Name: Rodeka™ IC 12 刀片 • RNGJ12..-GD
SKU: 4146587
Rating: 0 (0 reviews)

High Performance Combination Tools

刀片选择指南

材料分组	轻切削		中等切削		重切削
–	(锋利的槽型)		–		(强壮的槽型)
–	耐磨性				韧性
–	槽型	材质	槽型	材质	槽型	材质
P1–P2	.E..LD	KCPK30	.S..GD	KCPM40	.S..HD	KCPM40
P3–P4	.E..LD	KCPK30	.S..GD	KCPK30	.S..HD	KCPM40
P5–P6	.E..LD	KC725M	.S..GD	KC725M	.S..HD	KC725M
M1–M2	.E..LD	KC522M	.S..GDJ	KCSM40	.S..HD	KC725M
M3	.S..GD	KCPM40	.S..GDJ	KCSM40	.S..HD	KCPM40
K1–K2	.S..HD	KC520M	.S..HD	KCK15	.S..HD	KCK15
K3	.S..HD	KC520M	.S..HD	KCK15	.S..HD	KCK15
N1–N2	.F..LDJ	KC422M	.F..LDJ	KC422M	.S..GD	KC510M
N3	–	–	–	–	–	–
S1–S2	.E..LD	KC725M	.S..GD	KC725M	.S..HD	KC725M
S3	.S..GD	KCPM40	.S..GDJ	KCSM40	.S..HD	KCPM40
S4	.S..GD	KC522M	.S..GDJ	KCSM40	.S..HD	KC725M
H1	.S..GD	KC510M	.S..GD	KC510M	–	–

阅读全文View Less

Feeds

轴向切削深度(ap)为6,00 时

轻切削

中等切削

重切削

轴向切削深度(ap)为2,00 时

刀片槽型	不同切宽(ae)百分比情况下，所建议的每齿进给量设定值(fz)															刀片槽型
	5%			10%			20%			30%			40%–100%
.F..LDJ	0,17	0,53	1,03	0,12	0,38	0,73	0,09	0,29	0,54	0,08	0,25	0,47	0,07	0,23	0,43	.F..LDJ
.E..LDJ	0,17	0,60	1,09	0,12	0,43	0,77	0,09	0,32	0,58	0,08	0,28	0,50	0,07	0,25	0,46	.E..LDJ
.E..LD	0,17	0,60	1,09	0,12	0,43	0,77	0,09	0,32	0,58	0,08	0,28	0,50	0,07	0,25	0,46	.E..LD
.S..GDJ	0,32	0,80	1,22	0,23	0,57	0,86	0,17	0,43	0,64	0,15	0,37	0,56	0,14	0,34	0,51	.S..GDJ
.S..GD	0,32	0,80	1,22	0,23	0,57	0,86	0,17	0,43	0,64	0,15	0,37	0,56	0,14	0,34	0,51	.S..GD
.S..HD	0,32	0,80	1,22	0,23	0,57	0,86	0,17	0,43	0,64	0,15	0,37	0,56	0,14	0,34	0,51	.S..HD

轴向切削深度(ap)为1,30 时

刀片槽型	不同切宽(ae)百分比情况下，所建议的每齿进给量设定值(fz)															刀片槽型
	5%			10%			20%			30%			40–100%
.F..LDJ	0,12	0,40	0,76	0,09	0,29	0,54	0,07	0,21	0,40	0,06	0,19	0,35	0,05	0,17	0,32	.F..LDJ
.E..LDJ	0,12	0,44	0,80	0,09	0,32	0,58	0,07	0,24	0,43	0,06	0,21	0,37	0,05	0,19	0,34	.E..LDJ
.E..LD	0,12	0,44	0,80	0,09	0,32	0,58	0,07	0,24	0,43	0,06	0,21	0,37	0,05	0,19	0,34	.E..LD
.S..GDJ	0,23	0,59	0,90	0,17	0,43	0,64	0,13	0,32	0,48	0,11	0,28	0,42	0,10	0,25	0,38	.S..GDJ
.S..GD	0,23	0,59	0,90	0,17	0,43	0,64	0,13	0,32	0,48	0,11	0,28	0,42	0,10	0,25	0,38	.S..GD
.S..HD	0,23	0,59	0,90	0,17	0,43	0,64	0,13	0,32	0,48	0,11	0,28	0,42	0,10	0,25	0,38	.S..HD

轴向切削深度(ap)为0,80 时

刀片槽型	不同切宽(ae)百分比情况下，所建议的每齿进给量设定值(fz)															刀片槽型
	5%			10%			20%			30%			40%–100%
.F..LDJ	0,25	0,81	1,56	0,18	0,58	1,10	0,13	0,43	0,81	0,12	0,37	0,71	0,11	0,34	0,65	.F..LDJ
.E..LDJ	0,25	0,90	1,65	0,18	0,64	1,17	0,13	0,48	0,86	0,12	0,42	0,75	0,11	0,38	0,69	.E..LDJ
.E..LD	0,25	0,90	1,65	0,18	0,64	1,17	0,13	0,48	0,86	0,12	0,42	0,75	0,11	0,38	0,69	.E..LD
.S..GDJ	0,47	1,21	1,86	0,34	0,86	1,30	0,26	0,64	0,96	0,22	0,56	0,84	0,20	0,51	0,76	.S..GDJ
.S..GD	0,47	1,21	1,86	0,34	0,86	1,30	0,26	0,64	0,96	0,22	0,56	0,84	0,20	0,51	0,76	.S..GD
.S..HD	0,47	1,21	1,86	0,34	0,86	1,30	0,26	0,64	0,96	0,22	0,56	0,84	0,20	0,51	0,76	.S..HD

刀片槽型	不同切宽(ae)百分比情况下，所建议的每齿进给量设定值(fz)															刀片槽型
	5%			10%			20%			30%			40%–100%
.F..LDJ	0,20	0,64	1,24	0,14	0,46	0,88	0,11	0,34	0,65	0,09	0,30	0,57	0,09	0,28	0,52	.F..LDJ
.E..LDJ	0,20	0,72	1,31	0,14	0,51	0,93	0,11	0,38	0,69	0,09	0,33	0,60	0,09	0,31	0,55	.E..LDJ
.E..LD	0,20	0,72	1,31	0,14	0,51	0,93	0,11	0,38	0,69	0,09	0,33	0,60	0,09	0,31	0,55	.E..LD
.S..GDJ	0,38	0,97	1,47	0,27	0,69	1,04	0,20	0,51	0,77	0,18	0,45	0,67	0,16	0,41	0,61	.S..GDJ
.S..GD	0,38	0,97	1,47	0,27	0,69	1,04	0,20	0,51	0,77	0,18	0,45	0,67	0,16	0,41	0,61	.S..GD
.S..HD	0,38	0,97	1,47	0,27	0,69	1,04	0,20	0,51	0,77	0,18	0,45	0,67	0,16	0,41	0,61	.S..HD

At .240 Axial Depth of Cut (ap)

刀片槽型	不同切宽(ae)百分比情况下，所建议的每齿进给量设定值(fz)															刀片槽型
	5%			10%			20%			30%			40–100%
.F..LDJ	.005	.016	.030	.004	.011	.021	.003	.008	.016	.002	.007	.014	.002	.007	.013	.F..LDJ
.E..LDJ	.005	.017	.032	.004	.013	.023	.003	.009	.017	.002	.008	.015	.002	.008	.014	.E..LDJ
.E..LD	.005	.017	.032	.004	.013	.023	.003	.009	.017	.002	.008	.015	.002	.008	.014	.E..LD
.S..GDJ	.009	.023	.035	.007	.017	.025	.005	.013	.019	.004	.011	.016	.004	.010	.015	.S..GDJ
.S..GD	.009	.023	.035	.007	.017	.025	.005	.013	.019	.004	.011	.016	.004	.010	.015	.S..GD
.S..HD	.009	.023	.035	.007	.017	.025	.005	.013	.019	.004	.011	.016	.004	.010	.015	.S..HD

At .080 Axial Depth of Cut (ap)

刀片槽型	不同切宽(ae)百分比情况下，所建议的每齿进给量设定值(fz)															刀片槽型
	5%			10%			20%			30%			40–100%
.F..LDJ	.010	.033	.063	.007	.023	.044	.005	.017	.033	.005	.015	.029	.004	.014	.026	.F..LDJ
.E..LDJ	.010	.036	.067	.007	.026	.047	.005	.019	.035	.005	.017	.030	.004	.015	.028	.E..LDJ
.E..LD	.010	.036	.067	.007	.026	.047	.005	.019	.035	.005	.017	.030	.004	.015	.028	.E..LD
.S..GDJ	.019	.049	.075	.014	.035	.052	.010	.026	.039	.009	.022	.034	.008	.021	.031	.S..GDJ
.S..GD	.019	.049	.075	.014	.035	.052	.010	.026	.039	.009	.022	.034	.008	.021	.031	.S..GD
.S..HD	.019	.049	.075	.014	.035	.052	.010	.026	.039	.009	.022	.034	.008	.021	.031	.S..HD

At .050 Axial Depth of Cut (ap)

刀片槽型	不同切宽(ae)百分比情况下，所建议的每齿进给量设定值(fz)															刀片槽型
	5%			10%			20%			30%			40–100%
.F..LDJ	.007	.021	.040	.005	.015	.029	.004	.011	.021	.003	.010	.019	.003	.009	.017	.F..LDJ
.E..LDJ	.007	.023	.043	.005	.017	.030	.004	.013	.023	.003	.011	.020	.003	.010	.018	.E..LDJ
.E..LD	.007	.023	.043	.005	.017	.030	.004	.013	.023	.003	.011	.020	.003	.010	.018	.E..LD
.S..GDJ	.012	.031	.048	.009	.022	.034	.007	.017	.025	.006	.015	.022	.005	.013	.020	.S..GDJ
.S..GD	.012	.031	.048	.009	.022	.034	.007	.017	.025	.006	.015	.022	.005	.013	.020	.S..GD
.S..HD	.012	.031	.048	.009	.022	.034	.007	.017	.025	.006	.015	.022	.005	.013	.020	.S..HD

At .030 Axial Depth of Cut (ap)

轻切削

中等切削

重切削

刀片槽型	不同切宽(ae)百分比情况下，所建议的每齿进给量设定值(fz)															刀片槽型
	5%			10%			20%			30%			40–100%
.F..LDJ	.008	.026	.049	.006	.018	.035	.004	.014	.026	.004	.012	.023	.003	.011	.021	.F..LDJ
.E..LDJ	.008	.029	.052	.006	.020	.037	.004	.015	.028	.004	.013	.024	.003	.012	.022	.E..LDJ
.E..LD	.008	.029	.052	.006	.020	.037	.004	.015	.028	.004	.013	.024	.003	.012	.022	.E..LD
.S..GDJ	.015	.038	.059	.011	.027	.041	.008	.020	.031	.007	.018	.027	.007	.016	.024	.S..GDJ
.S..GD	.015	.038	.059	.011	.027	.041	.008	.020	.031	.007	.018	.027	.007	.016	.024	.S..GD
.S..HD	.015	.038	.059	.011	.027	.041	.008	.020	.031	.007	.018	.027	.007	.016	.024	.S..HD

阅读全文View Less

Speeds

Recommended Starting Speeds [SFM]

材料分组		KC422M			KC510M			KCK15			KC520M			KCPM20			KC522M			KC725M			KCPK30
P	1	–	–	–	–	–	–	–	–	–	–	–	–	2170	1910	1760	1300	1130	1060	1030	900	840	1780	1560	1450
	2	–	–	–	–	–	–	–	–	–	–	–	–	1340	1210	1090	1080	950	790	860	760	640	1100	1000	900
	3	–	–	–	–	–	–	–	–	–	–	–	–	1210	1090	1000	1000	840	700	790	670	550	1000	900	820
	4	–	–	–	960	780	660	–	–	–	–	–	–	910	840	760	890	730	590	710	590	470	740	690	620
	5	–	–	–	–	–	–	–	–	–	–	–	–	1090	980	900	730	660	590	590	530	470	1020	910	830
	6	–	–	–	–	–	–	–	–	–	–	–	–	760	660	570	650	490	400	520	400	310	620	540	0
M	1	–	–	–	–	–	–	–	–	–	–	–	–	880	790	680	800	710	650	670	590	540	820	720	620
	2	–	–	–	–	–	–	–	–	–	–	–	–	800	700	620	730	620	520	610	520	430	730	640	550
	3	–	–	–	–	–	–	–	–	–	–	–	–	640	570	490	550	480	370	460	400	310	570	520	460
K	1	–	–	–	1150	1040	940	1660	1510	1340	1060	960	850	1420	1280	1150	900	820	720	–	–	–	1160	1050	940
	2	–	–	–	910	820	760	1310	1170	1090	830	740	700	1130	1010	920	710	640	590	–	–	–	920	830	760
	3	–	–	–	770	680	620	1100	980	900	700	620	560	950	840	780	590	530	480	–	–	–	770	690	640
N	1	4220	3720	3440	2520	2240	2060	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	3720	3440	3000	2280	2100	1920	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	160	140	110	140	120	100	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	160	140	110	140	120	100	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	200	160	110	180	140	100	–	–	–
	4	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	280	200	140	240	180	120	–	–	–
H	1	–	–	–	630	510	360	–	–	–	–	–	–	550	460	370	470	360	280	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

物料号	4146587
公制样本编号	RNGJ1204M0SGD
英制样本编号	RNGJ1204M0SGD
材质	KC522M
[SSC] 刀片 IC 尺寸	12 mm
[SSC] 刀片 IC 尺寸	.4724 in
[S] 刀片厚度	4.75 mm
[S] 刀片厚度	.187 in
平均切屑厚度 [HM]	0.087 mm
平均切屑厚度 [HM]	.0034 in
刀片转位数	12

欢迎

请确认您的首选项

更新首选项

产品建议

Product Family suggestions

编辑解决方案

添加解决方案

产品类似于:

Rodeka™ IC 12 刀片 • RNGJ12..-GD

刀片

物料号4146587

公制样本编号RNGJ1204M0SGD英制样本编号RNGJ1204M0SGD

工件材料

Features and benefits

High Performance Combination Tools

刀片选择指南

Feeds

轴向切削深度(ap)为6,00 时

轴向切削深度(ap)为2,00 时

轴向切削深度(ap)为1,30 时

轴向切削深度(ap)为0,80 时

At .240 Axial Depth of Cut (ap)

At .080 Axial Depth of Cut (ap)

At .050 Axial Depth of Cut (ap)

At .030 Axial Depth of Cut (ap)

Speeds

Recommended Starting Speeds [SFM]

推荐初始速度 [米/分钟]

产品建议

Product Family suggestions

Notifications

产品类似于:

Rodeka™ IC 12 刀片 • RNGJ12..-GD

刀片

物料号4146587

公制样本编号RNGJ1204M0SGD英制样本编号RNGJ1204M0SGD

Sending to {{cadTool}} in progress...

工件材料

Features and benefits

High Performance Combination Tools

刀片选择指南

Feeds

轴向切削深度(ap)为6,00 时

轴向切削深度(ap)为2,00 时

轴向切削深度(ap)为1,30 时

轴向切削深度(ap)为0,80 时

At .240 Axial Depth of Cut (ap)

At .080 Axial Depth of Cut (ap)

At .050 Axial Depth of Cut (ap)

At .030 Axial Depth of Cut (ap)

Speeds

Recommended Starting Speeds [SFM]

推荐初始速度 [米/分钟]

The following files are available