Bienvenue
Veuillez confirmer vos préférences
Mettre à jour les préférences
Suggestions de produit
Product Family suggestions
Nouveau client
Êtes-vous un nouveau client de Kennametal ? Créez un compte et commencez.
Créer un compteBonjour, User Name
Votre compte sélectionné :
Il y a un problème avec votre compte. Veuillez contacter le service client.
Compte Client Modifier le compte
Compte de livraison Modifier le compte
- Tableau de bord
- Gérer les commandes
- Gérer les canaux
- Carnet d’adresses
Notifications
Mark all as read- Modifier le mot de passe
- Mon profil
- Se déconnecter
Article(s) ajoutées avec succès au panier
Voir le panier
Voir le panier
Usinez plus pour moins cher avec nos promotions! Achetez maintenant
Article(s) ajoutées avec succès au panier
Voir le panier
Voir le panier
Édition de la Solution
Ajout de Solution
Nom de la Solution:{{SolutionName}}- Produits
- /
- Plaquettes pour KDMB • KDMB-LD
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Plaquettes pour KDMB • KDMB-LD
Plaquettes indexables
Features and benefits
- Géométrie positive haute précision.
Gamme KDMB à bout hémisphérique • 6mm
Material Group | Light | General | Heavy | |||
(Light geometry) | (Strong geometry) | |||||
wear | toughness | |||||
Geometry | Grade | Geometry | Grade | Geometry | Grade | |
P1–P2 | .E..GP | KC515M | .E..GP | KC515M | – | – |
P3–P4 | .E..GP | KC505M | .E..GP | KC515M | – | – |
P5–P6 | .E..GP | KC505M | .E..GP | KC515M | – | – |
M1–M2 | .E..GP | KC515M | – | – | – | – |
M3 | .E..GP | KC515M | ||||
K1–K2 | .E..GP | KC515M | .E..GP | KC515M | – | – |
K3 | .E..GP | KC515M | .E..GP | KC515M | – | – |
N1–N2 | .E..LD | K115M | .E..LD | K115M | – | – |
N3 | .E..LD | K115M | .E..LD | K115M | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | .E..LD | K115M | .E..GP | KC515M | – | – |
H1 | .E..GP | KC505M | .E..GP | KC505M | .E..GN | KC505M |
Gamme KDMB à bout hémisphérique • 8mm
Material Group | Light | General | Heavy | |||
(Light geometry) | (Strong geometry) | |||||
wear | toughness | |||||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | .E..GP | KC515M | .E..GP | KC515M | .E..GN | KC530M |
P3–P4 | .E..GP | KC505M | .E..GP | KC515M | .E..GN | KC515M |
P5–P6 | .E..GP | KC505M | .E..GP | KC515M | .E..GN | KC530M |
M1–M2 | .E..GP | KC515M | .E..GN | KC530M | – | – |
M3 | .E..GP | KC515M | .E..GN | KC530M | – | – |
K1–K2 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
K3 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
N1–N2 | .E..LD | K115M | .E..LD | K115M | – | – |
N3 | .E..LD | K115M | .E..LD | K115M | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | .E..LD | K115M | .E..GP | KC515M | – | – |
H1 | .E..GP | KC505M | .E..GP | KC505M | .E..GN | KC505M |
Gamme KDMB à bout hémisphérique • 10mm
Material Group | Light | General | Heavy | |||
(Light geometry) | (Strong geometry) | |||||
wear | toughness | |||||
Geometry | Grade | Geometry | Grade | Geometry | Grade | |
P1–P2 | .E..GP | KC515M | .E..GP | KC515M | .E..GN | KC515M |
P3–P4 | .E..GP | KC505M | .E..GP | KC515M | .E..GN | KC515M |
P5–P6 | .E..GP | KC505M | .E..GP | KC515M | .E..GN | KC530M |
M1–M2 | .E..GP | KC515M | .E..GN | KC530M | .E..GN | KC530M |
M3 | .E..GP | KC515M | .E..GN | KC530M | .E..GN | KC530M |
K1–K2 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
K3 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
N1–N2 | .E..LD | K115M | .E..LD | K115M | – | – |
N3 | .E..LD | K115M | .E..LD | K115M | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | .E..LD | K115M | .E..GP | KC515M | – | – |
H1 | .E..GP | KC505M | .E..GP | KC505M | .E..GN | KC505M |
Gamme KDMB à bout hémisphérique • 12mm
Material Group | Light | General | Heavy | |||
(Light geometry) | (Strong geometry) | |||||
wear | toughness | |||||
Geometry | Grade | Geometry | Grade | Geometry | Grade | |
P1–P2 | .E..GP | KC515M | .E..GP | KC515M | .E..HC | KC530M |
P3–P4 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
P5–P6 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
M1–M2 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
M3 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
K1–K2 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
K3 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
N1–N2 | .E..LD | K115M | .E..LD | K115M | – | – |
N3 | .E..LD | K115M | .E..LD | K115M | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | .E..LD | K115M | .E..GP | KC515M | .E..HC | KC530M |
H1 | .E..GP | KC505M | .E..GP | KC505M | .E..GN | KC505M |
Gamme KDMB à bout hémisphérique • 16mm
Material Group | Light | General | Heavy | |||
(Light geometry) | (Strong geometry) | |||||
wear | toughness | |||||
Geometry | Grade | Geometry | Grade | Geometry | Grade | |
P1–P2 | .E..GP | KC515M | .E..GP | KC515M | .E..HC | KC530M |
P3–P4 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
P5–P6 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
M1–M2 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
M3 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
K1–K2 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
K3 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
N1–N2 | .E..LD | K115M | .E..LD | K115M | – | – |
N3 | .E..LD | K115M | .E..LD | K115M | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | .E..LD | K115M | .E..GP | KC515M | .E..HC | KC530M |
H1 | .E..GP | KC505M | .E..GP | KC505M | .E..GN | KC505M |
Gamme KDMB à bout hémisphérique • 20mm
Material Group | Light | General | Heavy | |||
(Light geometry) | (Strong geometry) | |||||
wear | toughness | |||||
Geometry | Grade | Geometry | Grade | Geometry | Grade | |
P1–P2 | .E..GP | KC515M | .E..GP | KC515M | .E..HC | KC530M |
P3–P4 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
P5–P6 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
M1–M2 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
M3 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
K1–K2 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
K3 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
N1–N2 | .E..LD | K115M | .E..LD | K115M | – | – |
N3 | .E..LD | K115M | .E..LD | K115M | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | .E..LD | K115M | .E..GP | KC515M | .E..HC | KC530M |
H1 | .E..GP | KC505M | .E..GP | KC505M | .E..GN | KC505M |
Gamme KDMB à bout hémisphérique • 25mm
Material Group | Light | General | Heavy | |||
(Light geometry) | (Strong geometry) | |||||
wear | toughness | |||||
Geometry | Grade | Geometry | Grade | Geometry | Grade | |
P1–P2 | .E..GP | KC515M | .E..GP | KC515M | .E..HC | KC530M |
P3–P4 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
P5–P6 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
M1–M2 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
M3 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
K1–K2 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
K3 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
N1–N2 | .E..LD | K115M | .E..LD | K115M | – | – |
N3 | .E..LD | K115M | .E..LD | K115M | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | .E..LD | K115M | .E..GP | KC515M | .E..HC | KC530M |
H1 | .E..GP | KC505M | .E..GP | KC505M | .E..GN | KC505M |
Gamme KDMB à bout hémisphérique • 32mm
Material Group | Light | General | Heavy | |||
(Light geometry) | (Strong geometry) | |||||
wear | toughness | |||||
Geometry | Grade | Geometry | Grade | Geometry | Grade | |
P1–P2 | .E..GP | KC515M | .E..GP | KC515M | .E..HC | KC530M |
P3–P4 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
P5–P6 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
M1–M2 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
M3 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
K1–K2 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
K3 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
N1–N2 | .E..LD | K115M | .E..LD | K115M | – | – |
N3 | .E..LD | K115M | .E..LD | K115M | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | .E..LD | K115M | .E..GP | KC515M | .E..HC | KC530M |
H1 | .E..GP | KC505M | .E..GP | KC505M | .E..GN | KC505M |
KDMB à bout hémisphérique • 6mm
Working Diameter (Dw) at Axial Depth of Cut (ap) | ||||
D1 max | 3,00 | 1,50 | 0,50 | 0,25 |
6,00 | 6,00 | 5,20 | 3,32 | 2,40 |
À une profondeur de coupe axiale (ap) de 3,00
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,12 | 0,17 | 0,29 | 0,09 | 0,13 | 0,22 | 0,08 | 0,11 | 0,19 | 0,07 | 0,10 | 0,18 | 0,07 | 0,10 | 0,18 | .E..LD |
.E..GP | 0,14 | 0,20 | 0,34 | 0,11 | 0,15 | 0,25 | 0,09 | 0,13 | 0,22 | 0,09 | 0,12 | 0,21 | 0,08 | 0,12 | 0,20 | .E..GP |
.E..GN | 0,17 | 0,25 | 0,34 | 0,13 | 0,19 | 0,25 | 0,11 | 0,17 | 0,22 | 0,10 | 0,16 | 0,21 | 0,10 | 0,15 | 0,20 | .E..GN |
À une profondeur de coupe axiale (ap) de 1,50
Light | General | Heavy |
À une profondeur de coupe axiale (ap) de 0,50
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,14 | 0,19 | 0,34 | 0,10 | 0,14 | 0,25 | 0,09 | 0,13 | 0,22 | 0,08 | 0,12 | 0,21 | 0,08 | 0,12 | 0,20 | .E..LD |
.E..GP | 0,16 | 0,23 | 0,39 | 0,12 | 0,17 | 0,29 | 0,11 | 0,15 | 0,26 | 0,10 | 0,14 | 0,24 | 0,10 | 0,14 | 0,23 | .E..GP |
.E..GN | 0,20 | 0,29 | 0,39 | 0,15 | 0,22 | 0,29 | 0,13 | 0,19 | 0,26 | 0,12 | 0,18 | 0,24 | 0,12 | 0,18 | 0,23 | .E..GN |
À une profondeur de coupe axiale (ap) de 0,25
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,30 | 0,42 | 0,74 | 0,22 | 0,31 | 0,55 | 0,19 | 0,27 | 0,48 | 0,18 | 0,26 | 0,45 | 0,18 | 0,25 | 0,44 | .E..LD |
.E..GP | 0,36 | 0,50 | 0,86 | 0,27 | 0,38 | 0,64 | 0,23 | 0,33 | 0,56 | 0,22 | 0,31 | 0,52 | 0,21 | 0,30 | 0,51 | .E..GP |
.E..GN | 0,43 | 0,64 | 0,86 | 0,32 | 0,48 | 0,64 | 0,28 | 0,42 | 0,56 | 0,26 | 0,39 | 0,52 | 0,25 | 0,38 | 0,51 | .E..GN |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,21 | 0,30 | 0,53 | 0,16 | 0,23 | 0,40 | 0,14 | 0,20 | 0,35 | 0,13 | 0,18 | 0,32 | 0,13 | 0,18 | 0,32 | .E..LD |
.E..GP | 0,26 | 0,36 | 0,62 | 0,19 | 0,27 | 0,46 | 0,17 | 0,24 | 0,40 | 0,16 | 0,22 | 0,38 | 0,15 | 0,22 | 0,37 | .E..GP |
.E..GN | 0,31 | 0,46 | 0,62 | 0,23 | 0,35 | 0,46 | 0,20 | 0,30 | 0,40 | 0,19 | 0,28 | 0,38 | 0,18 | 0,28 | 0,37 | .E..GN |
KDMB à bout hémisphérique • 8mm
Working Diameter (Dw) at Axial Depth of Cut (ap) | ||||
D1 max | 4,00 | 1,50 | 0,50 | 0,25 |
8,00 | 8,00 | 6,24 | 3,87 | 2,78 |
À une profondeur de coupe axiale (ap) de 4,00
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,12 | 0,17 | 0,29 | 0,09 | 0,13 | 0,22 | 0,08 | 0,11 | 0,19 | 0,07 | 0,10 | 0,18 | 0,07 | 0,10 | 0,18 | .E..LD |
.E..GP | 0,14 | 0,20 | 0,35 | 0,11 | 0,15 | 0,26 | 0,09 | 0,13 | 0,23 | 0,09 | 0,12 | 0,21 | 0,08 | 0,12 | 0,21 | .E..GP |
.E..GN | 0,17 | 0,25 | 0,43 | 0,13 | 0,19 | 0,32 | 0,11 | 0,17 | 0,28 | 0,10 | 0,16 | 0,26 | 0,10 | 0,15 | 0,25 | .E..GN |
À une profondeur de coupe axiale (ap) de 1,50
Light | General | Heavy |
À une profondeur de coupe axiale (ap) de 0,50
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,15 | 0,21 | 0,38 | 0,11 | 0,16 | 0,28 | 0,10 | 0,14 | 0,24 | 0,09 | 0,13 | 0,23 | 0,09 | 0,13 | 0,22 | .E..LD |
.E..GP | 0,18 | 0,26 | 0,45 | 0,14 | 0,19 | 0,34 | 0,12 | 0,17 | 0,29 | 0,11 | 0,16 | 0,27 | 0,11 | 0,15 | 0,27 | .E..GP |
.E..GN | 0,22 | 0,33 | 0,55 | 0,16 | 0,24 | 0,41 | 0,14 | 0,21 | 0,36 | 0,13 | 0,20 | 0,33 | 0,13 | 0,20 | 0,33 | .E..GN |
À une profondeur de coupe axiale (ap) de 0,25
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,34 | 0,48 | 0,85 | 0,25 | 0,36 | 0,63 | 0,22 | 0,31 | 0,55 | 0,21 | 0,29 | 0,51 | 0,20 | 0,29 | 0,50 | .E..LD |
.E..GP | 0,41 | 0,58 | 1,02 | 0,31 | 0,43 | 0,76 | 0,27 | 0,38 | 0,66 | 0,25 | 0,35 | 0,62 | 0,24 | 0,34 | 0,60 | .E..GP |
.E..GN | 0,49 | 0,74 | 1,23 | 0,37 | 0,55 | 0,92 | 0,32 | 0,48 | 0,80 | 0,30 | 0,45 | 0,75 | 0,29 | 0,44 | 0,73 | .E..GN |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,24 | 0,35 | 0,61 | 0,18 | 0,26 | 0,45 | 0,16 | 0,23 | 0,39 | 0,15 | 0,21 | 0,37 | 0,15 | 0,21 | 0,36 | .E..LD |
.E..GP | 0,29 | 0,41 | 0,73 | 0,22 | 0,31 | 0,54 | 0,19 | 0,27 | 0,47 | 0,18 | 0,25 | 0,44 | 0,18 | 0,25 | 0,43 | .E..GP |
.E..GN | 0,35 | 0,53 | 0,88 | 0,26 | 0,39 | 0,66 | 0,23 | 0,34 | 0,57 | 0,21 | 0,32 | 0,54 | 0,21 | 0,31 | 0,52 | .E..GN |
KDMB à bout hémisphérique • 10mm
Working Diameter (Dw) at Axial Depth of Cut (ap) | ||||
D1 max | 5,00 | 2,00 | 1,00 | 0,50 |
10,00 | 10,00 | 8,00 | 6,00 | 4,36 |
À une profondeur de coupe axiale (ap) de 5,00
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,12 | 0,17 | 0,29 | 0,09 | 0,13 | 0,22 | 0,08 | 0,11 | 0,19 | 0,07 | 0,10 | 0,18 | 0,07 | 0,10 | 0,18 | .E..LD |
.E..GP | 0,14 | 0,20 | 0,35 | 0,11 | 0,15 | 0,26 | 0,09 | 0,13 | 0,23 | 0,09 | 0,12 | 0,21 | 0,08 | 0,12 | 0,21 | .E..GP |
.E..GN | 0,17 | 0,27 | 0,47 | 0,13 | 0,20 | 0,35 | 0,11 | 0,17 | 0,31 | 0,10 | 0,16 | 0,29 | 0,10 | 0,16 | 0,28 | .E..GN |
À une profondeur de coupe axiale (ap) de 2,00
Light | General | Heavy |
À une profondeur de coupe axiale (ap) de 1,00
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,27 | 0,38 | 0,67 | 0,20 | 0,29 | 0,50 | 0,18 | 0,25 | 0,44 | 0,17 | 0,23 | 0,41 | 0,16 | 0,23 | 0,40 | .E..LD |
.E..GP | 0,33 | 0,46 | 0,81 | 0,24 | 0,34 | 0,60 | 0,21 | 0,30 | 0,53 | 0,20 | 0,28 | 0,49 | 0,19 | 0,28 | 0,48 | .E..GP |
.E..GN | 0,39 | 0,62 | 1,08 | 0,29 | 0,46 | 0,81 | 0,25 | 0,40 | 0,70 | 0,24 | 0,37 | 0,66 | 0,23 | 0,37 | 0,64 | .E..GN |
À une profondeur de coupe axiale (ap) de 0,50
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,15 | 0,21 | 0,37 | 0,11 | 0,16 | 0,27 | 0,10 | 0,14 | 0,24 | 0,09 | 0,13 | 0,22 | 0,09 | 0,13 | 0,22 | .E..LD |
.E..GP | 0,18 | 0,25 | 0,44 | 0,13 | 0,19 | 0,33 | 0,12 | 0,16 | 0,29 | 0,11 | 0,15 | 0,27 | 0,11 | 0,15 | 0,26 | .E..GP |
.E..GN | 0,21 | 0,33 | 0,59 | 0,16 | 0,25 | 0,44 | 0,14 | 0,22 | 0,38 | 0,13 | 0,20 | 0,36 | 0,13 | 0,20 | 0,35 | .E..GN |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,20 | 0,28 | 0,49 | 0,15 | 0,21 | 0,37 | 0,13 | 0,18 | 0,32 | 0,12 | 0,17 | 0,30 | 0,12 | 0,17 | 0,29 | .E..LD |
.E..GP | 0,24 | 0,33 | 0,59 | 0,18 | 0,25 | 0,44 | 0,15 | 0,22 | 0,38 | 0,14 | 0,20 | 0,36 | 0,14 | 0,20 | 0,35 | .E..GP |
.E..GN | 0,28 | 0,45 | 0,78 | 0,21 | 0,33 | 0,58 | 0,18 | 0,29 | 0,51 | 0,17 | 0,27 | 0,48 | 0,17 | 0,27 | 0,47 | .E..GN |
KDMB à bout hémisphérique • 12mm
Working Diameter (Dw) at Axial Depth of Cut (ap) | ||||
D1 max | 6,00 | 2,00 | 1,00 | 0,50 |
12,00 | 12,00 | 8,94 | 6,63 | 4,80 |
À une profondeur de coupe axiale (ap) de 6,00
Light | General | Heavy |
À une profondeur de coupe axiale (ap) de 2,00
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,12 | 0,17 | 0,29 | 0,09 | 0,13 | 0,22 | 0,08 | 0,11 | 0,19 | 0,07 | 0,10 | 0,18 | 0,07 | 0,10 | 0,18 | .E..LD |
.E..GP | 0,14 | 0,20 | 0,35 | 0,11 | 0,15 | 0,26 | 0,09 | 0,13 | 0,23 | 0,09 | 0,12 | 0,21 | 0,08 | 0,12 | 0,21 | .E..GP |
.E..GN | 0,17 | 0,27 | 0,47 | 0,13 | 0,20 | 0,35 | 0,11 | 0,17 | 0,31 | 0,10 | 0,16 | 0,29 | 0,10 | 0,16 | 0,28 | .E..GN |
.E..HC | 0,17 | 0,33 | 0,59 | 0,13 | 0,25 | 0,44 | 0,11 | 0,22 | 0,38 | 0,10 | 0,20 | 0,36 | 0,10 | 0,20 | 0,35 | .E..HC |
À une profondeur de coupe axiale (ap) de 1,00
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,16 | 0,22 | 0,39 | 0,12 | 0,17 | 0,29 | 0,10 | 0,15 | 0,26 | 0,10 | 0,14 | 0,24 | 0,09 | 0,13 | 0,23 | .E..LD |
.E..GP | 0,19 | 0,27 | 0,47 | 0,14 | 0,20 | 0,35 | 0,12 | 0,18 | 0,31 | 0,12 | 0,16 | 0,29 | 0,11 | 0,16 | 0,28 | .E..GP |
.E..GN | 0,23 | 0,36 | 0,63 | 0,17 | 0,27 | 0,47 | 0,15 | 0,23 | 0,41 | 0,14 | 0,22 | 0,38 | 0,14 | 0,21 | 0,38 | .E..GN |
.E..HC | 0,23 | 0,45 | 0,79 | 0,17 | 0,34 | 0,59 | 0,15 | 0,29 | 0,51 | 0,14 | 0,27 | 0,48 | 0,14 | 0,27 | 0,47 | .E..HC |
À une profondeur de coupe axiale (ap) de 0,50
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,30 | 0,42 | 0,74 | 0,22 | 0,31 | 0,55 | 0,19 | 0,27 | 0,48 | 0,18 | 0,26 | 0,45 | 0,18 | 0,25 | 0,44 | .E..LD |
.E..GP | 0,36 | 0,50 | 0,88 | 0,27 | 0,38 | 0,66 | 0,23 | 0,33 | 0,57 | 0,22 | 0,31 | 0,54 | 0,21 | 0,30 | 0,53 | .E..GP |
.E..GN | 0,43 | 0,67 | 1,18 | 0,32 | 0,50 | 0,88 | 0,28 | 0,44 | 0,77 | 0,26 | 0,41 | 0,72 | 0,25 | 0,40 | 0,70 | .E..GN |
.E..HC | 0,43 | 0,84 | 1,48 | 0,32 | 0,63 | 1,10 | 0,28 | 0,55 | 0,96 | 0,26 | 0,51 | 0,89 | 0,25 | 0,50 | 0,88 | .E..HC |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,21 | 0,30 | 0,53 | 0,16 | 0,23 | 0,40 | 0,14 | 0,20 | 0,35 | 0,13 | 0,18 | 0,32 | 0,13 | 0,18 | 0,32 | .E..LD |
.E..GP | 0,26 | 0,36 | 0,64 | 0,19 | 0,27 | 0,48 | 0,17 | 0,24 | 0,41 | 0,16 | 0,22 | 0,39 | 0,15 | 0,22 | 0,38 | .E..GP |
.E..GN | 0,31 | 0,48 | 0,85 | 0,23 | 0,36 | 0,64 | 0,20 | 0,32 | 0,55 | 0,19 | 0,30 | 0,52 | 0,18 | 0,29 | 0,51 | .E..GN |
.E..HC | 0,31 | 0,61 | 1,07 | 0,23 | 0,45 | 0,79 | 0,20 | 0,40 | 0,69 | 0,19 | 0,37 | 0,65 | 0,18 | 0,36 | 0,63 | .E..HC |
KDMB à bout hémisphérique • 16mm
Working Diameter (Dw) at Axial Depth of Cut (ap) | ||||
D1 max | 8,00 | 3,00 | 1,50 | 0,75 |
16,00 | 16,00 | 12,49 | 9,33 | 6,76 |
À une profondeur de coupe axiale (ap) de 8,00
Light | General | Heavy |
À une profondeur de coupe axiale (ap) de 3,00
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,12 | 0,17 | 0,29 | 0,09 | 0,13 | 0,22 | 0,08 | 0,11 | 0,19 | 0,07 | 0,10 | 0,18 | 0,07 | 0,10 | 0,18 | .E..LD |
.E..GP | 0,14 | 0,20 | 0,35 | 0,11 | 0,15 | 0,26 | 0,09 | 0,13 | 0,23 | 0,09 | 0,12 | 0,21 | 0,08 | 0,12 | 0,21 | .E..GP |
.E..GN | 0,17 | 0,27 | 0,47 | 0,13 | 0,20 | 0,35 | 0,11 | 0,17 | 0,31 | 0,10 | 0,16 | 0,29 | 0,10 | 0,16 | 0,28 | .E..GN |
.E..HC | 0,17 | 0,33 | 0,59 | 0,13 | 0,25 | 0,44 | 0,11 | 0,22 | 0,38 | 0,10 | 0,20 | 0,36 | 0,10 | 0,20 | 0,35 | .E..HC |
À une profondeur de coupe axiale (ap) de 1,50
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,15 | 0,21 | 0,38 | 0,11 | 0,16 | 0,28 | 0,10 | 0,14 | 0,24 | 0,09 | 0,13 | 0,23 | 0,09 | 0,13 | 0,22 | .E..LD |
.E..GP | 0,18 | 0,26 | 0,45 | 0,14 | 0,19 | 0,34 | 0,12 | 0,17 | 0,29 | 0,11 | 0,16 | 0,27 | 0,11 | 0,15 | 0,27 | .E..GP |
.E..GN | 0,22 | 0,34 | 0,60 | 0,16 | 0,26 | 0,45 | 0,14 | 0,22 | 0,39 | 0,13 | 0,21 | 0,37 | 0,13 | 0,2 | 0,36 | .E..GN |
.E..HC | 0,22 | 0,43 | 0,75 | 0,16 | 0,32 | 0,56 | 0,14 | 0,28 | 0,49 | 0,13 | 0,26 | 0,46 | 0,13 | 0,26 | 0,45 | .E..HC |
À une profondeur de coupe axiale (ap) de 0,75
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,28 | 0,40 | 0,7 | 0,21 | 0,30 | 0,52 | 0,18 | 0,26 | 0,45 | 0,17 | 0,24 | 0,42 | 0,17 | 0,24 | 0,41 | .E..LD |
.E..GP | 0,34 | 0,48 | 0,84 | 0,25 | 0,36 | 0,62 | 0,22 | 0,31 | 0,54 | 0,20 | 0,29 | 0,51 | 0,20 | 0,28 | 0,50 | .E..GP |
.E..GN | 0,40 | 0,64 | 1,12 | 0,30 | 0,47 | 0,83 | 0,26 | 0,41 | 0,72 | 0,25 | 0,39 | 0,68 | 0,24 | 0,38 | 0,66 | .E..GN |
.E..HC | 0,40 | 0,80 | 1,40 | 0,30 | 0,59 | 1,04 | 0,26 | 0,52 | 0,90 | 0,25 | 0,48 | 0,85 | 0,24 | 0,47 | 0,83 | .E..HC |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,20 | 0,29 | 0,50 | 0,15 | 0,21 | 0,38 | 0,13 | 0,19 | 0,33 | 0,12 | 0,18 | 0,31 | 0,12 | 0,17 | 0,30 | .E..LD |
.E..GP | 0,24 | 0,34 | 0,60 | 0,18 | 0,26 | 0,45 | 0,16 | 0,22 | 0,39 | 0,15 | 0,21 | 0,37 | 0,15 | 0,21 | 0,36 | .E..GP |
.E..GN | 0,29 | 0,46 | 0,81 | 0,22 | 0,34 | 0,60 | 0,19 | 0,30 | 0,52 | 0,18 | 0,28 | 0,49 | 0,17 | 0,27 | 0,48 | .E..GN |
.E..HC | 0,29 | 0,58 | 1,01 | 0,22 | 0,43 | 0,75 | 0,19 | 0,37 | 0,66 | 0,18 | 0,35 | 0,61 | 0,17 | 0,34 | 0,60 | .E..HC |
KDMB à bout hémisphérique • 20mm
Working Diameter (Dw) at Axial Depth of Cut (ap) | ||||
D1 max | 10,00 | 3,00 | 1,50 | 0,75 |
20,00 | 20,00 | 14,28 | 10,54 | 7,60 |
À une profondeur de coupe axiale (ap) de 10,00
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,12 | 0,17 | 0,33 | 0,09 | 0,13 | 0,25 | 0,08 | 0,11 | 0,22 | 0,07 | 0,10 | 0,20 | 0,07 | 0,10 | 0,20 | .E..LD |
.E..GP | 0,14 | 0,20 | 0,40 | 0,11 | 0,15 | 0,30 | 0,09 | 0,13 | 0,26 | 0,09 | 0,12 | 0,24 | 0,08 | 0,12 | 0,24 | .E..GP |
.E..GN | 0,17 | 0,27 | 0,54 | 0,13 | 0,20 | 0,40 | 0,11 | 0,17 | 0,35 | 0,10 | 0,16 | 0,33 | 0,10 | 0,16 | 0,32 | .E..GN |
.E..HC | 0,17 | 0,33 | 0,67 | 0,13 | 0,25 | 0,50 | 0,11 | 0,22 | 0,44 | 0,10 | 0,20 | 0,41 | 0,10 | 0,20 | 0,40 | .E..HC |
À une profondeur de coupe axiale (ap) de 3,00
Light | General | Heavy |
À une profondeur de coupe axiale (ap) de 1,50
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,31 | 0,44 | 0,89 | 0,23 | 0,33 | 0,66 | 0,20 | 0,29 | 0,57 | 0,19 | 0,27 | 0,54 | 0,19 | 0,26 | 0,53 | .E..LD |
.E..GP | 0,37 | 0,53 | 1,06 | 0,28 | 0,40 | 0,79 | 0,24 | 0,34 | 0,69 | 0,23 | 0,32 | 0,64 | 0,22 | 0,32 | 0,63 | .E..GP |
.E..GN | 0,45 | 0,71 | 1,43 | 0,33 | 0,53 | 1,06 | 0,29 | 0,46 | 0,92 | 0,27 | 0,43 | 0,86 | 0,27 | 0,42 | 0,84 | .E..GN |
.E..HC | 0,45 | 0,89 | 1,79 | 0,33 | 0,66 | 1,32 | 0,29 | 0,57 | 1,15 | 0,27 | 0,54 | 1,07 | 0,27 | 0,53 | 1,05 | .E..HC |
À une profondeur de coupe axiale (ap) de 0,75
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,17 | 0,23 | 0,47 | 0,12 | 0,18 | 0,35 | 0,11 | 0,15 | 0,31 | 0,10 | 0,14 | 0,29 | 0,10 | 0,14 | 0,28 | .E..LD |
.E..GP | 0,20 | 0,28 | 0,56 | 0,15 | 0,21 | 0,42 | 0,13 | 0,18 | 0,37 | 0,12 | 0,17 | 0,34 | 0,12 | 0,17 | 0,34 | .E..GP |
.E..GN | 0,24 | 0,37 | 0,75 | 0,18 | 0,28 | 0,56 | 0,16 | 0,24 | 0,49 | 0,15 | 0,23 | 0,46 | 0,14 | 0,22 | 0,45 | .E..GN |
.E..HC | 0,24 | 0,47 | 0,94 | 0,18 | 0,35 | 0,70 | 0,16 | 0,31 | 0,61 | 0,15 | 0,29 | 0,57 | 0,14 | 0,28 | 0,56 | .E..HC |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,22 | 0,32 | 0,64 | 0,17 | 0,24 | 0,48 | 0,15 | 0,21 | 0,41 | 0,14 | 0,19 | 0,39 | 0,13 | 0,19 | 0,38 | .E..LD |
.E..GP | 0,27 | 0,38 | 0,77 | 0,20 | 0,29 | 0,57 | 0,18 | 0,25 | 0,50 | 0,16 | 0,23 | 0,47 | 0,16 | 0,23 | 0,46 | .E..GP |
.E..GN | 0,32 | 0,51 | 1,02 | 0,24 | 0,38 | 0,76 | 0,21 | 0,33 | 0,66 | 0,20 | 0,31 | 0,62 | 0,19 | 0,30 | 0,61 | .E..GN |
.E..HC | 0,32 | 0,64 | 1,28 | 0,24 | 0,48 | 0,95 | 0,21 | 0,41 | 0,83 | 0,20 | 0,39 | 0,78 | 0,19 | 0,38 | 0,76 | .E..HC |
KDMB à bout hémisphérique • 25mm
Working Diameter (Dw) at Axial Depth of Cut (ap) | ||||
D1 max | 12,50 | 5,00 | 2,00 | 1,00 |
25,00 | 25,00 | 20,00 | 13,56 | 9,80 |
À une profondeur de coupe axiale (ap) de 12,50
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,12 | 0,17 | 0,29 | 0,09 | 0,13 | 0,22 | 0,08 | 0,11 | 0,19 | 0,07 | 0,10 | 0,18 | 0,07 | 0,10 | 0,18 | .E..LD |
.E..GP | 0,14 | 0,20 | 0,35 | 0,11 | 0,15 | 0,26 | 0,09 | 0,13 | 0,23 | 0,09 | 0,12 | 0,21 | 0,08 | 0,12 | 0,21 | .E..GP |
.E..GN | 0,17 | 0,27 | 0,47 | 0,13 | 0,20 | 0,35 | 0,11 | 0,17 | 0,31 | 0,10 | 0,16 | 0,29 | 0,10 | 0,16 | 0,28 | .E..GN |
.E..HC | 0,17 | 0,33 | 0,59 | 0,13 | 0,25 | 0,44 | 0,11 | 0,22 | 0,38 | 0,10 | 0,20 | 0,36 | 0,10 | 0,20 | 0,35 | .E..HC |
À une profondeur de coupe axiale (ap) de 5,00
Light | General | Heavy |
À une profondeur de coupe axiale (ap) de 2,00
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,15 | 0,21 | 0,37 | 0,11 | 0,16 | 0,27 | 0,10 | 0,14 | 0,24 | 0,09 | 0,13 | 0,22 | 0,09 | 0,13 | 0,22 | .E..LD |
.E..GP | 0,18 | 0,25 | 0,44 | 0,13 | 0,19 | 0,33 | 0,12 | 0,16 | 0,29 | 0,11 | 0,15 | 0,27 | 0,11 | 0,15 | 0,26 | .E..GP |
.E..GN | 0,21 | 0,33 | 0,59 | 0,16 | 0,25 | 0,44 | 0,14 | 0,22 | 0,38 | 0,13 | 0,20 | 0,36 | 0,13 | 0,20 | 0,35 | .E..GN |
.E..HC | 0,21 | 0,42 | 0,73 | 0,16 | 0,31 | 0,55 | 0,14 | 0,27 | 0,48 | 0,13 | 0,26 | 0,45 | 0,13 | 0,25 | 0,44 | .E..HC |
À une profondeur de coupe axiale (ap) de 1,00
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,22 | 0,31 | 0,54 | 0,16 | 0,23 | 0,40 | 0,14 | 0,20 | 0,35 | 0,13 | 0,19 | 0,33 | 0,13 | 0,18 | 0,32 | .E..LD |
.E..GP | 0,26 | 0,37 | 0,65 | 0,20 | 0,28 | 0,48 | 0,17 | 0,24 | 0,42 | 0,16 | 0,23 | 0,40 | 0,16 | 0,22 | 0,39 | .E..GP |
.E..GN | 0,31 | 0,49 | 0,87 | 0,23 | 0,37 | 0,65 | 0,20 | 0,32 | 0,56 | 0,19 | 0,30 | 0,53 | 0,19 | 0,29 | 0,52 | .E..GN |
.E..HC | 0,31 | 0,62 | 1,09 | 0,23 | 0,46 | 0,81 | 0,20 | 0,40 | 0,70 | 0,19 | 0,38 | 0,66 | 0,19 | 0,37 | 0,65 | .E..HC |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,30 | 0,43 | 0,75 | 0,23 | 0,32 | 0,56 | 0,20 | 0,28 | 0,49 | 0,18 | 0,26 | 0,46 | 0,18 | 0,26 | 0,45 | .E..LD |
.E..GP | 0,36 | 0,51 | 0,90 | 0,27 | 0,38 | 0,67 | 0,24 | 0,33 | 0,59 | 0,22 | 0,31 | 0,55 | 0,22 | 0,31 | 0,54 | .E..GP |
.E..GN | 0,43 | 0,69 | 1,21 | 0,32 | 0,51 | 0,90 | 0,28 | 0,45 | 0,78 | 0,26 | 0,42 | 0,73 | 0,26 | 0,41 | 0,71 | .E..GN |
.E..HC | 0,43 | 0,86 | 1,51 | 0,32 | 0,64 | 1,12 | 0,28 | 0,56 | 0,98 | 0,26 | 0,52 | 0,91 | 0,26 | 0,51 | 0,89 | .E..HC |
KDMB à bout hémisphérique • 32mm
Working Diameter (Dw) at Axial Depth of Cut (ap) | ||||
D1 max | 16,00 | 5,00 | 2,00 | 1,00 |
32,00 | 32,00 | 23,24 | 15,49 | 11,14 |
À une profondeur de coupe axiale (ap) de 16,00
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,12 | 0,17 | 0,29 | 0,09 | 0,13 | 0,22 | 0,08 | 0,11 | 0,19 | 0,07 | 0,10 | 0,18 | 0,07 | 0,10 | 0,18 | .E..LD |
.E..GP | 0,14 | 0,20 | 0,35 | 0,11 | 0,15 | 0,26 | 0,09 | 0,13 | 0,23 | 0,09 | 0,12 | 0,21 | 0,08 | 0,12 | 0,21 | .E..GP |
.E..GN | 0,17 | 0,27 | 0,47 | 0,13 | 0,20 | 0,35 | 0,11 | 0,17 | 0,31 | 0,10 | 0,16 | 0,29 | 0,10 | 0,16 | 0,28 | .E..GN |
.E..HC | 0,17 | 0,33 | 0,59 | 0,13 | 0,25 | 0,44 | 0,11 | 0,22 | 0,38 | 0,10 | 0,20 | 0,36 | 0,10 | 0,20 | 0,35 | .E..HC |
À une profondeur de coupe axiale (ap) de 5,00
Light | General | Heavy |
À une profondeur de coupe axiale (ap) de 2,00
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,34 | 0,48 | 0,85 | 0,25 | 0,36 | 0,63 | 0,22 | 0,31 | 0,55 | 0,21 | 0,29 | 0,51 | 0,20 | 0,29 | 0,50 | .E..LD |
.E..GP | 0,41 | 0,58 | 1,02 | 0,31 | 0,43 | 0,76 | 0,27 | 0,38 | 0,66 | 0,25 | 0,35 | 0,62 | 0,24 | 0,34 | 0,60 | .E..GP |
.E..GN | 0,49 | 0,77 | 1,36 | 0,37 | 0,58 | 1,01 | 0,32 | 0,50 | 0,88 | 0,30 | 0,47 | 0,82 | 0,29 | 0,46 | 0,80 | .E..GN |
.E..HC | 0,49 | 0,97 | 1,71 | 0,37 | 0,72 | 1,26 | 0,32 | 0,63 | 1,10 | 0,30 | 0,59 | 1,03 | 0,29 | 0,57 | 1,01 | .E..HC |
À une profondeur de coupe axiale (ap) de 1,00
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,16 | 0,23 | 0,40 | 0,12 | 0,17 | 0,30 | 0,11 | 0,15 | 0,26 | 0,10 | 0,14 | 0,25 | 0,10 | 0,14 | 0,24 | .E..LD |
.E..GP | 0,20 | 0,28 | 0,48 | 0,15 | 0,21 | 0,36 | 0,13 | 0,18 | 0,32 | 0,12 | 0,17 | 0,30 | 0,12 | 0,17 | 0,29 | .E..GP |
.E..GN | 0,23 | 0,37 | 0,65 | 0,18 | 0,28 | 0,48 | 0,15 | 0,24 | 0,42 | 0,14 | 0,22 | 0,39 | 0,14 | 0,22 | 0,39 | .E..GN |
.E..HC | 0,23 | 0,46 | 0,81 | 0,18 | 0,34 | 0,60 | 0,15 | 0,30 | 0,53 | 0,14 | 0,28 | 0,49 | 0,14 | 0,28 | 0,48 | .E..HC |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | 0,24 | 0,35 | 0,61 | 0,18 | 0,26 | 0,45 | 0,16 | 0,23 | 0,39 | 0,15 | 0,21 | 0,37 | 0,15 | 0,21 | 0,36 | .E..LD |
.E..GP | 0,29 | 0,41 | 0,73 | 0,22 | 0,31 | 0,54 | 0,19 | 0,27 | 0,47 | 0,18 | 0,25 | 0,44 | 0,18 | 0,25 | 0,43 | .E..GP |
.E..GN | 0,35 | 0,55 | 0,97 | 0,26 | 0,41 | 0,73 | 0,23 | 0,36 | 0,63 | 0,21 | 0,34 | 0,59 | 0,21 | 0,33 | 0,58 | .E..GN |
.E..HC | 0,35 | 0,69 | 1,22 | 0,26 | 0,52 | 0,91 | 0,23 | 0,45 | 0,79 | 0,21 | 0,42 | 0,74 | 0,21 | 0,41 | 0,72 | .E..HC |
Vitesses de départ recommandées [m/mn]
Material Group | K115M | KC505M | KC515M | KC530M | |||||||||
P | 1 | – | – | – | – | – | – | 330 | 295 | 255 | 275 | 240 | 200 |
2 | – | – | – | – | – | – | 310 | 275 | 240 | 240 | 200 | 165 | |
3 | – | – | – | – | – | – | 275 | 240 | 200 | 200 | 185 | 165 | |
4 | – | – | – | 360 | 260 | 215 | 240 | 200 | 165 | 185 | 165 | 145 | |
5 | – | – | – | 360 | 260 | 215 | 200 | 165 | 130 | 165 | 145 | 130 | |
6 | – | – | – | 350 | 240 | 190 | 165 | 130 | 110 | 130 | 110 | 90 | |
M | 1 | – | – | – | – | – | – | 330 | 275 | 240 | 275 | 220 | 185 |
2 | – | – | – | – | – | – | 275 | 220 | 165 | 185 | 145 | 130 | |
3 | – | – | – | – | – | – | 220 | 185 | 145 | 145 | 130 | 110 | |
K | 1 | 220 | 185 | 145 | – | – | – | 440 | 330 | 220 | – | – | – |
2 | 185 | 145 | 110 | – | – | – | 330 | 255 | 185 | – | – | – | |
3 | 110 | 90 | 75 | – | – | – | 145 | 110 | 75 | – | – | – | |
N | 1–2 | 440 | 330 | 220 | – | – | – | – | – | – | – | – | – |
3 | 295 | 220 | 185 | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
4 | 90 | 70 | 50 | – | – | – | 90 | 70 | 50 | 80 | 60 | 50 | |
H | 1 | – | – | – | 260 | 205 | 170 | 170 | 120 | 95 | – | – | – |