Country

Idioma

Unidade de medida

Sugestões de produtos

HARVI™ III Solid Carbide End Mill for 3D Profiling with Highest Productivity

HARVI™ III • Ball Nose • 6 Flutes • Necked • Plain Shank • Inch

Name: HARVI™ III • Ball Nose • 6 Flutes • Necked • Plain Shank • Inch
SKU: 100024211
Rating: 0 (0 reviews)

HARVI™ III Solid Carbide End Mill for 3D Profiling with Highest Productivity

Características e benefícios

Versatile solid carbide end mill for steels, stainless steel, and high-temperature alloys.

HARVI™ III solid carbide end mills cover a variety of operations.

HARVI™ III solid carbide end mills feature unequal flute spacing for chatter-free machining at highest feed rates.

Eccentric relief grind for higher edge stability and higher feed rates.

Centre cutting for plunging and ramping operations.

Usos e aplicações

Ball Nose Trochoidal Milling
Fresamento lateral/fresamento de canto: ponta esférica
Fresamento de perfil 3D
Dimensões da ferramenta: Configuração de canal: 6
Ângulo de hélice: 38°

End Mill Tolerances
D1	tolerance	D	tolerance h6 + / -
All	+.000/- .002"	≤1/8"	+0/-.00024"
		1/8 1/4"	+0/-.00031"
		1/4 3/8"	+0/-.00035"
		3/8 23/32"	+0/-.00043"
		23/32 1-3/16"	0/.00051"

HARVI III • UJBE • Ball Nose • Unequal Flute Spacing • Roughing

Material Group				KCSM15A		Recommended feed per tooth (IPT = inch/th) for side milling.
				Cutting Speed vc SFM			D1 Diameter
				Cutting Speed vc SFM		frac.	1/8	3/16	1/4	5/16	3/8	7/16	1/2	5/8	3/4	1	1 1/4
		ap	ae	min	max	dec.	.1250	.1875	.2500	.3125	.3750	.4375	.5000	.6250	.7500	1.0000	1.2500
P	0	Ap max	0.4 x D	490	660	IPT	0.0009	0.0013	0.0018	0.0023	0.0027	0.0031	0.0034	0.0039	0.0044	0.0049	0.0049
	1	Ap max	0.4 x D	490	660	IPT	0.0009	0.0013	0.0018	0.0023	0.0027	0.0031	0.0034	0.0039	0.0044	0.0049	0.0049
	2	Ap max	0.4 x D	460	620	IPT	0.0009	0.0013	0.0018	0.0023	0.0027	0.0031	0.0034	0.0039	0.0044	0.0049	0.0049
	3	Ap max	0.4 x D	390	520	IPT	0.0007	0.0011	0.0015	0.0020	0.0023	0.0026	0.0029	0.0034	0.0039	0.0045	0.0048
	4	Ap max	0.4 x D	300	490	IPT	0.0007	0.0010	0.0014	0.0017	0.0020	0.0023	0.0026	0.0030	0.0034	0.0039	0.0040
	5	Ap max	0.4 x D	200	330	IPT	0.0006	0.0009	0.0012	0.0016	0.0018	0.0021	0.0023	0.0027	0.0031	0.0036	0.0039
	6	Ap max	0.4 x D	160	250	IPT	0.0005	0.0008	0.0010	0.0013	0.0015	0.0017	0.0019	0.0022	0.0025	0.0028	0.0029
M	1	Ap max	0.4 x D	300	380	IPT	0.0007	0.0011	0.0015	0.0020	0.0023	0.0026	0.0029	0.0034	0.0039	0.0045	0.0048
	2	Ap max	0.4 x D	200	260	IPT	0.0006	0.0009	0.0012	0.0016	0.0018	0.0021	0.0023	0.0027	0.0031	0.0036	0.0039
	3	Ap max	0.4 x D	200	230	IPT	0.0005	0.0008	0.0010	0.0013	0.0015	0.0017	0.0019	0.0022	0.0025	0.0028	0.0029
S	1	Ap max	0.4 x D	160	300	IPT	0.0007	0.0011	0.0015	0.0020	0.0023	0.0026	0.0029	0.0034	0.0039	0.0045	0.0048
	2	Ap max	0.4 x D	80	160	IPT	0.0004	0.0006	0.0008	0.0010	0.0012	0.0014	0.0015	0.0018	0.0021	0.0024	0.0026
	3	Ap max	0.4 x D	80	130	IPT	0.0004	0.0006	0.0008	0.0010	0.0012	0.0014	0.0015	0.0018	0.0021	0.0024	0.0026
	4	Ap max	0.4 x D	160	200	IPT	0.0005	0.0008	0.0011	0.0014	0.0017	0.0019	0.0021	0.0025	0.0028	0.0033	0.0036
H	1	Ap max	0.4 x D	260	460	IPT	0.0007	0.0010	0.0014	0.0017	0.0020	0.0023	0.0026	0.0030	0.0034	0.0039	0.0040

HARVI III • UJBE • Ball Nose • Unequal Flute Spacing • Roughing

Material Group				KCSM15A		Recommended feed per tooth (IPT = inch/th) for side milling.
				Cutting Speed vc SFM			D1 Diameter
				Cutting Speed vc SFM		frac.	1/8	3/16	1/4	5/16	3/8	7/16	1/2	5/8	3/4	1	1 1/4
		ap	ae	min	max	dec.	.1250	.1875	.2500	.3125	.3750	.4375	.5000	.6250	.7500	1.0000	1.2500
P	0	Ap max	0.06 x D	940	1250	IPT	0.0011	0.0016	0.0022	0.0028	0.0033	0.0037	0.0041	0.0047	0.0053	0.0059	0.0059
	1	Ap max	0.06 x D	940	1250	IPT	0.0011	0.0016	0.0022	0.0028	0.0033	0.0037	0.0041	0.0047	0.0053	0.0059	0.0059
	2	Ap max	0.06 x D	870	1180	IPT	0.0011	0.0016	0.0022	0.0028	0.0033	0.0037	0.0041	0.0047	0.0053	0.0059	0.0059
	3	Ap max	0.06 x D	750	1000	IPT	0.0009	0.0013	0.0018	0.0023	0.0027	0.0031	0.0035	0.0041	0.0046	0.0054	0.0058
	4	Ap max	0.06 x D	560	940	IPT	0.0008	0.0012	0.0017	0.0021	0.0025	0.0028	0.0031	0.0036	0.0040	0.0046	0.0048
	5	Ap max	0.06 x D	370	620	IPT	0.0007	0.0011	0.0015	0.0019	0.0022	0.0025	0.0028	0.0033	0.0037	0.0043	0.0047
	6	Ap max	0.06 x D	310	470	IPT	0.0006	0.0009	0.0012	0.0016	0.0018	0.0021	0.0023	0.0027	0.0030	0.0034	0.0035
M	1	Ap max	0.06 x D	560	720	IPT	0.0009	0.0013	0.0018	0.0023	0.0027	0.0031	0.0035	0.0041	0.0046	0.0054	0.0058
	2	Ap max	0.06 x D	370	500	IPT	0.0007	0.0011	0.0015	0.0019	0.0022	0.0025	0.0028	0.0033	0.0037	0.0043	0.0047
	3	Ap max	0.06 x D	370	440	IPT	0.0006	0.0009	0.0012	0.0016	0.0018	0.0021	0.0023	0.0027	0.0030	0.0034	0.0035
S	1	Ap max	0.06 x D	310	560	IPT	0.0009	0.0013	0.0018	0.0023	0.0027	0.0031	0.0035	0.0041	0.0046	0.0054	0.0058
	2	Ap max	0.06 x D	160	310	IPT	0.0005	0.0007	0.0010	0.0012	0.0015	0.0017	0.0018	0.0022	0.0025	0.0029	0.0032
	3	Ap max	0.06 x D	160	250	IPT	0.0005	0.0007	0.0010	0.0012	0.0015	0.0017	0.0018	0.0022	0.0025	0.0029	0.0032
	4	Ap max	0.06 x D	310	370	IPT	0.0006	0.0009	0.0013	0.0017	0.0020	0.0023	0.0026	0.0030	0.0034	0.0040	0.0043
H	1	Ap max	0.06 x D	500	870	IPT	0.0008	0.0012	0.0017	0.0021	0.0025	0.0028	0.0031	0.0036	0.0040	0.0046	0.0048

Bem-vindo!

Confirme suas preferências

Atualizar preferências

Sugestões de produtos

Product Family suggestions

Entre em contato com Dpto. Comercial

Entre em contato com Dpto. Comercial

Editando solução

Adicionando solução

HARVI™ III • Ball Nose • 6 Flutes • Necked • Plain Shank • Inch

HARVI™ III Solid Carbide End Mill for 3D Profiling with Highest Productivity

Características e benefícios

Usos e aplicações

HARVI III • UJBE • Ball Nose • Unequal Flute Spacing • Roughing

HARVI III • UJBE • Ball Nose • Unequal Flute Spacing • Roughing

Sugestões de produtos

Product Family suggestions

Entre em contato com Dpto. Comercial

Notificações

Entre em contato com Dpto. Comercial

Sending to {{cadTool}} in progress...

HARVI™ III • Ball Nose • 6 Flutes • Necked • Plain Shank • Inch

HARVI™ III Solid Carbide End Mill for 3D Profiling with Highest Productivity

Características e benefícios

Usos e aplicações

HARVI III • UJBE • Ball Nose • Unequal Flute Spacing • Roughing

HARVI III • UJBE • Ball Nose • Unequal Flute Spacing • Roughing

The following files are available