KM™ Systems
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (1358)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1354)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1354)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1354)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1354)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1354)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1358)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1358)
- M Stainless Steel (1343)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1343)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1343)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1343)
- K Cast Iron (1383)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1383)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1383)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1383)
- N Non-Ferrous Materials (1323)
- N1Wrought Aluminum (1320)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1319)
- N3High-Silicon Aluminum Alloys Si >12.2%(977)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (1323)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1319)
- N6Carbon, Graphite Composites, CFRP (1315)
- N7MMC's (1177)
- S High-Temp Alloys (1363)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1361)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1363)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1361)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1340)
- H Hardened Materials (1205)
- H1Hardened Materials 44-48 HRC(1205)
- H2Hardened Materials 48-55 HRC(1205)
- H3Hardened Materials 56-60 HRC(1077)
- H4Hardened Materials >60 HRC(1012)
- C CFRP Materials (1068)
- C1CFRP, CFRP / CFRP (1064)
- C2CFRP / Aluminium CFRP / Non-Ferrous (949)
Applications
Applications
- Chamfer Turning (44)
- Convex Drilling (7)
- Cut-Off (41)
- Deep Grooving (41)
- Drilling (7)
- Face Grooving (41)
- Facing (752)
- Grooving (163)
- ID Facing (6)
- ID Grooving (74)
- ID Thread Turning (128)
- Inclined Entry Drilling (7)
- Inclined Exit Drilling (7)
- Multiple Direction Cutting (899)
- OD Thread Turning (158)
- Plunge Turning (50)
- Profiling (746)
- TRN Boring (712)
- Threading (179)
- Turning (994)
- X-Offset Drilling (7)
Cutting Diameter
Cutting Diameter
- 0.625 in(1)
- 0.687 in(1)
- 0.75 in(1)
- 0.814 in(1)
- 0.875 in(1)
- 0.937 in(1)
- 1.0 in(1)
- 1.063 in(1)
- 1.125 in(1)
- 1.143 in(1)
- 1.22 in(1)
- 1.25 in(1)
- 1.375 in(1)
- 1.5 in(1)
- 1.625 in(1)
- 1.75 in(1)
- 1.875 in(1)
- 2.0 in(1)
to
Cutting Diameter
Cutting Diameter
- 15.875 mm(1)
- 17.45 mm(1)
- 19.05 mm(1)
- 20.651 mm(1)
- 22.225 mm(1)
- 23.8 mm(1)
- 25.401 mm(1)
- 27.0 mm(1)
- 28.576 mm(1)
- 29.0 mm(1)
- 31.0 mm(1)
- 31.75 mm(1)
- 34.926 mm(1)
- 38.1 mm(1)
- 41.276 mm(1)
- 44.45 mm(1)
- 47.625 mm(1)
- 50.801 mm(1)
to
Type of Thread
Type of Thread
- 55 (71)
- 60 (196)
- ACME (148)
- API (99)
- API BUTTRESS (16)
- API RD (106)
- BSPT (55)
- BSW (125)
- BUTTRESS (125)
- M (147)
- NPT (109)
- NPTF (55)
- RD DIN 405 (66)
- STUB ACME (120)
- TR DIN 103 (66)
- UN (180)
- UNJ (109)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (1267)
- Lightly Interrupted Cut (1288)
- Smooth Cut (1289)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 47.625 mm(1)
- 52.401 mm(1)
- 57.151 mm(1)
- 61.901 mm(1)
- 66.675 mm(1)
- 71.45 mm(1)
- 76.2 mm(1)
- 81.0 mm(1)
- 85.726 mm(1)
- 87.0 mm(1)
- 93.0 mm(1)
- 95.25 mm(1)
- 104.775 mm(1)
- 114.301 mm(1)
- 123.825 mm(1)
- 133.35 mm(1)
- 142.875 mm(1)
- 152.4 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 1.875 in(1)
- 2.063 in(1)
- 2.25 in(1)
- 2.437 in(1)
- 2.625 in(1)
- 2.813 in(1)
- 3.0 in(1)
- 3.189 in(1)
- 3.375 in(1)
- 3.426 in(1)
- 3.661 in(1)
- 3.75 in(1)
- 4.125 in(1)
- 4.5 in(1)
- 4.875 in(1)
- 5.25 in(1)
- 5.625 in(1)
- 6.0 in(1)
to
Reach
Reach
- 2.52 in(1)
- 2.835 in(1)
- 2.992 in(1)
- 3.189 in(1)
- 3.386 in(1)
- 3.543 in(1)
- 3.74 in(1)
- 3.781 in(1)
- 4.055 in(1)
- 4.213 in(1)
- 4.331 in(1)
- 4.606 in(1)
- 5.079 in(1)
- 5.472 in(1)
- 6.22 in(1)
- 6.575 in(1)
- 7.165 in(1)
- 7.521 in(1)
to
Reach
Reach
- 64.0 mm(1)
- 72.0 mm(1)
- 76.0 mm(1)
- 81.0 mm(1)
- 86.0 mm(1)
- 90.0 mm(1)
- 95.0 mm(1)
- 96.0 mm(1)
- 103.0 mm(1)
- 107.0 mm(1)
- 110.0 mm(1)
- 117.0 mm(1)
- 129.0 mm(1)
- 139.0 mm(1)
- 158.0 mm(1)
- 167.0 mm(1)
- 182.0 mm(1)
- 191.0 mm(1)
to
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (65)
- 48.0 (14)
- 49.783 (3)
- 50.0 (3)
- 61.0 (2)
- 62.5 (20)
- 63.0 (8)
- 72.5 (3)
- 75.0 (143)
- 85.0 (4)
- 90.0 (359)
- 93.0 (354)
- 95.0 (338)
- 107.5 (82)
to
Connection Style
Connection Style
- Cutoff Support Blade A1-A3 (3)
- KM (973)
Number of Flutes
Number of Flutes
- 2 (18)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (29)
- 1.0 (875)
- 2.0 (917)
- 3.0 (263)
- 4.0 (757)
- 6.0 (130)
- 8.0 (429)
to
Over All Length [L]
Over All Length [L]
- 0.046 in(1)
- 0.591 in(7)
- 0.787 in(88)
- 0.797 in(1)
- 0.984 in(35)
- 0.992 in(2)
- 1.181 in(143)
- 1.379 in(50)
- 1.575 in(137)
- 1.772 in(40)
- 1.811 in(6)
- 1.85 in(8)
- 1.969 in(194)
- 2.165 in(1)
- 2.283 in(3)
- 2.362 in(252)
- 2.757 in(162)
- 3.15 in(32)
- 3.516 in(1)
- 3.543 in(51)
- 3.819 in(2)
- 3.938 in(39)
- 4.0 in(5)
- 4.331 in(43)
- 4.529 in(17)
- 4.724 in(1)
- 4.819 in(2)
- 4.906 in(1)
- 4.921 in(27)
- 5.094 in(1)
- 5.281 in(1)
- 5.469 in(1)
- 5.513 in(56)
- 5.656 in(1)
- 5.844 in(1)
- 5.944 in(1)
- 6.008 in(1)
- 6.219 in(1)
- 6.494 in(1)
- 6.508 in(1)
- 6.694 in(9)
- 6.883 in(1)
- 7.37 in(1)
- 7.758 in(1)
- 8.496 in(1)
- 8.871 in(1)
- 9.443 in(1)
- 9.818 in(1)
to
Over All Length [L]
Over All Length [L]
- 1.175 mm(1)
- 15.0 mm(7)
- 20.0 mm(88)
- 20.25 mm(1)
- 25.0 mm(35)
- 25.201 mm(2)
- 30.0 mm(143)
- 35.0 mm(50)
- 40.0 mm(137)
- 45.0 mm(40)
- 46.0 mm(6)
- 47.0 mm(8)
- 50.0 mm(194)
- 55.0 mm(1)
- 58.0 mm(3)
- 60.0 mm(252)
- 70.0 mm(162)
- 80.0 mm(32)
- 89.301 mm(1)
- 90.0 mm(51)
- 97.0 mm(2)
- 100.0 mm(39)
- 101.601 mm(5)
- 110.0 mm(43)
- 115.0 mm(17)
- 120.0 mm(1)
- 122.4 mm(2)
- 124.625 mm(1)
- 125.0 mm(27)
- 129.4 mm(1)
- 134.15 mm(1)
- 138.925 mm(1)
- 140.0 mm(56)
- 143.675 mm(1)
- 148.425 mm(1)
- 150.951 mm(1)
- 152.6 mm(1)
- 157.951 mm(1)
- 164.951 mm(1)
- 165.3 mm(1)
- 170.0 mm(9)
- 174.826 mm(1)
- 187.201 mm(1)
- 197.05 mm(1)
- 215.8 mm(1)
- 225.326 mm(1)
- 239.851 mm(1)
- 249.375 mm(1)
to
Corner Radius
Corner Radius
- 0.0 in(35)
- 0.001 in(88)
- 0.002 in(227)
- 0.003 in(175)
- 0.004 in(846)
- 0.005 in(71)
- 0.006 in(128)
- 0.007 in(121)
- 0.008 in(887)
- 0.01 in(118)
- 0.011 in(79)
- 0.012 in(77)
- 0.014 in(204)
- 0.015 in(19)
- 0.016 in(1042)
- 0.017 in(16)
- 0.019 in(80)
- 0.02 in(106)
- 0.021 in(7)
- 0.023 in(83)
- 0.024 in(58)
- 0.027 in(3)
- 0.028 in(14)
- 0.03 in(58)
- 0.031 in(1177)
- 0.033 in(5)
- 0.034 in(4)
- 0.035 in(80)
- 0.037 in(19)
- 0.038 in(3)
- 0.039 in(115)
- -0.039 in(29)
- 0.041 in(8)
- 0.047 in(1082)
- 0.049 in(99)
- 0.055 in(5)
- 0.06 in(112)
- 0.062 in(195)
- 0.063 in(901)
- 0.069 in(99)
- 0.078 in(54)
- 0.079 in(84)
- 0.08 in(4)
- 0.089 in(80)
- 0.094 in(179)
- 0.095 in(352)
- 0.098 in(28)
- 0.099 in(2)
- 0.125 in(55)
- 0.126 in(117)
- 0.157 in(29)
- 0.188 in(2)
- 0.197 in(3)
- 0.237 in(4)
- 0.25 in(11)
- 0.315 in(1)
- 0.394 in(3)
- 0.492 in(5)
- 0.63 in(4)
to
Corner Radius
Corner Radius
- 0.0 mm(35)
- 0.025 mm(88)
- 0.05 mm(227)
- 0.076 mm(175)
- 0.1 mm(846)
- 0.125 mm(71)
- 0.151 mm(128)
- 0.176 mm(121)
- 0.2 mm(887)
- 0.225 mm(70)
- 0.25 mm(115)
- 0.275 mm(79)
- 0.301 mm(77)
- 0.325 mm(96)
- 0.351 mm(188)
- 0.375 mm(19)
- 0.4 mm(1042)
- 0.426 mm(16)
- 0.45 mm(80)
- 0.476 mm(26)
- 0.5 mm(106)
- 0.525 mm(7)
- 0.576 mm(83)
- 0.601 mm(58)
- 0.65 mm(3)
- 0.701 mm(14)
- 0.75 mm(58)
- 0.775 mm(99)
- 0.8 mm(1078)
- 0.826 mm(5)
- 0.851 mm(4)
- 0.9 mm(80)
- 0.925 mm(19)
- 0.976 mm(3)
- 1.0 mm(115)
- -1.0 mm(29)
- 1.05 mm(8)
- 1.201 mm(1082)
- 1.25 mm(99)
- 1.401 mm(5)
- 1.5 mm(108)
- 1.526 mm(13)
- 1.576 mm(195)
- 1.6 mm(901)
- 1.75 mm(99)
- 1.975 mm(54)
- 2.0 mm(84)
- 2.025 mm(4)
- 2.25 mm(80)
- 2.375 mm(179)
- 2.401 mm(352)
- 2.5 mm(28)
- 2.526 mm(2)
- 3.176 mm(55)
- 3.2 mm(117)
- 4.0 mm(29)
- 4.775 mm(2)
- 5.0 mm(3)
- 6.0 mm(4)
- 6.351 mm(11)
- 8.0 mm(1)
- 10.0 mm(3)
- 12.5 mm(5)
- 16.0 mm(4)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (605)
- 241 (141)
- AC5 (7)
- ALO (6)
- C2 (6)
- C3 (6)
- CBN6 (6)
- CG4 (3)
- CG5 (53)
- CG6 (18)
- CL4 (406)
- CM1 (53)
- CM2 (603)
- CM3 (440)
- CM4 (283)
- CM5 (7)
- CPD1 (6)
- CPX (590)
- CS5 (18)
- CW2 (278)
- CW2015 (534)
- CW3020 (15)
- CW5025 (599)
- GH1 (36)
- GX (298)
- HCK10 (63)
- HCK20 (14)
- HCM15 (3)
- HK1500 (477)
- HK35 (57)
- HT2 (410)
- HTX (290)
- HWK10 (5)
- HWK15 (66)
- K00326 (29)
- K00331 (27)
- K060 (363)
- K090 (681)
- K1 (235)
- K1010P (36)
- K1025 (4)
- K10M (805)
- K10P (737)
- K10U (712)
- K15 (35)
- K15U (703)
- K20K (813)
- K21 (326)
- K25M (731)
- K25P (721)
- K2885 (99)
- K313 (1184)
- K35P (474)
- K420 (734)
- K45 (425)
- K4H (77)
- K6 (9)
- K68 (1093)
- K8735 (29)
- KB1340 (262)
- KB1345 (449)
- KB1610 (604)
- KB1625 (486)
- KB1630 (501)
- KB5610 (509)
- KB5625 (606)
- KB5630 (409)
- KB9610 (731)
- KB9640 (327)
- KBH10 (657)
- KBH10B (433)
- KBH20 (789)
- KBH20B (433)
- KBK35 (149)
- KBK45 (11)
- KC210 (512)
- KC250 (611)
- KC5010 (1286)
- KC5020P (70)
- KC5025 (1277)
- KC5035 (2)
- KC5410 (1066)
- KC5510 (759)
- KC5525 (496)
- KC710 (328)
- KC7140 (18)
- KC720 (1014)
- KC7215 (18)
- KC722 (296)
- KC7225 (18)
- KC730 (1111)
- KC7310 (816)
- KC732 (840)
- KC7815 (18)
- KC7820 (12)
- KC7845 (6)
- KC7935 (18)
- KC8050 (1076)
- KC810 (1169)
- KC850 (1206)
- KC9010 (916)
- KC9025 (1055)
- KC910 (1072)
- KC9105 (967)
- KC9110 (1229)
- KC9120 (1032)
- KC9125 (1104)
- KC9125RR (71)
- KC9140 (798)
- KC9145 (708)
- KC9210 (108)
- KC9215 (768)
- KC9225 (1033)
- KC9240 (1030)
- KC9240NEW (1020)
- KC9245 (767)
- KC9315 (1046)
- KC9320 (1108)
- KC9325 (938)
- KC935 (1177)
- KC950 (1068)
- KC990 (982)
- KCD25 (356)
- KCK05 (1029)
- KCK05B (857)
- KCK15 (958)
- KCK15B (1002)
- KCK20 (1123)
- KCK20B (1138)
- KCM15 (985)
- KCM15B (905)
- KCM25 (1053)
- KCM25B (979)
- KCM25S (55)
- KCM35 (877)
- KCM35B (613)
- KCMS35 (15)
- KCP05 (947)
- KCP05B (689)
- KCP10 (1098)
- KCP10B (1182)
- KCP15 (18)
- KCP20S (55)
- KCP25 (1112)
- KCP25B (1196)
- KCP25C (1091)
- KCP30 (1015)
- KCP30B (730)
- KCP40 (685)
- KCP40B (775)
- KCPK05 (775)
- KCPK10 (18)
- KCS10 (383)
- KCS10B (967)
- KCS25S (55)
- KCU10 (1228)
- KCU10B (1215)
- KCU25 (1210)
- KCU25B (1043)
- KCU40 (18)
- KD050 (584)
- KD081 (551)
- KD100 (490)
- KD105 (61)
- KD120 (598)
- KD1400 (587)
- KD1405 (402)
- KD1425 (688)
- KM1 (301)
- KMF (162)
- KMS (11)
- KN10S (71)
- KS15 (170)
- KT1120 (161)
- KT125 (631)
- KT150 (460)
- KT175 (812)
- KT315 (1075)
- KT325 (443)
- KT5020 (75)
- KTP10 (818)
- KTP25S (610)
- KU10 (177)
- KU10T (991)
- KU25T (155)
- KU30T (1119)
- KU40D (18)
- KY1310 (500)
- KY1320 (709)
- KY1525 (15)
- KY1540 (406)
- KY1615 (651)
- KY2000 (437)
- KY2100 (336)
- KY2200 (3)
- KY3000 (748)
- KY3400 (583)
- KY3500 (754)
- KY4000 (303)
- KY4300 (333)
- KY4400 (683)
- KYHK15B (693)
- KYK10 (433)
- KYK25 (555)
- KYK35 (737)
- KYS25 (374)
- KYS30 (434)
- MC2 (14)
- MC3 (4)
- NL200 (249)
- NL250 (748)
- NL300 (531)
- NL400 (278)
- NL920 (609)
- P25 (271)
- PB100 (186)
- PB170 (160)
- PB250 (196)
- PB300 (133)
- PD100 (62)
- PD50 (46)
- PN120 (13)
- PS5 (288)
- SP0819 (482)
- SP0A00 (60)
- SP0G00 (8)
- SP0NTA (2)
- SP0PW3 (10)
- SP3019 (424)
- SP4019 (504)
- SP4036 (46)
- SP4066 (11)
- SP4093 (46)
- SP61EJ (71)
- SPADAP (75)
- SPB400 (10)
- SPMQMA (12)
- SPN3W1 (16)
- SPN4W2 (28)
- SPSREJ (21)
- THM (509)
- THM-X (329)
- THMF-X (215)
- TN10P (845)
- TN10U (635)
- TN15M (734)
- TN15U (612)
- TN2000 (516)
- TN20K (764)
- TN20P (811)
- TN30M (773)
- TN30P (585)
- TN4000 (474)
- TN5015 (689)
- TN5020 (612)
- TN5105 (597)
- TN5120 (711)
- TN6010 (559)
- TN6025 (624)
- TN7 (6)
- TN7005 (489)
- TN7010 (744)
- TN7015 (770)
- TN7025 (763)
- TN7035 (601)
- TN7105 (454)
- TN7110 (815)
- TN7115 (737)
- TN7125 (666)
- TN7135 (605)
- TN8025 (714)
- TTI15 (329)
- TTM (38)
- TTM09 (176)
- TTR (308)
- TTR-X (28)
- TTS (378)
- TTX (333)
- W00160 (7)
- W00162 (19)
- W00342 (82)
- WBH10C (556)
- WBH10P (396)
- WBH10U (540)
- WBH20P (571)
- WBH25P (500)
- WBH25U (458)
- WBH30P (396)
- WBK40U (236)
- WBK45U (414)
- WDN00U (311)
- WDN10U (6)
- WDN25U (545)
- WK05CT (773)
- WK15CT (485)
- WK20CT (882)
- WM15CT (860)
- WM25CT (874)
- WM35CT (671)
- WP05CT (183)
- WP15CT (903)
- WP20TT (79)
- WP25CT (929)
- WP35CT (799)
- WS10PT (737)
- WS25PT (747)
- WU05PT (84)
- WU10HT (773)
- WU10PT (610)
- WU25PT (577)
- X00511 (141)
- X00580 (141)
- X00581 (141)
- X00582 (141)
- X00583 (141)
- X00584 (141)
- X00585 (141)
- X00586 (141)
- X00591 (141)
- X00592 (141)
- X00593 (141)
- X00594 (141)
- X00596 (141)
- X00597 (141)
- X00599 (141)
- YY3A00 (6)
- YY72VD (2)
Hand Of Tool
Hand Of Tool
- L (438)
- N (52)
- N - Neutral (3)
- R (483)
Wiper Insert
Wiper Insert
- N (1373)
- Y (550)
Drill Type
Drill Type
- 86-01 (18)
F Dimension
F Dimension
- 0.0 mm(54)
- 1.701 mm(1)
- 2.0 mm(2)
- 4.0 mm(1)
- 5.0 mm(1)
- 5.75 mm(3)
- 5.801 mm(3)
- 7.0 mm(15)
- 7.351 mm(3)
- 7.525 mm(3)
- 8.0 mm(34)
- 9.0 mm(19)
- 10.0 mm(68)
- 11.0 mm(31)
- 12.5 mm(36)
- 13.0 mm(32)
- 16.0 mm(38)
- 17.0 mm(92)
- 22.0 mm(128)
- 24.0 mm(13)
- 25.3 mm(1)
- 27.0 mm(129)
- 28.5 mm(2)
- 30.0 mm(18)
- 32.0 mm(2)
- 35.0 mm(66)
- 38.0 mm(18)
- 43.0 mm(62)
- 48.0 mm(17)
- 53.0 mm(49)
- 59.0 mm(2)
to
F Dimension
F Dimension
- 0.0 in(54)
- 0.067 in(1)
- 0.079 in(2)
- 0.157 in(1)
- 0.197 in(1)
- 0.226 in(3)
- 0.228 in(3)
- 0.276 in(15)
- 0.289 in(3)
- 0.296 in(3)
- 0.315 in(34)
- 0.354 in(19)
- 0.394 in(68)
- 0.433 in(31)
- 0.492 in(36)
- 0.512 in(32)
- 0.63 in(38)
- 0.669 in(92)
- 0.866 in(128)
- 0.946 in(13)
- 0.996 in(1)
- 1.063 in(129)
- 1.122 in(2)
- 1.181 in(18)
- 1.26 in(2)
- 1.379 in(66)
- 1.496 in(18)
- 1.693 in(62)
- 1.891 in(17)
- 2.087 in(49)
- 2.323 in(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(51)
- -1.0 mm(19)
- 11.101 mm(3)
- 11.15 mm(3)
- 13.0 mm(15)
- 14.25 mm(3)
- 16.0 mm(19)
- 18.5 mm(5)
- 20.0 mm(26)
- 25.0 mm(37)
- 32.0 mm(87)
- 34.0 mm(6)
- 40.0 mm(89)
- 41.301 mm(20)
- 44.0 mm(18)
- 47.6 mm(20)
- 50.0 mm(87)
- 54.0 mm(51)
- 56.625 mm(20)
- 57.2 mm(11)
- 60.0 mm(2)
- 63.0 mm(32)
- 64.0 mm(2)
- 70.0 mm(54)
- 74.0 mm(4)
- 80.0 mm(59)
- 86.0 mm(91)
- 88.9 mm(40)
- 90.0 mm(6)
- 94.0 mm(2)
- 100.0 mm(46)
- 104.0 mm(2)
- 106.0 mm(71)
- 118.0 mm(2)
- 120.0 mm(3)
- 139.701 mm(20)
- 150.0 mm(1)
- 174.601 mm(20)
- 209.601 mm(11)
- 222.3 mm(11)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(51)
- -0.039 in(19)
- 0.437 in(3)
- 0.439 in(3)
- 0.512 in(15)
- 0.561 in(3)
- 0.63 in(19)
- 0.728 in(5)
- 0.787 in(26)
- 0.984 in(37)
- 1.26 in(87)
- 1.339 in(6)
- 1.575 in(89)
- 1.627 in(20)
- 1.732 in(18)
- 1.874 in(20)
- 1.969 in(87)
- 2.126 in(51)
- 2.229 in(20)
- 2.253 in(11)
- 2.362 in(2)
- 2.48 in(32)
- 2.52 in(2)
- 2.757 in(54)
- 2.914 in(4)
- 3.15 in(59)
- 3.386 in(91)
- 3.5 in(40)
- 3.543 in(6)
- 3.701 in(2)
- 3.938 in(46)
- 4.094 in(2)
- 4.173 in(71)
- 4.646 in(2)
- 4.724 in(3)
- 5.5 in(20)
- 5.906 in(1)
- 6.875 in(20)
- 8.252 in(11)
- 8.752 in(11)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -0.039 in(29)
- 1.024 in(2)
- 1.063 in(2)
- 1.26 in(10)
- 393.661 in(129)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 mm(29)
- 26.0 mm(2)
- 27.0 mm(2)
- 32.0 mm(10)
- 9999.0 mm(129)
to
Cutting Direction
Cutting Direction
- B (212)
- E (236)
- P (2)
- S (498)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (522)
- DOUBLE POSITIVE (4)
- NEGATIVE-ZERO (74)
- NEUTRAL (ZERO) (305)
- POSITIVE-NEGATIVE (1)
- POSITIVE-ZERO (40)
Maximum Bore Depth
Maximum Bore Depth
- 1.379 in(30)
- 1.385 in(5)
- 1.387 in(2)
- 1.43 in(1)
- 1.508 in(3)
- 1.575 in(82)
- 1.614 in(6)
- 1.655 in(7)
- 1.661 in(7)
- 1.665 in(2)
- 1.701 in(2)
- 1.772 in(19)
- 1.938 in(2)
- 1.969 in(112)
- 1.986 in(2)
- 2.039 in(3)
- 2.165 in(1)
- 2.169 in(15)
- 2.205 in(2)
- 2.209 in(11)
- 2.211 in(2)
- 2.283 in(4)
- 2.362 in(146)
- 2.382 in(4)
- 2.444 in(3)
- 2.757 in(92)
- 2.761 in(2)
- 2.769 in(4)
- 2.77 in(1)
- 2.775 in(6)
- 2.953 in(3)
- 2.955 in(17)
- 2.993 in(8)
- 3.037 in(4)
- 3.044 in(8)
- 3.132 in(1)
- 3.15 in(13)
- 3.152 in(2)
- 3.2 in(4)
- 3.434 in(8)
- 3.446 in(4)
- 3.469 in(2)
- 3.473 in(8)
- 3.476 in(4)
- 3.485 in(2)
- 3.593 in(4)
- 3.594 in(2)
- 3.781 in(12)
- 3.789 in(8)
- 3.907 in(1)
- 3.938 in(8)
- 4.11 in(4)
- 4.412 in(12)
- 4.418 in(2)
- 4.464 in(1)
- 4.529 in(17)
- 4.612 in(10)
- 4.621 in(1)
- 4.724 in(2)
- 4.726 in(4)
- 4.738 in(13)
- 5.513 in(4)
- 5.883 in(8)
to
Maximum Bore Depth
Maximum Bore Depth
- 35.0 mm(30)
- 35.15 mm(5)
- 35.2 mm(2)
- 36.325 mm(1)
- 38.301 mm(3)
- 40.0 mm(82)
- 41.0 mm(6)
- 42.0 mm(5)
- 42.026 mm(2)
- 42.2 mm(7)
- 42.276 mm(2)
- 43.2 mm(2)
- 45.0 mm(19)
- 49.225 mm(2)
- 50.0 mm(112)
- 50.45 mm(2)
- 51.801 mm(3)
- 55.0 mm(1)
- 55.1 mm(15)
- 56.0 mm(2)
- 56.1 mm(11)
- 56.151 mm(2)
- 58.0 mm(4)
- 60.0 mm(146)
- 60.475 mm(4)
- 62.075 mm(3)
- 70.0 mm(80)
- 70.025 mm(12)
- 70.101 mm(2)
- 70.325 mm(4)
- 70.351 mm(1)
- 70.476 mm(6)
- 75.0 mm(3)
- 75.05 mm(17)
- 76.025 mm(8)
- 77.15 mm(4)
- 77.325 mm(8)
- 79.551 mm(1)
- 80.0 mm(13)
- 80.051 mm(2)
- 81.25 mm(4)
- 87.226 mm(8)
- 87.5 mm(4)
- 88.101 mm(2)
- 88.226 mm(8)
- 88.301 mm(4)
- 88.525 mm(2)
- 91.25 mm(4)
- 91.275 mm(2)
- 96.025 mm(12)
- 96.25 mm(8)
- 99.25 mm(1)
- 100.0 mm(8)
- 104.4 mm(4)
- 112.075 mm(12)
- 112.226 mm(2)
- 113.375 mm(1)
- 115.0 mm(17)
- 117.15 mm(10)
- 117.375 mm(1)
- 120.0 mm(2)
- 120.025 mm(4)
- 120.351 mm(13)
- 140.0 mm(4)
- 149.4 mm(8)
to
Boring Bar Material
Boring Bar Material
- C (7)
- S (361)
Front-End
Adapter Front-End
Adapter Front-End
- BORING BAR ADAPTER (89)
- CARTRIDGE MOUNT (47)
- COMBI SHELL ADAPTER (19)
- CUTOFF SUPPORT BLADE (22)
- DRILL CHUCK ADAPTER (4)
- DRILL SHANK 2 FLATS (8)
- END MILL ADAPTER (81)
- ER COLLET CHUCK (42)
- EXTENSION (15)
- HYDRAULIC CHUCK (33)
- HYDRAULIC CHUCK-HIGH TORQUE (4)
- HYDRAULIC CHUCK-SLIM LINE (15)
- KM MODULAR ADAPTER (67)
- KM MODULAR ADAPTER-4 UNITS (2)
- RC TAP CHUCK ADAPTER-T & C (2)
- REDUCER (41)
- SCREW-ON ADAPTER (16)
- SHELL MILL ADAPTER (65)
- SHRINK FIT ADAPTER (48)
- SQUARE SHANK ADAPTER (48)
- SQUARE SHANK ADAPTER-2 SLOTS (2)
- SQUARE SHANK ADAPTER-4 SLOTS (1)
- TAP CHUCK ADAPTER (4)
- WHISTLE DRIVE ADAPTER (3)
- WHISTLE NOTCH ADAPTER (39)
Clamp Style
Clamp Style
- C (28)
- D (119)
- M (470)
- N (180)
- P (242)
- S (319)
- W (2)
- Y (36)
Cutting Width
Cutting Width
- 0.02 in(45)
- 0.031 in(45)
- 0.035 in(45)
- 0.039 in(99)
- 0.041 in(45)
- 0.047 in(99)
- 0.055 in(45)
- 0.058 in(45)
- 0.06 in(106)
- 0.061 in(1)
- 0.062 in(99)
- 0.063 in(1)
- 0.067 in(45)
- 0.069 in(99)
- 0.073 in(54)
- 0.077 in(45)
- 0.078 in(54)
- 0.079 in(107)
- 0.084 in(8)
- 0.088 in(101)
- 0.089 in(73)
- 0.094 in(29)
- 0.095 in(102)
- 0.097 in(57)
- 0.098 in(102)
- 0.104 in(3)
- 0.105 in(54)
- 0.108 in(99)
- 0.11 in(54)
- 0.119 in(134)
- 0.12 in(9)
- 0.122 in(63)
- 0.123 in(9)
- 0.125 in(134)
- 0.126 in(125)
- 0.128 in(99)
- 0.129 in(45)
- 0.13 in(9)
- 0.131 in(26)
- 0.138 in(125)
- 0.143 in(54)
- 0.147 in(22)
- 0.15 in(23)
- 0.151 in(22)
- 0.152 in(45)
- 0.156 in(54)
- 0.157 in(84)
- 0.161 in(4)
- 0.162 in(4)
- 0.167 in(80)
- 0.169 in(54)
- 0.177 in(80)
- 0.178 in(54)
- 0.185 in(67)
- 0.187 in(4)
- 0.188 in(80)
- 0.189 in(80)
- 0.192 in(26)
- 0.193 in(30)
- 0.195 in(54)
- 0.196 in(54)
- 0.197 in(31)
- 0.199 in(2)
- 0.201 in(2)
- 0.202 in(28)
- 0.213 in(26)
- 0.217 in(26)
- 0.218 in(2)
- 0.219 in(26)
- 0.237 in(29)
- 0.25 in(31)
- 0.256 in(26)
- 0.276 in(3)
- 0.281 in(5)
- 0.312 in(5)
- 0.315 in(2)
- 0.345 in(3)
- 0.354 in(3)
- 0.375 in(5)
- 0.381 in(3)
- 0.384 in(2)
to
Cutting Width
Cutting Width
- 0.5 mm(45)
- 0.775 mm(45)
- 0.8 mm(45)
- 0.9 mm(45)
- 1.0 mm(99)
- 1.05 mm(45)
- 1.201 mm(99)
- 1.401 mm(45)
- 1.475 mm(45)
- 1.5 mm(106)
- 1.55 mm(1)
- 1.576 mm(99)
- 1.6 mm(1)
- 1.701 mm(45)
- 1.75 mm(99)
- 1.826 mm(54)
- 1.951 mm(45)
- 1.975 mm(54)
- 2.0 mm(107)
- 2.125 mm(8)
- 2.2 mm(101)
- 2.225 mm(99)
- 2.25 mm(73)
- 2.375 mm(29)
- 2.401 mm(102)
- 2.475 mm(57)
- 2.5 mm(102)
- 2.625 mm(3)
- 2.676 mm(54)
- 2.75 mm(99)
- 2.801 mm(54)
- 3.0 mm(134)
- 3.051 mm(9)
- 3.1 mm(63)
- 3.125 mm(9)
- 3.176 mm(134)
- 3.2 mm(125)
- 3.25 mm(99)
- 3.276 mm(45)
- 3.301 mm(9)
- 3.325 mm(26)
- 3.5 mm(125)
- 3.6 mm(54)
- 3.725 mm(22)
- 3.801 mm(23)
- 3.825 mm(22)
- 3.85 mm(45)
- 3.95 mm(54)
- 3.975 mm(26)
- 4.0 mm(84)
- 4.101 mm(4)
- 4.125 mm(4)
- 4.25 mm(80)
- 4.3 mm(54)
- 4.5 mm(80)
- 4.525 mm(54)
- 4.7 mm(67)
- 4.75 mm(4)
- 4.775 mm(80)
- 4.801 mm(80)
- 4.875 mm(26)
- 4.9 mm(30)
- 4.95 mm(54)
- 4.976 mm(54)
- 5.0 mm(31)
- 5.051 mm(2)
- 5.101 mm(2)
- 5.125 mm(28)
- 5.4 mm(26)
- 5.5 mm(26)
- 5.525 mm(2)
- 5.575 mm(26)
- 6.0 mm(29)
- 6.351 mm(31)
- 6.5 mm(26)
- 7.0 mm(3)
- 7.125 mm(5)
- 7.926 mm(5)
- 8.0 mm(2)
- 8.75 mm(3)
- 9.0 mm(3)
- 9.525 mm(5)
- 9.675 mm(3)
- 9.75 mm(2)
to
Front End Type
Front End Type
- BKA - Boring Head Adapter (7)
- FDA - Milling Cutter Arbor (77)
- KMM - KM Micro System (38)
- KMS - KM TBD System (21)
- KMT - KM Adapter (51)
- MCS - Modular Cartridge System (47)
- PMK - Prismatic Adapter Kenna (22)
- SPK-Holding Arbor-Spindle Head (7)
- SWB - Tap Chuck Adapter (6)
- SZK - Collet Taper (42)
- VKT - Square Shank (51)
- ZYL - Cylindrical Adapter (348)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (320)
- D-DIAMOND/RHOMBIC 55 (330)
- LT-TRIANGLE LAY DOWN THREAD 60 (84)
- N/K-PARALLELOGRAM 55 (4)
- ON EDGE MISC (2)
- PRISMATIC (36)
- R-ROUND (34)
- S-SQUARE 90 (153)
- T-TRIANGLE 60 (115)
- TN-TOP NOTCH (130)
- V-DIAMOND/RHOMBIC 35 (115)
- W-TRIGON 80 (75)
- X-TRIGON 84 (18)
Front End Style
Front End Style
- BKA01 Intchg Heads (H) Pilot (7)
- FDA03 Longit &Transver Drive (2)
- FDA12 Transv Drive&CutRetScr (10)
- FDA13 Long&TranDrv&CutRetScr (10)
- FDA22 Transv Drive & SHCS (44)
- FDA23 Longit&Transv Drv&SHCS (7)
- FDA42TranDrvw/CtrScrwORBoltCir (4)
- KMM01 Std Km-Micro Size (16)
- KMM02 Enlarged Flange (22)
- KMS-01 Std KM-TBD NotOnCntr (8)
- KMS-02 Englarged Flange OnCntr (13)
- KMT00 All KM, except 02,05,09 (51)
- MCS01 Modular Deep Grooving (47)
- PMK02 Cutoff Sup Bld A1-A3 (14)
- PMK03 CutOffBld A1-A3 Hlfw/Pin (8)
- SPK02 Bolt Circ Dia 101.6 mm (7)
- SWB-01 WFL#...WES#(Bilz) (6)
- SZK02 Collets 8 Degree Taper (42)
- VKT01 Std Design (51)
- ZYL01 Straight Shank (105)
- ZYL03 Attachment Thread (16)
- ZYL10 Weldon Shank (71)
- ZYL13 2Deg-Whistle Notch (39)
- ZYL14 Weldon+Whistle Notch (10)
- ZYL22 Boring Bar Shank (96)
- ZYL56 2Plain Clamp Surf w/Pcs (8)
- ZYL63 2Deg Surf w/Cyl.w/drive (3)
Insert Size
Insert Size
- 1 (7)
- 2 (53)
- 2B (3)
- 3 (63)
- 4 (30)
- 5 (5)
- 6 (2)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 in(13)
- 0.119 in(3)
- 0.125 in(1)
- 0.138 in(18)
- 0.177 in(3)
- 0.21 in(27)
- 0.294 in(8)
- 0.299 in(2)
- 0.354 in(1)
- 0.404 in(3)
- 0.416 in(2)
- 0.433 in(1)
- 0.531 in(5)
- 0.551 in(11)
- 0.572 in(2)
- 0.63 in(13)
- 0.748 in(1)
- 0.787 in(1)
- 1.299 in(1)
- 1.581 in(2)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 mm(13)
- 3.0 mm(3)
- 3.176 mm(1)
- 3.5 mm(18)
- 4.5 mm(3)
- 5.325 mm(27)
- 7.476 mm(8)
- 7.601 mm(2)
- 9.0 mm(1)
- 10.25 mm(3)
- 10.55 mm(2)
- 11.0 mm(1)
- 13.5 mm(5)
- 14.0 mm(11)
- 14.5 mm(2)
- 16.0 mm(13)
- 19.0 mm(1)
- 20.0 mm(1)
- 33.0 mm(1)
- 40.151 mm(2)
to
Gage Length
Gage Length
- 4 in(6)
- 3 in(3)
- 5 in(1)
- 0.189 in(6)
- 0.551 in(9)
- 0.63 in(9)
- 0.669 in(1)
- 0.709 in(1)
- 0.787 in(2)
- 0.906 in(4)
- 0.921 in(2)
- 0.984 in(12)
- 1.024 in(11)
- 1.102 in(9)
- 1.113 in(2)
- 1.181 in(21)
- 1.238 in(1)
- 1.26 in(20)
- 1.379 in(4)
- 1.385 in(2)
- 1.389 in(4)
- 1.417 in(2)
- 1.48 in(4)
- 1.496 in(4)
- 1.5 in(1)
- 1.532 in(2)
- 1.575 in(24)
- 1.655 in(1)
- 1.693 in(3)
- 1.77 in(1)
- 1.772 in(21)
- 1.774 in(1)
- 1.846 in(4)
- 1.85 in(7)
- 1.891 in(6)
- 1.901 in(1)
- 1.937 in(2)
- 1.969 in(15)
- 1.971 in(1)
- 1.98 in(2)
- 2.008 in(1)
- 2.106 in(4)
- 2.165 in(18)
- 2.177 in(4)
- 2.244 in(4)
- 2.25 in(2)
- 2.283 in(4)
- 2.299 in(1)
- 2.303 in(7)
- 2.323 in(4)
- 2.362 in(38)
- 2.48 in(4)
- 2.5 in(10)
- 2.559 in(29)
- 2.618 in(4)
- 2.757 in(36)
- 2.758 in(1)
- 2.953 in(14)
- 2.955 in(1)
- 3.055 in(1)
- 3.071 in(2)
- 3.098 in(1)
- 3.15 in(52)
- 3.25 in(2)
- 3.307 in(3)
- 3.346 in(20)
- 3.375 in(1)
- 3.5 in(3)
- 3.516 in(1)
- 3.543 in(30)
- 3.74 in(14)
- 3.75 in(1)
- 3.819 in(4)
- 3.919 in(1)
- 3.93 in(1)
- 3.934 in(1)
- 3.938 in(36)
- 4.083 in(1)
- 4.118 in(2)
- 4.134 in(16)
- 4.291 in(5)
- 4.331 in(5)
- 4.366 in(1)
- 4.488 in(2)
- 4.5 in(4)
- 4.529 in(4)
- 4.532 in(1)
- 4.724 in(18)
- 4.819 in(2)
- 4.874 in(2)
- 4.921 in(3)
- 5.118 in(5)
- 5.276 in(2)
- 5.287 in(1)
- 5.297 in(2)
- 5.394 in(1)
- 5.5 in(2)
- 5.513 in(2)
- 5.787 in(1)
- 5.906 in(1)
- 6.016 in(1)
- 6.299 in(9)
- 6.5 in(1)
- 6.694 in(9)
- 7.362 in(1)
- 8.162 in(1)
- 8.5 in(1)
- 9.055 in(1)
- 9.214 in(1)
- 9.234 in(2)
- 9.589 in(1)
- 11.161 in(1)
- 12.233 in(2)
- 13.161 in(1)
- 14.162 in(1)
- 14.233 in(2)
- 15.161 in(1)
- 15.233 in(2)
- 16.233 in(2)
- 19.162 in(1)
- 20.233 in(2)
Gage Length
Gage Length
- 80 mm(52)
- 60 mm(38)
- 100 mm(36)
- 70 mm(36)
- 90 mm(30)
- 65 mm(29)
- 40 mm(24)
- 30 mm(21)
- 45 mm(21)
- 32 mm(20)
- 85 mm(20)
- 120 mm(18)
- 55 mm(18)
- 105 mm(16)
- 50 mm(15)
- 75 mm(14)
- 95 mm(14)
- 25 mm(12)
- 26 mm(11)
- 14 mm(9)
- 16 mm(9)
- 160 mm(9)
- 170 mm(9)
- 28 mm(9)
- 47 mm(7)
- 48 mm(6)
- 109 mm(5)
- 110 mm(5)
- 130 mm(5)
- 115 mm(4)
- 23 mm(4)
- 35 mm(4)
- 38 mm(4)
- 57 mm(4)
- 58 mm(4)
- 59 mm(4)
- 63 mm(4)
- 97 mm(4)
- 125 mm(3)
- 43 mm(3)
- 84 mm(3)
- 114 mm(2)
- 134 mm(2)
- 140 mm(2)
- 20 mm(2)
- 36 mm(2)
- 78 mm(2)
- 127 mm(1)
- 137 mm(1)
- 147 mm(1)
- 150 mm(1)
- 17 mm(1)
- 18 mm(1)
- 187 mm(1)
- 230 mm(1)
- 234 mm(1)
- 42 mm(1)
- 51 mm(1)
- 4.801 mm(6)
- 23.401 mm(2)
- 28.276 mm(2)
- 31.451 mm(1)
- 35.176 mm(2)
- 35.25 mm(4)
- 37.6 mm(4)
- 38.1 mm(1)
- 38.901 mm(2)
- 44.95 mm(1)
- 45.051 mm(1)
- 46.901 mm(4)
- 48.25 mm(1)
- 49.2 mm(2)
- 50.051 mm(1)
- 50.301 mm(2)
- 53.5 mm(4)
- 55.301 mm(4)
- 57.151 mm(2)
- 58.401 mm(1)
- 58.5 mm(7)
- 63.5 mm(10)
- 66.5 mm(4)
- 70.05 mm(1)
- 75.05 mm(1)
- 76.2 mm(3)
- 77.601 mm(1)
- 78.7 mm(1)
- 82.551 mm(2)
- 85.726 mm(1)
- 88.9 mm(3)
- 89.301 mm(1)
- 95.25 mm(1)
- 99.551 mm(1)
- 99.801 mm(1)
- 99.9 mm(1)
- 101.601 mm(6)
- 103.7 mm(1)
- 104.601 mm(2)
- 110.9 mm(1)
- 114.301 mm(4)
- 115.101 mm(1)
- 122.4 mm(2)
- 123.801 mm(2)
- 134.3 mm(1)
- 134.55 mm(2)
- 139.701 mm(2)
- 152.8 mm(1)
- 165.101 mm(1)
- 207.326 mm(1)
- 215.9 mm(1)
- 234.55 mm(2)
- 243.55 mm(1)
- 283.5 mm(1)
- 310.701 mm(2)
- 334.3 mm(1)
- 359.725 mm(1)
- 361.526 mm(2)
- 385.1 mm(1)
- 386.925 mm(2)
- 412.326 mm(2)
- 486.725 mm(1)
- 513.926 mm(2)
Front End Size
Front End Size
- 0.02 in(1)
- 0.039 in(1)
- 0.098 in(1)
- 0.119 in(1)
- 0.237 in(18)
- 0.25 in(3)
- 0.313 in(3)
- 0.315 in(18)
- 0.375 in(12)
- 0.376 in(1)
- 0.394 in(20)
- 0.438 in(1)
- 0.473 in(29)
- 0.5 in(19)
- 0.551 in(10)
- 0.564 in(1)
- 0.625 in(15)
- 0.63 in(36)
- 0.709 in(9)
- 0.749 in(2)
- 0.75 in(27)
- 0.787 in(40)
- 0.794 in(1)
- 0.866 in(9)
- 0.875 in(1)
- 0.984 in(28)
- 1.0 in(28)
- 1.063 in(11)
- 1.22 in(1)
- 1.221 in(2)
- 1.248 in(2)
- 1.25 in(23)
- 1.26 in(48)
- 1.5 in(17)
- 1.575 in(36)
- 1.75 in(1)
- 1.891 in(1)
- 1.969 in(15)
- 2.0 in(13)
- 2.362 in(2)
- 2.48 in(10)
- 2.5 in(6)
- 3.15 in(4)
to
Front End Size
Front End Size
- 0.5 mm(1)
- 1.0 mm(1)
- 2.5 mm(1)
- 3.0 mm(1)
- 6.0 mm(18)
- 6.351 mm(3)
- 7.95 mm(3)
- 8.0 mm(18)
- 9.525 mm(12)
- 9.55 mm(1)
- 10.0 mm(20)
- 11.125 mm(1)
- 12.0 mm(29)
- 12.701 mm(19)
- 14.0 mm(10)
- 14.3 mm(1)
- 15.875 mm(15)
- 16.0 mm(36)
- 18.0 mm(9)
- 19.026 mm(2)
- 19.05 mm(27)
- 20.0 mm(40)
- 20.175 mm(1)
- 22.0 mm(9)
- 22.225 mm(1)
- 25.0 mm(28)
- 25.401 mm(28)
- 27.0 mm(11)
- 31.0 mm(1)
- 31.026 mm(2)
- 31.701 mm(2)
- 31.75 mm(23)
- 32.0 mm(48)
- 38.1 mm(17)
- 40.0 mm(36)
- 44.45 mm(1)
- 48.0 mm(1)
- 50.0 mm(15)
- 50.801 mm(13)
- 60.0 mm(2)
- 63.0 mm(10)
- 63.5 mm(6)
- 80.0 mm(4)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (933)
- B L (911)
- C A (758)
- C N (865)
- D P (829)
- H T (1088)
- H W (1356)
Back-End
Connection Type
Connection Type
- Cutoff Blade (3)
- TAPER SHANK (973)
System Size
System Size
- KM12 (36)
- KM16 (73)
- KM1612 (1)
- KM20 (52)
- KM2016 (17)
- KM25 (76)
- KM32 (57)
- KM3225 (47)
- KM32TS (24)
- KM40TS (276)
- KM50 (11)
- KM50TS (264)
- KM63TS (304)
- KM63UT (1)
- KM63XMZ (159)
- KM80 (5)
- KM80ATC (108)
- KM80TS (113)
Back-End Diameter
Back-End Diameter
- 10.0 mm(1)
- 12.0 mm(33)
- 12.701 mm(2)
- 14.0 mm(1)
- 15.875 mm(2)
- 16.0 mm(72)
- 17.0 mm(1)
- 18.0 mm(1)
- 19.0 mm(1)
- 19.05 mm(5)
- 20.0 mm(85)
- 22.0 mm(1)
- 24.0 mm(1)
- 25.0 mm(79)
- 25.401 mm(3)
- 31.75 mm(2)
- 32.0 mm(155)
- 38.1 mm(8)
- 40.0 mm(381)
- 50.0 mm(380)
- 63.0 mm(611)
- 80.0 mm(279)
to
Back-End Diameter
Back-End Diameter
- 0.394 in(1)
- 0.473 in(33)
- 0.5 in(2)
- 0.551 in(1)
- 0.625 in(2)
- 0.63 in(72)
- 0.669 in(1)
- 0.709 in(1)
- 0.748 in(1)
- 0.75 in(5)
- 0.787 in(85)
- 0.866 in(1)
- 0.946 in(1)
- 0.984 in(79)
- 1.0 in(3)
- 1.25 in(2)
- 1.26 in(155)
- 1.5 in(8)
- 1.575 in(381)
- 1.969 in(380)
- 2.48 in(611)
- 3.15 in(279)
to
Shank Height
Shank Height
- 0.0 in(4)
- 0.748 in(3)
to
Shank Height
Shank Height
- 0.0 mm(4)
- 19.0 mm(3)
to
Shank Width
Shank Width
- 0.072 in(3)
to
Shank Width
Shank Width
- 1.8 mm(3)
to
No filters matching ""