Prodotto simile a :
Mill 16™ • Shell Mill • Wedge Clamping • Fine Pitch • Metric
Face Mill • Cast Iron Machining
Material Number6001976
ISO Catalog IDMILL16D125Z18ON08WANSI Catalog IDMILL16D125Z18ON08W
- P Acciaio
- M Acciai inossidabili
- K Ghisa
- S Leghe resistenti al calore
Spianatura
Fresatura — laterale e frontale
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
- Panoramica
- Dati dell'applicazione
- Downloads
- Parti compatibili lato macchina
- Parti compatibili lato pezzo
- Parti a disposizone
- Revisione
- Q&A
Material Number | 6001976 |
ISO Catalog ID | MILL16D125Z18ON08W |
ANSI Catalog ID | MILL16D125Z18ON08W |
[D1] Diametro di taglio effettivo | 125 mm |
[D1] Diametro di taglio effettivo | 4.921 in |
[D1MAX] Diametro di taglio massimo | 137.55 mm |
[D1MAX] Diametro di taglio massimo | 5.416 in |
[D] Dia adattatore / stelo / foro | 40 mm |
[D] Dia adattatore / stelo / foro | 1.575 in |
[D6] Diametro mozzo | 90 mm |
[D6] Diametro mozzo | 3.543 in |
[L] Lunghezza complessiva | 63 mm |
[L] Lunghezza complessiva | 2.48 in |
[AP1MAX] 1° profondità di taglio massima | 5.5 mm |
[AP1MAX] 1° profondità di taglio massima | .215 in |
Numero di inserti | 18 |
Peso in chilogrammi | 3.18 |
Max giri/min | 6000 |
Materiale da lavorare
- Acciaio
- Acciai inossidabili
- Ghisa
- Leghe resistenti al calore
Uses and application
Spianatura
Fresatura — laterale e frontale
Features and benefits
- Milling cutters for cast iron and compacted graphite iron (CGI) machining.
- Ideal for roughing of engine heads and blocks, housings, gear boxes, etc.
- Insert pocket numbering system.
- High feed rate capability to boost productivity and reduce cycle time.
Crea una soluzione per calcolare avanzamenti e velocità
Dopo aver creato una soluzione, basta scegliere l'icona Avanzamento e Velocità e il nostro sistema fornirà dei suggerimenti. Puoi personalizzare le informazioni aggiungendo la tua macchina e le specifiche o apportare delle modifiche utilizzando i cursori.
Insert Selection
Guida alla selezione degli inserti
Material Group | Light | General | Heavy | |||
– | (Light geometry) | (Strong geometry) | ||||
– | wear | toughness | ||||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | – | – | – | – | – | – |
P3–P4 | – | – | – | – | – | – |
P5–P6 | – | – | – | – | – | – |
M1–M2 | – | – | – | – | – | – |
M3 | – | – | – | – | – | – |
K1–K2 | .E..LE | KC514M | .S..GP | KC514M | .S..HB | KC514M |
K3 | .E..LE | KCK20 | .S..GP | KCK20 | .S..HB | KCK15 |
N1–N2 | – | – | – | – | – | – |
N3 | – | – | – | – | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | – | – | – | – | – | – |
H1 | – | – | – | – | – | – |
Feeds
Avanzamenti iniziali consigliati [mm]
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40 | ||||||||||||
.E..LE | 0,23 | 0,66 | 1,16 | 0,17 | 0,47 | 0,83 | 0,13 | 0,35 | 0,62 | 0,11 | 0,31 | 0,54 | 0,10 | 0,28 | 0,49 | .E..LE |
.S..GP | 0,33 | 0,74 | 1,26 | 0,24 | 0,53 | 0,90 | 0,18 | 0,40 | 0,67 | 0,16 | 0,35 | 0,59 | 0,14 | 0,32 | 0,54 | .S..GP |
.S..HB | 0,33 | 0,84 | 1,35 | 0,24 | 0,60 | 0,97 | 0,18 | 0,45 | 0,72 | 0,16 | 0,39 | 0,63 | 0,14 | 0,36 | 0,57 | .S..HB |
Light | General | Heavy |
Recommended Starting Feeds [IPT]
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40 | ||||||||||||
.E..LE | .009 | .026 | .046 | .007 | .019 | .033 | .005 | .014 | .025 | .004 | .012 | .022 | .004 | .011 | .020 | .E..LE |
.S..GP | .013 | .029 | .049 | .009 | .021 | .035 | .007 | .016 | .026 | .006 | .014 | .023 | .006 | .012 | .021 | .S..GP |
.S..HB | .013 | .033 | .053 | .009 | .024 | .038 | .007 | .018 | .028 | .006 | .015 | .025 | .006 | .014 | .023 | .S..HB |
Light | General | Heavy |
Speeds
Velocità iniziali consigliate [m/min]
Material Group | KC514M | KCK15 | KCK20 | KCPK30 | |||||||||
P | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | – | – | – | – | – | – | |
5 | – | – | – | – | – | – | – | – | – | – | – | – | |
6 | – | – | – | – | – | – | – | – | – | – | – | – | |
M | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
K | 1 | 290 | 190 | 135 | 330 | 220 | 150 | 330 | 220 | 150 | 295 | 265 | 240 |
2 | 225 | 160 | 115 | 250 | 180 | 125 | 250 | 180 | 125 | 235 | 210 | 190 | |
3 | 190 | 135 | 110 | 220 | 150 | 120 | 220 | 150 | 120 | 195 | 175 | 160 | |
S | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | – | – | – | – | – | – |
Recommended Starting Speeds [SFM]
Material Group | KC514M | KCK15 | KCK20 | KCPK30 | |||||||||
P | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | – | – | – | – | – | – | |
5 | – | – | – | – | – | – | – | – | – | – | – | – | |
6 | – | – | – | – | – | – | – | – | – | – | – | – | |
M | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
K | 1 | 955 | 625 | 495 | 1085 | 725 | 495 | 1085 | 725 | 495 | 970 | 870 | 785 |
2 | 745 | 525 | 410 | 820 | 595 | 410 | 820 | 595 | 410 | 770 | 690 | 625 | |
3 | 625 | 445 | 395 | 725 | 495 | 395 | 725 | 495 | 395 | 640 | 575 | 525 | |
S | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use