Perçage
Perçage : Entrée inclinée
Perçage : Sortie inclinée
Perçage : Tôles empilées
Dimensions de l'outil : 2 goujures/4 listels/X/lubrifié
Perçage — Arrosage interne
Queue — Cylindrique Classique ≤h6
Angle d'hélice : 0°
Drilling: Cross-Hole DrillingDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 1201043 |
| Ref. ISO Catalogue | K411A04375 |
| Ref. ANSI Catalogue | K411A04375 |
| Nuance | KF1 |
| [D1] Diamètre de foret M | 11.112 mm |
| [D1] Diamètre de foret M | .4375 in |
| [L] Longueur totale | 111 mm |
| [L] Longueur totale | 4.37 in |
| [L3] Longueur de goujures | 66.5 mm |
| [L3] Longueur de goujures | 2.618 in |
| [L4] Profondeur de perçage maximale | 53.1 mm |
| [L4] Profondeur de perçage maximale | 2.09 in |
| [L5] Longueur de pointe du foret | 2.591 mm |
| [L5] Longueur de pointe du foret | .102 in |
| [LS] Longueur de la queue | 42.499 mm |
| [LS] Longueur de la queue | 1.673 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 11.113 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | .4375 in |
PerçagePerçage : Entrée inclinéePerçage : Sortie inclinéePerçage : Tôles empiléesDimensions de l'outil : 2 goujures/4 listels/X/lubrifiéPerçage — Arrosage interneQueue — Cylindrique Classique ≤h6Angle d'hélice : 0°Drilling: Cross-Hole DrillingCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Tolerans • Metrik | ||
| Anma ölçüsü aralığı | D1 Tolerans k6 | D Tolerans h6 |
| 0,001/0,009 | 0,000/-0,008 | |
| 0,001/0,010 | 0,000/-0,009 | |
| 0,001/0,012 | 0,000/-0,011 | |
| 0,002/0,015 | 0,000/-0,013 | |
| Tolerans • İnç | ||
| Anma ölçüsü aralığı | D1 Tolerans k6 | D Tolerans h6 |
| .0000/.0004 | .0000/-.0003 | |
| .0000/.0004 | .0000/-.0004 | |
| .0000/.0005 | .0000/-.0004 | |
| .0000/.0006 | .0000/-.0005 | |
| Kısa | Uzun | Ekstra uzun | |||||||||
| Ø | DIN 6535 | ~3 x D | ~5 x D | ~8 x D | |||||||
| D1 | D | LS min | L | L3 | L4 | L | L3 | L4 | L | L3 | L4 |
| -1.40 | 4 | 28 | 58 | 7 | 5 | 58 | 9 | 6 | 58 | 12 | 10 |
| -1.90 | 4 | 28 | 58 | 9 | 6 | 58 | 12 | 9 | 58 | 18 | 15 |
| -2.30 | 4 | 28 | 58 | 13 | 9 | 58 | 18 | 14 | 66 | 26 | 22 |
| -2.99 | 4 | 28 | 58 | 17 | 12 | 58 | 22 | 17 | 66 | 30 | 25 |
| -3.75 | 6 | 36 | 62 | 20 | 14 | 66 | 28 | 23 | 78 | 40 | 33 |
| -4.75 | 6 | 36 | 66 | 24 | 17 | 74 | 36 | 29 | 87 | 49 | 41 |
| -6.00 | 6 | 36 | 66 | 28 | 20 | 82 | 44 | 35 | 94 | 56 | 48 |
| -7.00 | 8 | 36 | 79 | 34 | 24 | 91 | 53 | 43 | 105 | 67 | 57 |
| -8.00 | 8 | 36 | 79 | 41 | 29 | 91 | 53 | 43 | 110 | 72 | 61 |
| -10.00 | 10 | 40 | 89 | 47 | 35 | 103 | 61 | 49 | 122 | 80 | 68 |
| -12.00 | 12 | 45 | 102 | 55 | 40 | 118 | 71 | 56 | 141 | 94 | 79 |
| -14.00 | 14 | 45 | 107 | 60 | 43 | 124 | 77 | 60 | 155 | 108 | 91 |
| -16.00 | 16 | 48 | 115 | 65 | 45 | 133 | 83 | 63 | 171 | 121 | 101 |
| -18.00 | 18 | 48 | 123 | 73 | 51 | 143 | 93 | 71 | 185 | 135 | 113 |
| -20.00 | 20 | 50 | 131 | 79 | 55 | 153 | 101 | 77 | 200 | 148 | 124 |
| -22.00 | 20 | 50 | 141 | 86 | 60 | 167 | 112 | 85 | 217 | 162 | 136 |
| -25.00 | 25 | 56 | 153 | 95 | 65 | 184 | 126 | 98 | 238 | 180 | 150 |
| Malzeme grubu |  |  | ||||||||||||
| Kesme hızı | Metrik | |||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | |||||||||||||
| Min. | Başlangıç değeri | Maks. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | 25,4 | |||
| K | 1 | 115 | 120 | 140 | mm/dev | 0,11–0,20 | 0,12–0,24 | 0,15–0,28 | 0,18–0,33 | 0,20–0,38 | 0,23–0,44 | 0,30–0,53 | 0,34–0,65 | 0,40–0,76 |
| N | 1 | 100 | 250 | 450 | mm/dev | 0,12–0,25 | 0,13–0,29 | 0,16–0,35 | 0,20–0,42 | 0,26–0,50 | 0,32–0,57 | 0,36–0,69 | 0,42–0,82 | 0,59–0,96 |
| 2 | 200 | 250 | 300 | mm/dev | 0,13–0,21 | 0,14–0,26 | 0,16–0,32 | 0,20–0,37 | 0,27–0,44 | 0,32–0,52 | 0,38–0,64 | 0,44–0,78 | 0,60–0,96 | |
| 3 | 100 | 150 | 300 | mm/dev | 0,11–0,18 | 0,12–0,20 | 0,15–0,24 | 0,18–0,30 | 0,20–0,38 | 0,23–0,44 | 0,30–0,53 | 0,34–0,65 | 0,40–0,76 | |
| 4 | 100 | 170 | 250 | mm/dev | 0,10–0,16 | 0,12–0,20 | 0,14–0,26 | 0,16–0,28 | 0,18–0,32 | 0,20–0,36 | 0,22–0,40 | 0,24–0,44 | 0,28–0,50 | |
| Malzeme grubu | | | ||||||||||||
| Malzeme grubu | Kesme hızı | İnç | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | |||||||||||||
| Min. | Başlangıç değeri | Maks. | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | 1/1 1,000 | |||
| K | 1 | 380 | 390 | 460 | IPR | .004–.008 | .005–.009 | .006–.011 | .007–.013 | .008–.015 | .009–.017 | .012–.021 | .013–.026 | .016–.030 |
| N | 1 | 330 | 820 | 1480 | IPR | .005–.010 | .005–.011 | .006–.014 | .008–.017 | .010–.020 | .013–.022 | .014–.027 | .017–.032 | .023–.038 |
| 2 | 660 | 820 | 980 | IPR | .005–.008 | .006–.010 | .006–.013 | .008–.015 | .011–.017 | .013–.021 | .015–.025 | .017–.031 | .024–.038 | |
| 3 | 330 | 490 | 980 | IPR | .004–.007 | .005–.008 | .006–.009 | .007–.012 | .008–.015 | .009–.017 | .012–.021 | .013–.026 | .016–.030 | |
| 4 | 330 | 560 | 820 | IPR | .004–.006 | .005–.008 | .006–.010 | .006–.011 | .007–.013 | .008–.014 | .009–.016 | .009–.017 | .011–.020 | |
| | |||||||||||||
| Kesme hızı | Metrik | |||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | |||||||||||||
| Malzeme grubu | Min. | Başlangıç değeri | Maks. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | 25,4 | ||
| K | 1 | 115 | 60 | 140 | mm/dev | 0,11–0,20 | 0,12–0,24 | 0,15–0,28 | 0,18–0,33 | 0,20–0,38 | 0,23–0,44 | 0,30–0,53 | 0,34–0,65 | 0,40–0,76 |
| N | 1 | 100 | 250 | 450 | mm/dev | 0,16–0,25 | 0,19–0,29 | 0,23–0,35 | 0,27–0,42 | 0,31–0,50 | 0,36–0,57 | 0,44–0,69 | 0,52–0,82 | 0,62–0,96 |
| 2 | 200 | 100 | 300 | mm/dev | 0,15–0,23 | 0,17–0,28 | 0,21–0,34 | 0,25–0,39 | 0,30–0,46 | 0,34–0,54 | 0,42–0,67 | 0,52–0,82 | 0,61–0,96 | |
| 4 | 100 | 170 | 250 | mm/dev | 0,16–0,28 | 0,15–0,32 | 0,19–0,36 | 0,23–0,40 | 0,25–0,44 | 0,28–0,48 | 0,32–0,56 | 0,35–0,63 | 0,42–0,72 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?