Produit similaire à:
T651 • Métrique extra long • Taraud machine, entrée forme C • Éolien
Tarauds HSS-E-PM à goujures hélicoïdales Beyond™ • Trous borgnes
Numéro de matériel4153889
Ref. ISO CatalogueT651M240X300R6HX-XLRef. ANSI CatalogueT651M240X300R6HX-XL
- P Acier
- Filetage : trou borgne
- Classe de tolérance : 6HX
- Chanfrein Forme C (2–3)
- Acier rapide-E-PM
- Arrosage interne : axial : Taraudage
- Spécifications fabricant : M
- Angle d'hélice : 15°
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Numéro de matériel | 4153889 |
Ref. ISO Catalogue | T651M240X300R6HX-XL |
Ref. ANSI Catalogue | T651M240X300R6HX-XL |
Nuance | KP6525 |
[D1-TDZ] Taille du diamètre de filetage | M24 X 3 |
[L] Longueur totale | 200 mm |
[L] Longueur totale | 7.87 in |
[L3] Longueur du filet | 30 mm |
[L3] Longueur du filet | 1.18 in |
[L2] Longueur exploitable | 120 mm |
[L2] Longueur exploitable | 4.72 in |
[D] Adaptateur / Queue / Diamètre d’alésage | 18 mm |
[D] Adaptateur / Queue / Diamètre d’alésage | .7087 in |
[Z] Nombre de goujures | 4 |
Classe de tolérance du filet ISO | 6HX-I |
Matériaux de pièce à usiner
- Acier
Uses and application
- Filetage : trou borgne
- Classe de tolérance : 6HX
- Chanfrein Forme C (2–3)
- Acier rapide-E-PM
- Arrosage interne : axial : Taraudage
- Spécifications fabricant : M
- Angle d'hélice : 15°
Features and benefits
- KP6525 TiCN+TiN pour le taraudage dans l'acier et la fonte.
Créez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
Tolérance
Tolérances
shank tolerance | |
D | tolerance h6 + / - |
12 | +0, -0,011 |
20 | +0, -0,013 |
32 | +0, -0,016 |
DIN 371
D1 | pitch | D | L | L3* | L2 | L5 | S10 |
M3 | 0.5 | 3.5 | 56 | 11 | 18 | 6 | 2.7 |
M3.5 | 0.6 | 4 | 56 | 12 | 20 | 6 | 3 |
M4 | 0.7 | 4.5 | 63 | 13 | 21 | 6 | 3.4 |
M4.5 | 0.75 | 6 | 70 | 16 | 25 | 8 | 4.9 |
M5 | 0.8 | 6 | 70 | 16 | 25 | 8 | 4.9 |
M6 | 1 | 6 | 80 | 19 | 30 | 8 | 4.9 |
M7 | 1 | 7 | 80 | 19 | 30 | 8 | 5.5 |
M8 | 0.75 | 8 | 80 | 18 | 30 | 9 | 6.2 |
M8 | 1.25 | 8 | 90 | 22 | 35 | 9 | 6.2 |
M9 | 0.75 | 9 | 80 | 18 | 30 | 10 | 7 |
M9 | 1.25 | 9 | 90 | 22 | 35 | 10 | 7 |
M10 | 1 | 10 | 90 | 20 | 35 | 11 | 8 |
M10 | 1.5 | 10 | 100 | 24 | 39 | 11 | 8 |
DIN 374
pitch | |||||||
D1 | minimum | maximum | D | L | L3* | L5 | S10 |
M8 | 0.2 | 0.75 | 6 | 80 | 18 | 8 | 4.9 |
M8 | — | 1 | 6 | 90 | 22 | 8 | 4.9 |
M9 | 0.2 | 0.75 | 7 | 80 | 18 | 8 | 5.5 |
M9 | — | 1 | 7 | 90 | 22 | 8 | 5.5 |
M10 | 0.2 | 1 | 7 | 90 | 20 | 8 | 5.5 |
M10 | — | 1.25 | 7 | 100 | 24 | 8 | 5.5 |
M11 | 0.35 | 1 | 8 | 90 | 20 | 9 | 6.2 |
M12 | 0.35 | 1.5 | 9 | 100 | 22 | 10 | 7 |
M14 | 0.35 | 1.5 | 11 | 100 | 22 | 12 | 9 |
M16 | 0.35 | 1.5 | 12 | 100 | 22 | 12 | 9 |
M16 | — | 2 | 12 | 110 | 32 | 12 | 9 |
M18 | 0.35 | 1.5 | 14 | 110 | 25 | 14 | 11 |
M18 | — | 2 | 14 | 125 | 34 | 14 | 11 |
M20 | 0.35 | 1.5 | 16 | 125 | 25 | 15 | 12 |
M20 | — | 2 | 16 | 140 | 34 | 15 | 12 |
M22 | 0.35 | 1.5 | 18 | 125 | 25 | 17 | 14.5 |
M22 | — | 2 | 18 | 140 | 34 | 17 | 14.5 |
M24 | 0.35 | 2 | 18 | 140 | 28 | 17 | 14.5 |
M27 | 0.35 | 2 | 20 | 140 | 28 | 19 | 16 |
M30 | 0.35 | 2 | 22 | 150 | 28 | 21 | 18 |
M30 | — | 3 | 22 | 180 | 45 | 21 | 18 |
DIN 376
D1 | pitch | D | L | L3* | L5 | S10 |
M8 | 1.25 | 6 | 90 | 22 | 8 | 4.9 |
M9 | 1.25 | 7 | 90 | 22 | 8 | 5.5 |
M10 | 1.5 | 7 | 100 | 24 | 8 | 5.5 |
M11 | 1.5 | 8 | 100 | 24 | 9 | 6.2 |
M12 | 1.75 | 9 | 110 | 28 | 10 | 7 |
M14 | 2 | 11 | 110 | 30 | 12 | 9 |
M16 | 2 | 12 | 110 | 32 | 12 | 9 |
M18 | 2.5 | 14 | 125 | 34 | 14 | 11 |
M20 | 2.5 | 16 | 140 | 34 | 15 | 12 |
M22 | 2.5 | 18 | 140 | 34 | 17 | 14.5 |
M24 | 3 | 18 | 160 | 38 | 17 | 14.5 |
M27 | 3 | 20 | 160 | 38 | 19 | 16 |
M30 | 3.5 | 22 | 180 | 45 | 21 | 18 |
M33 | 3.5 | 25 | 180 | 50 | 23 | 20 |
M36 | 4 | 28 | 200 | 56 | 25 | 22 |
M39 | 4 | 32 | 200 | 60 | 27 | 24 |
M42 | 4.5 | 32 | 200 | 60 | 27 | 24 |
M45 | 4.5 | 36 | 220 | 65 | 32 | 29 |
JIS Type 3 grand pas métrique
D1 | pitch | D | L | L3 | L5 | S10 |
M8 | 1.25 | 6.2 | 70 | 22 | 8 | 5 |
M9 | 1.25 | 7 | 72 | 22 | 8 | 5.5 |
M10 | 1.5 | 7 | 75 | 24 | 8 | 5.5 |
M11 | 1.5 | 8 | 80 | 25 | 9 | 6 |
M12 | 1.75 | 8.5 | 82 | 29 | 9 | 6.5 |
M14 | 2 | 10.5 | 88 | 30 | 11 | 8 |
M16 | 2 | 12.5 | 95 | 32 | 13 | 10 |
M18 | 2.5 | 14 | 100 | 37 | 14 | 11 |
M20 | 2.5 | 15 | 105 | 37 | 15 | 12 |
M22 | 2.5 | 17 | 115 | 38 | 16 | 13 |
M24 | 3 | 19 | 120 | 45 | 18 | 15 |
Données d'application
HSS-E-PM Taps • Grades KP6505 KP6525 KM6515 | ||||||||||||||||
Tapping Operation | Tap Style | Grade1 | Cutting Speed | |||||||||||||
Starting Value | ||||||||||||||||
m/min | 3 | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | |||
SFM | 10 | 16 | 33 | 49 | 66 | 82 | 98 | 115 | 131 | 148 | 164 | 180 | 197 | |||
P1 • Low-Carbon Steels, Long Chipping • Content: C 0.25% • Tensile Strength RM (MPa*): 530 • Hardness (HB) or HRC: 125 | ||||||||||||||||
Through Holes | T620 | KP6525 | 38 | 30 | 45 | |||||||||||
125 | 98 | 148 | ||||||||||||||
Blind Holes | T630 | KP6525 | 23 | 18 | 27 | |||||||||||
75 | 59 | 89 | ||||||||||||||
P2 • Low-Carbon Steels, Free Machining, and Short Chipping • Content C 0.25% • Tensile Strength RM (MPa*): 650 • Hardness (HB) or HRC: 220 | ||||||||||||||||
Through Holes | T620 | KP6525 | 33 | 25 | 40 | |||||||||||
108 | 82 | 131 | ||||||||||||||
Blind Holes | T630 | KP6525 | 20 | 15 | 25 | |||||||||||
65 | 49 | 82 | ||||||||||||||
P3 • Medium- and High-Plain Carbon Steels, Low-Alloyed • Content C | ||||||||||||||||
Through Holes | T620 | KP6525 | 28 | 20 | 35 | |||||||||||
92 | 66 | 115 | ||||||||||||||
Blind Holes | T630 | KP6525 | 17 | 12 | 21 | |||||||||||
55 | 59 | 69 | ||||||||||||||
P5 • Ferritic, Martensitic, and PH Stainless Steels • Content C= 0-0.4% • Tensile Strength RM (MPa*): 600–850 • Hardness (HB) HRC: 330 | ||||||||||||||||
Through Holes | T620 | KP6525 | 18 | 10 | 25 | |||||||||||
59 | 33 | 82 | ||||||||||||||
Blind Holes | T630 | KP6525 | 11 | 6 | 15 | |||||||||||
35 | 20 | 49 | ||||||||||||||
P6 • High-Strength Ferritic, Martensitic, and PH Stainless Steels • Content C=0.1-0.6% • Tensile Strength RM (MPa*): 900-1350 • Hardness (HB) HRC: 350–450 | ||||||||||||||||
Through Holes | T620 | KP6525 | 10 | 5 | 15 | |||||||||||
33 | 16 | 49 | ||||||||||||||
Blind Holes | T630 | KP6525 | 6 | 3 | 9 | |||||||||||
20 | 10 | 30 | ||||||||||||||
M1 • Austenitic Stainless Steel • Content C=0.05-0.15% • Tensile Strength RM (MPa*): 650 • Hardness (HB) or HRC: 130-200 | ||||||||||||||||
Through Holes | T620 | KM6515 | 15 | 10 | 20 | |||||||||||
49 | 33 | 66 | ||||||||||||||
Blind Holes | T630 | KM6515 | 9 | 6 | 12 | |||||||||||
30 | 20 | 39 | ||||||||||||||
M2 • High-Strength Austenitic Stainless and Cast Stainless Steels • Content C=0.05-0.15% • Tensile Strength RM (MPa*): 500 - 700 • Hardness (HB) or HRC: 150-230 | ||||||||||||||||
Through Holes | T620 | KM6515 | 15 | 10 | 20 | |||||||||||
49 | 33 | 66 | ||||||||||||||
Blind Holes | T630 | KM6515 | 9 | 6 | 12 | |||||||||||
30 | 20 | 39 | ||||||||||||||
M3 • Duplex Steel • Content C=0.05-0.2 % • Tensile Strength RM (MPa*): 900 • Hardness (HB) HRC: 135-275 | ||||||||||||||||
Through Holes | T620 | KM6515 | 15 | 10 | 20 | |||||||||||
49 | 33 | 66 | ||||||||||||||
Blind Holes | T630 | KM6515 | 9 | 6 | 12 | |||||||||||
30 | 20 | 39 | ||||||||||||||
K1 • Cast and Low-Strength Ductile Irons • Tensile Strength RM (MPa*): 150-400 • Hardness (HB) or HRC: 120-290 | ||||||||||||||||
Through Holes | T640 | KP6525 | 45 | 30 | 60 | |||||||||||
148 | 98 | 197 | ||||||||||||||
Blind Holes | T640 | KP6525 | 27 | 18 | 36 | |||||||||||
90 | 59 | 118 | ||||||||||||||
K2 • Low- and Medium-Strength CGI and Ductile Irons • Tensile Strength RM (MPa*): 400-600 • Hardness (HB) or HRC: 130-260 | ||||||||||||||||
Through Holes | T640 | KP6525 | 38 | 25 | 50 | |||||||||||
125 | 82 | 164 | ||||||||||||||
Blind Holes | T640 | KP6525 | 23 | 15 | 30 | |||||||||||
75 | 49 | 98 | ||||||||||||||
K3 • High-Strength Ductile and Austempered Ductile Iron • Tensile Strength RM (MPa*): 600-900 • Hardness (HB) or HRC: 180-350 | ||||||||||||||||
Through Holes | T640 | KP6525 | 30 | 20 | 40 | |||||||||||
98 | 66 | 131 | ||||||||||||||
Blind Holes | T640 | KP6525 | 18 | 12 | 25 | |||||||||||
59 | 39 | 82 |
HSS-E-PM Taps • Grades KP6505 KP6525 KM6515 | ||||||||||||||||
Tapping Operation | Tap Style | Grade | Cutting Speed | |||||||||||||
Starting Value | ||||||||||||||||
m/min | 3 | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | |||
SFM | 10 | 16 | 33 | 49 | 66 | 82 | 98 | 115 | 131 | 148 | 164 | 180 | 197 | |||
P1 • Low-Carbon Steels, Long Chipping • Content: C 0.25% • Tensile Strength RM (MPa*): 530 • Hardness (HB) or HRC: 125 | ||||||||||||||||
Through Holes | T620 | KP6525 | 38 | 30 | 45 | |||||||||||
125 | 98 | 148 | ||||||||||||||
Blind Holes | T630 | KP6525 | 23 | 18 | 27 | |||||||||||
75 | 59 | 89 | ||||||||||||||
P2 • Low-Carbon Steels, Free Machining, and Short Chipping • Content C 0.25% • Tensile Strength RM (MPa*): 650 • Hardness (HB) or HRC: 220 | ||||||||||||||||
Through Holes | T620 | KP6525 | 33 | 25 | 40 | |||||||||||
108 | 82 | 131 | ||||||||||||||
Blind Holes | T630 | KP6525 | 20 | 15 | 25 | |||||||||||
65 | 49 | 82 | ||||||||||||||
P3 • Medium- and High-Plain Carbon Steels, Low-Alloyed • Content C | ||||||||||||||||
Through Holes | T620 | KP6525 | 28 | 20 | 35 | |||||||||||
92 | 66 | 115 | ||||||||||||||
Blind Holes | T630 | KP6525 | 17 | 12 | 21 | |||||||||||
55 | 59 | 69 | ||||||||||||||
P5 • Ferritic, Martensitic, and PH Stainless Steels • Content C= 0-0.4% • Tensile Strength RM (MPa*): 600–850 • Hardness (HB) HRC: 330 | ||||||||||||||||
Through Holes | T620 | KP6525 | 18 | 10 | 25 | |||||||||||
59 | 33 | 82 | ||||||||||||||
Blind Holes | T630 | KP6525 | 11 | 6 | 15 | |||||||||||
35 | 20 | 49 | ||||||||||||||
P6 • High-Strength Ferritic, Martensitic, and PH Stainless Steels • Content C=0.1-0.6% • Tensile Strength RM (MPa*): 900-1350 • Hardness (HB) HRC: 350–450 | ||||||||||||||||
Through Holes | T620 | KP6525 | 10 | 5 | 15 | |||||||||||
33 | 16 | 49 | ||||||||||||||
Blind Holes | T630 | KP6525 | 6 | 3 | 9 | |||||||||||
20 | 10 | 30 | ||||||||||||||
M1 • Austenitic Stainless Steel • Content C=0.05-0.15% • Tensile Strength RM (MPa*): 650 • Hardness (HB) or HRC: 130-200 | ||||||||||||||||
Through Holes | T620 | KM6515 | 15 | 10 | 20 | |||||||||||
49 | 33 | 66 | ||||||||||||||
Blind Holes | T630 | KM6515 | 9 | 6 | 12 | |||||||||||
30 | 20 | 39 | ||||||||||||||
M2 • High-Strength Austenitic Stainless and Cast Stainless Steels • Content C=0.05-0.15% • Tensile Strength RM (MPa*): 500 - 700 • Hardness (HB) or HRC: 150-230 | ||||||||||||||||
Through Holes | T620 | KM6515 | 15 | 10 | 20 | |||||||||||
49 | 33 | 66 | ||||||||||||||
Blind Holes | T630 | KM6515 | 9 | 6 | 12 | |||||||||||
30 | 20 | 39 | ||||||||||||||
M3 • Duplex Steel • Content C=0.05-0.2 % • Tensile Strength RM (MPa*): 900 • Hardness (HB) HRC: 135-275 | ||||||||||||||||
Through Holes | T620 | KM6515 | 15 | 10 | 20 | |||||||||||
49 | 33 | 66 | ||||||||||||||
Blind Holes | T630 | KM6515 | 9 | 6 | 12 | |||||||||||
30 | 20 | 39 | ||||||||||||||
K1 • Cast and Low-Strength Ductile Irons • Tensile Strength RM (MPa*): 150-400 • Hardness (HB) or HRC: 120-290 | ||||||||||||||||
Through Holes | T640 | KP6525 | 45 | 30 | 60 | |||||||||||
148 | 98 | 197 | ||||||||||||||
Blind Holes | T640 | KP6525 | 27 | 18 | 36 | |||||||||||
90 | 59 | 118 | ||||||||||||||
K2 • Low- and Medium-Strength CGI and Ductile Irons • Tensile Strength RM (MPa*): 400-600 • Hardness (HB) or HRC: 130-260 | ||||||||||||||||
Through Holes | T640 | KP6525 | 38 | 25 | 50 | |||||||||||
125 | 82 | 164 | ||||||||||||||
Blind Holes | T640 | KP6525 | 23 | 15 | 30 | |||||||||||
75 | 49 | 98 | ||||||||||||||
K3 • High-Strength Ductile and Austempered Ductile Iron • Tensile Strength RM (MPa*): 600-900 • Hardness (HB) or HRC: 180-350 | ||||||||||||||||
Through Holes | T640 | KP6525 | 30 | 20 | 40 | |||||||||||
98 | 66 | 131 | ||||||||||||||
Blind Holes | T640 | KP6525 | 18 | 12 | 25 | |||||||||||
59 | 39 | 82 |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use