Name: Round Inserts for KDM • RDHX-GN
SKU: 1776013
Rating: 0 (0 reviews)

High Performance Combination Tools

Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance				toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	.F..LP	KC725M	.S..HP	KC725M	.S..HP	KC725M
P3–P4	.S..HP	KC522M	.S..HP	KCPK30	.S..HP	KCPK30
P5–P6	.S..HP	KC522M	.S..HP	KCPM20	.S..HN	KCPM20
M1–M2	.F..LP	KC725M	.S..HP	KC725M	–	–
M3	.S..HP	KC522M	.S..HP	KC725M	–	–
K1–K2	.S..GN	KC510M	.S..HP	KCPK30	.S..HP	KCPK30
K3	.S..GN	KC510M	.S..HP	KCPK30	.S..HP	KCPK30
N1–N2	.F..LP	K110M	.F..LP	K110M	.F..LP	KC510M
N3	.F..LP	K110M	.F..LP	KC510M	.F..LP	KC510M
S1–S2	–	–	.S..HP	KC725M	–	–
S3	–	–	.S..HP	KC725M	–	–
S4	–	–	.S..HP	KC725M	–	–
H1	.S..HN	KC510M	.S..HN	KC510M	.S..HN	KCPM20

阅读全文View Less

Feeds

5,00 轴向切深

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.F..LP	0,08	0,17	0,33	0,06	0,13	0,25	0,06	0,11	0,22	0,05	0,10	0,20	0,05	0,10	0,20	.F..LP
.S..GN	0,17	0,40	0,68	0,13	0,30	0,51	0,11	0,26	0,44	0,10	0,24	0,41	0,10	0,24	0,41	.S..GN
.T..GN	0,17	0,43	0,68	0,13	0,32	0,51	0,11	0,28	0,44	0,10	0,26	0,41	0,10	0,25	0,41	.T..GN
.S..HP	0,17	0,43	0,68	0,13	0,32	0,51	0,11	0,28	0,44	0,10	0,26	0,41	0,10	0,25	0,41	.S..HP
.S..HN	0,17	0,43	0,68	0,13	0,32	0,51	0,11	0,28	0,44	0,10	0,26	0,41	0,10	0,25	0,41	.S..HN

2,00 轴向切深

Light Machining

General Purpose

Heavy Machining

1,00 轴向切深

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.F..LP	0,11	0,21	0,42	0,08	0,16	0,31	0,07	0,14	0,27	0,06	0,13	0,26	0,06	0,13	0,25	.F..LP
.S..GN	0,21	0,50	0,85	0,16	0,38	0,64	0,14	0,33	0,55	0,13	0,31	0,52	0,13	0,30	0,51	.S..GN
.T..GN	0,21	0,53	0,85	0,16	0,40	0,64	0,14	0,35	0,55	0,13	0,32	0,52	0,13	0,32	0,51	.T..GN
.S..HP	0,21	0,53	0,85	0,16	0,40	0,64	0,14	0,35	0,55	0,13	0,32	0,52	0,13	0,32	0,51	.S..HP
.S..HN	0,21	0,53	0,85	0,16	0,40	0,64	0,14	0,35	0,55	0,13	0,32	0,52	0,13	0,32	0,51	.S..HN

0,50 轴向切深

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.F..LP	0,19	0,38	0,77	0,15	0,29	0,58	0,13	0,25	0,50	0,12	0,23	0,47	0,12	0,23	0,46	.F..LP
.S..GN	0,39	0,93	1,58	0,29	0,69	1,17	0,25	0,60	1,02	0,24	0,56	0,95	0,23	0,55	0,93	.S..GN
.T..GN	0,39	0,98	1,58	0,29	0,73	1,17	0,25	0,64	1,02	0,24	0,59	0,95	0,23	0,58	0,93	.T..GN
.S..HP	0,39	0,98	1,58	0,29	0,73	1,17	0,25	0,64	1,02	0,24	0,59	0,95	0,23	0,58	0,93	.S..HP
.S..HN	0,39	0,98	1,58	0,29	0,73	1,17	0,25	0,64	1,02	0,24	0,59	0,95	0,23	0,58	0,93	.S..HN

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.F..LP	0,14	0,28	0,56	0,11	0,21	0,42	0,09	0,18	0,36	0,09	0,17	0,34	0,08	0,17	0,33	.F..LP
.S..GN	0,28	0,67	1,14	0,21	0,50	0,85	0,18	0,44	0,74	0,17	0,41	0,69	0,17	0,40	0,68	.S..GN
.T..GN	0,28	0,71	1,14	0,21	0,53	0,85	0,18	0,46	0,74	0,17	0,43	0,69	0,17	0,42	0,68	.T..GN
.S..HP	0,28	0,71	1,14	0,21	0,53	0,85	0,18	0,46	0,74	0,17	0,43	0,69	0,17	0,42	0,68	.S..HP
.S..HN	0,28	0,71	1,14	0,21	0,53	0,85	0,18	0,46	0,74	0,17	0,43	0,69	0,17	0,42	0,68	.S..HN

At .197 Axial Depth of Cut (ap)

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.F..LP	.007	.014	.028	.005	.010	.021	.005	.009	.018	.004	.008	.017	.004	.008	.017	.F..LP
.S..GN	.014	.033	.059	.010	.024	.042	.009	.021	.036	.008	.020	.034	.008	.019	.033	.S..GN
.T..GN	.014	.036	.059	.010	.026	.042	.009	.023	.036	.008	.021	.034	.008	.021	.033	.T..GN
.S..HP	.014	.036	.059	.010	.026	.042	.009	.023	.036	.008	.021	.034	.008	.021	.033	.S..HP
.S..HN	.014	.036	.059	.010	.026	.042	.009	.023	.036	.008	.021	.034	.008	.021	.033	.S..HN

At .098 Axial Depth of Cut (ap)

Light Machining

General Purpose

Heavy Machining

At .049 Axial Depth of Cut (ap)

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.F..LP	.003	.007	.014	.003	.005	.010	.002	.004	.009	.002	.004	.008	.002	.004	.008	.F..LP
.S..GN	.007	.016	.028	.005	.012	.020	.004	.010	.018	.004	.009	.016	.004	.009	.016	.S..GN
.T..GN	.007	.017	.028	.005	.013	.020	.004	.011	.018	.004	.010	.016	.004	.010	.016	.T..GN
.S..HP	.007	.017	.028	.005	.013	.020	.004	.011	.018	.004	.010	.016	.004	.010	.016	.S..HP
.S..HN	.007	.017	.028	.005	.013	.020	.004	.011	.018	.004	.010	.016	.004	.010	.016	.S..HN

At .025 Axial Depth of Cut (ap)

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.F..LP	.005	.010	.021	.004	.008	.015	.003	.007	.013	.003	.006	.012	.003	.006	.012	.F..LP
.S..GN	.010	.024	.042	.008	.018	.031	.007	.015	.027	.006	.014	.025	.006	.014	.024	.S..GN
.T..GN	.010	.026	.042	.008	.019	.031	.007	.017	.027	.006	.015	.025	.006	.015	.024	.T..GN
.S..HP	.010	.026	.042	.008	.019	.031	.007	.017	.027	.006	.015	.025	.006	.015	.024	.S..HP
.S..HN	.010	.026	.042	.008	.019	.031	.007	.017	.027	.006	.015	.025	.006	.015	.024	.S..HN

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.F..LP	.004	.008	.016	.003	.006	.012	.003	.005	.010	.002	.005	.009	.002	.005	.009	.F..LP
.F..GN	.004	.008	.016	.003	.006	.012	.003	.005	.010	.002	.005	.009	.002	.005	.009	.F..GN
.T..GN	.008	.020	.032	.006	.015	.023	.005	.013	.020	.005	.012	.019	.005	.012	.018	.T..GN
.S..GN	.008	.020	.032	.006	.015	.023	.005	.013	.020	.005	.012	.019	.005	.012	.018	.S..GN
.S..HP	.008	.020	.032	.006	.015	.023	.005	.013	.020	.005	.012	.019	.005	.012	.018	.S..HP

阅读全文View Less

Speeds

Recommended Starting Speeds [SFM]

Material Group		KC110M			KC510M			KC522M			KC725M			KCPM20			KCPK30			KTPK20
P	1	–	–	–	–	–	–	1300	1130	1060	1030	900	840	2170	1910	1760	1780	1560	1450	1440	1180	1010
	2	–	–	–	–	–	–	1080	950	790	860	760	640	1340	1210	1090	1100	1000	900	890	740	620
	3	–	–	–	–	–	–	1000	840	700	790	670	550	1210	1090	1000	1000	900	820	800	670	560
	4	–	–	–	960	780	660	890	730	590	710	590	470	910	840	760	740	690	620	600	520	430
	5	–	–	–	–	–	–	730	660	590	590	530	470	1090	980	900	1020	910	830	830	680	580
	6	–	–	–	–	–	–	650	490	400	520	400	310	760	660	570	620	540	–	500	410	–
M	1	–	–	–	–	–	–	800	710	650	670	590	540	880	790	680	820	720	620	940	770	650
	2	–	–	–	–	–	–	730	620	520	610	520	430	800	700	620	730	640	550	850	720	600
	3	–	–	–	–	–	–	550	480	370	460	400	310	640	570	490	570	520	460	640	530	–
K	1	510	480	450	1150	1040	940	900	820	720	–	–	–	1420	1280	1150	1160	1050	940	910	770	640
	2	450	420	390	910	820	760	710	640	590	–	–	–	1130	1010	920	920	830	760	720	590	520
	3	400	350	310	770	680	620	590	530	480	–	–	–	950	840	780	770	690	640	600	500	420
N	1–2	1980	1860	1770	2520	2240	2060	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	1620	1440	1260	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	160	140	110	140	120	100	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	160	140	110	140	120	100	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	200	160	110	180	140	100	–	–	–	–	–	–	–	–	–
	4	–	–	–	–	–	–	280	200	140	240	180	120	–	–	–	–	–	–	–	–	–
H	1	–	–	–	630	510	360	470	360	280	–	–	–	550	460	370	–	–	–	–	–	–

阅读全文View Less

You are about to leave the Solution building process.

Are you sure you want to leave?

物料号	1776013
公制样本编号	RDHX1604M0SGN
英制样本编号	RDHX1604M0SGN
材质	KC725M
[SSC] 刀片 IC 尺寸	16 mm
[SSC] 刀片 IC 尺寸	.6299 in
[S] 刀片厚度	4.76 mm
[S] 刀片厚度	.1875 in
平均切屑厚度 [HM]	0.21 mm
平均切屑厚度 [HM]	.0083 in

欢迎

请确认您的首选项

更新首选项

产品建议

Product Family suggestions

请联系销售团队

请联系销售团队

编辑解决方案

添加解决方案

产品类似于:

Round Inserts for KDM • RDHX-GN

Indexable Inserts • RD.X10...

物料号1776013

公制样本编号RDHX1604M0SGN英制样本编号RDHX1604M0SGN

工件材料

Features and benefits

High Performance Combination Tools

Feeds

5,00 轴向切深

2,00 轴向切深

1,00 轴向切深

0,50 轴向切深

At .197 Axial Depth of Cut (ap)

At .098 Axial Depth of Cut (ap)

At .049 Axial Depth of Cut (ap)

At .025 Axial Depth of Cut (ap)

Speeds

推荐初始速度 [m/min]

Recommended Starting Speeds [SFM]

产品建议

Product Family suggestions

请联系销售团队

Notifications

请联系销售团队

产品类似于:

Round Inserts for KDM • RDHX-GN

Indexable Inserts • RD.X10...

物料号1776013

公制样本编号RDHX1604M0SGN英制样本编号RDHX1604M0SGN

Sending to {{cadTool}} in progress...

工件材料

Features and benefits

High Performance Combination Tools

Feeds

5,00 轴向切深

2,00 轴向切深

1,00 轴向切深

0,50 轴向切深

At .197 Axial Depth of Cut (ap)

At .098 Axial Depth of Cut (ap)

At .049 Axial Depth of Cut (ap)

At .025 Axial Depth of Cut (ap)

Speeds

推荐初始速度 [m/min]

Recommended Starting Speeds [SFM]

The following files are available