Taladrado
Taladrado: Entrada inclinada
Taladrado: Salida inclinada
Taladrado: Placas apiladas
Dimensiones de la herramienta: 2 canales/4 márgenes/X/refrigerante
Taladrado — Con refrigeración interna
Mango — Liso cilíndrico ≤h6
Ángulo de la hélice: 0°
Drilling: Cross-Hole DrillingDownloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 1201024 |
| Referencia ISO | K411A01406 |
| Referencia ANSI | K411A01406 |
| Calidad | KF1 |
| Diámetro de broca M [D1] | 3.5712 mm |
| Diámetro de broca M [D1] | .1406 in |
| Longitud total [L] | 66 mm |
| Longitud total [L] | 2.598 in |
| Longitud del canal [L3] | 27.5 mm |
| Longitud del canal [L3] | 1.082 in |
| Profundidad máxima de taladrado [L4] | 21.4 mm |
| Profundidad máxima de taladrado [L4] | .8425 in |
| Longitud de punta de broca [L5] | 0.77 mm |
| Longitud de punta de broca [L5] | .0303 in |
| Longitud de mango [LS] | 36.5 mm |
| Longitud de mango [LS] | 1.437 in |
| Adaptador/Mango/Diá int [D] | 4.7625 mm |
| Adaptador/Mango/Diá int [D] | .1875 in |
TaladradoTaladrado: Entrada inclinadaTaladrado: Salida inclinadaTaladrado: Placas apiladasDimensiones de la herramienta: 2 canales/4 márgenes/X/refrigeranteTaladrado — Con refrigeración internaMango — Liso cilíndrico ≤h6Ángulo de la hélice: 0°Drilling: Cross-Hole DrillingGrades
KF1
Crear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Tolerancia • Sistema métrico | ||
| gama de tamaños nominales | D1 tolerancia k6 | D tolerancia h6 |
| 0,001/0,009 | 0,000/-0,008 | |
| 0,001/0,010 | 0,000/-0,009 | |
| 0,001/0,012 | 0,000/-0,011 | |
| 0,002/0,015 | 0,000/-0,013 | |
| Tolerancia • Pulgadas | ||
| gama de tamaños nominales | D1 tolerancia k6 | D tolerancia h6 |
| .0000/.0004 | .0000/-.0003 | |
| .0000/.0004 | .0000/-.0004 | |
| .0000/.0005 | .0000/-.0004 | |
| .0000/.0006 | .0000/-.0005 | |
| corto | largo | extralargo | |||||||||
| Ø | DIN 6535 | ~3 x D | ~5 x D | ~8 x D | |||||||
| D1 | D | LS min. | L | L3 | L4 | L | L3 | L4 | L | L3 | L4 |
| -1.40 | 4 | 28 | 58 | 7 | 5 | 58 | 9 | 6 | 58 | 12 | 10 |
| -1.90 | 4 | 28 | 58 | 9 | 6 | 58 | 12 | 9 | 58 | 18 | 15 |
| -2.30 | 4 | 28 | 58 | 13 | 9 | 58 | 18 | 14 | 66 | 26 | 22 |
| -2.99 | 4 | 28 | 58 | 17 | 12 | 58 | 22 | 17 | 66 | 30 | 25 |
| -3.75 | 6 | 36 | 62 | 20 | 14 | 66 | 28 | 23 | 78 | 40 | 33 |
| -4.75 | 6 | 36 | 66 | 24 | 17 | 74 | 36 | 29 | 87 | 49 | 41 |
| -6.00 | 6 | 36 | 66 | 28 | 20 | 82 | 44 | 35 | 94 | 56 | 48 |
| -7.00 | 8 | 36 | 79 | 34 | 24 | 91 | 53 | 43 | 105 | 67 | 57 |
| -8.00 | 8 | 36 | 79 | 41 | 29 | 91 | 53 | 43 | 110 | 72 | 61 |
| -10.00 | 10 | 40 | 89 | 47 | 35 | 103 | 61 | 49 | 122 | 80 | 68 |
| -12.00 | 12 | 45 | 102 | 55 | 40 | 118 | 71 | 56 | 141 | 94 | 79 |
| -14.00 | 14 | 45 | 107 | 60 | 43 | 124 | 77 | 60 | 155 | 108 | 91 |
| -16.00 | 16 | 48 | 115 | 65 | 45 | 133 | 83 | 63 | 171 | 121 | 101 |
| -18.00 | 18 | 48 | 123 | 73 | 51 | 143 | 93 | 71 | 185 | 135 | 113 |
| -20.00 | 20 | 50 | 131 | 79 | 55 | 153 | 101 | 77 | 200 | 148 | 124 |
| -22.00 | 20 | 50 | 141 | 86 | 60 | 167 | 112 | 85 | 217 | 162 | 136 |
| -25.00 | 25 | 56 | 153 | 95 | 65 | 184 | 126 | 98 | 238 | 180 | 150 |
| Grupo de materiales |  |  | ||||||||||||
| Velocidad de corte | Sistema métrico | |||||||||||||
| Rango | Avance recomendado (f) por diámetro | |||||||||||||
| Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | 25,4 | |||
| K | 1 | 115 | 120 | 140 | mm/r | 0,11–0,20 | 0,12–0,24 | 0,15–0,28 | 0,18–0,33 | 0,20–0,38 | 0,23–0,44 | 0,30–0,53 | 0,34–0,65 | 0,40–0,76 |
| N | 1 | 100 | 250 | 450 | mm/r | 0,12–0,25 | 0,13–0,29 | 0,16–0,35 | 0,20–0,42 | 0,26–0,50 | 0,32–0,57 | 0,36–0,69 | 0,42–0,82 | 0,59–0,96 |
| 2 | 200 | 250 | 300 | mm/r | 0,13–0,21 | 0,14–0,26 | 0,16–0,32 | 0,20–0,37 | 0,27–0,44 | 0,32–0,52 | 0,38–0,64 | 0,44–0,78 | 0,60–0,96 | |
| 3 | 100 | 150 | 300 | mm/r | 0,11–0,18 | 0,12–0,20 | 0,15–0,24 | 0,18–0,30 | 0,20–0,38 | 0,23–0,44 | 0,30–0,53 | 0,34–0,65 | 0,40–0,76 | |
| 4 | 100 | 170 | 250 | mm/r | 0,10–0,16 | 0,12–0,20 | 0,14–0,26 | 0,16–0,28 | 0,18–0,32 | 0,20–0,36 | 0,22–0,40 | 0,24–0,44 | 0,28–0,50 | |
| Grupo de materiales | | | ||||||||||||
| Grupo de materiales | Velocidad de corte | Pulgadas | ||||||||||||
| Rango | Avance recomendado (f) por diámetro | |||||||||||||
| Mín | Valor inicial | Máx. | 1/8 0.125 | 3/16 0.188 | 1/4 0.250 | 5/16 0.313 | 3/8 0.375 | 1/2 0.500 | 5/8 0.625 | 3/4 0.750 | 1/1 1.000 | |||
| K | 1 | 380 | 390 | 460 | IPR | 0.004–0.008 | 0.005–0.009 | 0.006–0.011 | 0.007–0.013 | 0.008–0.015 | 0.009–0.017 | 0.012–0.021 | 0.013–0.026 | 0.016–0.030 |
| N | 1 | 330 | 820 | 1480 | IPR | 0.005–0.010 | 0.005–0.011 | 0.006–0.014 | 0.008–0.017 | 0.010–0.020 | 0.013–0.022 | 0.014–0.027 | 0.017–0.032 | 0.023–0.038 |
| 2 | 660 | 820 | 980 | IPR | 0.005–0.008 | 0.006–0.010 | 0.006–0.013 | 0.008–0.015 | 0.011–0.017 | 0.013–0.021 | 0.015–0.025 | 0.017–0.031 | 0.024–0.038 | |
| 3 | 330 | 490 | 980 | IPR | 0.004–0.007 | 0.005–0.008 | 0.006–0.009 | 0.007–0.012 | 0.008–0.015 | 0.009–0.017 | 0.012–0.021 | 0.013–0.026 | 0.016–0.030 | |
| 4 | 330 | 560 | 820 | IPR | 0.004–0.006 | 0.005–0.008 | 0.006–0.010 | 0.006–0.011 | 0.007–0.013 | 0.008–0.014 | 0.009–0.016 | 0.009–0.017 | 0.011–0.020 | |
| | |||||||||||||
| Velocidad de corte | Sistema métrico | |||||||||||||
| Rango | Avance recomendado (f) por diámetro | |||||||||||||
| Grupo de materiales | Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | 25,4 | ||
| K | 1 | 115 | 60 | 140 | mm/dev | 0,11–0,20 | 0,12–0,24 | 0,15–0,28 | 0,18–0,33 | 0,20–0,38 | 0,23–0,44 | 0,30–0,53 | 0,34–0,65 | 0,40–0,76 |
| N | 1 | 100 | 250 | 450 | mm/dev | 0,16–0,25 | 0,19–0,29 | 0,23–0,35 | 0,27–0,42 | 0,31–0,50 | 0,36–0,57 | 0,44–0,69 | 0,52–0,82 | 0,62–0,96 |
| 2 | 200 | 100 | 300 | mm/dev | 0,15–0,23 | 0,17–0,28 | 0,21–0,34 | 0,25–0,39 | 0,30–0,46 | 0,34–0,54 | 0,42–0,67 | 0,52–0,82 | 0,61–0,96 | |
| 4 | 100 | 170 | 250 | mm/dev | 0,16–0,28 | 0,15–0,32 | 0,19–0,36 | 0,23–0,40 | 0,25–0,44 | 0,28–0,48 | 0,32–0,56 | 0,35–0,63 | 0,42–0,72 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?