Fresatura in rampa: Grezzo
Scanalatura: Testa sferica
Contornatura/fresatura a spallamento: Testa sferica
Profilatura 3D
Fresatura — Adduzione interna refrigerante
Fresatura — laterale e frontale
Fresatura di tascheDownloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 5302956 |
| ISO Catalog ID | KSRM300R4305S100L197 |
| ANSI Catalog ID | KSRM300R4305S100L197 |
| [D1MAX] Diametro di taglio massimo | 76.2 mm |
| [D1MAX] Diametro di taglio massimo | 3 in |
| [D1] Diametro di taglio effettivo | 63.5 mm |
| [D1] Diametro di taglio effettivo | 2.5 in |
| [D] Dia adattatore / stelo / foro | 25.4 mm |
| [D] Dia adattatore / stelo / foro | 1 in |
| [D6] Diametro mozzo | 69.85 mm |
| [D6] Diametro mozzo | 2.75 in |
| [L] Lunghezza complessiva | 50 mm |
| [L] Lunghezza complessiva | 1.969 in |
| [AP1MAX] 1° profondità di taglio massima | 6.35 mm |
| [AP1MAX] 1° profondità di taglio massima | .25 in |
| Numero di inserti | 5 |
| Massimo angolo di rampa | 6.35 |
| Max giri/min | 24400 |
| Inserto di riferimento | RP_T43____ |
| Peso in libbre | 2.46 |
Fresatura in rampa: GrezzoScanalatura: Testa sfericaContornatura/fresatura a spallamento: Testa sfericaProfilatura 3DFresatura — Adduzione interna refrigeranteFresatura — laterale e frontaleFresatura di tascheCrea una soluzione per calcolare avanzamenti e velocità
Dopo aver creato una soluzione, basta scegliere l'icona Avanzamento e Velocità e il nostro sistema fornirà dei suggerimenti. Puoi personalizzare le informazioni aggiungendo la tua macchina e le specifiche o apportare delle modifiche utilizzando i cursori.
| Material Group | Light | General | Heavy | |||
| – | (Light geometry) | – | (Strong geometry) | |||
| – | wear |  | toughness | |||
| – | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .E..LEJ | KC725M | .E..GE | KC725M | .S..GE | KCPK30 |
| P3–P4 | .E..LEJ | KC725M | .S..GE | KCPK30 | – | – |
| P5–P6 | .E..GE | KCPK30 | .S..GE | KCPK30 | – | – |
| M1–M2 | .E..LEJ | KC725M | .E..LEJ | KC725M | .S..GE | KC725M |
| M3 | .S..GEJ | KC725M | .E..GE | KC725M | .S..GE | KCPK30 |
| K1–K2 | – | – | .S..GE | KCPK30 | – | – |
| K3 | – | – | .S..GE | KCPK30 | – | – |
| N1–N2 | .E..LEJ | KC422M | .E..LEJ | KC422M | .E..LEJ | KC422M |
| N3 | .E..LEJ | KC422M | .E..LEJ | KC422M | .E..LEJ | KC422M |
| S1–S2 | .E..LEJ | KC725M | .S..GEJ | KC725M | .S..GE | KC725M |
| S3 | .E..LEJ | KC725M | .S..GEJ | KC725M | .S..GE | KC725M |
| S4 | .E..LEJ | KC725M | .E..GE | KC725M | .S..GE | KC725M |
| H1 | – | – | .S..GE | KC522M | – | – |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .003 | .005 | .007 | .003 | .004 | .005 | .002 | .003 | .005 | .002 | .003 | .004 | .002 | .003 | .004 | .E..LEJ |
| .E..GE | .006 | .010 | .015 | .004 | .008 | .011 | .004 | .007 | .010 | .004 | .006 | .009 | .004 | .006 | .009 | .E..GE |
| .S..GEJ | .007 | .017 | .023 | .005 | .013 | .017 | .004 | .011 | .015 | .004 | .010 | .014 | .004 | .010 | .014 | .S..GEJ |
| .S..GE | .007 | .017 | .023 | .005 | .013 | .017 | .004 | .011 | .015 | .004 | .010 | .014 | .004 | .010 | .014 | .S..GE |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .004 | .006 | .008 | .003 | .004 | .006 | .003 | .004 | .005 | .002 | .003 | .005 | .002 | .003 | .005 | .E..LEJ |
| .E..GE | .007 | .012 | .017 | .005 | .009 | .013 | .004 | .008 | .011 | .004 | .007 | .010 | .004 | .007 | .010 | .E..GE |
| .S..GEJ | .008 | .020 | .027 | .006 | .015 | .020 | .005 | .013 | .017 | .005 | .012 | .016 | .005 | .012 | .016 | .S..GEJ |
| .S..GE | .008 | .020 | .027 | .006 | .015 | .020 | .005 | .013 | .017 | .005 | .012 | .016 | .005 | .012 | .016 | .S..GE |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .007 | .010 | .015 | .005 | .007 | .011 | .005 | .006 | .009 | .004 | .006 | .009 | .004 | .006 | .009 | .E..LEJ |
| .E..GE | .012 | .021 | .031 | .009 | .016 | .023 | .008 | .014 | .020 | .007 | .013 | .018 | .007 | .012 | .018 | .E..GE |
| .S..GEJ | .014 | .036 | .049 | .010 | .026 | .035 | .009 | .023 | .031 | .008 | .021 | .028 | .008 | .021 | .028 | .S..GEJ |
| .S..GE | .014 | .036 | .049 | .010 | .026 | .035 | .009 | .023 | .031 | .008 | .021 | .028 | .008 | .021 | .028 | .S..GE |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .005 | .007 | .011 | .004 | .005 | .008 | .003 | .005 | .007 | .003 | .004 | .006 | .003 | .004 | .006 | .E..LEJ |
| .E..GE | .009 | .015 | .023 | .007 | .011 | .017 | .006 | .010 | .014 | .005 | .009 | .014 | .005 | .009 | .013 | .E..GE |
| .S..GEJ | .010 | .026 | .035 | .008 | .019 | .026 | .007 | .017 | .022 | .006 | .015 | .021 | .006 | .015 | .020 | .S..GEJ |
| .S..GE | .010 | .026 | .035 | .008 | .019 | .026 | .007 | .017 | .022 | .006 | .015 | .021 | .006 | .015 | .020 | .S..GE |
| Material Group | KC422M | KC522M | KC725M | KCPK30 | |||||||||
| P | 1 | – | – | – | 1300 | 1130 | 1060 | 1030 | 900 | 840 | 1780 | 1560 | 1450 |
| 2 | – | – | – | 1080 | 950 | 790 | 860 | 760 | 640 | 1100 | 1000 | 900 | |
| 3 | – | – | – | 1000 | 840 | 700 | 790 | 670 | 550 | 1000 | 900 | 820 | |
| 4 | – | – | – | 890 | 730 | 590 | 710 | 590 | 470 | 740 | 690 | 620 | |
| 5 | – | – | – | 730 | 660 | 590 | 590 | 530 | 470 | 1020 | 910 | 830 | |
| 6 | – | – | – | 650 | 490 | 400 | 520 | 400 | 310 | 620 | 540 | – | |
| M | 1 | – | – | – | 800 | 710 | 650 | 670 | 590 | 540 | 820 | 720 | 620 |
| 2 | – | – | – | 730 | 620 | 520 | 610 | 520 | 430 | 730 | 640 | 550 | |
| 3 | – | – | – | 550 | 480 | 370 | 460 | 400 | 310 | 570 | 520 | 460 | |
| K | 1 | – | – | – | 900 | 820 | 720 | – | – | – | 1160 | 1050 | 940 |
| 2 | – | – | – | 710 | 640 | 590 | – | – | – | 920 | 830 | 760 | |
| 3 | – | – | – | 590 | 530 | 480 | – | – | – | 770 | 690 | 640 | |
| N | 1–2 | 4220 | 3720 | 3440 | – | – | – | – | – | – | – | – | – |
| 3 | 3720 | 3440 | 3000 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – |
| 2 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | |
| 3 | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | |
| 4 | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | |
| H | 1 | – | – | – | 470 | 360 | 280 | – | – | – | – | – | – |
| catalog number | Maximum Ramp Angle (ra) when hx = .01" and ae | Maximum Ramp Depth (ap) per pass when ae | Maximum Ramp Depth (ap) per pass when hx = .01" and ae ae1 | ae1 | Maximum Plunge Depth (ap) when hx = .01" and ae | ae2 | min hole diameter (DH min) | max flat-bottom hole diameter (DH1 max) | Maximum Hole Diameter (No Flat Bottom) |
| KSRM125R4303C125L600 | 5.30° | .055 | .250 | .406 | .250 | .500 | 1.688 | 2.001 | 2.500 |
| KSRM125R4302C125L600 | 5.95° | .061 | .250 | .413 | .250 | .500 | 1.674 | 2.001 | 2.500 |
| KSRM125R4303C125L1000 | 5.30° | .055 | .250 | .406 | .250 | .500 | 1.688 | 2.001 | 2.500 |
| KSRM125R4302C125L1000 | 5.95° | .061 | .250 | .413 | .250 | .500 | 1.674 | 2.001 | 2.500 |
| KSRM150R4304C125L600 | 4.74° | .069 | .250 | .421 | .250 | .500 | 2.157 | 2.502 | 3.000 |
| KSRM150R4303C125L600 | 5.31° | .077 | .250 | .429 | .250 | .500 | 2.142 | 2.502 | 3.000 |
| KSRM150R4304C125L1000 | 4.74° | .069 | .250 | .421 | .250 | .500 | 2.157 | 2.502 | 3.000 |
| KSRM150R4303C125L1000 | 5.31° | .077 | .250 | .429 | .250 | .500 | 2.142 | 2.502 | 3.000 |
| KSRM125R4303M16L150 | 5.30° | .055 | .250 | .406 | .250 | .500 | 1.688 | 2.001 | 2.500 |
| KSRM125R4302M16L150 | 6.43° | .065 | .250 | .418 | .250 | .500 | 1.665 | 2.001 | 2.500 |
| KSRM150R4304M16L150 | 4.74° | .069 | .250 | .421 | .250 | .500 | 2.157 | 2.502 | 3.000 |
| KSRM150R4303M16L150 | 5.31° | .077 | .250 | .429 | .250 | .500 | 2.142 | 2.502 | 3.000 |
| KSRM200R4305S075L197 | 11.43° | .250 | .250 | .499 | .250 | .500 | 3.001 | 3.501 | 4.000 |
| KSRM200R4303S075L197 | 11.45° | .250 | .250 | .499 | .250 | .500 | 3.001 | 3.501 | 4.000 |
| KSRM250R4306S075L197 | 8.16° | .250 | .250 | .500 | .250 | .500 | 4.001 | 4.500 | 5.000 |
| KSRM250R4304S075L197 | 8.16° | .250 | .250 | .500 | .250 | .500 | 4.001 | 4.500 | 5.000 |
| KSRM300R4307S100L197 | 6.35° | .250 | .250 | .500 | .250 | .500 | 5.001 | 5.500 | 6.000 |
| KSRM300R4305S100L197 | 6.35° | .250 | .250 | .500 | .250 | .500 | 5.001 | 5.500 | 6.000 |
I have read and accepted the Terms & Conditions of use
ISO Catalogo
ANSI Catalogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?