Helix Angle: 37°/39°
Ramping : Ébauche
Fraisage de côté/avec épaulement : Bout plat
Dimensions de l'outil : Configuration des goujures : 6 
Style de bec : Rayon de becDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 6072218 |
| Ref. ISO Catalogue | UJDV0500Y6CQD |
| Ref. ANSI Catalogue | UJDV0500Y6CQD |
| Nuance | KCSM15 |
| Style adaptateur du côté machine | DUO-LOCK |
| [D] Adaptateur / Queue / Diamètre d’alésage | 12.2 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | .4803 in |
| [AP1MAX] 1re profondeur de coupe maximale | 19.05 mm |
| [AP1MAX] 1re profondeur de coupe maximale | .75 in |
| [L1] Longueur de référence | 28.6 mm |
| [L1] Longueur de référence | 1.126 in |
| [CSMS] Dimension du système Côté machine | DL12 |
| [WF] Largeur du méplat | 9.5 mm |
| [WF] Largeur du méplat | .374 in |
| [Re] Rayon de bec | 2.286 mm |
| [Re] Rayon de bec | .09 in |
| [Z] Nombre de goujures | 6 |
| [D1] Diamètre effectif de coupe | 12.7 mm |
| [D1] Diamètre effectif de coupe | .5 in |
Helix Angle: 37°/39°Ramping : ÉbaucheFraisage de côté/avec épaulement : Bout platDimensions de l'outil : Configuration des goujures : 6 Style de bec : Rayon de becCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Parmak freze toleransları | |
| D1 | Tolerans e8 |
| 13/32 | -0,00126"/-0,00232" |
| 23/32 | -0,00157"/-0,00287" |
| -0,00197''/-0,00350'' | |
| Malzeme grubu |  |  | |||||||||||||||||
| Dik kenar frezeleme (A) | Kısa | Orta | Uzun | Recommended feed per tooth (IPT = inch/th) for side milling (A). | |||||||||||||||
| A | Uygun adaptör | D1 | |||||||||||||||||
| KCSM15 | KCSM15 | KCSM15 | |||||||||||||||||
| Kesme hızı | Kesme hızı | Kesme hızı | frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | 1 1/4 | ||||||||||
| ap | ae | Min. | Maks. | Min. | Maks. | Min. | Maks. | dec. | .3750 | .5000 | .6250 | .7500 | 1.2500 | 1.2500 | |||||
| P | 4 | Ap max | 0.4 x D | 300 | – | 490 | 270 | – | 441 | 270 | – | 441 | IPT | .0017 | .0022 | .0026 | .0029 | .0034 | .0034 |
| 5 | Ap max | 0.4 x D | 200 | – | 330 | 170 | – | 280.5 | 160 | – | 264 | IPT | .0016 | .0020 | .0023 | .0026 | .0033 | .0033 | |
| M | 1 | Ap max | 0.4 x D | 300 | – | 380 | 240 | – | 304 | 210 | – | 266 | IPT | .0019 | .0025 | .0029 | .0033 | .0041 | .0041 |
| 2 | Ap max | 0.4 x D | 200 | – | 260 | 160 | – | 208 | 140 | – | 182 | IPT | .0016 | .0020 | .0023 | .0026 | .0033 | .0033 | |
| 3 | Ap max | 0.4 x D | 200 | – | 230 | 160 | – | 184 | 140 | – | 161 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
| S | 1 | Ap max | 0.4 x D | 160 | – | 300 | 128 | – | 240 | 96 | – | 180 | IPT | .0019 | .0025 | .0029 | .0033 | .0041 | .0041 |
| 2 | Ap max | 0.4 x D | 80 | – | 130 | 64 | – | 104 | 48 | – | 78 | IPT | .0010 | .0013 | .0015 | .0018 | .0022 | .0022 | |
| 3 | Ap max | 0.4 x D | 80 | – | 130 | 64 | – | 104 | 48 | – | 78 | IPT | .0010 | .0013 | .0015 | .0018 | .0022 | .0022 | |
| 4 | Ap max | 0.4 x D | 160 | – | 200 | 128 | – | 160 | 96 | – | 120 | IPT | .0014 | .0018 | .0021 | .0024 | .0030 | .0030 | |
| H | 1 | Ap max | 0.4 x D | 260 | – | 460 | 208 | – | 368 | 156 | – | 276 | IPT | .0017 | .0022 | .0026 | .0029 | .0034 | .0034 |
| 2 | Ap max | 0.4 x D | 230 | – | 390 | 184 | – | 312 | 138 | – | 234 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
| Malzeme grubu | | | |||||||||||||||
| Dik kenar frezeleme (A) | Kısa | Orta | Uzun | Recommended feed per tooth (IPT = inch/th) for side milling (A). | |||||||||||||
| A | Uygun adaptör | D1 | |||||||||||||||
| KCSM15 | KCSM15 | KCSM15 | |||||||||||||||
| Kesme hızı | Kesme hızı | Kesme hızı | frac. | 5/8 | 3/4 | 1 | 1 1/4 | ||||||||||
| ap | ae | Min. | Maks. | Min. | Maks. | Min. | Maks. | dec. | .6250 | .7500 | 1.0000 | 1.2500 | |||||
| P | 5 | Ap max | 0.06 x D | 560 | – | 940 | 504 | – | 846 | 504 | – | 846 | IPT | .0036 | .0040 | .0048 | .0048 |
| 6 | Ap max | 0.06 x D | 370 | – | 620 | 314 | – | 527 | 296 | – | 496 | IPT | .0033 | .0037 | .0047 | .0047 | |
| M | 1 | Ap max | 0.06 x D | 560 | – | 720 | 448 | – | 576 | 392 | – | 504 | IPT | .0041 | .0046 | .0058 | .0058 |
| 2 | Ap max | 0.06 x D | 370 | – | 500 | 296 | – | 400 | 259 | – | 350 | IPT | .0033 | .0037 | .0047 | .0047 | |
| 3 | Ap max | 0.06 x D | 370 | – | 440 | 296 | – | 352 | 259 | – | 308 | IPT | .0027 | .0030 | .0035 | .0035 | |
| S | 1 | Ap max | 0.06 x D | 310 | – | 560 | 248 | – | 448 | 186 | – | 336 | IPT | .0041 | .0046 | .0058 | .0058 |
| 2 | Ap max | 0.06 x D | 310 | – | 560 | 248 | – | 448 | 186 | – | 336 | IPT | .0041 | .0046 | .0058 | .0058 | |
| 3 | Ap max | 0.06 x D | 160 | – | 250 | 128 | – | 200 | 96 | – | 150 | IPT | .0022 | .0025 | .0032 | .0032 | |
| 4 | Ap max | 0.06 x D | 310 | – | 370 | 248 | – | 296 | 186 | – | 222 | IPT | .0030 | .0034 | .0043 | .0043 | |
| H | 1 | Ap max | 0.06 x D | 500 | – | 870 | 400 | – | 696 | 300 | – | 522 | IPT | .0036 | .0040 | .0048 | .0048 |
| 2 | Ap max | 0.06 x D | 440 | – | 750 | 352 | – | 600 | 264 | – | 450 | IPT | .0027 | .0030 | .0035 | .0035 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?