KenTIP
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (9)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(9)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(9)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(9)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(9)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(9)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(9)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(9)
- M Stainless Steel (3)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(3)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3)
- K Cast Iron (9)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(9)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(9)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(9)
- N Non-Ferrous Materials (3)
- N1Wrought Aluminum (3)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3)
- N3High-Silicon Aluminum Alloys Si >12.2%(3)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3)
- N6Carbon, Graphite Composites, CFRP (3)
Cutting Diameter
Cutting Diameter
- 0.313 in(1)
- 0.315 in(1)
- 0.319 in(1)
- 0.322 in(1)
- 0.323 in(1)
- 0.327 in(1)
- 0.328 in(1)
- 0.331 in(1)
- 0.332 in(1)
- 0.335 in(2)
- 0.336 in(2)
- 0.339 in(2)
- 0.343 in(2)
- 0.345 in(2)
- 0.347 in(2)
- 0.349 in(2)
- 0.351 in(2)
- 0.374 in(1)
- 0.375 in(1)
- 0.376 in(1)
- 0.377 in(1)
- 0.378 in(1)
- 0.382 in(1)
- 0.386 in(1)
- 0.387 in(1)
- 0.39 in(1)
- 0.391 in(1)
- 0.394 in(2)
- 0.395 in(2)
- 0.397 in(2)
- 0.398 in(2)
- 0.402 in(2)
- 0.404 in(2)
- 0.406 in(2)
- 0.408 in(2)
- 0.41 in(2)
- 0.414 in(2)
- 0.453 in(1)
- 0.457 in(1)
- 0.461 in(1)
- 0.465 in(1)
- 0.47 in(1)
- 0.473 in(1)
- 0.477 in(1)
- 0.48 in(1)
- 0.484 in(1)
- 0.488 in(1)
- 0.491 in(1)
- 0.551 in(3)
- 0.555 in(3)
- 0.559 in(3)
- 0.564 in(3)
- 0.568 in(3)
- 0.572 in(1)
- 0.576 in(1)
- 0.578 in(1)
- 0.579 in(1)
- 0.583 in(1)
- 0.587 in(1)
- 0.591 in(2)
- 0.594 in(2)
- 0.595 in(2)
- 0.598 in(2)
- 0.602 in(2)
- 0.605 in(2)
- 0.606 in(2)
- 0.609 in(2)
- 0.61 in(2)
- 0.614 in(2)
- 0.618 in(2)
- 0.622 in(2)
- 0.625 in(2)
- 0.628 in(2)
- 0.63 in(2)
- 0.631 in(2)
- 0.633 in(2)
- 0.634 in(2)
- 0.638 in(2)
- 0.641 in(2)
- 0.642 in(2)
- 0.646 in(2)
- 0.65 in(2)
- 0.654 in(2)
- 0.656 in(2)
- 0.657 in(2)
- 0.661 in(2)
- 0.664 in(2)
- 0.665 in(2)
- 0.669 in(1)
- 0.672 in(1)
- 0.673 in(1)
- 0.677 in(1)
- 0.681 in(1)
- 0.685 in(1)
- 0.689 in(1)
- 0.69 in(1)
- 0.694 in(1)
- 0.698 in(1)
- 0.702 in(1)
- 0.704 in(1)
- 0.705 in(1)
- 0.709 in(1)
- 0.713 in(1)
- 0.717 in(1)
- 0.719 in(1)
- 0.72 in(1)
- 0.724 in(1)
- 0.728 in(1)
- 0.732 in(1)
- 0.734 in(1)
- 0.736 in(1)
- 0.74 in(1)
- 0.744 in(1)
to
Cutting Diameter
Cutting Diameter
- 7.95 mm(1)
- 8.0 mm(1)
- 8.1 mm(1)
- 8.175 mm(1)
- 8.201 mm(1)
- 8.3 mm(1)
- 8.326 mm(1)
- 8.4 mm(1)
- 8.425 mm(1)
- 8.5 mm(2)
- 8.525 mm(2)
- 8.6 mm(2)
- 8.701 mm(2)
- 8.725 mm(2)
- 8.8 mm(2)
- 8.85 mm(2)
- 8.9 mm(2)
- 9.5 mm(1)
- 9.525 mm(1)
- 9.55 mm(1)
- 9.576 mm(1)
- 9.601 mm(1)
- 9.701 mm(1)
- 9.8 mm(1)
- 9.826 mm(1)
- 9.9 mm(1)
- 9.925 mm(1)
- 10.0 mm(2)
- 10.025 mm(2)
- 10.076 mm(2)
- 10.101 mm(2)
- 10.201 mm(2)
- 10.25 mm(2)
- 10.3 mm(2)
- 10.326 mm(2)
- 10.4 mm(2)
- 10.5 mm(2)
- 11.5 mm(1)
- 11.601 mm(1)
- 11.701 mm(1)
- 11.8 mm(1)
- 11.9 mm(1)
- 12.0 mm(1)
- 12.101 mm(1)
- 12.201 mm(1)
- 12.3 mm(1)
- 12.4 mm(1)
- 12.476 mm(1)
- 14.0 mm(3)
- 14.101 mm(3)
- 14.201 mm(3)
- 14.3 mm(3)
- 14.4 mm(3)
- 14.5 mm(1)
- 14.601 mm(1)
- 14.675 mm(1)
- 14.701 mm(1)
- 14.8 mm(1)
- 14.9 mm(1)
- 15.0 mm(2)
- 15.076 mm(2)
- 15.101 mm(2)
- 15.201 mm(2)
- 15.3 mm(2)
- 15.375 mm(2)
- 15.4 mm(2)
- 15.476 mm(2)
- 15.5 mm(2)
- 15.601 mm(2)
- 15.701 mm(2)
- 15.8 mm(2)
- 15.875 mm(2)
- 15.951 mm(2)
- 16.0 mm(2)
- 16.026 mm(2)
- 16.075 mm(2)
- 16.1 mm(2)
- 16.2 mm(2)
- 16.276 mm(2)
- 16.3 mm(2)
- 16.401 mm(2)
- 16.5 mm(2)
- 16.6 mm(2)
- 16.675 mm(2)
- 16.7 mm(2)
- 16.8 mm(2)
- 16.875 mm(2)
- 16.901 mm(2)
- 17.0 mm(1)
- 17.075 mm(1)
- 17.1 mm(1)
- 17.2 mm(1)
- 17.3 mm(1)
- 17.401 mm(1)
- 17.475 mm(1)
- 17.5 mm(1)
- 17.6 mm(1)
- 17.7 mm(1)
- 17.8 mm(1)
- 17.85 mm(1)
- 17.901 mm(1)
- 18.0 mm(1)
- 18.1 mm(1)
- 18.2 mm(1)
- 18.25 mm(1)
- 18.3 mm(1)
- 18.401 mm(1)
- 18.5 mm(1)
- 18.6 mm(1)
- 18.651 mm(1)
- 18.7 mm(1)
- 18.8 mm(1)
- 18.901 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 25.5 mm(1)
- 27.0 mm(1)
- 30.0 mm(1)
- 31.5 mm(1)
- 36.0 mm(2)
- 42.0 mm(1)
- 43.5 mm(2)
- 45.0 mm(1)
- 48.0 mm(2)
- 50.0 mm(1)
- 51.0 mm(1)
- 57.0 mm(1)
- 58.0 mm(1)
- 68.0 mm(1)
- 72.0 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 1.004 in(1)
- 1.063 in(1)
- 1.181 in(1)
- 1.24 in(1)
- 1.417 in(2)
- 1.655 in(1)
- 1.713 in(2)
- 1.772 in(1)
- 1.891 in(2)
- 1.969 in(1)
- 2.008 in(1)
- 2.244 in(1)
- 2.283 in(1)
- 2.677 in(1)
- 2.835 in(1)
to
Reach
Reach
- 1.606 in(1)
- 1.693 in(1)
- 1.862 in(1)
- 1.945 in(1)
- 2.193 in(1)
- 2.606 in(2)
- 2.618 in(1)
- 2.685 in(1)
- 2.85 in(2)
- 3.012 in(1)
to
Reach
Reach
- 40.801 mm(1)
- 43.0 mm(1)
- 47.301 mm(1)
- 49.401 mm(1)
- 55.7 mm(1)
- 66.2 mm(2)
- 66.5 mm(1)
- 68.2 mm(1)
- 72.4 mm(2)
- 76.5 mm(1)
to
Over All Length [L]
Over All Length [L]
- 3.15 in(1)
- 3.228 in(1)
- 3.583 in(1)
- 3.622 in(1)
- 3.701 in(1)
- 4.114 in(1)
- 4.213 in(1)
- 4.449 in(1)
- 4.646 in(2)
- 4.744 in(1)
- 4.764 in(2)
- 4.843 in(1)
- 5.118 in(1)
- 5.218 in(1)
- 5.551 in(1)
- 5.71 in(1)
to
Over All Length [L]
Over All Length [L]
- 80.0 mm(1)
- 82.0 mm(1)
- 91.0 mm(1)
- 92.0 mm(1)
- 94.0 mm(1)
- 104.5 mm(1)
- 107.0 mm(1)
- 113.0 mm(1)
- 118.0 mm(2)
- 120.5 mm(1)
- 121.0 mm(2)
- 123.0 mm(1)
- 130.0 mm(1)
- 132.5 mm(1)
- 141.0 mm(1)
- 145.0 mm(1)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC7315 (18)
- KC7320 (2)
- KC7410 (18)
- KCP15 (18)
- KCPM45 (18)
Front-End
Point Angle
Point Angle
- 140.0 (18)
- 180.0 (18)
to
Back-End
Back-End Diameter
Back-End Diameter
- 8.0 mm(1)
- 9.0 mm(2)
- 10.0 mm(1)
- 11.0 mm(2)
- 12.0 mm(1)
- 13.0 mm(1)
- 14.0 mm(1)
- 15.0 mm(4)
- 16.0 mm(2)
- 17.0 mm(1)
- 18.0 mm(2)
to
Back-End Diameter
Back-End Diameter
- 0.315 in(1)
- 0.354 in(2)
- 0.394 in(1)
- 0.433 in(2)
- 0.473 in(1)
- 0.512 in(1)
- 0.551 in(1)
- 0.591 in(4)
- 0.63 in(2)
- 0.669 in(1)
- 0.709 in(2)
to
No filters matching ""
