TM711

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (19)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(19)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(19)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(19)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(19)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(19)
    • M Stainless Steel (19)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(19)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(19)
    • K Cast Iron (19)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(19)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(19)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(19)
    • N Non-Ferrous Materials (19)
      • N1
        Wrought Aluminum (19)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(19)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(19)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (19)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (19)
      • N6
        Carbon, Graphite Composites, CFRP (19)
    • S High-Temp Alloys (19)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(19)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(19)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(19)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(19)
    Applications
    Applications
    • Thread MillingThread Milling (19)
    • ThreadingThreading (19)
    Cutting Diameter
    Cutting Diameter
    • 0.095 in(1)
    • 0.124 in(1)
    • 0.157 in(1)
    • 0.189 in(1)
    • 0.232 in(1)
    • 0.237 in(2)
    • 0.315 in(2)
    • 0.394 in(4)
    • 0.457 in(1)
    • 0.473 in(2)
    • 0.551 in(3)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 2.401 mm(1)
    • 3.151 mm(1)
    • 4.0 mm(1)
    • 4.801 mm(1)
    • 5.9 mm(1)
    • 6.0 mm(2)
    • 8.0 mm(2)
    • 10.0 mm(4)
    • 11.601 mm(1)
    • 12.0 mm(2)
    • 14.0 mm(3)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Length
    Cutting Length
    • 6.25 mm(1)
    • 8.725 mm(1)
    • 10.775 mm(1)
    • 12.351 mm(1)
    • 16.45 mm(1)
    • 16.825 mm(2)
    • 20.201 mm(1)
    • 20.451 mm(1)
    • 24.475 mm(1)
    • 24.701 mm(1)
    • 25.35 mm(1)
    • 28.0 mm(1)
    • 29.151 mm(1)
    • 32.15 mm(1)
    • 32.926 mm(1)
    • 36.7 mm(1)
    • 41.151 mm(2)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.246 in(1)
    • 0.345 in(1)
    • 0.424 in(1)
    • 0.486 in(1)
    • 0.648 in(1)
    • 0.662 in(2)
    • 0.795 in(1)
    • 0.805 in(1)
    • 0.964 in(1)
    • 0.972 in(1)
    • 0.998 in(1)
    • 1.102 in(1)
    • 1.149 in(1)
    • 1.266 in(1)
    • 1.296 in(1)
    • 1.445 in(1)
    • 1.62 in(2)
    Cutting Length MintoCutting Length Max
    Type of Thread
    Type of Thread
    • M (10)
    • MF (9)
    Thread Size
    Thread Size
    • M10 X 1.0 (1)
    • M10 X 1.5 (1)
    • M12 X 1.0 (1)
    • M12 X 1.5 (1)
    • M12 X 1.75 (1)
    • M14 X 1.5 (1)
    • M14 X 2.0 (1)
    • M16 X 1.5 (1)
    • M16 X 2.0 (1)
    • M18 X 1.5 (1)
    • M20 X 1.5 (1)
    • M20 X 2.5 (1)
    • M3 X 0.5 (1)
    • M4 X 0.7 (1)
    • M5 X 0.8 (1)
    • M6 X 1 (1)
    • M8 X 0.75 (1)
    • M8 X 1.0 (1)
    • M8 X 1.25 (1)
    Reach
    Reach
    • 0.648 in(1)
    • 0.662 in(1)
    • 0.797 in(1)
    • 0.805 in(1)
    • 0.964 in(1)
    • 0.972 in(1)
    • 0.998 in(1)
    • 1.149 in(1)
    • 1.266 in(1)
    • 1.296 in(1)
    • 1.445 in(1)
    • 1.62 in(2)
    Reach MintoReach Max
    Reach
    Reach
    • 16.45 mm(1)
    • 16.825 mm(1)
    • 20.25 mm(1)
    • 20.451 mm(1)
    • 24.475 mm(1)
    • 24.701 mm(1)
    • 25.35 mm(1)
    • 29.151 mm(1)
    • 32.15 mm(1)
    • 32.926 mm(1)
    • 36.7 mm(1)
    • 41.151 mm(2)
    Reach MintoReach Max
    Number of Flutes
    Number of Flutes
    • 3 (9)
    • 4 (10)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.655 in(1)
    • 2.165 in(3)
    • 2.48 in(3)
    • 2.757 in(2)
    • 3.15 in(4)
    • 3.543 in(6)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 42.0 mm(1)
    • 55.0 mm(3)
    • 63.0 mm(3)
    • 70.0 mm(2)
    • 80.0 mm(4)
    • 90.0 mm(6)
    Over All Length [L] MintoOver All Length [L] Max
    Front-End
    Thread Pitch
    Thread Pitch
    • 0.5 mm(1)
    • 0.701 mm(1)
    • 0.75 mm(1)
    • 0.8 mm(1)
    • 1.0 mm(4)
    • 1.25 mm(1)
    • 1.5 mm(6)
    • 1.75 mm(1)
    • 2.0 mm(2)
    • 2.5 mm(1)
    Thread Pitch MintoThread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.02 in(1)
    • 0.028 in(1)
    • 0.03 in(1)
    • 0.031 in(1)
    • 0.039 in(4)
    • 0.049 in(1)
    • 0.06 in(6)
    • 0.069 in(1)
    • 0.079 in(2)
    • 0.098 in(1)
    Thread Pitch MintoThread Pitch Max
    Back-End
    Back-End Diameter
    Back-End Diameter
    • 4.0 mm(1)
    • 6.0 mm(6)
    • 8.0 mm(2)
    • 10.0 mm(4)
    • 12.0 mm(3)
    • 14.0 mm(3)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.157 in(1)
    • 0.237 in(6)
    • 0.315 in(2)
    • 0.394 in(4)
    • 0.473 in(3)
    • 0.551 in(3)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?