V-Bottom
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (13)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(13)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(13)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(13)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(13)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(13)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(13)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(13)
- M Stainless Steel (13)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(13)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(13)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(13)
- K Cast Iron (13)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(13)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(13)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(13)
- N Non-Ferrous Materials (13)
- N1Wrought Aluminum (13)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(13)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (13)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (13)
- N6Carbon, Graphite Composites, CFRP (13)
- S High-Temp Alloys (13)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(13)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(13)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(13)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(13)
- H Hardened Materials (13)
- H1Hardened Materials 44-48 HRC(13)
- H2Hardened Materials 48-55 HRC(13)
- C CFRP Materials (13)
- C1CFRP, CFRP / CFRP (13)
Applications
Applications
Facing (17)
Multiple Direction Cutting (17)
Profiling (14)
Turning (17)
Cutting Condition
Cutting Condition
- Lightly Interrupted Cut (13)
- Smooth Cut (13)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (6)
- 90.0 (11)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (13)
to
Over All Length [L]
Over All Length [L]
- 5.955 in(3)
- 6.0 in(10)
- 6.742 in(4)
to
Over All Length [L]
Over All Length [L]
- 151.25 mm(3)
- 152.4 mm(10)
- 171.25 mm(4)
to
Corner Radius
Corner Radius
- 0.125 in(4)
- 0.188 in(4)
- 0.25 in(5)
to
Corner Radius
Corner Radius
- 3.176 mm(4)
- 4.775 mm(4)
- 6.351 mm(5)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (13)
- KC5010 (13)
- KC5510 (4)
- KC732 (5)
- KCS10 (13)
- KCS10B (13)
- KCU10B (13)
- KY1525 (9)
- KY1540 (9)
- KY2000 (4)
- KY2100 (9)
- KY3000 (5)
- KY3400 (5)
- KY4300 (13)
- KYS25 (9)
- KYS30 (9)
Hand Of Tool
Hand Of Tool
- L (3)
- N (8)
- R (6)
Wiper Insert
Wiper Insert
- N (13)
F Dimension
F Dimension
- 12.5 mm(2)
- 12.601 mm(2)
- 15.775 mm(2)
- 16.0 mm(2)
- 25.401 mm(1)
- 31.75 mm(2)
- 32.0 mm(1)
- 38.1 mm(3)
- 40.0 mm(2)
to
F Dimension
F Dimension
- 0.492 in(2)
- 0.496 in(2)
- 0.621 in(2)
- 0.63 in(2)
- 1.0 in(1)
- 1.25 in(2)
- 1.26 in(1)
- 1.5 in(3)
- 1.575 in(2)
to
Cutting Direction
Cutting Direction
- E (11)
- S (6)
Front-End
Maximum Cutting Depth
Maximum Cutting Depth
- 0.25 in(3)
- 0.276 in(1)
- 0.315 in(2)
- 0.748 in(1)
- 0.75 in(2)
- 1.131 in(1)
- 1.143 in(1)
- 1.496 in(2)
- 1.5 in(4)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 6.351 mm(3)
- 7.0 mm(1)
- 8.0 mm(2)
- 19.0 mm(1)
- 19.05 mm(2)
- 28.701 mm(1)
- 29.0 mm(1)
- 38.0 mm(2)
- 38.1 mm(4)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- C A (13)
- C N (9)
- H W (13)
Back-End
Shank Height
Shank Height
- 0.984 in(3)
- 1.0 in(5)
- 1.25 in(5)
- 1.26 in(4)
to
Shank Height
Shank Height
- 25.0 mm(3)
- 25.401 mm(5)
- 31.75 mm(5)
- 32.0 mm(4)
to
Shank Width
Shank Width
- 0.984 in(3)
- 1.0 in(5)
- 1.25 in(5)
- 1.26 in(4)
to
Shank Width
Shank Width
- 25.0 mm(3)
- 25.401 mm(5)
- 31.75 mm(5)
- 32.0 mm(4)
to
No filters matching ""
