Bohren
Bohren: Schräge Eintrittsfläche
Bohren: Schräge Austrittsfläche
Bohren: X-Verstellung
Bohren: Konvexe Eintrittsfläche
Schaft – KM-TS ISO 26622
Innere Kühlmittelzuführung: Radial: Bohren mit Wendeschneidplatten
Bohren: Sacklochbohrung
Chain Drilling
Drilling: Cross-Hole Drilling
Drilling: Half-Cylindrical Drilling
Drilling: Corner Drilling 45°Downloaded file will be available after import in the {{cadTool}} tool library.
| Material Nummer | 4122650 |
| ISO Katalog Nummer | KM63TSDFS1625R3 |
| ANSI Katalog Nummer | KM63TSDFS1625R3 |
| [CSMS] Systemgröße – Maschinenseite | KM63TS |
| [D1] Bohrerdurchmesser M | 41.275 mm |
| [D1] Bohrerdurchmesser M | 1.625 in |
| [D1MAX] Bohrerdurchmesser max. | 42.291 mm |
| [D1MAX] Bohrerdurchmesser max. | 1.665 in |
| [L1] Messlänge der Wendeschneidplatte | 177.8 mm |
| [L1] Messlänge der Wendeschneidplatte | 7 in |
| [L4] Maximale Bohrtiefe | 123.825 mm |
| [L4] Maximale Bohrtiefe | 4.875 in |
| [L5] Bohrerspitzenlänge | 1.051 mm |
| [L5] Bohrerspitzenlänge | .0414 in |
| Wendeschneidplatten-Größe | SPPX1204. |
| Maß-Wendeschneidplatte 2 | DFT0704. |
BohrenBohren: Schräge EintrittsflächeBohren: Schräge AustrittsflächeBohren: X-VerstellungBohren: Konvexe EintrittsflächeSchaft – KM-TS ISO 26622Innere Kühlmittelzuführung: Radial: Bohren mit WendeschneidplattenBohren: SacklochbohrungChain DrillingDrilling: Cross-Hole DrillingDrilling: Half-Cylindrical DrillingDrilling: Corner Drilling 45°Lösung erstellen, um Vorschübe und Geschwindigkeiten zu berechnen
Nachdem Sie eine Lösung erstellt haben, wählen Sie einfach das Symbol für Vorschübe und Geschwindigkeiten und unser System gibt Ihnen Empfehlungen. Sie können die Informationen anpassen, indem Sie Ihre Maschine und Spezifikationen hinzufügen oder Anpassungen mithilfe der Schieberegler vornehmen.
| WARNING During through-hole operations, a slug or disc is produced as the tool breaks through the workpiece. When the drill is stationary and the workpiece is rotating, this slug may be hurled from the chuck by centrifugal force. Provide adequate shielding to protect bystanders. |
| Inch | |||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (fz) by Diameter | |||||||
| Range | |||||||||||||
| min | Starting Value | max | Ø | SPGX07 DFT05 .866–1.023 | SPGX09 DFT05 1.024–1.299 | SPGX12 DFT06/..07 1.300–1.732 | SPGX15 DFT07/..09 1.733–2.165 | ||||||
| P | 1 | S | O | MD | KCPK10 | 1017 | 1066 | 1181 | IPR | DFT05 | .006 – .010 | .006 – .012 | .007 – .012 |
| S | I | MD | KC7140 | 1017 | 1066 | 1181 | IPR | .866–1.023 | .006 – .010 | .006 – .012 | .007 – .012 | ||
| U | O | FP | KCU25 | 656 | 705 | 755 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| U | I | MD | KC7140 | 656 | 705 | 755 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| I | O | HP | KCU40 | 427 | 443 | 492 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| I | I | MD | KC7140 | 427 | 443 | 492 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| 2 | S | O | MD | KCPK10 | 1017 | 1066 | 1181 | IPR | .004 – .007 | .006 – .010 | .006 – .012 | .007 – .012 | |
| S | I | MD | KC7140 | 1017 | 1066 | 1181 | IPR | .004 – .007 | .006 – .010 | .006 – .012 | .007 – .012 | ||
| U | O | FP | KCU25 | 656 | 705 | 755 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| U | I | MD | KC7140 | 656 | 705 | 755 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| I | O | HP | KCU40 | 427 | 443 | 492 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| I | I | MD | KC7140 | 427 | 443 | 492 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| 3 | S | O | MD | KCPK10 | 853 | 935 | 1050 | IPR | .004 – .007 | .006 – .010 | .006 – .012 | .007 – .012 | |
| S | I | MD | KC7140 | 853 | 935 | 1050 | IPR | .004 – .007 | .006 – .010 | .006 – .012 | .007 – .012 | ||
| U | O | FP | KCU25 | 591 | 640 | 722 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| U | I | MD | KC7140 | 591 | 640 | 722 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| I | O | HP | KCU40 | 361 | 394 | 459 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| I | I | MD | KC7140 | 361 | 394 | 459 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| 4 | S | O | FP | KCPK10 | 722 | 820 | 984 | IPR | .004 – .007 | .006 – .010 | .006 – .012 | .007 – .012 | |
| S | I | MD | KC7140 | 722 | 820 | 984 | IPR | .004 – .007 | .006 – .010 | .006 – .012 | .007 – .012 | ||
| U | O | HP | KCU25 | 492 | 591 | 722 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| U | I | MD | KC7140 | 492 | 591 | 722 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| I | O | HP | KCU40 | 295 | 361 | 459 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| I | I | MD | KC7140 | 295 | 361 | 459 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| 5 | S | O | HP | KCU25 | 591 | 656 | 722 | IPR | .004 – .007 | .006 – .010 | .006 – .012 | .007 – .012 | |
| S | I | MD | KC7140 | 591 | 656 | 722 | IPR | .004 – .007 | .006 – .010 | .006 – .012 | .007 – .012 | ||
| U | O | HP | KCU40 | 394 | 443 | 492 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| U | I | MD | KC7140 | 394 | 443 | 492 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| I | O | HP | KC7140 | 230 | 279 | 328 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| I | I | MD | KC7140 | 230 | 279 | 328 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| 6 | S | O | HP | KCU25 | 590 | 656 | 722 | IPR | .004 – .007 | .006 – .010 | .006 – .012 | .007 – .012 | |
| S | I | MD | KC7140 | 590 | 656 | 722 | IPR | .004 – .007 | .006 – .010 | .006 – .012 | .007 – .012 | ||
| U | O | HP | KCU40 | 394 | 443 | 492 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| U | I | MD | KC7140 | 394 | 443 | 492 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| I | O | HP | KC7140 | 230 | 279 | 328 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
| I | I | MD | KC7140 | 230 | 279 | 328 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .005 – .010 | ||
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO Katalog
ANSI Katalog
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Katalog | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?