KDMT Flat Bottom and Back Draft Finishing End Mill • Necked End Mills • Cylindrical Shank • Carbide • Inch
Flat-Bottom and Back-Draft Finishing End Mills
物料号2878452
公制样本编号KDMT0500R472A050HNC英制样本编号KDMT0500R472A050HNC
- P 钢
- M 不锈钢
- K 铸铁
- N 非铁材质
- S 高温合金
- H 淬火材料
坡铣: 毛坯
槽铣: 球形刀尖
侧铣/方肩铣削: 球形刀尖
3D仿形加工
刀柄 — 圆柱 平面
铣削 — 贯通式冷却
刀座
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
物料号 | 2878452 |
公制样本编号 | KDMT0500R472A050HNC |
英制样本编号 | KDMT0500R472A050HNC |
[D1] 有效的切削直径 | 12.7 mm |
[D1] 有效的切削直径 | .5 in |
[D]适配接头/刀柄/镗孔直径 | 12.7 mm |
[D]适配接头/刀柄/镗孔直径 | .5 in |
[D3] 颈部直径 | 10.67 mm |
[D3] 颈部直径 | .42 in |
[L] 总长 | 122 mm |
[L] 总长 | 4.803 in |
[L2] 刀头长度 | 37 mm |
[L2] 刀头长度 | 1.456 in |
[AP1MAX] 第一个最大切深 | 3 mm |
[AP1MAX] 第一个最大切深 | .118 in |
刀片数量 | 1 |
[Z] 排屑槽数量 | 2 |
最大坡铣角度 | 3 |
最大 RPM | 40000 |
Gage 刀片 | KDMT0500. |
重量(磅) | 0.39 |
工件材料
- 钢
- 不锈钢
- 铸铁
- 非铁材质
- 高温合金
- 淬火材料
Uses and application
坡铣: 毛坯
槽铣: 球形刀尖
侧铣/方肩铣削: 球形刀尖
3D仿形加工
刀柄 — 圆柱 平面
铣削 — 贯通式冷却
刀座
Features and benefits
- Cutting diameter ranges from .500–1.000".
- High precision and runout accuracy.
- Can be used with the heat shrink technology, h6 shank tolerance.
- Suitable for roughing and finishing operations.
- Works with toroidal and high-feed inserts.
通过创建解决方案计算速度和进给
创建解决方案后,只需选择进给和速度图标,我们的系统将提供建议。您可以通过添加您的机床和参数来定制信息,或者使用滑块进行调整。
High Performance Combination Tools
Material Group | Light | General | Heavy | |||
– | (Light geometry) | – | (Strong geometry) | |||
– | wear | toughness | ||||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | .E..GC | KC515M | .E..GC | KC515M | .E..GN | KC515M |
P3–P4 | .E..GN | KC515M | .E..GN | KC515M | .E..GN | KC515M |
P5–P6 | .E..GN | KC515M | .E..GN | KC515M | .E..GN | KC515M |
M1–M2 | – | – | .E..GN | KC515M | – | – |
M3 | – | – | .E..GN | KC515M | – | – |
K1–K2 | .E..GN | KC515M | .E..GN | KC515M | .E..GN | KC515M |
K3 | .E..GN | KC515M | .E..GN | KC515M | .E..GN | KC515M |
N1–N2 | – | – | – | – | – | – |
N3 | – | – | – | – | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | – | – | – | – | – | – |
H1 | – | – | .E..GN | KC515M | – | – |
Feeds
Recommended Starting Feeds [IPT]
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..GC | .007 | .010 | .014 | .005 | .008 | .010 | .004 | .007 | .009 | .004 | .006 | .008 | .004 | .006 | .008 | .E..GC |
.E..GN | .007 | .010 | .014 | .005 | .008 | .010 | .004 | .007 | .009 | .004 | .006 | .008 | .004 | .006 | .008 | .E..GN |
Light | General | Heavy |
Recommended Starting Feeds [IPT]
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.S..HF | .059 | .092 | .131 | .042 | .064 | .086 | .036 | .054 | .073 | .034 | .050 | .067 | .033 | .049 | .066 | .S..HF |
Light | General | Heavy |
Speeds
Recommended Starting Speeds [SFM]
Material Group | KC515M | |||
P | 1 | 1080 | 960 | 840 |
2 | 1020 | 900 | 780 | |
3 | 900 | 780 | 660 | |
4 | 780 | 660 | 540 | |
5 | 660 | 540 | 420 | |
6 | 540 | 420 | 360 | |
M | 1 | 1080 | 900 | 780 |
2 | 900 | 720 | 540 | |
3 | 720 | 600 | 480 | |
K | 1 | 1440 | 1080 | 720 |
2 | 1080 | 840 | 600 | |
3 | 480 | 360 | 240 | |
N | 1–2 | – | – | – |
3 | – | – | – | |
S | 1 | – | – | – |
2 | – | – | – | |
3 | – | – | – | |
4 | – | – | – | |
H | 1 | 550 | 400 | 310 |
I have read and accepted the Terms & Conditions of use