–	–	1080	900	780	900	720	600
	2	–	–	–	–	–	–	900	720	540	600	480	420
	3	–	–	–	–	–	–	720	600	480	480	420	360
K	1	720	600	480	–	–	–	1440	1080	720	–	–	–
	2	600	480	360	–	–	–	1080	840	600	–	–	–
	3	360	300	240	–	–	–	480	360	240	–	–	–
N	1–2	1440	1080	720	–	–	–	–	–	–	–	–	–
	3	960	720	600	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–
	4	300	230	160	–	–	–	–	–	–	260	200	170
H	1	–	–	–	860	670	550	550	400	310	–	–	–

Leia maisView Less

CAD Drawings Models

Can’t find the file type you’re looking for?

Product data

SDS

Fichas de dados de segurança

I have read and accepted the Terms & Conditions of use

Crie uma solução para encontrar as peças perfeitamente compatíveis para a sua ferramenta.

Nome do Produto

Número de material

ID do catálogo ISO

ID do catálogo ANSI

TG75 Series • Inch

1014030

75TG0750

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

TG100 Series • Inch

1014031

100TG0750

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

TG150 Series • Inch

1014032

150TG0750

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

DA Collets

1015088

180DA0750

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

DA Collets

1080626

180DAC0750

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

Hydraulic Sleeves • HC 1/2 - HC 1 1/4 • Inch with Inch Bores

1093533

12HC0750

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

Hydraulic Sleeves • HC 20M - HC 32M • Metric with Inch Bores

1093598

32HCM0750

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

TG75 Series • Inch

1105159

75TGC0750

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

HC-HSK Form A

1246534

HSK63AHC075400

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

HC-HSK Form A

1246567

HSK100AHC075425

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

Crie uma solução para encontrar as peças perfeitamente compatíveis para a sua ferramenta.

Nome do Produto

Número de material

ID do catálogo ISO

ID do catálogo ANSI

Grão

Inserts for KDMB • KDMB-LD • Metric

3964241

KDMB20M0ERLD

KNS10

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

Inserts for KDMB • KDMB-LD • Inch

4177655

KDMB0750M0ERLD

KNS10

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

Inserts for KDMB • KDMB-SF

6784056

KDMB20M0ERSF

KCPK10

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

Inserts for KDMB • KDMB-GC

6784081

KDMB0750M0ERGC

KCPH15

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

Inserts for KDMB • KDMB-GN • Inch

6784082

KDMB0750M0ERGN

KCPK10

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

Inserts for KDMB • KDMB-GP • Inch

6784083

KDMB0750M0ERGP

KCPK10

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

Inserts for KDMB • KDMB-HC • Inch

6784084

KDMB0750M0ERHC

KCPK25

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

Inserts for KDMB • KDMB-GN • Metric

6784112

KDMB20M0ERGN

KCPK10

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

Inserts for KDMB • KDMB-GN • Metric

6784113

KDMB20M0ERGN

KCU15

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

Inserts for KDMB • KDMB-GP • Metric

6784114

KDMB20M0ERGP

KCPK10

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

Nome do Produto

Número de material

ID do catálogo ISO

ID do catálogo ANSI

CHAVE - KT-20

1022703

KT20

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

PARAFUSO

1921715

193.391

Preço de tabela

/cada

Desconto

Seu preço

/cada

Qtd

Em stockEste artigo já não está disponívelEntrega demorada

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Sugestões de produtos

Product Family suggestions

Notificações

Produto semelhante ao:

KDMB • Ball Nose Finisher • Necked End Mills • Steel Shank • Inch

Indexable Ball Nose Finisher

Número de material2878438

ID do catálogo ISOKDMB0750R689A075SNID do catálogo ANSIKDMB0750R689A075SN

Sending to {{cadTool}} in progress...

Materiais das peças

Usos e aplicações

Características e benefícios

Seleção de insertos

KDMB Ball Nose Platform • .250"

KDMB Ball Nose Platform • .312"

KDMB Ball Nose Platform • .375"

KDMB Ball Nose Platform • .500"

KDMB Ball Nose Platform • .625"

KDMB Ball Nose Platform • .750"

KDMB Ball Nose Platform • 1.00"

KDMB Ball Nose Platform • 1.25"

Avanços

KDMB Ball Nose • .250"

At .125 Axial Depth of Cut (ap)

At .050 Axial Depth of Cut (ap)

At .025 Axial Depth of Cut (ap)

At .013 Axial Depth of Cut (ap)

KDMB Ball Nose • .312"

At .156 Axial Depth of Cut (ap)

At .047 Axial Depth of Cut (ap)

At .031 Axial Depth of Cut (ap)

At .016 Axial Depth of Cut (ap)

KDMB Ball Nose • .375"

At .188 Axial Depth of Cut (ap)

At .056 Axial Depth of Cut (ap)

At .038 Axial Depth of Cut (ap)

At .019 Axial Depth of Cut (ap)

KDMB Ball Nose • .500"

At .250 Axial Depth of Cut (ap)

At .075 Axial Depth of Cut (ap)

At .050 Axial Depth of Cut (ap)

At .025 Axial Depth of Cut (ap)

KDMB Ball Nose • .625"

At .313 Axial Depth of Cut (ap)

At .094 Axial Depth of Cut (ap)

At .063 Axial Depth of Cut (ap)

At .031 Axial Depth of Cut (ap)

KDMB Ball Nose • .750"

At .375 Axial Depth of Cut (ap)

At .113 Axial Depth of Cut (ap)

At .075 Axial Depth of Cut (ap)

At .038 Axial Depth of Cut (ap)

KDMB Ball Nose • 1.00"

At .500 Axial Depth of Cut (ap)

At .150 Axial Depth of Cut (ap)

At .100 Axial Depth of Cut (ap)

At .050 Axial Depth of Cut (ap)

KDMB Ball Nose • 1.25"

At .625 Axial Depth of Cut (ap)

At .188 Axial Depth of Cut (ap)

At .125 Axial Depth of Cut (ap)

At .063 Axial Depth of Cut (ap)

Velocidades

Recommended Starting Speeds [SFM]

The following files are available