Deep-Hole Drilling (up to 10xD) • HTS systems

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (278)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(278)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(278)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(278)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(278)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(278)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(278)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(278)
    • M Stainless Steel (277)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(277)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(277)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(277)
    • K Cast Iron (291)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(291)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(291)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(291)
    • N Non-Ferrous Materials (242)
      • N1
        Wrought Aluminum (242)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(242)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(238)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (242)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (242)
      • N6
        Carbon, Graphite Composites, CFRP (242)
      • N7
        MMC's (222)
    • S High-Temp Alloys (267)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(267)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(267)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(267)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(267)
    • H Hardened Materials (113)
      • H1
        Hardened Materials 44-48 HRC(113)
      • H2
        Hardened Materials 48-55 HRC(113)
      • H3
        Hardened Materials 56-60 HRC(113)
      • H4
        Hardened Materials >60 HRC(113)
    Select First Choice
    • BR (21)
    • CN (69)
    • DE (69)
    • GB (53)
    • IN (29)
    • SG (52)
    • US (69)
    Applications
    Applications
    • Convex DrillingConvex Drilling (1)
    • DrillingDrilling (61)
    Cutting Diameter
    Cutting Diameter
    • 0.197 in(1)
    • 0.237 in(1)
    • 0.315 in(7)
    • 0.394 in(7)
    • 0.591 in(3)
    • 0.787 in(3)
    • 0.984 in(3)
    • 1.181 in(3)
    • 1.575 in(1)
    • 1.693 in(1)
    • 1.772 in(1)
    • 1.811 in(1)
    • 1.929 in(1)
    • 1.969 in(1)
    • 2.047 in(1)
    • 2.165 in(1)
    • 2.283 in(1)
    • 2.48 in(2)
    • 2.677 in(1)
    • 2.874 in(1)
    • 3.071 in(2)
    • 3.307 in(1)
    • 3.543 in(1)
    • 3.781 in(2)
    • 4.016 in(1)
    • 4.252 in(1)
    • 4.529 in(1)
    • 4.803 in(1)
    • 5.118 in(1)
    • 5.513 in(1)
    • 5.906 in(1)
    • 6.22 in(1)
    • 6.378 in(1)
    • 7.087 in(1)
    • 7.678 in(1)
    • 8.387 in(1)
    • 9.055 in(1)
    • 10.236 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 5.0 mm(1)
    • 6.0 mm(1)
    • 8.0 mm(7)
    • 10.0 mm(7)
    • 15.0 mm(3)
    • 20.0 mm(3)
    • 25.0 mm(3)
    • 30.0 mm(3)
    • 40.0 mm(1)
    • 43.0 mm(1)
    • 45.0 mm(1)
    • 46.0 mm(1)
    • 49.0 mm(1)
    • 50.0 mm(1)
    • 52.0 mm(1)
    • 55.0 mm(1)
    • 58.0 mm(1)
    • 63.0 mm(2)
    • 68.0 mm(1)
    • 73.0 mm(1)
    • 78.0 mm(2)
    • 84.0 mm(1)
    • 90.0 mm(1)
    • 96.0 mm(2)
    • 102.0 mm(1)
    • 108.0 mm(1)
    • 115.0 mm(1)
    • 122.0 mm(1)
    • 130.0 mm(1)
    • 140.0 mm(1)
    • 150.0 mm(1)
    • 158.0 mm(1)
    • 162.0 mm(1)
    • 180.0 mm(1)
    • 195.0 mm(1)
    • 213.0 mm(1)
    • 230.0 mm(1)
    • 260.0 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Condition
    Cutting Condition
    • Interrupted (114)
    • Stable (188)
    • Unstable (136)
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 8.0 mm(2)
    • 9.601 mm(1)
    • 10.0 mm(2)
    • 11.3 mm(1)
    • 430.0 mm(1)
    • 460.0 mm(1)
    • 490.0 mm(1)
    • 500.0 mm(1)
    • 520.0 mm(1)
    • 550.0 mm(2)
    • 580.0 mm(1)
    • 630.0 mm(1)
    • 680.0 mm(2)
    • 750.0 mm(7)
    • 780.0 mm(3)
    • 1000.0 mm(5)
    • 1060.0 mm(3)
    • 1360.0 mm(4)
    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 0.315 in(2)
    • 0.378 in(1)
    • 0.394 in(2)
    • 0.445 in(1)
    • 16.93 in(1)
    • 18.11 in(1)
    • 19.291 in(1)
    • 19.685 in(1)
    • 20.472 in(1)
    • 21.654 in(2)
    • 22.835 in(1)
    • 24.803 in(1)
    • 26.773 in(2)
    • 29.529 in(7)
    • 30.709 in(3)
    • 39.37 in(5)
    • 41.732 in(3)
    • 53.543 in(4)
    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
    Reach
    Reach
    • 0.37 in(1)
    • 0.378 in(1)
    • 0.4 in(2)
    • 0.445 in(2)
    • 0.473 in(2)
    • 0.681 in(1)
    • 0.906 in(1)
    • 1.143 in(1)
    • 1.417 in(1)
    Reach MintoReach Max
    Reach
    Reach
    • 9.4 mm(1)
    • 9.601 mm(1)
    • 10.15 mm(2)
    • 11.3 mm(2)
    • 12.0 mm(2)
    • 17.3 mm(1)
    • 23.0 mm(1)
    • 29.0 mm(1)
    • 36.0 mm(1)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • -8888.0 (33)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • HTS (33)
    • HTS Pilot Drill Shank (18)
    • HTS-C Pilot Drill Shank (4)
    • HTS-R Pilot Drill Shank (6)
    Number of Flutes
    Number of Flutes
    • 2 (61)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 2.0 (76)
    • 4.0 (113)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.079 in(1)
    • 1.201 in(1)
    • 1.457 in(1)
    • 1.496 in(1)
    • 1.752 in(5)
    • 2.008 in(1)
    • 2.146 in(4)
    • 2.265 in(1)
    • 2.717 in(1)
    • 3.346 in(2)
    • 3.74 in(1)
    • 3.938 in(3)
    • 4.134 in(4)
    • 4.529 in(4)
    • 4.724 in(4)
    • 5.118 in(3)
    • 5.71 in(3)
    • 6.299 in(4)
    • 7.283 in(2)
    • 7.875 in(1)
    • 9.055 in(2)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 27.401 mm(1)
    • 30.5 mm(1)
    • 37.0 mm(1)
    • 38.0 mm(1)
    • 44.5 mm(5)
    • 51.0 mm(1)
    • 54.5 mm(4)
    • 57.5 mm(1)
    • 69.0 mm(1)
    • 85.0 mm(2)
    • 95.0 mm(1)
    • 100.0 mm(3)
    • 105.0 mm(4)
    • 115.0 mm(4)
    • 120.0 mm(4)
    • 130.0 mm(3)
    • 145.0 mm(3)
    • 160.0 mm(4)
    • 185.0 mm(2)
    • 200.0 mm(1)
    • 230.0 mm(2)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.008 in(7)
    • 0.012 in(5)
    • 0.016 in(132)
    • 0.024 in(8)
    • 0.031 in(137)
    • 0.039 in(52)
    • 0.047 in(72)
    • 0.063 in(45)
    • 0.079 in(22)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(7)
    • 0.301 mm(5)
    • 0.4 mm(132)
    • 0.601 mm(8)
    • 0.8 mm(137)
    • 1.0 mm(52)
    • 1.201 mm(72)
    • 1.6 mm(45)
    • 2.0 mm(22)
    Corner Radius MintoCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(253)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(253)
    Corner Chamfer MintoCorner Chamfer Max
    Application
    Coating
    Coating
    • TiN (16)
    • Uncoated (4)
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • A30 (8)
    • AS3 (12)
    • CD4 (44)
    • CM4 (35)
    • CS5 (83)
    • K6 (10)
    • KC7020 (15)
    • KC7025 (15)
    • KC7140 (117)
    • KC720 (86)
    • KC7210 (35)
    • KC7215 (114)
    • KC7225 (97)
    • KC7315 (6)
    • KC7325 (2)
    • KC7815 (97)
    • KC7820 (87)
    • KC7845 (10)
    • KC7935 (82)
    • KC810 (82)
    • KC990 (82)
    • KCMS35 (105)
    • KCPK10 (122)
    • KCU25 (143)
    • KCU40 (144)
    • KD1425 (91)
    • KM1 (50)
    • KMF (82)
    • KU40D (82)
    Hand Of Tool
    Hand Of Tool
    • R (61)
    Wiper Insert
    Wiper Insert
    • N (189)
    Drill Type
    Drill Type
    • 81-06 (28)
    • 86-01 (33)
    Front-End
    Insert Shape
    Insert Shape
    • B-PARALLELOGRAM 82 (10)
    • S-SQUARE 90 (233)
    • W-TRIGON 80 (38)
    • X-TRIGON 84 (44)
    Gage Length
    Gage Length
    • 2.394 in(1)
    • 2.972 in(2)
    • 3.346 in(2)
    • 3.426 in(3)
    • 3.543 in(2)
    • 3.551 in(1)
    • 3.622 in(2)
    • 3.697 in(1)
    • 3.701 in(4)
    • 3.781 in(2)
    • 3.898 in(1)
    • 3.938 in(2)
    • 4.173 in(1)
    • 4.331 in(2)
    • 4.409 in(2)
    • 4.484 in(1)
    • 4.921 in(2)
    • 5.315 in(1)
    • 5.5 in(2)
    • 6.299 in(3)
    • 6.453 in(1)
    • 6.644 in(1)
    • 6.891 in(1)
    • 7.144 in(1)
    • 7.875 in(2)
    • 8.051 in(1)
    • 8.268 in(4)
    • 8.346 in(2)
    • 8.661 in(1)
    • 9.222 in(1)
    • 10.551 in(1)
    • 11.144 in(2)
    • 11.222 in(1)
    • 12.144 in(1)
    • 12.205 in(2)
    • 12.283 in(2)
    • 12.362 in(3)
    • 12.441 in(1)
    • 13.051 in(1)
    • 13.13 in(1)
    • 14.173 in(1)
    • 15.551 in(1)
    • 15.722 in(1)
    • 17.645 in(2)
    • 18.052 in(1)
    • 18.11 in(2)
    • 18.189 in(2)
    • 18.268 in(1)
    • 19.222 in(1)
    • 19.645 in(1)
    • 20.079 in(1)
    • 20.236 in(1)
    • 20.315 in(1)
    • 21.13 in(1)
    • 24.094 in(2)
    • 24.174 in(1)
    • 25.722 in(1)
    • 31.13 in(1)
    Gage Length
    Gage Length
    • 210 mm(4)
    • 94 mm(4)
    • 160 mm(3)
    • 314 mm(3)
    • 87 mm(3)
    • 100 mm(2)
    • 110 mm(2)
    • 112 mm(2)
    • 125 mm(2)
    • 200 mm(2)
    • 212 mm(2)
    • 310 mm(2)
    • 312 mm(2)
    • 460 mm(2)
    • 462 mm(2)
    • 612 mm(2)
    • 85 mm(2)
    • 90 mm(2)
    • 92 mm(2)
    • 96 mm(2)
    • 106 mm(1)
    • 135 mm(1)
    • 175 mm(1)
    • 220 mm(1)
    • 268 mm(1)
    • 316 mm(1)
    • 360 mm(1)
    • 395 mm(1)
    • 464 mm(1)
    • 510 mm(1)
    • 514 mm(1)
    • 516 mm(1)
    • 614 mm(1)
    • 99 mm(1)
    • 60.801 mm(1)
    • 75.5 mm(2)
    • 90.2 mm(1)
    • 93.9 mm(1)
    • 113.9 mm(1)
    • 139.701 mm(2)
    • 163.9 mm(1)
    • 168.75 mm(1)
    • 181.451 mm(1)
    • 204.5 mm(1)
    • 234.25 mm(1)
    • 283.05 mm(2)
    • 285.05 mm(1)
    • 308.451 mm(1)
    • 331.5 mm(1)
    • 333.5 mm(1)
    • 399.35 mm(1)
    • 448.151 mm(2)
    • 458.5 mm(1)
    • 488.25 mm(1)
    • 498.951 mm(1)
    • 536.7 mm(1)
    • 653.35 mm(1)
    • 790.7 mm(1)
    Point Angle
    Point Angle
    • 118.0 (54)
    • 130.0 (2)
    Point Angle MintoPoint Angle Max
    Insert Geometry
    Shape
    Shape
    • S-SQUARE 90 (189)
    Insert IC Size
    Insert IC Size
    • 5.551 mm(6)
    • 6.351 mm(27)
    • 7.75 mm(1)
    • 7.926 mm(16)
    • 7.95 mm(24)
    • 9.525 mm(44)
    • 12.701 mm(42)
    • 15.726 mm(20)
    • 15.875 mm(9)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.219 in(6)
    • 0.25 in(27)
    • 0.305 in(1)
    • 0.312 in(16)
    • 0.313 in(24)
    • 0.375 in(44)
    • 0.5 in(42)
    • 0.619 in(20)
    • 0.625 in(9)
    Insert IC Size MintoInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 5.426 mm(6)
    • 6.2 mm(10)
    • 6.351 mm(17)
    • 7.75 mm(1)
    • 7.801 mm(15)
    • 7.926 mm(25)
    • 9.375 mm(20)
    • 9.525 mm(24)
    • 12.55 mm(14)
    • 12.701 mm(37)
    • 15.726 mm(20)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.214 in(6)
    • 0.244 in(10)
    • 0.25 in(17)
    • 0.305 in(1)
    • 0.307 in(15)
    • 0.312 in(25)
    • 0.369 in(20)
    • 0.375 in(24)
    • 0.494 in(14)
    • 0.5 in(37)
    • 0.619 in(20)
    Cutting Edge Length MintoCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • 20 (33)
    • 21 (30)
    • 22 (4)
    • 31 (12)
    • FP (27)
    • HP (34)
    • MD (37)
    • MDT (3)
    Cutting Tool Material
    Cutting Tool Material
    • D P (60)
    • H W (253)
    Tolerance Class
    Tolerance Class
    • G (51)
    • H (12)
    • P (60)
    Back-End
    Connection Type
    Connection Type
    • CYLINDRICAL (28)
    • HTS SHANK (33)
    System Size
    System Size
    • BT50 (4)
    • CV50 (7)
    • DV50 (2)
    • HSK100A (2)
    Back-End Diameter
    Back-End Diameter
    • 5.0 mm(1)
    • 6.0 mm(1)
    • 8.0 mm(7)
    • 10.0 mm(7)
    • 13.0 mm(9)
    • 15.0 mm(3)
    • 16.0 mm(5)
    • 20.0 mm(3)
    • 22.0 mm(6)
    • 25.0 mm(3)
    • 27.0 mm(6)
    • 30.0 mm(3)
    • 32.0 mm(13)
    • 38.1 mm(2)
    • 40.0 mm(10)
    • 50.0 mm(37)
    • 50.801 mm(19)
    • 60.0 mm(3)
    • 63.5 mm(3)
    • 69.851 mm(13)
    • 76.2 mm(3)
    • 80.0 mm(2)
    • 100.0 mm(2)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.197 in(1)
    • 0.237 in(1)
    • 0.315 in(7)
    • 0.394 in(7)
    • 0.512 in(9)
    • 0.591 in(3)
    • 0.63 in(5)
    • 0.787 in(3)
    • 0.866 in(6)
    • 0.984 in(3)
    • 1.063 in(6)
    • 1.181 in(3)
    • 1.26 in(13)
    • 1.5 in(2)
    • 1.575 in(10)
    • 1.969 in(37)
    • 2.0 in(19)
    • 2.362 in(3)
    • 2.5 in(3)
    • 2.75 in(13)
    • 3.0 in(3)
    • 3.15 in(2)
    • 3.938 in(2)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?