Spiral Circular
Slotting: Shoulder
Surfaçage
Fraisage hélicoïdal
Ramping : Ébauche
Usinage de poches
Lamage
Fraisage en plongée : Bout hémisphérique
Inclined Square End MillDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 5673237 |
| Ref. ISO Catalogue | 7792VXP06CA020Z3R154 |
| Ref. ANSI Catalogue | 7792VXP06CA020Z3R154 |
| [D1MAX] Diamètre de coupe maximal | 20 mm |
| [D1MAX] Diamètre de coupe maximal | .787 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 20 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | .787 in |
| [D1] Diamètre effectif de coupe | 10.85 mm |
| [D1] Diamètre effectif de coupe | .427 in |
| [L] Longueur totale | 200 mm |
| [L] Longueur totale | 7.874 in |
| [L2] Longueur de tête | 32 mm |
| [L2] Longueur de tête | 1.26 in |
| [AP1MAX] 1re profondeur de coupe maximale | 0.9 mm |
| [AP1MAX] 1re profondeur de coupe maximale | .035 in |
| [Z] Nombre de goujures | 3 |
Spiral CircularSlotting: ShoulderSurfaçageFraisage hélicoïdalRamping : ÉbaucheUsinage de pochesLamageFraisage en plongée : Bout hémisphériqueInclined Square End MillCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| 7792 Series • IC06 • Insert Selection Guide | ||||||
| Groupe Matières | Travaux légers | Applications générales | Travaux lourds | |||
| – | (géomètrie légère) | – | (géomètrie solide) | |||
| – | résistance à l’usure |  | ténacité | |||
| – | Géométrie | Nuance | Géométrie | Nuance | Géométrie | Nuance |
| P1-P2 | ...M41 | KCPM40 | ...D41 | SP6519 | ...D41 | X400 |
| P3-P4 | ...M41 | KCPM40 | …D | KC522M | …D | KCPM40 |
| P5-P6 | ...M41 | KCPM40 | ...D41 | X500 | ...D41 | X500 |
| M1-M2 | ...M41 | KCSM40 | ...D41 | KCSM40 | ...D41 | KCSM40 |
| M3 | ...M41 | KCSM40 | ...D41 | KCSM40 | ...D41 | KCSM40 |
| K1-K2 | …D | KCPK30 | …D | KCPK30 | …D | KCPK30 |
| K3 | …D | KCPK30 | …D | KCPK30 | …D | KCPK30 |
| N1-N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1-S2 | ...M41 | KCSM40 | ...D41 | KCSM40 | ...D41 | KCSM40 |
| S3 | ...M41 | KCSM40 | ...D41 | KCSM40 | ...D41 | KCSM40 |
| S4 | ...M41 | KCSM40 | ...D41 | KCSM40 | ...D41 | KCSM40 |
| H1 | …D | KCKP10 | …D | KCKP10 | …D | KCPM40 |
| Avances de départ recommandées [mm] • Grande avance | |||||||
| Géométrie de plaquette | Avance par dent de départ recommandée (Fz) en relation avec le % de l'Engagement Radial (ae) | ||||||
| DOC | 30% | 40–100% | |||||
| (mm) | L | M | H | L | M | H | |
| .S..D | 0,9 | 0,31 | 0,62 | 0,92 | 0,28 | 0,56 | 0,84 |
| .S..D | 0,6 | 0,35 | 0,70 | 1,04 | 0,32 | 0,64 | 0,94 |
| .S..D | 0,5 | 0,38 | 0,75 | 1,12 | 0,34 | 0,69 | 1,02 |
| .E..D41 | 0,9 | 0,17 | 0,46 | 0,77 | 0,16 | 0,42 | 0,70 |
| .E..D41 | 0,6 | 0,19 | 0,52 | 0,87 | 0,18 | 0,48 | 0,79 |
| .E..D41 | 0,5 | 0,21 | 0,56 | 0,94 | 0,19 | 0,52 | 0,85 |
| .E..M41 | 0,8 | 0,17 | 0,46 | 0,77 | 0,16 | 0,42 | 0,70 |
| .E..M41 | 0,6 | 0,19 | 0,52 | 0,87 | 0,18 | 0,48 | 0,79 |
| .E..M41 | 0,5 | 0,21 | 0,56 | 0,94 | 0,19 | 0,52 | 0,85 |
| L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate. | |||||||
| 7792 Series • IC06 • Recommended Starting Feeds for Plunging [mm/th] | ||||
| Géométrie de plaquette |  | Avance par dent (fz) programmée | ||
| L | M | H | ||
| .S..D | 0,10 | 0,20 | 0,30 | |
| .E..D41 | 0,06 | 0,15 | 0,25 | |
| .E..M41 | 0,06 | 0,15 | 0,25 | |
| L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate. | ||||
| 7792 Series • IC06 • Recommended Starting Feeds for Plunging [IPT] | ||||
| Géométrie de plaquette | | Avance par dent (fz) programmée | ||
| L | M | H | ||
| .S..D | 0.004 | 0.008 | 0.012 | |
| .E..D41 | 0.002 | 0.006 | 0.010 | |
| .E..M41 | 0.002 | 0.006 | 0.010 | |
| L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate. | ||||
| Avances de départ recommandées [mm] • Grande avance | |||||||
| Géométrie de plaquette | Avance par dent de départ recommandée (Fz) en relation avec le % de l'Engagement Radial (ae) | ||||||
| DOC | 30% | 40–100% | |||||
| (Inch) | L | M | H | L | M | H | |
| .S..D | 0.035 | 0.012 | 0.024 | 0.036 | 0.011 | 0.022 | 0.033 |
| .S..D | 0.025 | 0.014 | 0.029 | 0.043 | 0.013 | 0.026 | 0.039 |
| .S..D | 0.02 | 0.016 | 0.032 | 0.048 | 0.015 | 0.029 | 0.043 |
| .E..D41 | 0.035 | 0.007 | 0.019 | 0.031 | 0.006 | 0.017 | 0.028 |
| .E..D41 | 0.025 | 0.008 | 0.022 | 0.037 | 0.007 | 0.020 | 0.033 |
| .E..D41 | 0.02 | 0.009 | 0.025 | 0.041 | 0.008 | 0.022 | 0.037 |
| .E..M41 | 0.031 | 0.007 | 0.019 | 0.031 | 0.006 | 0.017 | 0.028 |
| .E..M41 | 0.025 | 0.008 | 0.022 | 0.037 | 0.007 | 0.020 | 0.033 |
| .E..M41 | 0.02 | 0.009 | 0.025 | 0.041 | 0.008 | 0.022 | 0.037 |
| L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate. | |||||||
| 7792 Series IC06 • Recommended Starting Speed [m/min] | |||||||||||||||||||||||||||||||
| nuance | KC510M | KC522M | KCPK30 | KCKP10 | KCPM40 | KCSM40 | SP6519 | SC6525 | X400 | X500 | |||||||||||||||||||||
| Epaisseur copeau hm mm | Mini | Maxi | Mini | Maxi | Mini | Maxi | Mini | Maxi | Mini | Maxi | Mini | Maxi | Mini | Maxi | Mini | Maxi | Mini | Maxi | Mini | Maxi | |||||||||||
| Groupe Matières | Maxi | Départ | Mini | Maxi | Départ | Mini | Maxi | Départ | Mini | Maxi | Départ | Mini | Maxi | Départ | Mini | Maxi | Départ | Mini | Maxi | Départ | Mini | Maxi | Départ | Mini | Maxi | Départ | Mini | Maxi | Départ | Mini | |
| P | 1 | – | – | – | 330 | 285 | 270 | 455 | 395 | 370 | 300 | 295 | 260 | 295 | 260 | 245 | 350 | 320 | 300 | 295 | 215 | 130 | 371 | 254 | 142 | 260 | 190 | 120 | 270 | 200 | 130 |
| 2 | – | – | – | 275 | 240 | 200 | 280 | 255 | 230 | 310 | 275 | 240 | 250 | 215 | 180 | 300 | 270 | 220 | 260 | 190 | 115 | 325 | 225 | 121 | 230 | 170 | 105 | 240 | 280 | 115 | |
| 3 | – | – | – | 255 | 215 | 175 | 255 | 230 | 205 | 275 | 240 | 205 | 230 | 195 | 160 | 280 | 240 | 195 | 230 | 165 | 100 | 292 | 200 | 104 | 200 | 150 | 95 | 210 | 155 | 100 | |
| 4 | 245 | 200 | 170 | 225 | 185 | 150 | 225 | 185 | 160 | 240 | 205 | 160 | 205 | 170 | 135 | 240 | 205 | 165 | 175 | 125 | 75 | 208 | 146 | 79 | 150 | 110 | 70 | 160 | 120 | 75 | |
| 5 | – | – | – | 185 | 170 | 150 | 190 | 170 | 150 | 205 | 160 | 125 | 170 | 155 | 135 | 200 | 180 | 160 | 140 | 105 | 70 | 158 | 121 | 79 | – | – | – | 130 | 100 | 70 | |
| 6 | – | – | – | 165 | 125 | 100 | 160 | 135 | 110 | 160 | 125 | 110 | 150 | 115 | 90 | 180 | 140 | 100 | 120 | 85 | 50 | 142 | 100 | 58 | – | – | – | 110 | 80 | 50 | |
| M | 1 | – | – | – | 205 | 180 | 165 | 205 | 185 | 155 | – | – | – | 195 | 170 | 155 | 260 | 210 | 185 | 270 | 195 | 115 | 192 | 154 | 121 | – | – | – | 250 | 185 | 115 |
| 2 | – | – | – | 185 | 160 | 130 | 185 | 160 | 140 | – | – | – | 175 | 150 | 125 | 235 | 180 | 145 | 235 | 170 | 105 | 258 | 183 | 108 | – | – | – | 220 | 160 | 100 | |
| 3 | – | – | – | 140 | 120 | 95 | 145 | 130 | 115 | – | – | – | 130 | 115 | 90 | 175 | 145 | 110 | 195 | 140 | 85 | 208 | 150 | 92 | – | – | – | 180 | 130 | 80 | |
| K | 1 | 295 | 265 | 240 | 230 | 205 | 185 | 295 | 265 | 240 | 410 | 330 | 240 | – | – | – | – | – | – | – | – | – | 392 | 271 | 146 | – | – | – | – | – | – |
| 2 | 230 | 205 | 190 | 180 | 160 | 150 | 235 | 210 | 190 | 280 | 245 | 190 | – | – | – | – | – | – | – | – | – | 304 | 208 | 117 | – | – | – | – | – | – | |
| 3 | 195 | 175 | 160 | 150 | 135 | 120 | 195 | 175 | 160 | 240 | 195 | 160 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1 | 640 | 570 | 525 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 580 | 535 | 490 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 580 | 535 | 490 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 40 | 35 | 25 | – | – | – | – | – | – | 40 | 35 | 30 | 50 | 40 | 25 | 55 | 40 | 20 | – | – | – | – | – | – | 45 | 35 | 25 |
| 2 | – | – | – | 40 | 35 | 25 | – | – | – | – | – | – | 40 | 35 | 30 | 55 | 40 | 25 | 45 | 35 | 20 | – | – | – | – | – | – | 45 | 30 | 20 | |
| 3 | – | – | – | 50 | 40 | 25 | – | – | – | – | – | – | 50 | 40 | 30 | 65 | 45 | 30 | 55 | 40 | 25 | – | – | – | – | – | – | 50 | 40 | 25 | |
| 4 | – | – | – | 50 | 45 | 35 | 50 | 45 | 35 | – | – | – | 55 | 50 | 35 | 75 | 60 | 40 | 80 | 55 | 35 | – | – | – | – | – | – | 60 | 50 | 35 | |
| H | 1 | 130 | 105 | 80 | 120 | 90 | 70 | – | – | – | 140 | 110 | 90 | – | – | – | – | – | – | – | – | – | – | – | – | 95 | 70 | 45 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 80 | 60 | 35 | – | – | – | |
| Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. | |||||||||||||||||||||||||||||||
| 7792 Series IC06 • Recommended Starting Speed [SFM] | |||||||||||||||||||||||||||||||
| nuance | KC510M | KC522M | KCPK30 | KCKP10 | KCPM40 | KCSM40 | SP6519 | SC6525 | X400 | X500 | |||||||||||||||||||||
| Chip Thickness hex Inch | Mini | Maxi | Mini | Maxi | Mini | Maxi | Mini | Maxi | Mini | Maxi | Mini | Maxi | Mini | Maxi | Mini | Maxi | Mini | Maxi | Mini | Maxi | |||||||||||
| Groupe Matières | Maxi | Départ | Mini | Maxi | Départ | Mini | Maxi | Départ | Mini | Maxi | Départ | Mini | Maxi | Départ | Mini | Maxi | Départ | Mini | Maxi | Départ | Mini | Maxi | Départ | Mini | Maxi | Départ | Mini | Maxi | Départ | Mini | |
| P | 1 | – | – | – | 1085 | 935 | 885 | 1495 | 1295 | 1215 | 985 | 970 | 855 | 970 | 855 | 805 | 1150 | 1050 | 985 | 970 | 705 | 425 | 1217 | 833 | 458 | 855 | 625 | 395 | 885 | 655 | 425 |
| 2 | – | – | – | 900 | 785 | 655 | 920 | 835 | 755 | 1015 | 900 | 785 | 820 | 705 | 590 | 985 | 885 | 720 | 855 | 625 | 375 | 1067 | 742 | 396 | 755 | 560 | 345 | 785 | 920 | 375 | |
| 3 | – | – | – | 835 | 705 | 575 | 835 | 755 | 675 | 900 | 785 | 675 | 755 | 640 | 525 | 920 | 785 | 640 | 755 | 540 | 330 | 950 | 654 | 346 | 655 | 490 | 310 | 690 | 510 | 330 | |
| 4 | 805 | 655 | 560 | 740 | 605 | 490 | 740 | 605 | 525 | 785 | 675 | 525 | 675 | 560 | 445 | 785 | 675 | 540 | 575 | 410 | 245 | 692 | 475 | 258 | 490 | 360 | 230 | 525 | 395 | 245 | |
| 5 | – | – | – | 605 | 560 | 490 | 625 | 560 | 490 | 675 | 525 | 410 | 560 | 510 | 445 | 655 | 590 | 525 | 460 | 345 | 230 | 525 | 396 | 258 | – | – | – | 425 | 330 | 230 | |
| 6 | – | – | – | 540 | 410 | 330 | 525 | 445 | 360 | 525 | 410 | 360 | 490 | 375 | 295 | 590 | 460 | 330 | 395 | 280 | 165 | 458 | 329 | 196 | – | – | – | 360 | 260 | 165 | |
| M | 1 | – | – | – | 675 | 590 | 540 | 675 | 605 | 510 | – | – | – | 640 | 560 | 510 | 855 | 690 | 605 | 885 | 640 | 375 | 625 | 508 | 396 | – | – | – | 820 | 605 | 375 |
| 2 | – | – | – | 605 | 525 | 425 | 605 | 525 | 460 | – | – | – | 575 | 490 | 410 | 770 | 590 | 475 | 770 | 560 | 345 | 854 | 604 | 358 | – | – | – | 720 | 525 | 330 | |
| 3 | – | – | – | 460 | 395 | 310 | 475 | 425 | 375 | – | – | – | 425 | 375 | 295 | 575 | 475 | 360 | 640 | 460 | 280 | 692 | 492 | 296 | – | – | – | 590 | 425 | 260 | |
| K | 1 | 970 | 870 | 785 | 755 | 675 | 605 | 970 | 870 | 785 | 1345 | 1085 | 785 | – | – | – | – | – | – | – | – | – | 1279 | 883 | 475 | – | – | – | – | – | – |
| 2 | 755 | 675 | 625 | 590 | 525 | 490 | 770 | 690 | 625 | 920 | 805 | 625 | – | – | – | – | – | – | – | – | – | 1000 | 692 | 375 | – | – | – | – | – | – | |
| 3 | 640 | 575 | 525 | 490 | 445 | 395 | 640 | 575 | 525 | 785 | 640 | 525 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1 | 2100 | 1870 | 1725 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 1905 | 1755 | 1610 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 1905 | 1755 | 1610 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 130 | 115 | 80 | – | – | – | – | – | – | 130 | 115 | 100 | 165 | 130 | 80 | 180 | 130 | 65 | – | – | – | – | – | – | 150 | 115 | 80 |
| 2 | – | – | – | 130 | 115 | 80 | – | – | – | – | – | – | 130 | 115 | 100 | 180 | 130 | 80 | 150 | 115 | 65 | – | – | – | – | – | – | 150 | 100 | 65 | |
| 3 | – | – | – | 165 | 130 | 80 | – | – | – | – | – | – | 165 | 130 | 100 | 215 | 150 | 100 | 180 | 130 | 80 | – | – | – | – | – | – | 165 | 130 | 80 | |
| 4 | – | – | – | 165 | 150 | 115 | 165 | 150 | 115 | – | – | – | 180 | 165 | 115 | 245 | 195 | 130 | 260 | 180 | 115 | – | – | – | – | – | – | 195 | 165 | 115 | |
| H | 1 | 425 | 345 | 260 | 395 | 295 | 230 | – | – | – | 460 | 360 | 295 | – | – | – | – | – | – | – | – | – | – | – | – | 310 | 230 | 150 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 260 | 195 | 115 | – | – | – | |
| Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. | |||||||||||||||||||||||||||||||
| 7792 Series IC06 • Ramping Application Data • Straight-Edged Inserts • Metric | |||||
| D1 maxi | Angle de coupe (°) | ae maxi | Pas de surfaçage | DH min [mm] - (min hole diameter) | DH min (diamètre d'alésage mini) |
| 16 | 7.0° | 3 | 7.6 | 22 | 30 |
| 20 | 4.3° | 3 | 11.6 | 30 | 38 |
| 25 | 2.6° | 3 | 16.6 | 42 | 50 |
| 32 | 1.7° | 3 | 23.6 | 54 | 62 |
| 35 | 1.3° | 3 | 23.6 | 60 | 68 |
| NOTE: Maximum ramp angle decreases as nose radius increases. | |||||
| 7792 Series IC06 • Ramping Application Data • Curved Edges • Metric | |||||
| D1 maxi | Angle de coupe (°) | ae maxi | Pas de surfaçage | DH min [mm] - (min hole diameter) | DH min (diamètre d'alésage mini) |
| 16 | 5.9° | 3 | 7,6 | 22 | 30 |
| 20 | 3.4° | 3 | 11,6 | 30 | 38 |
| 25 | 2.2° | 3 | 16,6 | 42 | 50 |
| 32 | 1.4° | 3 | 23,6 | 54 | 62 |
| 35 | 1.3° | 3 | 23,6 | 60 | 68 |
| NOTE: Maximum ramp angle decreases as nose radius increases. | |||||
| 7792 Series IC06 • Ramping Application Data • Curved Edges • Inch | |||||
| D1 maxi | Angle de coupe (°) | ae maxi | Pas de surfaçage | DH min [Inch] - (min hole diameter) | DH min (diamètre d'alésage mini) |
| 0.63 | 8.2° | 0.118 | 0.26 | 0.856 | 1.171 |
| 0.75 | 6.7° | 0.118 | 0.38 | 1.106 | 1.421 |
| 1.00 | 4.3° | 0.118 | 0.63 | 1.606 | 1.921 |
| 1.25 | 2.6° | 0.118 | 0.88 | 2.106 | 2.421 |
| NOTE: Maximum ramp angle decreases as nose radius increases. | |||||
| 7792 Series IC06 • Ramping Application Data • Straight-Edged Inserts • Inch | |||||
| D1 maxi | Angle de coupe (°) | ae maxi | Pas de surfaçage | DH min [Inch] - (min hole diameter) | DH min (diamètre d'alésage mini) |
| 0.63 | 7.2° | 0.118 | 0.282 | 0.856 | 1.171 |
| 0.75 | 4.8° | 0.118 | 0.380 | 1.106 | 1.421 |
| 1.00 | 2.5° | 0.118 | 0.630 | 1.606 | 1.921 |
| 1.25 | 1.7° | 0.118 | 0.880 | 2.106 | 2.421 |
| NOTE: Maximum ramp angle decreases as nose radius increases. | |||||
| 7792 Series IC06 • Programing Data • Curved Edges • Metric [mm] | |||
| IC | Rayon de Pointe | R | L |
| 06 | 0,8 | 1,37 | 0,4 |
| 09 | 0,8 | 2,01 | 0,73 |
| 1,2 | 2,27 | 0,67 | |
| 12 | 0,8 | 2,5 | 1,02 |
| 1,2 | 2,73 | 0,97 | |
| 16 | 1,2 | 4,18 | 1,46 |
| 7792 Series IC06 • Programing Data • Straight-Edged Inserts • Metric [mm] | |||
| IC | Rayon de Pointe | R | L |
| 06 | 0,8 | 1,46 | 0,529 |
| 09 | 0,8 | 2,13 | 1,025 |
| 1,2 | 2,25 | 0,95 | |
| 12 | 0,8 | 2,46 | 1,33 |
| 1,2 | 2,79 | 1,27 | |
| 2 | 3,42 | 1,13 | |
| 16 | 1,2 | 3,56 | 1,82 |
| CNC Program • Corner Radius Definition The use of common CAD/CAM systems requires a round insert dimension to be known for cavity machining. For finish pass applications: Wiper facet for finishing use max. feed 0,8mm. | |||
| 7792 Series IC06 • Programing Data • Curved Edges • Inch [inch] | |||
| IC | Rayon de Pointe | R | L |
| 06 | 0.031 | 0.057 | 0.016 |
| 09 | 0.031 | 0.079 | 0.028 |
| 0.047 | 0.089 | 0.026 | |
| 12 | 0.031 | 0.098 | 0.040 |
| 0.047 | 0.107 | 0.038 | |
| 16 | 0.047 | 0.164 | 0.057 |
| 7792 Series IC06 • Programing Data • Straight-Edged Inserts • Inch [inch] | |||
| IC | Rayon de Pointe | R | L |
| 06 | 0.031 | 0.057 | 0.021 |
| 09 | 0.031 | 0.084 | 0.040 |
| 0.047 | 0.088 | 0.037 | |
| 12 | 0.031 | 0.097 | 0.052 |
| 0.047 | 0.109 | 0.050 | |
| 0.079 | 0.134 | 0.044 | |
| 16 | 0.047 | 0.140 | 0.072 |
| CNC Program • Corner Radius Definition The use of common CAD/CAM systems requires a round insert dimension to be known for cavity machining. For finish pass applications: Wiper facet for finishing use max. feed 0.031". | |||
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?