Produkt ähnlich wie:

T651 • Metrisch DIN 376 • Form C-Anschnitt • Für Windenergie-Bauteile

Name: T651 • Metrisch DIN 376 • Form C-Anschnitt • Für Windenergie-Bauteile
SKU: 100004562
Rating: 0 (0 reviews)

Beyond™ HSS-E-PM Gewindebohrer • Sacklochbohrungen

Open expanded view

Allgemeine Darstellung

Kontaktieren Sie unser Verkaufsteam, um alle Ihre Preisoptionen zu erfahren.

Features and benefits

KP6525 TiCN + TiN für das Gewindebohren in Stahl und Gusseisen.

Gewindedrehen: Sacklochbohrung
Toleranzklasse: 6HX
DIN 376
Anschnitt Form C (2–3)
HSS-E-PM
Innere Kühlmittelzuführung: Axial: Gewindebohren
Herstellerspezifikationen: M
Spiralwinkel Gewindebohrer: 15°

Toleranz
Anwendungsdaten
Bewertung
F&A

Toleranzen

Schaft Toleranz
D	Toleranz h6 + / -
12 18	+0, -0,011
20 30	+0, -0,013
32 36	+0, -0,016

DIN 371

D1	Steigung	D	L	L3*	L2	L5	S10
M3	0,5	3,5	56	11	18	6	2,7
M3,5	0,6	4	56	12	20	6	3
M4	0,7	4,5	63	13	21	6	3,4
M4,5	0,75	6	70	16	25	8	4,9
M5	0,8	6	70	16	25	8	4,9
M6	1	6	80	19	30	8	4,9
M7	1	7	80	19	30	8	5,5
M8	0,75	8	80	18	30	9	6,2
M8	1,25	8	90	22	35	9	6,2
M9	0,75	9	80	18	30	10	7
M9	1,25	9	90	22	35	10	7
M10	1	10	90	20	35	11	8
M10	1,5	10	100	24	39	11	8

DIN 374

	Steigung
D1	Minimum	Maximum	D	L	L3*	L5	S10
M8	0,2	0,75	6	80	18	8	4,9
M8	—	1	6	90	22	8	4,9
M9	0,2	0,75	7	80	18	8	5,5
M9	—	1	7	90	22	8	5,5
M10	0,2	1	7	90	20	8	5,5
M10	—	1,25	7	100	24	8	5,5
M11	0,35	1	8	90	20	9	6,2
M12	0,35	1,5	9	100	22	10	7
M14	0,35	1,5	11	100	22	12	9
M16	0,35	1,5	12	100	22	12	9
M16	—	2	12	110	32	12	9
M18	0,35	1,5	14	110	25	14	11
M18	—	2	14	125	34	14	11
M20	0,35	1,5	16	125	25	15	12
M20	—	2	16	140	34	15	12
M22	0,35	1,5	18	125	25	17	14,5
M22	—	2	18	140	34	17	14,5
M24	0,35	2	18	140	28	17	14,5
M27	0,35	2	20	140	28	19	16
M30	0,35	2	22	150	28	21	18
M30	—	3	22	180	45	21	18

DIN 376

D1	Steigung	D	L	L3*	L5	S10
M8	1,25	6	90	22	8	4,9
M9	1,25	7	90	22	8	5,5
M10	1,5	7	100	24	8	5,5
M11	1,5	8	100	24	9	6,2
M12	1,75	9	110	28	10	7
M14	2	11	110	30	12	9
M16	2	12	110	32	12	9
M18	2,5	14	125	34	14	11
M20	2,5	16	140	34	15	12
M22	2,5	18	140	34	17	14,5
M24	3	18	160	38	17	14,5
M27	3	20	160	38	19	16
M30	3,5	22	180	45	21	18
M33	3,5	25	180	50	23	20
M36	4	28	200	56	25	22
M39	4	32	200	60	27	24
M42	4,5	32	200	60	27	24
M45	4,5	36	220	65	32	29

JIS, Typ 3, metrisch, Normalgewinde

D1	Steigung	D	L	L3	L5	S10
M8	1,25	6,2	70	22	8	5
M9	1,25	7	72	22	8	5,5
M10	1,5	7	75	24	8	5,5
M11	1,5	8	80	25	9	6
M12	1,75	8,5	82	29	9	6,5
M14	2	10,5	88	30	11	8
M16	2	12,5	95	32	13	10
M18	2,5	14	100	37	14	11
M20	2,5	15	105	37	15	12
M22	2,5	17	115	38	16	13
M24	3	19	120	45	18	15

HSS-E-PM Taps • Grades KP6505 KP6525 KM6515
Tapping Operation	Ausführung des Gewindebohrers	Grade¹	Schnittgeschwindigkeit vc
			Startwert
			m/min	3	5	10	15	20	25	30	35	40	45	50	55	60
			SFM	10	16	33	49	66	82	98	115	131	148	164	180	197
P1 • Low-Carbon Steels, Long Chipping • Content: C 0.25% • Tensile Strength RM (MPa*): 530 • Hardness (HB) or HRC: 125
Through Holes	T620	KP6525	38							30			45
Through Holes	T620	KP6525	125							98			148
Blind Holes	T630	KP6525	23					18		27
Blind Holes	T630	KP6525	75					59		89
P2 • Low-Carbon Steels, Free Machining, and Short Chipping • Content C 0.25% • Tensile Strength RM (MPa*): 650 • Hardness (HB) or HRC: 220
Through Holes	T620	KP6525	33						25			40
Through Holes	T620	KP6525	108						82			131
Blind Holes	T630	KP6525	20				15		25
Blind Holes	T630	KP6525	65				49		82
P3 • Medium- and High-Plain Carbon Steels, Low-Alloyed • Content C 0.25% • Tensile Strength RM (MPa*): 600–850 • Hardness (HB) or HRC: 330
Through Holes	T620	KP6525	28					20			35
Through Holes	T620	KP6525	92					66			115
Blind Holes	T630	KP6525	17				12	21
Blind Holes	T630	KP6525	55				59	69
P5 • Ferritic, Martensitic, and PH Stainless Steels • Content C= 0-0.4% • Tensile Strength RM (MPa*): 600–850 • Hardness (HB) HRC: 330
Through Holes	T620	KP6525	18			10			25
Through Holes	T620	KP6525	59			33			82
Blind Holes	T630	KP6525	11		6		15
Blind Holes	T630	KP6525	35		20		49
P6 • High-Strength Ferritic, Martensitic, and PH Stainless Steels • Content C=0.1-0.6% • Tensile Strength RM (MPa*): 900-1350 • Hardness (HB) HRC: 350–450
Through Holes	T620	KP6525	10		5		15
Through Holes	T620	KP6525	33		16		49
Blind Holes	T630	KP6525	6	3		9
Blind Holes	T630	KP6525	20	10		30
M1 • Austenitic Stainless Steel • Content C=0.05-0.15% • Tensile Strength RM (MPa*): 650 • Hardness (HB) or HRC: 130-200
Through Holes	T620	KM6515	15			10		20
Through Holes	T620	KM6515	49			33		66
Blind Holes	T630	KM6515	9		6		12
Blind Holes	T630	KM6515	30		20		39
M2 • High-Strength Austenitic Stainless and Cast Stainless Steels • Content C=0.05-0.15% • Tensile Strength RM (MPa*): 500 - 700 • Hardness (HB) or HRC: 150-230
Through Holes	T620	KM6515	15			10		20
Through Holes	T620	KM6515	49			33		66
Blind Holes	T630	KM6515	9		6		12
Blind Holes	T630	KM6515	30		20		39
M3 • Duplex Steel • Content C=0.05-0.2 % • Tensile Strength RM (MPa*): 900 • Hardness (HB) HRC: 135-275
Through Holes	T620	KM6515	15			10		20
Through Holes	T620	KM6515	49			33		66
Blind Holes	T630	KM6515	9		6		12
Blind Holes	T630	KM6515	30		20		39
K1 • Cast and Low-Strength Ductile Irons • Tensile Strength RM (MPa*): 150-400 • Hardness (HB) or HRC: 120-290
Through Holes	T640	KP6525	45							30						60
Through Holes	T640	KP6525	148							98						197
Blind Holes	T640	KP6525	27					18			36
Blind Holes	T640	KP6525	90					59			118
K2 • Low- and Medium-Strength CGI and Ductile Irons • Tensile Strength RM (MPa*): 400-600 • Hardness (HB) or HRC: 130-260
Through Holes	T640	KP6525	38						25					50
Through Holes	T640	KP6525	125						82					164
Blind Holes	T640	KP6525	23				15			30
Blind Holes	T640	KP6525	75				49			98
K3 • High-Strength Ductile and Austempered Ductile Iron • Tensile Strength RM (MPa*): 600-900 • Hardness (HB) or HRC: 180-350
Through Holes	T640	KP6525	30					20				40
Through Holes	T640	KP6525	98					66				131
Blind Holes	T640	KP6525	18			12		25
Blind Holes	T640	KP6525	59			39		82

HSS-E-PM Taps • Grades KP6505 KP6525 KM6515
Tapping Operation	Ausführung des Gewindebohrers	Sorte	Schnittgeschwindigkeit vc
			Startwert
			m/min	3	5	10	15	20	25	30	35	40	45	50	55	60
			SFM	10	16	33	49	66	82	98	115	131	148	164	180	197
P1 • Low-Carbon Steels, Long Chipping • Content: C 0.25% • Tensile Strength RM (MPa*): 530 • Hardness (HB) or HRC: 125
Through Holes	T620	KP6525	38							30			45
			125							98			148
Blind Holes	T630	KP6525	23					18		27
			75					59		89
P2 • Low-Carbon Steels, Free Machining, and Short Chipping • Content C 0.25% • Tensile Strength RM (MPa*): 650 • Hardness (HB) or HRC: 220
Through Holes	T620	KP6525	33						25			40
			108						82			131
Blind Holes	T630	KP6525	20				15		25
			65				49		82
P3 • Medium- and High-Plain Carbon Steels, Low-Alloyed • Content C 0.25% • Tensile Strength RM (MPa*): 600–850 • Hardness (HB) or HRC: 330
Through Holes	T620	KP6525	28					20			35
			92					66			115
Blind Holes	T630	KP6525	17				12	21
			55				59	69
P5 • Ferritic, Martensitic, and PH Stainless Steels • Content C= 0-0.4% • Tensile Strength RM (MPa*): 600–850 • Hardness (HB) HRC: 330
Through Holes	T620	KP6525	18			10			25
			59			33			82
Blind Holes	T630	KP6525	11		6		15
			35		20		49
P6 • High-Strength Ferritic, Martensitic, and PH Stainless Steels • Content C=0.1-0.6% • Tensile Strength RM (MPa*): 900-1350 • Hardness (HB) HRC: 350–450
Through Holes	T620	KP6525	10		5		15
			33		16		49
Blind Holes	T630	KP6525	6	3		9
			20	10		30
M1 • Austenitic Stainless Steel • Content C=0.05-0.15% • Tensile Strength RM (MPa*): 650 • Hardness (HB) or HRC: 130-200
Through Holes	T620	KM6515	15			10		20
			49			33		66
Blind Holes	T630	KM6515	9		6		12
			30		20		39
M2 • High-Strength Austenitic Stainless and Cast Stainless Steels • Content C=0.05-0.15% • Tensile Strength RM (MPa*): 500 - 700 • Hardness (HB) or HRC: 150-230
Through Holes	T620	KM6515	15			10		20
			49			33		66
Blind Holes	T630	KM6515	9		6		12
			30		20		39
M3 • Duplex Steel • Content C=0.05-0.2 % • Tensile Strength RM (MPa*): 900 • Hardness (HB) HRC: 135-275
Through Holes	T620	KM6515	15			10		20
			49			33		66
Blind Holes	T630	KM6515	9		6		12
			30		20		39
K1 • Cast and Low-Strength Ductile Irons • Tensile Strength RM (MPa*): 150-400 • Hardness (HB) or HRC: 120-290
Through Holes	T640	KP6525	45							30						60
			148							98						197
Blind Holes	T640	KP6525	27					18			36
			90					59			118
K2 • Low- and Medium-Strength CGI and Ductile Irons • Tensile Strength RM (MPa*): 400-600 • Hardness (HB) or HRC: 130-260
Through Holes	T640	KP6525	38						25					50
			125						82					164
Blind Holes	T640	KP6525	23				15			30
			75				49			98
K3 • High-Strength Ductile and Austempered Ductile Iron • Tensile Strength RM (MPa*): 600-900 • Hardness (HB) or HRC: 180-350
Through Holes	T640	KP6525	30					20				40
			98					66				131
Blind Holes	T640	KP6525	18			12		25
			59			39		82

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Willkommen

Bestätigen Sie bitte Ihre Präferenzen

Einstellungen aktualisieren

Produktvorschläge

Product Family suggestions

Vertriebsteam kontaktieren

Lösung bearbeiten

Lösung hinzufügen

Produkt ähnlich wie:

T651 • Metrisch DIN 376 • Form C-Anschnitt • Für Windenergie-Bauteile

Beyond™ HSS-E-PM Gewindebohrer • Sacklochbohrungen