Inserts for Rodeka IC 12 RNPJ16-HD 5274722 RNPJ1605M0SHD

Feeds

At 8,00 Axial Depth of Cut (ap)

Insert Geometry	Programmed feed per tooth (fz) as a % of radial depth of cut (ae) of working diameter (dw)															Insert Geometry
	5%			10%			20%			30%			40%–100%
.E..LDJ	0,21	0,76	1,38	0,15	0,55	0,99	0,12	0,41	0,74	0,10	0,36	0,64	0,09	0,33	0,59	.E..LDJ
.E..LD	0,21	0,76	1,38	0,15	0,55	0,99	0,12	0,41	0,74	0,10	0,36	0,64	0,09	0,33	0,59	.E..LD
.S..GD	0,40	0,87	1,55	0,29	0,63	1,11	0,22	0,47	0,82	0,19	0,41	0,72	0,17	0,37	0,66	.S..GD
.S..HD	0,40	1,02	1,65	0,29	0,73	1,18	0,22	0,55	0,87	0,19	0,48	0,76	0,17	0,44	0,70	.S..HD

At 2,50 Axial Depth of Cut (ap)

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..LDJ	0,21	0,76	1,38	0,15	0,55	0,99	0,12	0,41	0,74	0,10	0,36	0,64	0,09	0,33	0,59	.E..LDJ
.E..LD	0,21	0,76	1,38	0,15	0,55	0,99	0,12	0,41	0,74	0,10	0,36	0,64	0,09	0,33	0,59	.E..LD
.S..GD	0,40	0,87	1,55	0,29	0,63	1,11	0,22	0,47	0,82	0,19	0,41	0,72	0,17	0,37	0,66	.S..GD
.S..HD	0,40	1,02	1,65	0,29	0,73	1,18	0,22	0,55	0,87	0,19	0,48	0,76	0,17	0,44	0,70	.S..HD

At 1,50 Axial Depth of Cut (ap)

Insert Geometry	Programmed feed per tooth (fz) as a % of radial depth of cut (ae) of working diameter (dw)															Insert Geometry
	5%			10%			20%			30%			40%–100%
.E..LDJ	0,26	0,92	1,67	0,19	0,66	1,19	0,14	0,49	0,89	0,12	0,43	0,77	0,11	0,39	0,71	.E..LDJ
.E..LD	0,26	0,92	1,67	0,19	0,66	1,19	0,14	0,49	0,89	0,12	0,43	0,77	0,11	0,39	0,71	.E..LD
.S..GD	0,49	1,05	1,88	0,35	0,75	1,34	0,26	0,56	0,99	0,23	0,49	0,86	0,21	0,45	0,79	.S..GD
.S..HD	0,49	1,23	2,00	0,35	0,88	1,42	0,26	0,66	1,05	0,23	0,57	0,92	0,21	0,52	0,84	.S..HD

At 1,00 Axial Depth of Cut (ap)

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..LDJ	0,26	0,92	1,67	0,19	0,66	1,19	0,14	0,49	0,89	0,12	0,43	0,77	0,11	0,39	0,71	.E..LDJ
.E..LD	0,26	0,92	1,67	0,19	0,66	1,19	0,14	0,49	0,89	0,12	0,43	0,77	0,11	0,39	0,71	.E..LD
.S..GD	0,49	1,05	1,88	0,35	0,75	1,34	0,26	0,56	0,99	0,23	0,49	0,86	0,21	0,45	0,79	.S..GD
.S..HD	0,49	1,23	2,00	0,35	0,88	1,42	0,26	0,66	1,05	0,23	0,57	0,92	0,21	0,52	0,84	.S..HD

Light Machining

General Purpose

Heavy Machining

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Programmed feed per tooth (fz) as a % of radial depth of cut (ae) of working diameter (dw)															Insert Geometry
	5%			10%			20%			30%			40%–100%
.E..LDJ	0,17	0,61	1,10	0,12	0,44	0,79	0,09	0,33	0,59	0,08	0,29	0,51	0,07	0,26	0,47	.E..LDJ
.E..LD	0,17	0,61	1,10	0,12	0,44	0,79	0,09	0,33	0,59	0,08	0,29	0,51	0,07	0,26	0,47	.E..LD
.S..GD	0,32	0,70	1,24	0,23	0,50	0,89	0,18	0,38	0,66	0,15	0,33	0,58	0,14	0,30	0,53	.S..GD
.S..HD	0,32	0,81	1,32	0,23	0,59	0,94	0,18	0,44	0,70	0,15	0,38	0,61	0,14	0,35	0,56	.S..HD

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..LDJ	0,17	0,61	1,10	0,12	0,44	0,79	0,09	0,33	0,59	0,08	0,29	0,51	0,07	0,26	0,47	.E..LDJ
.E..LD	0,17	0,61	1,10	0,12	0,44	0,79	0,09	0,33	0,59	0,08	0,29	0,51	0,07	0,26	0,47	.E..LD
.S..GD	0,32	0,70	1,24	0,23	0,50	0,89	0,18	0,38	0,66	0,15	0,33	0,58	0,14	0,30	0,53	.S..GD
.S..HD	0,32	0,81	1,32	0,23	0,59	0,94	0,18	0,44	0,70	0,15	0,38	0,61	0,14	0,35	0,56	.S..HD

Insert Geometry	Programmed feed per tooth (fz) as a % of radial depth of cut (ae) of working diameter (dw)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..LDJ	0,12	0,44	0,80	0,09	0,32	0,57	0,07	0,24	0,43	0,06	0,21	0,37	0,05	0,19	0,34	.E..LDJ
.E..LD	0,12	0,44	0,80	0,09	0,32	0,57	0,07	0,24	0,43	0,06	0,21	0,37	0,05	0,19	0,34	.E..LD
.S..GD	0,23	0,50	0,89	0,17	0,36	0,64	0,13	0,27	0,48	0,11	0,24	0,42	0,10	0,22	0,38	.S..GD
.S..HD	0,23	0,59	0,95	0,17	0,43	0,68	0,13	0,32	0,51	0,11	0,28	0,44	0,10	0,25	0,41	.S..HD

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..LDJ	0,12	0,44	0,80	0,09	0,32	0,57	0,07	0,24	0,43	0,06	0,21	0,37	0,05	0,19	0,34	.E..LDJ
.E..LD	0,12	0,44	0,80	0,09	0,32	0,57	0,07	0,24	0,43	0,06	0,21	0,37	0,05	0,19	0,34	.E..LD
.S..GD	0,23	0,50	0,89	0,17	0,36	0,64	0,13	0,27	0,48	0,11	0,24	0,42	0,10	0,22	0,38	.S..GD
.S..HD	0,23	0,59	0,95	0,17	0,43	0,68	0,13	0,32	0,51	0,11	0,28	0,44	0,10	0,25	0,41	.S..HD

At .320 Axial Depth of Cut (ap)

Light Machining

General Purpose

Heavy Machining

At .100 Axial Depth of Cut (ap)

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..LDJ	.007	.024	.043	.005	.017	.031	.004	.013	.023	.003	.011	.020	.003	.010	.018	.E..LDJ
.E..LD	.007	.024	.043	.005	.017	.031	.004	.013	.023	.003	.011	.020	.003	.010	.018	.E..LD
.S..GD	.013	.027	.048	.009	.019	.034	.007	.015	.026	.006	.013	.022	.005	.012	.020	.S..GD
.S..HD	.013	.032	.051	.009	.023	.037	.007	.017	.027	.006	.015	.024	.005	.014	.022	.S..HD

At .060 Axial Depth of Cut (ap)

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..LDJ	.010	.036	.066	.007	.026	.047	.005	.019	.035	.005	.017	.030	.004	.015	.028	.E..LDJ
.E..LD	.010	.036	.066	.007	.026	.047	.005	.019	.035	.005	.017	.030	.004	.015	.028	.E..LD
.S..GD	.019	.041	.073	.014	.029	.052	.010	.022	.039	.009	.019	.034	.008	.017	.031	.S..GD
.S..HD	.019	.048	.078	.014	.034	.056	.010	.026	.041	.009	.022	.036	.008	.021	.033	.S..HD

At .040 Axial Depth of Cut (ap)

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..LDJ	.010	.036	.066	.007	.026	.047	.005	.019	.035	.005	.017	.030	.004	.015	.028	.E..LDJ
.E..LD	.010	.036	.066	.007	.026	.047	.005	.019	.035	.005	.017	.030	.004	.015	.028	.E..LD
.S..GD	.019	.041	.073	.014	.029	.052	.010	.022	.039	.009	.019	.034	.008	.017	.031	.S..GD
.S..HD	.019	.048	.078	.014	.034	.056	.010	.026	.041	.009	.022	.036	.008	.021	.033	.S..HD

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..LDJ	.005	.017	.031	.004	.013	.023	.003	.009	.017	.002	.008	.015	.002	.008	.014	.E..LDJ
.E..LD	.005	.017	.031	.004	.013	.023	.003	.009	.017	.002	.008	.015	.002	.008	.014	.E..LD
.S..GD	.009	.020	.035	.007	.014	.025	.005	.011	.019	.004	.009	.016	.004	.009	.015	.S..GD
.S..HD	.009	.023	.037	.007	.017	.027	.005	.013	.020	.004	.011	.017	.004	.010	.016	.S..HD

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..LDJ	.008	.030	.054	.006	.021	.039	.005	.016	.029	.004	.014	.025	.004	.013	.023	.E..LDJ
.E..LD	.008	.030	.054	.006	.021	.039	.005	.016	.029	.004	.014	.025	.004	.013	.023	.E..LD
.S..GD	.016	.034	.060	.011	.024	.043	.009	.018	.032	.007	.016	.028	.007	.014	.025	.S..GD
.S..HD	.016	.040	.064	.011	.029	.046	.009	.021	.034	.007	.019	.030	.007	.017	.027	.S..HD

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..LDJ	.008	.030	.054	.006	.021	.039	.005	.016	.029	.004	.014	.025	.004	.013	.023	.E..LDJ
.E..LD	.008	.030	.054	.006	.021	.039	.005	.016	.029	.004	.014	.025	.004	.013	.023	.E..LD
.S..GD	.016	.034	.060	.011	.024	.043	.009	.018	.032	.007	.016	.028	.007	.014	.025	.S..GD
.S..HD	.016	.040	.064	.011	.029	.046	.009	.021	.034	.007	.019	.030	.007	.017	.027	.S..HD

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..LDJ	.005	.017	.031	.004	.013	.023	.003	.009	.017	.002	.008	.015	.002	.008	.014	.E..LDJ
.E..LD	.005	.017	.031	.004	.013	.023	.003	.009	.017	.002	.008	.015	.002	.008	.014	.E..LD
.S..GD	.009	.020	.035	.007	.014	.025	.005	.011	.019	.004	.009	.016	.004	.009	.015	.S..GD
.S..HD	.009	.023	.037	.007	.017	.027	.005	.013	.020	.004	.011	.017	.004	.010	.016	.S..HD

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..LDJ	.007	.024	.043	.005	.017	.031	.004	.013	.023	.003	.011	.020	.003	.010	.018	.E..LDJ
.E..LD	.007	.024	.043	.005	.017	.031	.004	.013	.023	.003	.011	.020	.003	.010	.018	.E..LD
.S..GD	.013	.027	.048	.009	.019	.034	.007	.015	.026	.006	.013	.022	.005	.012	.020	.S..GD
.S..HD	.013	.032	.051	.009	.023	.037	.007	.017	.027	.006	.015	.024	.005	.014	.022	.S..HD

View MoreView Less

Speeds

Recommended Starting Speeds [m/min]

Material Group		KCK15			KC520M			KCPM20			KC522M			KC725M			KCMP30			KCPK30
P	1	–	–	–	–	–	–	660	580	535	395	345	325	315	275	255	545	475	440	545	475	440
	2	–	–	–	–	–	–	410	370	330	330	290	240	260	230	195	335	305	275	335	305	275
	3	–	–	–	–	–	–	370	330	305	305	255	215	240	205	170	305	275	250	305	275	250
	4	–	–	–	–	–	–	275	255	230	270	225	180	215	180	145	225	210	190	225	210	190
	5	–	–	–	–	–	–	330	300	275	225	200	180	180	160	145	310	275	255	310	275	255
	6	–	–	–	–	–	–	230	200	175	200	150	120	160	120	95	190	165	–	190	165	–
M	1	–	–	–	–	–	–	270	240	205	245	215	200	205	180	165	250	220	190	250	220	190
	2	–	–	–	–	–	–	245	215	190	225	190	160	185	160	130	225	195	170	225	195	170
	3	–	–	–	–	–	–	195	175	150	170	145	115	140	120	95	175	160	140	175	160	140
K	1	505	460	410	325	295	260	435	390	350	275	250	220	–	–	–	–	–	–	–	–	–
	2	400	355	330	255	225	215	345	310	280	215	195	180	–	–	–	–	–	–	–	–	–
	3	335	300	275	215	190	170	290	255	240	180	160	145	–	–	–	–	–	–	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
N	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	50	45	35	45	35	30	45	35	30	45	35	30
	2	–	–	–	–	–	–	–	–	–	50	45	35	45	35	30	45	35	30	45	35	30
	3	–	–	–	–	–	–	–	–	–	60	50	35	55	45	30	55	45	30	55	45	30
	4	–	–	–	–	–	–	–	–	–	85	60	45	75	55	35	75	55	35	75	55	35
H	1	–	–	–	–	–	–	170	140	115	145	110	85	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Material Group		KCK15			KC520M			KCPM20			KC522M			KC725M			KCMP30			KCPK30
P	1	–	–	–	–	–	–	660	580	535	395	345	325	315	275	255	545	475	440	545	475	440
	2	–	–	–	–	–	–	410	370	330	330	290	240	260	230	195	335	305	275	335	305	275
	3	–	–	–	–	–	–	370	330	305	305	255	215	240	205	170	305	275	250	305	275	250
	4	–	–	–	–	–	–	275	255	230	270	225	180	215	180	145	225	210	190	225	210	190
	5	–	–	–	–	–	–	330	300	275	225	200	180	180	160	145	310	275	255	310	275	255
	6	–	–	–	–	–	–	230	200	175	200	150	120	160	120	95	190	165	–	190	165	–
M	1	–	–	–	–	–	–	270	240	205	245	215	200	205	180	165	250	220	190	250	220	190
	2	–	–	–	–	–	–	245	215	190	225	190	160	185	160	130	225	195	170	225	195	170
	3	–	–	–	–	–	–	195	175	150	170	145	115	140	120	95	175	160	140	175	160	140
K	1	505	460	410	325	295	260	435	390	350	275	250	220	–	–	–	–	–	–	–	–	–
	2	400	355	330	255	225	215	345	310	280	215	195	180	–	–	–	–	–	–	–	–	–
	3	335	300	275	215	190	170	290	255	240	180	160	145	–	–	–	–	–	–	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	50	45	35	45	35	30	45	35	30	45	35	30
	2	–	–	–	–	–	–	–	–	–	50	45	35	45	35	30	45	35	30	45	35	30
	3	–	–	–	–	–	–	–	–	–	60	50	35	55	45	30	55	45	30	55	45	30
	4	–	–	–	–	–	–	–	–	–	85	60	45	75	55	35	75	55	35	75	55	35
H	1	–	–	–	–	–	–	170	140	115	145	110	85	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Recommended Starting Speeds [SFM]

Material Group		KCK15			KC520M			KCPM20			KC522M			KC725M			KCMP30			KCPK30
P	1	–	–	–	–	–	–	2170	1910	1760	1300	1130	1060	1030	900	840	1780	1560	1450	1780	1560	1450
	2	–	–	–	–	–	–	1340	1210	1090	1080	950	790	860	760	640	1100	1000	900	1100	1000	900
	3	–	–	–	–	–	–	1210	1090	1000	1000	840	700	790	670	550	1000	900	820	1000	900	820
	4	–	–	–	–	–	–	910	840	760	890	730	590	710	590	470	740	690	620	740	690	620
	5	–	–	–	–	–	–	1090	980	900	730	660	590	590	530	470	1020	910	830	1020	910	830
	6	–	–	–	–	–	–	760	660	570	650	490	400	520	400	310	620	540	-	620	540	0
M	1	–	–	–	–	–	–	880	790	680	800	710	650	670	590	540	820	720	620	820	720	620
	2	–	–	–	–	–	–	800	700	620	730	620	520	610	520	430	730	640	550	730	640	550
	3	–	–	–	–	–	–	640	570	490	550	480	370	460	400	310	570	520	460	570	520	460
K	1	1660	1510	1340	1060	960	850	1420	1280	1150	900	820	720	–	–	–	–	–	–	1160	1050	940
	2	1310	1170	1090	830	740	700	1130	1010	920	710	640	590	–	–	–	–	–	–	920	830	760
	3	1100	980	900	700	620	560	950	840	780	590	530	480	–	–	–	–	–	–	770	690	640
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
N	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	160	140	110	140	120	100	140	120	100	–	–	–
	2	–	–	–	–	–	–	–	–	–	160	140	110	140	120	100	140	120	100	–	–	–
	3	–	–	–	–	–	–	–	–	–	200	160	110	180	140	100	180	140	100	–	–	–
	4	–	–	–	–	–	–	–	–	–	280	200	140	240	180	120	240	180	120	–	–	–
H	1	–	–	–	–	–	–	550	460	370	470	360	280	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Material Group		KCK15			KC520M			KCPM20			KC522M			KC725M			KCMP30			KCPK30
P	1	–	–	–	–	–	–	2170	1910	1760	1300	1130	1060	1030	900	840	1780	1560	1450	1780	1560	1450
	2	–	–	–	–	–	–	1340	1210	1090	1080	950	790	860	760	640	1100	1000	900	1100	1000	900
	3	–	–	–	–	–	–	1210	1090	1000	1000	840	700	790	670	550	1000	900	820	1000	900	820
	4	–	–	–	–	–	–	910	840	760	890	730	590	710	590	470	740	690	620	740	690	620
	5	–	–	–	–	–	–	1090	980	900	730	660	590	590	530	470	1020	910	830	1020	910	830
	6	–	–	–	–	–	–	760	660	570	650	490	400	520	400	310	620	540	-	620	540	0
M	1	–	–	–	–	–	–	880	790	680	800	710	650	670	590	540	820	720	620	820	720	620
	2	–	–	–	–	–	–	800	700	620	730	620	520	610	520	430	730	640	550	730	640	550
	3	–	–	–	–	–	–	640	570	490	550	480	370	460	400	310	570	520	460	570	520	460
K	1	1660	1510	1340	1060	960	850	1420	1280	1150	900	820	720	–	–	–	–	–	–	1160	1050	940
	2	1310	1170	1090	830	740	700	1130	1010	920	710	640	590	–	–	–	–	–	–	920	830	760
	3	1100	980	900	700	620	560	950	840	780	590	530	480	–	–	–	–	–	–	770	690	640
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	160	140	110	140	120	100	140	120	100	–	–	–
	2	–	–	–	–	–	–	–	–	–	160	140	110	140	120	100	140	120	100	–	–	–
	3	–	–	–	–	–	–	–	–	–	200	160	110	180	140	100	180	140	100	–	–	–
	4	–	–	–	–	–	–	–	–	–	280	200	140	240	180	120	240	180	120	–	–	–
H	1	–	–	–	–	–	–	550	460	370	470	360	280	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

View MoreView Less

Insert Selection

Insert Selection Guide

Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance				toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	.E..LDJ	KC725M	.S..GD	KCPM40	.S..HD	KCPM40
P3–P4	.E..LDJ	KC522M	.S..GD	KCPK30	.S..HD	KCPM40
P5–P6	.E..LDJ	KC725M	.S..GD	KC725M	.S..HD	KC725M
M1–M2	.E..LDJ	KC522M	.S..HD	KC725M	.S..GD	KCSM40
M3	.E..LDJ	KC725M	.S..GD	KCPM40	.S..HD	KCPM40
K1–K2	.S..HD	KC520M	.S..HD	KC520M	.S..HD	KCK15
K3	.S..GD	KCPK30	.S..HD	KC520M	.S..HD	KCK15
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	.E..LDJ	KC725M	.S..GD	KCSM40	.S..HD	KC725M
S3	.E..LDJ	KC725M	.S..GD	KCSM40	.S..HD	KCPM40
S4	.E..LDJ	KC522M	.S..GD	KCSM40	.S..HD	KC725M
H1	–	–	–	–	–	–

Material Group	Light Machining		General Purpose		Heavy Machining
	(Light geometry)		General Purpose		(Strong geometry)
	wear resistance				toughness
	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	.E..LDJ	KC725M	.S..GD	KCPM40	.S..HD	KCPM40
P3–P4	.E..LDJ	KC522M	.S..GD	KCPK30	.S..HD	KCPM40
P5–P6	.E..LDJ	KC725M	.S..GD	KC725M	.S..HD	KC725M
M1–M2	.E..LDJ	KC522M	.S..HD	KC725M	.S..GD	KCSM40
M3	.E..LDJ	KC725M	.S..GD	KCPM40	.S..HD	KCPM40
K1–K2	.S..HD	KC520M	.S..HD	KC520M	.S..HD	KCK15
K3	.S..GD	KCPK30	.S..HD	KC520M	.S..HD	KCK15
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	.E..LDJ	KC725M	.S..GD	KCSM40	.S..HD	KC725M
S3	.E..LDJ	KC725M	.S..GD	KCSM40	.S..HD	KCPM40
S4	.E..LDJ	KC522M	.S..GD	KCSM40	.S..HD	KC725M
H1	–	–	–	–	–	–

View MoreView Less

You are about to leave the Solution building process.

Are you sure you want to leave?

Material Number	5274722
ISO Catalog ID	RNPJ1605M0SHD
ANSI Catalog ID	RNPJ1605M0SHD
Grade	KCPK30
[D] Insert IC Size	16 mm
[D] Insert IC Size	0.63 in
[S] Insert Thickness	5.517 mm
[S] Insert Thickness	0.217 in
Average Chip Thickness [HM]	0.225 mm
Average Chip Thickness [HM]	0.0089 in
Insert Number of Indexes	12

Welcome

Please confirm your preferences

Update Preferences

Product Suggestions

Product Family suggestions

Chat Now

Call (833) 893-0249

Message Sales

Chat Now

Call (833) 893-0249

Nachricht an Vertriebsteam

Editing Solution

Adding Solution

Product Similar To :

Rodeka™ IC16 • Carbide Insert • RNPJ-HD • Heavy Machining

Copy milling insert with twelve cutting edges.

Material Number5274722

ISO Catalog IDRNPJ1605M0SHDANSI Catalog IDRNPJ1605M0SHD

Workpiece Materials

Features and benefits

Feeds

At 8,00 Axial Depth of Cut (ap)

At 2,50 Axial Depth of Cut (ap)

At 1,50 Axial Depth of Cut (ap)

At 1,00 Axial Depth of Cut (ap)

At .320 Axial Depth of Cut (ap)

At .100 Axial Depth of Cut (ap)

At .060 Axial Depth of Cut (ap)

At .040 Axial Depth of Cut (ap)

Speeds

Recommended Starting Speeds [m/min]

Recommended Starting Speeds [SFM]

Insert Selection

Insert Selection Guide

Product Suggestions

Product Family suggestions

Chat Now

Call (833) 893-0249

Message Sales

Notifications

Chat Now

Call (833) 893-0249

Nachricht an Vertriebsteam

Product Similar To :

Rodeka™ IC16 • Carbide Insert • RNPJ-HD • Heavy Machining

Copy milling insert with twelve cutting edges.

Material Number5274722

ISO Catalog IDRNPJ1605M0SHDANSI Catalog IDRNPJ1605M0SHD

Sending to {{cadTool}} in progress...

Workpiece Materials

Features and benefits

Feeds

At 8,00 Axial Depth of Cut (ap)

At 2,50 Axial Depth of Cut (ap)

At 1,50 Axial Depth of Cut (ap)

At 1,00 Axial Depth of Cut (ap)

At .320 Axial Depth of Cut (ap)

At .100 Axial Depth of Cut (ap)

At .060 Axial Depth of Cut (ap)

At .040 Axial Depth of Cut (ap)

Speeds

Recommended Starting Speeds [m/min]

Recommended Starting Speeds [SFM]

Insert Selection

Insert Selection Guide

The following files are available