Mill 16™ • Shell Mill • Wedge Clamping • Fine Pitch • Metric
Face Mill • Cast Iron Machining
物料号6001978
公制样本编号MILL16D200Z28ON08W英制样本编号MILL16D200Z28ON08W
- P 钢
- M 不锈钢
- K 铸铁
- S 高温合金
端面铣削
铣削 — 侧铣和端面铣
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
物料号 | 6001978 |
公制样本编号 | MILL16D200Z28ON08W |
英制样本编号 | MILL16D200Z28ON08W |
[D1] 有效的切削直径 | 200 mm |
[D1] 有效的切削直径 | 7.874 in |
[D1MAX] 最大切削直径 | 212.55 mm |
[D1MAX] 最大切削直径 | 8.368 in |
[D]适配接头/刀柄/镗孔直径 | 60 mm |
[D]适配接头/刀柄/镗孔直径 | 2.363 in |
[D6] 保护区孔直径 | 140 mm |
[D6] 保护区孔直径 | 5.512 in |
[L] 总长 | 63.01 mm |
[L] 总长 | 2.481 in |
[AP1MAX] 第一个最大切深 | 5.5 mm |
[AP1MAX] 第一个最大切深 | .215 in |
刀片数量 | 28 |
重量(千克) | 6.99 |
最大 RPM | 4600 |
工件材料
- 钢
- 不锈钢
- 铸铁
- 高温合金
Uses and application
端面铣削
铣削 — 侧铣和端面铣
Features and benefits
- Milling cutters for cast iron and compacted graphite iron (CGI) machining.
- Ideal for roughing of engine heads and blocks, housings, gear boxes, etc.
- Insert pocket numbering system.
- High feed rate capability to boost productivity and reduce cycle time.
通过创建解决方案计算速度和进给
创建解决方案后,只需选择进给和速度图标,我们的系统将提供建议。您可以通过添加您的机床和参数来定制信息,或者使用滑块进行调整。
High Performance Combination Tools
刀片选择指南
Material Group | Light | General | Heavy | |||
– | (Light geometry) | (Strong geometry) | ||||
– | wear | toughness | ||||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | – | – | – | – | – | – |
P3–P4 | – | – | – | – | – | – |
P5–P6 | – | – | – | – | – | – |
M1–M2 | – | – | – | – | – | – |
M3 | – | – | – | – | – | – |
K1–K2 | .E..LE | KC514M | .S..GP | KC514M | .S..HB | KC514M |
K3 | .E..LE | KCK20 | .S..GP | KCK20 | .S..HB | KCK15 |
N1–N2 | – | – | – | – | – | – |
N3 | – | – | – | – | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | – | – | – | – | – | – |
H1 | – | – | – | – | – | – |
Feeds
推荐初始进给量[毫米]
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40 | ||||||||||||
.E..LE | 0,23 | 0,66 | 1,16 | 0,17 | 0,47 | 0,83 | 0,13 | 0,35 | 0,62 | 0,11 | 0,31 | 0,54 | 0,10 | 0,28 | 0,49 | .E..LE |
.S..GP | 0,33 | 0,74 | 1,26 | 0,24 | 0,53 | 0,90 | 0,18 | 0,40 | 0,67 | 0,16 | 0,35 | 0,59 | 0,14 | 0,32 | 0,54 | .S..GP |
.S..HB | 0,33 | 0,84 | 1,35 | 0,24 | 0,60 | 0,97 | 0,18 | 0,45 | 0,72 | 0,16 | 0,39 | 0,63 | 0,14 | 0,36 | 0,57 | .S..HB |
Light | General | Heavy |
Recommended Starting Feeds [IPT]
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40 | ||||||||||||
.E..LE | .009 | .026 | .046 | .007 | .019 | .033 | .005 | .014 | .025 | .004 | .012 | .022 | .004 | .011 | .020 | .E..LE |
.S..GP | .013 | .029 | .049 | .009 | .021 | .035 | .007 | .016 | .026 | .006 | .014 | .023 | .006 | .012 | .021 | .S..GP |
.S..HB | .013 | .033 | .053 | .009 | .024 | .038 | .007 | .018 | .028 | .006 | .015 | .025 | .006 | .014 | .023 | .S..HB |
Light | General | Heavy |
Speeds
推荐初始切削速度[米/分钟]
Material Group | KC514M | KCK15 | KCK20 | KCPK30 | |||||||||
P | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | – | – | – | – | – | – | |
5 | – | – | – | – | – | – | – | – | – | – | – | – | |
6 | – | – | – | – | – | – | – | – | – | – | – | – | |
M | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
K | 1 | 290 | 190 | 135 | 330 | 220 | 150 | 330 | 220 | 150 | 295 | 265 | 240 |
2 | 225 | 160 | 115 | 250 | 180 | 125 | 250 | 180 | 125 | 235 | 210 | 190 | |
3 | 190 | 135 | 110 | 220 | 150 | 120 | 220 | 150 | 120 | 195 | 175 | 160 | |
S | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | – | – | – | – | – | – |
Recommended Starting Speeds [SFM]
Material Group | KC514M | KCK15 | KCK20 | KCPK30 | |||||||||
P | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | – | – | – | – | – | – | |
5 | – | – | – | – | – | – | – | – | – | – | – | – | |
6 | – | – | – | – | – | – | – | – | – | – | – | – | |
M | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
K | 1 | 955 | 625 | 495 | 1085 | 725 | 495 | 1085 | 725 | 495 | 970 | 870 | 785 |
2 | 745 | 525 | 410 | 820 | 595 | 410 | 820 | 595 | 410 | 770 | 690 | 625 | |
3 | 625 | 445 | 395 | 725 | 495 | 395 | 725 | 495 | 395 | 640 | 575 | 525 | |
S | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use